Words cannot describe the embarrassment at creating a new gfp_t relaim to
only prevent the oomkiller but allow direct|kswapd reclaim, and then not
use it in the shmem_read_mapping_page_gfp().

Fixes: 24f8e00a ("drm/i915: Prefer to report ENOMEM rather than incur the oom for gfx allocations")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322223447.7493-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Use intel_wm_plane_visible() to determine cursor visibility for SKL+
also. Previously SKL+ would check the actual visibility which now
conflicts with the assumptions in intel_legacy_cursor_update().

We also change SKL+ to compute the cursor watermarks based on the
unclipped cursor size, just as we do on all the other platforms.
Using the clipped size could now result in garbage results.

Testcase: igt/kms_chv_cursor_fail
Fixes: a5509abd ("drm/i915: Fix legacy cursor vs. watermarks for ILK-BDW")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100195Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170314151050.12194-2-ville.syrjala@linux.intel.comTested-by: NDorota Czaplejewicz <dorota.czaplejewicz@collabora.co.uk>
Tested-by: NJari Tahvanainen <jari.tahvanainen@intel.com>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: NAnder Conselvan de Oliveira <conselvan2@gmail.com>

All platforms that lack double buffered watermarks will need to
handle the legacy cursor updates in the same way. So let's extract the
logic to determine the plane visibility into a small helper. For
simplicity we'll make the function DTRT for any plane, but only apply
the special sauce for cursor planes.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170314151050.12194-1-ville.syrjala@linux.intel.comTested-by: NDorota Czaplejewicz <dorota.czaplejewicz@collabora.co.uk>
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Since gfx allocations tend to be large, unmovable and disposable, report
the allocation failure back to userspace as an ENOMEM rather than incur
the oomkiller. We have already tried to make room by purging our own
cached gfx objects, and the oomkiller doesn't attribute ownership of gfx
objects so will likely pick the wrong candidate. Instead, let userspace
see the ENOMEM.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322110521.29930-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Because {hsw,skl,bxt}_ddi_pll_select all pretty much do the same thing
in slightly different ways. Replace everything with a simple copy of
the function and inline it inside intle_ddi_pll_select().

v2: s/return pll/return pll != NULL/ (Ville)
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490209125-20046-1-git-send-email-paulo.r.zanoni@intel.com

According to BSpec, "The CD clock frequency must be at least twice the
frequency of the Azalia BCLK." and BCLK is configured to 96 MHz by
default. This check is needed because BXT and GLK support cdclk
frequencies less than 192 MHz.

v2: Include other Gen9 platforms too for completeness.(Paulo)

Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489531556-2926-1-git-send-email-dhinakaran.pandiyan@intel.com

Implement the DP-Audio cdclk restriction for GLK, similar to what is
implemented for BDW and other GEN9 platforms. The max. pixel clock
adjustment for GLK, however factors in the 2 pixels per clock output that
GLK generates.

Separating min. cdclk and max. pixel_rate would be nicer, but let's
defer that to future and fix the GLK bug for now.
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: NPaulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1488931972-2865-1-git-send-email-dhinakaran.pandiyan@intel.com

The tasklets callbacks are only called from tasklet context so
it is safe do to this.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321105511.18269-1-tvrtko.ursulin@linux.intel.com

Storing the position of the breadcrumb of the last retired request as
a separate last_retired_head is superfluous as we always copy that into
head prior to recalculation of the intel_ring.space.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321102552.24357-1-chris@chris-wilson.co.uk

Rather than impose the cost of a locked test before queuing a new
request, reduce it to a simple test_bit() with a following clear_bit()
prior to doing the CSB check. This ensure that if an interrupt does
occur whilst reading from the CSB, we still detect it (the interrupt
would trigger a rescheduling of the tasklet anyway).
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321113320.2603-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

We get a warning with gcc-7 about a pointless comparison when
using a linear memmap:

drivers/gpu/drm/i915/selftests/scatterlist.c: In function 'alloc_table':
drivers/gpu/drm/i915/selftests/scatterlist.c:219:66: error: self-comparison always evaluates to false [-Werror=tautological-compare]

Splitting out the comparison into a separate function avoids the warning
and makes it slightly more obvious what happens.

