- 22 6月, 2019 37 次提交
-
-
由 Luca Ceresoli 提交于
This paragraph was added by commit a42b57f5 ("V4L/DVB: Documentation: add v4l2-controls.txt documenting the new controls API") back in 2010, when the controls API has been improved. Nowadays it is a bit anachronistic, so remove it. The same information is stated in up-to-date wording a few paragraphs later > You’re done! And this is sufficient for most of the drivers we have. No > need to do any validation of control values, or implement QUERYCTRL, > QUERY_EXT_CTRL and QUERYMENU. And G/S_CTRL as well as G/TRY/S_EXT_CTRLS > are automatically supported. Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Luca Ceresoli 提交于
The tutorial in this section is almost complete, add the one missing bit. Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Luca Ceresoli 提交于
All these code blocks contain C code, enable C formatting for a nicer reading. Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Luca Ceresoli 提交于
This section lacks links to functions. Add one to simplify reading. Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Luca Ceresoli 提交于
The code snippet showing how to add controls to the driver’s top-level struct is present twice, but only the second time it is split in the V4L2 and subdev cases. Consolidate everything at the beginning. Also remove the "Where foo->bar is of type struct baz" sentences, this obvious from the code. Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Luca Ceresoli 提交于
This section lacks links to struct definitions. Add one where each struct is introduced. Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Luca Ceresoli 提交于
Fix indentation in example C code. Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Luca Ceresoli 提交于
Mentioning :ref:`VIDIOC_QUERYCTRL` renders all the three related ioctls. Explicitly adding VIDIOC_QUERY_EXT_CTRL and VIDIOC_QUERYMENU will make them render twice, so remove them Signed-off-by: NLuca Ceresoli <luca@lucaceresoli.net> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Marek Szyprowski 提交于
Since the beginning the second clock ('special', 'sclk') was optional and it is not available on some variants of Exynos SoCs (i.e. Exynos5420 with v7 of MFC hardware). However commit 1bce6fb3 ("[media] s5p-mfc: Rework clock handling") made handling of all specified clocks mandatory. This patch restores original behavior of the driver and fixes its operation on Exynos5420 SoCs. Fixes: 1bce6fb3 ("[media] s5p-mfc: Rework clock handling") Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Maxime Jourdan 提交于
Both MESON AO CEC and MESON VIDEO DECODER point to the wrong linux-media mailing list. Update it to linux-media@vger.kernel.org. Signed-off-by: NMaxime Jourdan <mjourdan@baylibre.com> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Shuah Khan 提交于
Fix v4l2_fourcc define to use "U" cast to avoid shifting signed 32-bit value by 31 bits problem. This isn't a problem for kernel builds with gcc. This could be problem since this header is part of public API which could be included for builds using compilers that don't handle this condition safely resulting in undefined behavior. Signed-off-by: NShuah Khan <skhan@linuxfoundation.org> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Shuah Khan 提交于
Fix MEDIA_ENT_ID_FLAG_NEXT to use "U" cast to avoid shifting signed 32-bit value by 31 bits problem. This isn't a problem for kernel builds with gcc. This could be problem since this header is part of public API which could be included for builds using compilers that don't handle this condition safely resulting in undefined behavior. Signed-off-by: NShuah Khan <skhan@linuxfoundation.org> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Niklas Söderlund 提交于
After the rework of the Gen2 file operations it's now trivial to merge the Gen2 and Gen3 versions. Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: NUlrich Hecht <uli+renesas@fpond.eu> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Niklas Söderlund 提交于
The function no longer serve a purpose as most tasks it performed have been refactored, fold what remains of it into the only caller. While at it add error checking for v4l2_ctrl_handler_setup(). Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: NUlrich Hecht <uli+renesas@fpond.eu> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Niklas Söderlund 提交于
The two power helpers are now only dealing with the parallel subdevice, merge them into a single rvin_power_parallel() helper to reduce code duplication. Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: NUlrich Hecht <uli+renesas@fpond.eu> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Niklas Söderlund 提交于
The helpers rvin_power_{on,off} deal with both VIN and the parallel subdevice power. This makes it hard to merge the Gen2 and Gen3 open/release functions. Move the VIN power handling directly to the open/release functions to prepare for the merge. Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: NUlrich Hecht <uli+renesas@fpond.eu> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Niklas Söderlund 提交于
The format is already synced when the subdevice is bound, there is no need to do do it every time the video device is opened. Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: NUlrich Hecht <uli+renesas@fpond.eu> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Niklas Söderlund 提交于
The user should be allowed to break waiting for the lock when opening the video device. Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: NUlrich Hecht <uli+renesas@fpond.eu> Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Niklas Söderlund 提交于
Runtime PM is already enabled unconditionally when the driver is probed and disabled when it's removed. There is no point in doing it again for Gen2 when opening and closing the video device. Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: NUlrich Hecht <uli+renesas@fpond.eu> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Niklas Söderlund 提交于
