This patch creates a new invisible Kconfig option CRYPTO_RNG_DEFAULT
that simply selects the DRBG.  This new option is then selected
by the IV generators.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

As this is required by many IPsec algorithms, let's set the default
to m.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the stdrng module alias and increases the priority
to ensure that it is loaded in preference to other RNGs.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We currently do the IV seeding on the first givencrypt call in
order to conserve entropy.  However, this does not work with
DRBG which cannot be called from interrupt context.  In fact,
with DRBG we don't need to conserve entropy anyway.  So this
patch moves the seeding into the init function.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We currently do the IV seeding on the first givencrypt call in
order to conserve entropy.  However, this does not work with
DRBG which cannot be called from interrupt context.  In fact,
with DRBG we don't need to conserve entropy anyway.  So this
patch moves the seeding into the init function.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We currently do the IV seeding on the first givencrypt call in
order to conserve entropy.  However, this does not work with
DRBG which cannot be called from interrupt context.  In fact,
with DRBG we don't need to conserve entropy anyway.  So this
patch moves the seeding into the init function.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We currently do the IV seeding on the first givencrypt call in
order to conserve entropy.  However, this does not work with
DRBG which cannot be called from interrupt context.  In fact,
with DRBG we don't need to conserve entropy anyway.  So this
patch moves the seeding into the init function.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Reduce the nx-842 pSeries driver minimum buffer size from 128 to 8.
Also replace the single use of IO_BUFFER_ALIGN macro with the standard
and correct DDE_BUFFER_ALIGN.

The hw sometimes rejects buffers that contain padding past the end of the
8-byte aligned section where it sees the "end" marker.  With the minimum
buffer size set too high, some highly compressed buffers were being padded
and the hw was incorrectly rejecting them; this sets the minimum correctly
so there will be no incorrect padding.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NMartin Willi <martin@strongswan.org>
Acked-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NMartin Willi <martin@strongswan.org>
Acked-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

draft-ietf-ipsecme-chacha20-poly1305 defines the use of ChaCha20/Poly1305 in
ESP. It uses additional four byte key material as a salt, which is then used
with an 8 byte IV to form the ChaCha20 nonce as defined in the RFC7539.
Signed-off-by: NMartin Willi <martin@strongswan.org>
Acked-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NMartin Willi <martin@strongswan.org>
Acked-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This AEAD uses a chacha20 ablkcipher and a poly1305 ahash to construct the
ChaCha20-Poly1305 AEAD as defined in RFC7539. It supports both synchronous and
asynchronous operations, even if we currently have no async chacha20 or poly1305
drivers.
Signed-off-by: NMartin Willi <martin@strongswan.org>
Acked-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NMartin Willi <martin@strongswan.org>
Acked-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Poly1305 is a fast message authenticator designed by Daniel J. Bernstein.
It is further defined in RFC7539 as a building block for the ChaCha20-Poly1305
AEAD for use in IETF protocols.

This is a portable C implementation of the algorithm without architecture
specific optimizations, based on public domain code by Daniel J. Bernstein and
Andrew Moon.
Signed-off-by: NMartin Willi <martin@strongswan.org>
Acked-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

We explicitly set the Initial block Counter by prepending it to the nonce in
Little Endian. The same test vector is used for both encryption and decryption,
ChaCha20 is a cipher XORing a keystream.
Signed-off-by: NMartin Willi <martin@strongswan.org>
Acked-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

ChaCha20 is a high speed 256-bit key size stream cipher algorithm designed by
Daniel J. Bernstein. It is further specified in RFC7539 for use in IETF
protocols as a building block for the ChaCha20-Poly1305 AEAD.

This is a portable C implementation without any architecture specific
optimizations. It uses a 16-byte IV, which includes the 12-byte ChaCha20 nonce
prepended by the initial block counter. Some algorithms require an explicit
counter value, for example the mentioned AEAD construction.
Signed-off-by: NMartin Willi <martin@strongswan.org>
Acked-by: NSteffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Scatter gather lists can be created with more available entries than are
actually used (e.g. using sg_init_table() to reserve a specific number
of sg entries, but in actuality using something less than that based on
the data length).  The caller sometimes fails to mark the last entry
with sg_mark_end().  In these cases, sg_nents() will return the original
size of the sg list as opposed to the actual number of sg entries that
contain valid data.