Fixes: 935a2f77 ("drm/i915: Add some selftests for sg_table manipulation")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320094335.1266306-2-arnd@arndb.deReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

As intel_engine_init_global_seqno() may be called by
nop_submit_request() from inside irq context, we have to use atomic
versions of kmap/kunmap. This is rare as this requires using gen8 legacy
ringbuffer submission.
Reported-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320145609.4898-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

intel_engine_wakeup() is called by nop_request_submit() which is
installed to handle third party fences completed from within irq
context. As such, it needs the full irqsave/irqrestore and not the
partial spin_irq_lock handling.

[18942.714467] =================================
[18942.719076] [ INFO: inconsistent lock state ]
[18942.723522] 4.11.0-rc2-CI-CI_DRM_2368+ #1 Tainted: G     U  W
[18942.729970] ---------------------------------
[18942.734466] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage.
[18942.740594] gem_eio/1275 [HC0[0]:SC0[0]:HE1:SE1] takes:
[18942.745932]  (&(&fence->lock)->rlock){+.?...}, at: [<ffffffff815ec100>] dma_fence_signal+0x100/0x
230
[18942.755331] {IN-SOFTIRQ-W} state was registered at:
[18942.760356]   __lock_acquire+0x5d0/0x1bb0
[18942.764444]   lock_acquire+0xc9/0x220
[18942.768196]   _raw_spin_lock_irqsave+0x41/0x60
[18942.772747]   dma_fence_signal+0x100/0x230
[18942.776927]   vgem_fence_timeout+0x9/0x10 [vgem]
[18942.781701]   call_timer_fn+0x92/0x380
[18942.785557]   expire_timers+0x150/0x1f0
[18942.789491]   run_timer_softirq+0x7c/0x160
[18942.793705]   __do_softirq+0x116/0x4c0
[18942.797560]   irq_exit+0xa9/0xc0
[18942.800873]   smp_apic_timer_interrupt+0x38/0x50
[18942.805611]   apic_timer_interrupt+0x90/0xa0
[18942.810008]   cpuidle_enter_state+0x135/0x380
[18942.814503]   cpuidle_enter+0x12/0x20
[18942.818250]   call_cpuidle+0x1e/0x40
[18942.821906]   do_idle+0x17e/0x1f0
[18942.825333]   cpu_startup_entry+0x18/0x20
[18942.829463]   rest_init+0x127/0x130
[18942.833025]   start_kernel+0x3f1/0x3fe
[18942.836908]   x86_64_start_reservations+0x2a/0x2c
[18942.841733]   x86_64_start_kernel+0x173/0x186
[18942.846234]   verify_cpu+0x0/0xfc
[18942.849604] irq event stamp: 30568
[18942.853140] hardirqs last  enabled at (30567): [<ffffffff8110b81f>] ktime_get+0xef/0x120
[18942.861468] hardirqs last disabled at (30568): [<ffffffff81876377>] _raw_spin_lock_irqsave+0x17/0
x60
[18942.870812] softirqs last  enabled at (30462): [<ffffffff81085cd9>] __do_softirq+0x1d9/0x4c0
[18942.879443] softirqs last disabled at (30439): [<ffffffff81086139>] irq_exit+0xa9/0xc0
[18942.887616]
[18942.887616] other info that might help us debug this:
[18942.894279]  Possible unsafe locking scenario:
[18942.894279]
[18942.900336]        CPU0
[18942.902851]        ----
[18942.905362]   lock(&(&fence->lock)->rlock);
[18942.909647]   <Interrupt>
[18942.912330]     lock(&(&fence->lock)->rlock);
[18942.916821]
[18942.916821]  *** DEADLOCK ***
[18942.916821]
[18942.922862] 1 lock held by gem_eio/1275:
[18942.926859]  #0:  (&(&fence->lock)->rlock){+.?...}, at: [<ffffffff815ec100>] dma_fence_signal+0x1
00/0x230
[18942.936651]
[18942.936651] stack backtrace:
[18942.941142] CPU: 3 PID: 1275 Comm: gem_eio Tainted: G     U  W       4.11.0-rc2-CI-CI_DRM_2368+ #
1
[18942.950367] Hardware name: Gigabyte Technology Co., Ltd. Z170X-UD5/Z170X-UD5-CF, BIOS F21 01/06/2
017
[18942.959756] Call Trace:
[18942.962244]  dump_stack+0x67/0x92
[18942.965626]  print_usage_bug.part.23+0x259/0x268
[18942.970362]  mark_lock+0x12c/0x6f0
[18942.973851]  ? check_usage_forwards+0x130/0x130
[18942.978487]  mark_held_locks+0x6f/0xa0
[18942.982329]  ? _raw_spin_unlock_irq+0x27/0x50
[18942.986797]  trace_hardirqs_on_caller+0x150/0x200
[18942.991599]  trace_hardirqs_on+0xd/0x10
[18942.995515]  _raw_spin_unlock_irq+0x27/0x50
[18942.999796]  intel_engine_wakeup+0x26/0x30 [i915]
[18943.004670]  intel_engine_init_global_seqno+0x131/0x1a0 [i915]
[18943.010745]  nop_submit_request+0x2e/0x40 [i915]
[18943.015476]  submit_notify+0x3f/0x5c [i915]
[18943.019763]  __i915_sw_fence_complete+0x176/0x220 [i915]
[18943.025234]  ? try_to_del_timer_sync+0x4d/0x60
[18943.029825]  i915_sw_fence_complete+0x25/0x40 [i915]
[18943.034887]  dma_i915_sw_fence_wake+0x26/0x60 [i915]
[18943.039959]  dma_fence_signal+0x146/0x230
[18943.044109]  vgem_fence_signal_ioctl+0x6c/0xc0 [vgem]
[18943.049275]  drm_ioctl+0x200/0x450
[18943.052758]  ? vgem_fence_attach_ioctl+0x270/0x270 [vgem]
[18943.058334]  do_vfs_ioctl+0x90/0x6e0
[18943.061991]  ? entry_SYSCALL_64_fastpath+0x5/0xb1
[18943.066843]  ? __this_cpu_preempt_check+0x13/0x20
[18943.071643]  ? trace_hardirqs_on_caller+0xe7/0x200
[18943.076532]  SyS_ioctl+0x3c/0x70
[18943.079842]  entry_SYSCALL_64_fastpath+0x1c/0xb1
[18943.084558] RIP: 0033:0x7f0dfcc14357
[18943.088240] RSP: 002b:00007ffeb4628da8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[18943.095996] RAX: ffffffffffffffda RBX: ffffffff8147eb93 RCX: 00007f0dfcc14357
[18943.103311] RDX: 00007ffeb4628de0 RSI: 0000000040086442 RDI: 0000000000000005
[18943.110574] RBP: ffffc9000176ff88 R08: 0000000000000004 R09: 0000000000000000
[18943.117845] R10: 0000000000000029 R11: 0000000000000246 R12: 0000000000000001
[18943.125168] R13: 0000000000000005 R14: 0000000040086442 R15: 0000000000000000
[18943.132520]  ? __this_cpu_preempt_check+0x13/0x20