The driver does not implement runtime resume and suspend function so there is little point in trying to call them. This is a leftover from the drivers soc_camera beginnings. Signed-off-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: NUlrich Hecht <uli+renesas@fpond.eu> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Anders Roxell 提交于
When building with CONFIG_VIDEO_ADV7511 and CONFIG_DRM_I2C_ADV7511 enabled as loadable modules, we see the following warning: drivers/gpu/drm/bridge/adv7511/adv7511.ko drivers/media/i2c/adv7511.ko Rework so that the file is named adv7511-v4l2.c. Signed-off-by: NAnders Roxell <anders.roxell@linaro.org> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Colin Ian King 提交于
The pointer mpeg12 is being initialized however that value is never read and mpeg12 is being re-assigned almost immediately afterwards. Remove the redundant initialization. Signed-off-by: NColin Ian King <colin.king@canonical.com> Acked-by: NMaxime Jourdan <mjourdan@baylibre.com> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Eugen Hristev 提交于
Fixed issues that can lead to potential bugs. Cleanup order in the driver Taking into consideration std control creation can fail mutex_destroy call changing controller_formats with const specifier some cosmetic cleanups Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Eugen Hristev 提交于
This splits the Atmel ISC driver into a common base: atmel-isc-base.c and the driver probe/dt part , atmel-sama5d2-isc.c This is needed to keep a common ground for the sensor controller which will be reused. The atmel-isc will use the common symbols inside the atmel-isc-base Future driver will also use the same symbols and redefine different aspects, for a different version of the ISC. This is done to avoid complete code duplication by creating a totally different driver for the new variant of the ISC. Signed-off-by: NEugen Hristev <eugen.hristev@microchip.com> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: folded 'atmel: atmel-sama5d2-isc: fixed checkpatch warnings' into this patch] Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Rui Miguel Silva 提交于
When the upstream endpoint is neither a mux nor a CSI2 module, just get the source pad directly upstream from the CSI. Reported-by: NSebastien Szymanski <sebastien.szymanski@armadeus.com> Signed-off-by: NRui Miguel Silva <rui.silva@linaro.org> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Tomasz Figa 提交于
When the application calls VIDIOC_DQBUF with the DMABUF memory type, the v4l2_buffer structure (or v4l2_plane structures) are filled with DMA-buf file descriptors. However, the current documentation does not explain whether those are new file descriptors referring to the same DMA-bufs or just the same integers as passed to VIDIOC_QBUF back in time. Clarify the documentation that it's the latter. Signed-off-by: NTomasz Figa <tfiga@chromium.org> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Ezequiel Garcia 提交于
Use the newly introduced vb2_get_buffer API and avoid accessing buffers in the queue directly. Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Ezequiel Garcia 提交于
Use the newly introduced vb2_get_buffer API and avoid accessing buffers in the queue directly. Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: fixed checkpatch alignment warning] Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Ezequiel Garcia 提交于
Use the newly introduced vb2_get_buffer API and avoid accessing buffers in the queue directly. Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Ezequiel Garcia 提交于
Some drivers need to access a vb2 buffer from its queue index. Introduce an accessor to abstract this, and avoid drivers from accessing private members. Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com> Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com> Acked-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Colin Ian King 提交于
There are three error return paths that don't kfree params causing a memory leak. Fix this by adding an error return path that kfree's params before returning. Also add a check to see params failed to be allocated. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Dan Carpenter 提交于
Thus the address of "&ctx->dev->variant->codec_ops[codec_mode]" can't possibly be NULL. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com> [hverkuil-cisco@xs4all.nl: rebased after rockchip/vpu -> hantro rename] Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Ezequiel Garcia 提交于
These two control types don't really need a default value, as they are not expected to carry any value. However, it's slightly clearer to initialize them explicitly instead of falling back to the switch default. Signed-off-by: NEzequiel Garcia <ezequiel@collabora.com> Reviewed-by: NBoris Brezillon <boris.brezillon@collabora.com> Signed-off-by: NHans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Mauro Carvalho Chehab 提交于
Linux 5.2-rc5 There are some media fixes on -rc5, so merge from it at media devel tree. * tag 'v5.2-rc5': (210 commits) Linux 5.2-rc5 x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback Smack: Restore the smackfsdef mount option and add missing prefixes ftrace: Fix NULL pointer dereference in free_ftrace_func_mapper() module: Fix livepatch/ftrace module text permissions race tracing/uprobe: Fix obsolete comment on trace_uprobe_create() tracing/uprobe: Fix NULL pointer dereference in trace_uprobe_create() tracing: Make two symbols static tracing: avoid build warning with HAVE_NOP_MCOUNT tracing: Fix out-of-range read in trace_stack_print() gfs2: Fix rounding error in gfs2_iomap_page_prepare x86/kasan: Fix boot with 5-level paging and KASAN timekeeping: Repair ktime_get_coarse*() granularity Revert "ALSA: hda/realtek - Improve the headset mic for Acer Aspire laptops" mm/devm_memremap_pages: fix final page put race PCI/P2PDMA: track pgmap references per resource, not globally lib/genalloc: introduce chunk owners PCI/P2PDMA: fix the gen_pool_add_virt() failure path mm/devm_memremap_pages: introduce devm_memunmap_pages drivers/base/devres: introduce devm_release_action() ...