On arm64, if the sg_nents() value is used in a call to dma_map_sg() in
this situation, then it causes a BUG_ON in lib/swiotlb.c because an
"empty" sg list entry results in dma_capable() returning false and
swiotlb trying to create a bounce buffer of size 0. This occurred in
the userspace crypto interface before being fixed by

0f477b65 ("crypto: algif - Mark sgl end at the end of data")

Protect against this by using the new sg_nents_for_len() function which
returns only the number of sg entries required to meet the desired
length and supplying that value to dma_map_sg().
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When performing a dma_map_sg() call, the number of sg entries to map is
required. Using sg_nents to retrieve the number of sg entries will
return the total number of entries in the sg list up to the entry marked
as the end. If there happen to be unused entries in the list, these will
still be counted. Some dma_map_sg() implementations will not handle the
unused entries correctly (lib/swiotlb.c) and execute a BUG_ON.

The sg_nents_for_len() function will traverse the sg list and return the
number of entries required to satisfy the supplied length argument. This
can then be supplied to the dma_map_sg() call to successfully map the
sg.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

On architectures where flush_dcache_page is not needed, we will
end up generating all the code up to the PageSlab call.  This is
because PageSlab operates on a volatile pointer and thus cannot
be optimised away.

This patch works around this by checking whether flush_dcache_page
is needed before we call PageSlab which then allows PageSlab to be
compiled awy.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts the low-level __gcm-aes-aesni algorithm to
the new AEAD interface.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Change the nx-842 common driver to wait for loading of both platform
drivers, and fail loading if the platform driver pointer is not set.
Add an independent platform driver pointer, that the platform drivers
set if they find they are able to load (i.e. if they find their platform
devicetree node(s)).

The problem is currently, the main nx-842 driver will stay loaded even
if there is no platform driver and thus no possible way it can do any
compression or decompression.  This allows the crypto 842-nx driver
to load even if it won't actually work.  For crypto compression users
(e.g. zswap) that expect an available crypto compression driver to
actually work, this is bad.  This patch fixes that, so the 842-nx crypto
compression driver won't load if it doesn't have the driver and hardware
available to perform the compression.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts cryptd to the new AEAD interface.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts rfc4106-gcm-aesni to the new AEAD interface.
The low-level interface remains as is for now because we can't
touch it until cryptd itself is upgraded.

In the conversion I've also removed the duplicate copy of the
context in the top-level algorithm.  Now all processing is carried
out in the low-level __driver-gcm-aes-aesni algorithm.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds setkey and setauthsize for cryptd AEAD.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts pcrypt over to the new AEAD interface.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch adds the helpers that allow the registration and removal
of multiple algorithms.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

No new code should be using the return value of crypto_unregister_alg
as it will become void soon.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch ensures that the tfm context always has enough extra
memory to ensure that it is aligned according to cra_alignment.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Now that type-safe init/exit functions exist, they often need
to access the underlying aead_instance.  So this patch adds the
helper aead_alg_instance to access aead_instance from a crypto_aead
object.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

As it stands the only non-type safe functions left in the new
AEAD interface are the cra_init/cra_exit functions.  It means
exposing the ugly __crypto_aead_cast to every AEAD implementor.

This patch adds type-safe init/exit functions to AEAD.  Existing
algorithms are unaffected while new implementations can simply
fill in these two instead of cra_init/cra_exit.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The patch updates the DocBook to cover the new AEAD interface
implementation.
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This reverts commit f858c7bc as
the algif_aead interface has been switched over to the new AEAD
interface.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The patch removes the use of timekeeping_valid_for_hres which is now
marked as internal for the time keeping subsystem. The jitterentropy
does not really require this verification as a coarse timer (when
random_get_entropy is absent) is discovered by the initialization test
of jent_entropy_init, which would cause the jitter rng to not load in
that case.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Signed-off-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch makes use of the new AEAD interface which uses a single
SG list instead of separate lists for the AD and plain text.

Note that the user-space interface now requires both input and
output to be of the same length, and both must include space for
the AD as well as the authentication tag.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch makes use of the new AEAD interface which uses a single
SG list instead of separate lists for the AD and plain text.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch makes use of the new AEAD interface which uses a single
SG list instead of separate lists for the AD and plain text.
Tested-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch makes use of the new AEAD interface which uses a single
SG list instead of separate lists for the AD and plain text.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch makes use of the new AEAD interface which uses a single
SG list instead of separate lists for the AD and plain text.  The
IV generation is also now carried out through normal AEAD methods.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch makes use of the new AEAD interface which uses a single
SG list instead of separate lists for the AD and plain text.  The
IV generation is also now carried out through normal AEAD methods.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>