Fixes: cdc3a453 ("drm/i915: No need to save/restore irq status in intel_engine_wakeup")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320143133.1507-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

It has to be called after the global seqno has been assigned.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 31de7350 ("drm/i915/scheduler: emulate a scheduler for guc")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320132556.29286-1-tvrtko.ursulin@linux.intel.com

This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
  This structure will be used to save and indicate if sink
  supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
  reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
  in scdc structure
- If SCDC is present, checks if sink is capable of generating
  SCDC read request, and marks it in scdc structure.

V2: Addressed review comments
  Thierry:
  - Fix typos in commit message and make abbreviation consistent
    across the commit message.
  - Change structure object name from hdmi_info -> hdmi
  - Fix typos and abbreviations in description of structure drm_hdmi_info
    end the description with a full stop.
  - Create a structure drm_scdc, and keep all information related to SCDC
    register set (supported, read request supported) etc in it.

  Ville:
  - Change rr -> read_request
  - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
    of HF-VSDB parsing can be kept in same function, in incremental
    patches.

V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Addressed review comments from Ville
  - Add clock rate calculations for 1/10 and 1/40 ratios
  - Remove leftovers from old patchset
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-5-git-send-email-shashank.sharma@intel.com

This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
  This structure will be used to save and indicate if sink
  supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
  reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
  in scdc structure
- If SCDC is present, checks if sink is capable of generating
  SCDC read request, and marks it in scdc structure.

V2: Addressed review comments
 Thierry:
 - Fix typos in commit message and make abbreviation consistent
   across the commit message.
 - Change structure object name from hdmi_info -> hdmi
 - Fix typos and abbreviations in description of structure drm_hdmi_info
   end the description with a full stop.
 - Create a structure drm_scdc, and keep all information related to SCDC
   register set (supported, read request supported) etc in it.