-
由 Sean Young 提交于
The IR signal to control the Panasonic ACXA75C00600 air conditioner has 439 pulse/spaces. Increase limit to make it possible to transmit signal. Reported-by: NTakashi Kanamaru <neuralassembly@gmail.com> Signed-off-by: NSean Young <sean@mess.org> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 YueHaibing 提交于
If RC_CORE is not set, building fails: Reported-by: NHulk Robot <hulkci@huawei.com> Suggested-by: NSean Young <sean@mess.org> Signed-off-by: NYueHaibing <yuehaibing@huawei.com> Signed-off-by: NSean Young <sean@mess.org> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
由 Colin Ian King 提交于
There two callers of stv090x_setup_compound manage the allocation and freeing if state there is an error condition from stv090x_setup_compound. Currently function stv090x_setup_compound also frees the state object too, leading to a double free in the callers of this function. Fix this by removing the extraneous free in stv090x_setup_compound and just leave the callers handle the allocation/free'ing. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NSean Young <sean@mess.org> Signed-off-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
- 17 6月, 2019 3 次提交
-
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: "The accumulated fixes from this and last week: - Fix vmalloc TLB flush and map range calculations which lead to stale TLBs, spurious faults and other hard to diagnose issues. - Use fault_in_pages_writable() for prefaulting the user stack in the FPU code as it's less fragile than the current solution - Use the PF_KTHREAD flag when checking for a kernel thread instead of current->mm as the latter can give the wrong answer due to use_mm() - Compute the vmemmap size correctly for KASLR and 5-Level paging. Otherwise this can end up with a way too small vmemmap area. - Make KASAN and 5-level paging work again by making sure that all invalid bits are masked out when computing the P4D offset. This worked before but got broken recently when the LDT remap area was moved. - Prevent a NULL pointer dereference in the resource control code which can be triggered with certain mount options when the requested resource is not available. - Enforce ordering of microcode loading vs. perf initialization on secondary CPUs. Otherwise perf tries to access a non-existing MSR as the boot CPU marked it as available. - Don't stop the resource control group walk early otherwise the control bitmaps are not updated correctly and become inconsistent. - Unbreak kgdb by returning 0 on success from kgdb_arch_set_breakpoint() instead of an error code. - Add more Icelake CPU model defines so depending changes can be queued in other trees" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode, cpuhotplug: Add a microcode loader CPU hotplug callback x86/kasan: Fix boot with 5-level paging and KASAN x86/fpu: Don't use current->mm to check for a kthread x86/kgdb: Return 0 from kgdb_arch_set_breakpoint() x86/resctrl: Prevent NULL pointer dereference when local MBM is disabled x86/resctrl: Don't stop walking closids when a locksetup group is found x86/fpu: Update kernel's FPU state before using for the fsave header x86/mm/KASLR: Compute the size of the vmemmap section properly x86/fpu: Use fault_in_pages_writeable() for pre-faulting x86/CPU: Add more Icelake model numbers mm/vmalloc: Avoid rare case of flushing TLB with weird arguments mm/vmalloc: Fix calculation of direct map addr range
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull timer fixes from Thomas Gleixner: "A set of small fixes: - Repair the ktime_get_coarse() functions so they actually deliver what they are supposed to: tick granular time stamps. The current code missed to add the accumulated nanoseconds part of the timekeeper so the resulting granularity was 1 second. - Prevent the tracer from infinitely recursing into time getter functions in the arm architectured timer by marking these functions notrace - Fix a trivial compiler warning caused by wrong qualifier ordering" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timekeeping: Repair ktime_get_coarse*() granularity clocksource/drivers/arm_arch_timer: Don't trace count reader functions clocksource/drivers/timer-ti-dm: Change to new style declaration
-