As we now store enough information in the device_node.

Also the Flags field was not used either, do remove that.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

As we now store enough information in the device_node to allocate the
irq number in pcibios_final_fixup.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We can now scan the list of device nodes instead.  This also allows us
to remove the Device_list member of struct pci_dn.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Move the probing of PCI devices to setup.c and put them all into the
flattened device tree.  The later probing is now done by traversing the
device tree.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This function was removed during iSeries cleanup but will prove useful
in the following patches.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Remove some unused counters.

No need to allocate iomm_table and iobar_table, which means that
iomm_table_initialize is not longer needed.

Use kzalloc where sensible.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

A devtree compiler (dtc) generated devtree blob is "relocatable" and so
does not contain a reserved_map entry for the blob itself.  This means
that if passed to Linux, Linux will not get lmb_reserve() the blob and
it could be over.  The following patch will explicitly reserve the
"blob" as it was given to us and stops prom_init.c from creating a
reserved mapping for the blob.

NOTE: that the dtc/kexec should not generate the blob reservation entry.
Although if they do, LMB reserver handles overlaps.
Signed-off-by: N  <jimix@watson.ibm.com>
Acked-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

So the IOMMU table building code needs to match.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Change the pseries iommu init code to use the new of_parse_dma_window()
to parse the ibm,dma-window and ibm,my-dma-window properties of pci and
virtual device nodes.

Also, clean up vio_build_iommu_table() a little.

Tested on pseries, with both vio and pci devices.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add a function for generic parsing of dma-window properties (ie,
ibm,dma-window and ibm,my-dma-window) of pci and virtual device nodes.

This function will also be used by cell.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch allows the compiler to catch any printf-like mismatches for
udbg_printf().  After some brute force building I've only found issues
with my own code and lparcfg.c It could break some developers, but
IMHO that would be goodness.
Signed-off-by: NJimi Xenidis <jimix@watson.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This was missing a quilt ref.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We need to know the base address of the kdump kernel even when we're not a
kdump kernel, so add a #define for it. Move the logic that sets the kdump
kernelbase into kdump.h instead of page.h.

Rename kdump_setup() to setup_kdump_trampoline() to make it clearer what it's
doing, and add an empty definition for the !CRASH_DUMP case to avoid a
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

We currently do mem= handling in three seperate places. And as benh pointed out
I wrote two of them. Now that we parse command line parameters earlier we can
clean this mess up.

Moving the parsing out of prom_init means the device tree might be allocated
above the memory limit. If that happens we'd have to move it. As it happens
we already have logic to do that for kdump, so just genericise it.

This also means we might have reserved regions above the memory limit, if we
do the bootmem allocator will blow up, so we have to modify
lmb_enforce_memory_limit() to truncate the reserves as well.

Tested on P5 LPAR, iSeries, F50, 44p. Tested moving device tree on P5 and
44p and F50.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Currently we have call parse_early_param() earliyish, but not really very
early. In particular, it's not early enough to do things like mem=x or
crashkernel=blah, which is annoying.

So do it earlier. I've checked all the early param handlers, and none of them
look like they should have any trouble with this. I haven't tested the
booke_wdt ones though.

On 32-bit we were doing the CONFIG_CMDLINE logic twice, so don't.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Currently early_xmon() calls directly into debugger() if xmon=early is passed.
This ties the invocation of early xmon to the location of parse_early_param(),
which might change.

Tested on P5 LPAR and F50.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Use the existence of RTAS device tree node to determine if
/proc/rtas. /proc/ppc64/rtas are to be created.  Using machine type
is not reliable (i.e. Maple-like machines may have RTAS).
Signed-off-by: NMichal Ostrowski <mostrows@watson.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Make their device_type entries more generic and their compatible entries
more specific.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Make it look more like the pSeries vdevice tree.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

These devices should have device_type block and a unique compatible entry.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Make the device-tree information more generic and more
like the pSeries virtual lan device. Also use the MAC
address from the device tree.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

In reg.h we mostly have #define<space> but there are a few #define<tab>
around.  Clean these up so we use space exclusively.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

If you undefine all the early debugging options and then run make oldconfig,
you don't get prompted to see if you want to enable any of them. This is
annoying.

AFAICT we can't do this just with a choice, because the choice is either
optional, in which case we don't get prompted, or not in which case we _must_
select early debugging.