Ville:
 - Change rr -> read_request
 - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
   of HF-VSDB parsing can be kept in same function, in incremental
   patches.

V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Rebase.
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Reviewed-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-4-git-send-email-shashank.sharma@intel.com

This patch implements a small function that finds if a
given CEA db is hdmi-forum vendor specific data block
or not.

V2: Rebase.
V3: Added R-B from Jose.
V4: Rebase
V5: Rebase
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Reviewed-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-3-git-send-email-shashank.sharma@intel.com

SCDC is a mechanism defined in the HDMI 2.0 specification that allows
the source and sink devices to communicate.

This commit introduces helpers to access the SCDC and provides the
symbolic names for the various registers defined in the specification.

V2: Rebase.
V3: Added R-B from Jose.
V4: Rebase
V5: Addressed review comments from Ville
 - Handle the I2c return values in a better way (dp_dual_mode)
 - Make the macros for SCDC Major/Minor more readable, by adding
   a 'GET' in the macro names
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NShashank Sharma <shashank.sharma@intel.com>
Reviewed-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-2-git-send-email-shashank.sharma@intel.com

Vendor specific infoframe is mandatory for 4K2K resolution.
Without this, the HDMI protocol compliance fails.
Signed-off-by: NNickey Yang <nickey.yang@rock-chips.com>
Reviewed-by: NJose Abreu <joabreu@synopsys.com>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1490081777-2232-1-git-send-email-nickey.yang@rock-chips.com

"I2C Master Interface Extended Read Mode" implements a segment
pointer-based read operation using the Special Register configuration.

This patch fix https://patchwork.kernel.org/patch/7098101/ mentioned
"The current implementation does not support "I2C Master Interface
Extended Read Mode" to read data addressed by non-zero segment
pointer, this means that if EDID has more than 1 extension blocks,
EDID reading operation won't succeed"

With this patch, dw-hdmi can read EDID data with 1/2/4 blocks.
Signed-off-by: NNickey Yang <nickey.yang@rock-chips.com>
Reviewed-by: NDouglas Anderson <dianders@chromium.org>
Acked-by: NVladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1489978651-16647-1-git-send-email-nickey.yang@rock-chips.com

We now call those two functions even when they are not defined
or declared anywhere because DEBUG_FS is disabled:

drivers/gpu/drm/msm/msm_drv.c: In function 'msm_drm_uninit':
drivers/gpu/drm/msm/msm_drv.c:244:2: error: implicit declaration of function 'msm_perf_debugfs_cleanup';did you mean 'msm_framebuffer_cleanup'? [-Werror=implicit-function-declaration]
drivers/gpu/drm/msm/msm_drv.c:245:2: error: implicit declaration of function 'msm_rd_debugfs_cleanup';did you mean 'msm_framebuffer_cleanup'? [-Werror=implicit-function-declaration]

This adds empty stub implementations for that case.

Fixes: 85eac470 ("drm/msm: Remove msm_debugfs_cleanup()")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320093936.1255573-1-arnd@arndb.de

The trick of using an uncached mmio read to ensure that the GGTT writes
are flushed does not require us to do the forcewake dance, so avoid it
in the hope of reducing the frequency that we do keep the device forced
awake.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170318104257.694-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>

When switching back to execlists, we also now need to restore the
tasklet handler.
Reported-by: NOscar Mateo <oscar.mateo@intel.com>
Fixes: 31de7350 ("drm/i915/scheduler: emulate a scheduler for guc")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170318102859.24101-1-chris@chris-wilson.co.ukReviewed-by: NMichał Winiarski <michal.winiarski@intel.com>

In the same spirit of the fix for QXL in commit 86107838 ("drm: qxl:
Don't alloc fbdev if emulation is not supported"), prevent the Oops in
the unbind path of Bochs if fbdev emulation is disabled.