So add a bool which controls whether we have early debugging at all, and then
if that's enabled provide the choice. The extra bool will actually be useful
in another patch I have lying around, so this is a win-win.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Removed the do-nothing routines __setup_cpu_power3 and
__setup_cpu_power4 and replaced them with a null pointer check
in the caller.  Also removed the Cell processor specific
routine __setup_cpu_be which improperly accessed the
hypervisor page size configuration at SPR HID6.
Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

When a PCI device driver does not support PCI error recovery,
the powerpc/pseries code takes a walk through a branch of code
that resets the failure counter. Because of this, if a broken
PCI card is present, the kernel will attempt to reset it an
infinite number of times. (This is annoying but mostly harmless:
each reset takes about 10-20 seconds, and uses almost no CPU time).

This patch preserves the failure count across resets.
Signed-off-by: NLinas Vepstas <linas@austin.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Re-enable posted writes for status FIFO.

Besides bringing back a very minor bandwidth tweak from Linux 2.6.15.x
and older, this also fixes an interoperability regression since 2.6.16:

   http://bugzilla.kernel.org/show_bug.cgi?id=6356
   (sbp2: scsi_add_device failed. IEEE1394 HD is not working anymore.)
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: NVanei Heidemann <linux@javanei.com.br>
Tested-by: Martin Putzlocher <mputzi@gmx.de> (chip type unconfirmed)
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In case the blacklist with workarounds for device bugs yields a false
positive, the module load parameter can now also be used as an override
instead of an addition to the blacklist.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Apple decided to copy some USB stupidity over to FireWire.

The sector number returned by iPods from read_capacity is one too many.
This may cause I/O errors, especially if the kernel is configured for EFI
partition support. We use the same workaround as usb-storage but have to
check for different model IDs.

	http://marc.theaimsgroup.com/?t=114233262300001
	https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=187409

Acknowledgements:
  Diagnosis and therapy by Mathieu Chouquet-Stringer <ml2news@free.fr>,
  additional data about affected and unaffected Apple hardware from
  Vladimir Kotal, Sander De Graaf, Bryan Olmstead and Hugh Dixon.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Grand unification of the three types of workarounds we have so far.

The "skip mode page 8" workaround is now limited to devices which
pretend to be of TYPE_DISK instead of TYPE_RBC. This workaround is no
longer enabled for Initio bridges.

Patch update in anticipation of more workarounds:
 - Add module parameter "workarounds".
 - Deprecate parameter "force_inquiry_hack".
 - Compose the blacklist of a compound type for better readability and
   extensibility.
 - Remove a now unused #define.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6:
  [TCP]: reno sacked_out count fix
  [IPV6]: Endian fix in net/ipv6/netfilter/ip6t_eui64.c:match().
  [TR]: Remove an unused export.
  [IPX]: Correct return type of ipx_map_frame_type().
  [IPX]: Correct argument type of ipxrtr_delete().
  [PKT_SCHED]: Potential jiffy wrap bug in dev_watchdog().

* git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/netdev-2.6:
  sky2: prevent dual port receiver problems
  x86_64: Check for bad dma address in b44 1GB DMA workaround
  The ixp2000 driver for the enp2611 was developed on a board with

* 'upstream-linus' of git://oss.oracle.com/home/sourcebo/git/ocfs2:
  configfs: Make sure configfs_init() is called before consumers.
  configfs: configfs_mkdir() failed to cleanup linkage.
  configfs: Fix a reference leak in configfs_mkdir().
  ocfs2: fix gfp mask in some file system paths
  ocfs2: Don't populate uptodate cache in ocfs2_force_read_journal()
  ocfs2: take meta data lock in ocfs2_file_aio_read()
  ocfs2: take data locks around extend

configfs_init() needs to be called first to register configfs before anyconsumers try to access it.  Move up configfs in fs/Makefile to make
sure it is initialized early.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

If configfs_mkdir() errored in certain ways after the parent<->child
linkage was already created, it would not undo the linkage.  Also,
comment the reference counting for clarity.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

configfs_mkdir() failed to release the working parent reference in most
exit paths.  Also changed the exit path for readability.
Signed-off-by: NJoel Becker <joel.becker@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

We were using GFP_KERNEL in a handful of places which really wanted
GFP_NOFS. Fix this.
Signed-off-by: NSunil Mushran <sunil.mushran@oracle.com>
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

This greatly reduces the amount of memory useded during recovery.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>

Temporarily take the meta data lock in ocfs2_file_aio_read() to allow us to
update our inode fields.
Signed-off-by: NMark Fasheh <mark.fasheh@oracle.com>