[  112.176009] Oops: 0002 [#1] SMP
[  112.176009] Modules linked in: bochs_drm
[  112.176009] CPU: 0 PID: 3002 Comm: bash Not tainted 4.11.0-rc1+ #111
[  112.176009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[  112.176009] task: ffff8800743bbac0 task.stack: ffffc90000b5c000
[  112.176009] RIP: 0010:mutex_lock+0x18/0x30
[  112.176009] RSP: 0018:ffffc90000b5fc78 EFLAGS: 00010246
[  112.176009] RAX: 0000000000000000 RBX: 0000000000000260 RCX: 0000000000000000
[  112.176009] RDX: ffff8800743bbac0 RSI: ffff8800787176e0 RDI: 0000000000000260
[  112.176009] RBP: ffffc90000b5fc80 R08: ffffffff00000000 R09: 00000000ffffffff
[  112.176009] R10: ffff88007b463650 R11: 0000000000000000 R12: 0000000000000260
[  112.176009] R13: ffff8800787176e0 R14: ffffffffa0003068 R15: 0000000000000060
[  112.176009] FS:  00007f20564c7b40(0000) GS:ffff88007ce00000(0000) knlGS:0000000000000000
[  112.176009] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  112.176009] CR2: 0000000000000260 CR3: 000000006b89c000 CR4: 00000000000006f0
[  112.176009] Call Trace:
[  112.176009]  drm_mode_object_unregister+0x1e/0x50
[  112.176009]  drm_framebuffer_unregister_private+0x15/0x20
[  112.176009]  bochs_fbdev_fini+0x57/0x70 [bochs_drm]
[  112.176009]  bochs_unload+0x16/0x50 [bochs_drm]
[  112.176009]  drm_dev_unregister+0x37/0xd0
[  112.176009]  drm_put_dev+0x31/0x60
[  112.176009]  bochs_pci_remove+0x10/0x20 [bochs_drm]
[  112.176009]  pci_device_remove+0x34/0xb0
[  112.176009]  device_release_driver_internal+0x150/0x200
[  112.176009]  device_release_driver+0xd/0x10
[  112.176009]  unbind_store+0x108/0x150
[  112.176009]  drv_attr_store+0x20/0x30
[  112.176009]  sysfs_kf_write+0x32/0x40
[  112.176009]  kernfs_fop_write+0x10b/0x190
[  112.176009]  __vfs_write+0x23/0x120
[  112.176009]  ? security_file_permission+0x36/0xb0
[  112.176009]  ? rw_verify_area+0x49/0xb0
[  112.176009]  vfs_write+0xb0/0x190
[  112.176009]  SyS_write+0x41/0xa0
[  112.176009]  entry_SYSCALL_64_fastpath+0x1a/0xa9
[  112.176009] RIP: 0033:0x7f2055bd5620
[  112.176009] RSP: 002b:00007ffed2f487d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  112.176009] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2055bd5620
[  112.176009] RDX: 000000000000000d RSI: 0000000000ee0008 RDI: 0000000000000001
[  112.176009] RBP: 0000000000000001 R08: 00007f2055e94760 R09: 00007f20564c7b40
[  112.176009] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000000
[  112.176009] R13: 00007ffed2f48d70 R14: 0000000000000000 R15: 0000000000000000
[  112.176009] Code: 00 00 00 55 be 02 00 00 00 48 89 e5 e8 62 fb ff ff 5d c3 55 48 89 e5 53 48 89 fb e8 53 e9 ff ff 65 48 8b 14 25 40 c4 00 00 31 c0 <f0> 48 0f b1 13 48 85 c0 74 08 48 89 df e8c6 ff ff ff 5b 5d c3
[  112.176009] RIP: mutex_lock+0x18/0x30 RSP: ffffc90000b5fc78
[  112.176009] CR2: 0000000000000260
[  112.205622] ---[ end trace 76189cd7a9bdd155 ]---
Signed-off-by: NGabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317181409.4183-1-krisman@collabora.co.ukSigned-off-by: NGerd Hoffmann <kraxel@redhat.com>

Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The pointer plane is always null on the error path at label 'fail'
hence the check if it is non-null is redundant. We can therefore
remove the check and the destruction of plane as well as the fail
error path and instead just return an -ENOMEM ERR_PTR.

Detected by CoverityScan, CID#1339532 ("Logically Dead Code")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316185418.32765-1-colin.king@canonical.com

Use platform_register_drivers instead of open coding the iteration over
component platform drivers in the vc4_drv module.
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: NEric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317170059.17821-1-p.zabel@pengutronix.de

Use pagecache_write to avoid shmemfs clearing the pages prior to us
immediately overwriting them with our data.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317194648.12468-2-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>

i915_gem_object_create_from_data() always returns an error pointer on
failure, there is no need to check against NULL.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317205317.7885-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>

Both object creation and backing storage page allocation do not require
struct_mutex, so do not require the caller to take it.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317194648.12468-1-chris@chris-wilson.co.ukReviewed-by: NMatthew Auld <matthew.auld@intel.com>

Since obj->active_count is only updated upon retirement, if we see an
active object in the batch pool, double check that is still active
before deciding to allocate a new object.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316132006.7976-3-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>

Do an early read of the execlists' queue before we take the spinlock and
start checking. This is safe as the first writer to the execlists queue
will cause the tasklet to be run again after a memory barrier.

v2: Keep guc in sync with execlists queue changes
v3: Explain the mb between the tasklet running on one cpu and the
execlist_first update and schedule from a second cpu.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: NTvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: NMichał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317120716.17191-1-chris@chris-wilson.co.uk

i915_gem_stolen_list_info() sneakily takes advantage of the
obj->obj_exec_link to save itself from having to allocate. Enough of the
subterfuge, just allocate an array of pointers and sort them instead of
the list.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316132006.7976-7-chris@chris-wilson.co.uk

Before rc6 is initialised (after driver load or resume), the value inside
VLV_COUNTER_CONTROL is undefined so we cannot make an assertion that is
in HIGH_RANGE mode.

Fixes: 6b7f6aa7 ("drm/i915: Use coarse grained residency counter with byt")
Testcase: igt/drv_suspend/debugfs-reader
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317125918.11351-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>

Geminilake also supports pooled EUs. Enable it.

It is unclear if the recommendation to disable it for 2x6 configurations
from commit e015dd69 ("drm/i915/bxt: Add WaEnablePooledEuFor2x6")
should also apply to GLK, but it is applied anyway to be on the safe
side. That restriction can be lifted later if determined not to impact
performance.

The extra restriction should not impact user space either. The only user
space that uses this feature is Beignet, and it only does so for 3x6
devices. See See Beignet's commit 6901899ec90a ("Runtime: set the sub
slice according to kernel pooled EU configure.").

v2: Improve commit message. (Mika, Roy)

Cc: Arun Siluvery <arun.siluvery@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Yang Rong <rong.r.yang@intel.com>
Signed-off-by: NAnder Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NMika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317140436.24645-1-ander.conselvan.de.oliveira@intel.com

The only time we need to emit a flush inside request emission is after
an execbuffer, for which we can use the full __i915_add_request(). All
other instances want the simpler i915_add_request() without flushing, so
remove the useless helper.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317114709.8388-1-chris@chris-wilson.co.uk

If we avoid initializing forcewake domains when running as
a guest, and also use gen2 mmio accessors in that case, we
can avoid the timer traffic and any looping through the
forcewake code which is currently just so it can end up in
the no-op forcewake implementation.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Weinan Li <weinan.z.li@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NTerrence Xu <terrence.xu@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170310095747.12258-1-tvrtko.ursulin@linux.intel.com
[tursulin: commit spelling fix]

From commit a6508ded ("drm/i915: Use page coloring to provide the guard
page at the end of the GTT"), we no longer explicitly subtract guard page
at end for GGTT address space init, so shouldn't subtract that for vGPU
balloon too, as that will leave that end page to be available for
vGPU. Change balloon to cover full range too.

This fixes to use recent drm-intel tip kernel for guest OS. Found by GVT-g
cmd parser that guest kernel uses end page as scratch then try to run
MI_STORE_REG_MEM onto it.

v2: remove old comments

Cc: Terrence Xu <terrence.xu@intel.com>
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170310022238.3191-1-zhenyuw@linux.intel.comReviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

trace_i915_gem_request_out may be used after the request is completed,
and so the request may have been retired on another thread, invalidating
the rq->ctx. Avoid dereferencing rq->ctx in the tracepoint by switching
to the fence context id instead, updating all tracepoints to match.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316204235.27786-1-chris@chris-wilson.co.ukReviewed-by: NTvrtko Ursulin <tvrtko.ursulin@intel.com>

The msgqueue pointer validity should be checked by its owner, not by the
msgqueue code itself to avoid this situation.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Reported-by: NJulia Lawall <julia.lawall@lip6.fr>
Signed-off-by: NDave Airlie <airlied@redhat.com>