Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 28 10月, 2012 1 次提交
  3. 25 10月, 2012 1 次提交
  5. 24 10月, 2012 1 次提交
  7. 16 10月, 2012 1 次提交
    • D
      perf tool: Precise mode requires exclude_guest · 1342798c
      由 David Ahern 提交于 
      Summary of events per Peter:

  "Intel PEBS in VT-x context uses the DS address as a guest linear address,
  even though its programmed by the host as a host linear address. This
  either results in guest memory corruption and or the hardware faulting and
  'crashing' the virtual machine.  Therefore we have to disable PEBS on VT-x
  enter and re-enable on VT-x exit, enforcing a strict exclude_guest.

  AMB IBS does work but doesn't currently support exclude_* at all,
  setting an exclude_* bit will make it fail."

This patch handles userspace perf command, setting the exclude_guest
attribute if precise mode is requested, but only if a user has not
specified a request for guest or host only profiling (G or H attribute).

Kernel side AMD currently ignores all exclude_* bits, so there is no impact
to existing IBS code paths. Robert Richter has a patch where IBS code will
return EINVAL if an exclude_* bit is set. When this goes in it means use
of :p on AMD with IBS will first fail with EINVAL (because exclude_guest
will be set). Then the existing fallback code within perf will unset
exclude_guest and try again. The second attempt will succeed if the CPU
supports IBS profiling.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: NRobert Richter <robert.richter@amd.com>
Tested-by: NRobert Richter <robert.richter@amd.com>
Reviewed-by: NRobert Richter <robert.richter@amd.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Robert Richter <robert.richter@amd.com>
Link: http://lkml.kernel.org/r/1347569955-54626-2-git-send-email-dsahern@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      1342798c
  9. 27 9月, 2012 1 次提交
  11. 18 9月, 2012 1 次提交
  13. 11 9月, 2012 1 次提交
    • I
      perf tools: Use __maybe_used for unused variables · 1d037ca1
      由 Irina Tirdea 提交于 
      perf defines both __used and __unused variables to use for marking
unused variables. The variable __used is defined to
__attribute__((__unused__)), which contradicts the kernel definition to
__attribute__((__used__)) for new gcc versions. On Android, __used is
also defined in system headers and this leads to warnings like: warning:
'__used__' attribute ignored

__unused is not defined in the kernel and is not a standard definition.
If __unused is included everywhere instead of __used, this leads to
conflicts with glibc headers, since glibc has a variables with this name
in its headers.

The best approach is to use __maybe_unused, the definition used in the
kernel for __attribute__((unused)). In this way there is only one
definition in perf sources (instead of 2 definitions that point to the
same thing: __used and __unused) and it works on both Linux and Android.
This patch simply replaces all instances of __used and __unused with
__maybe_unused.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com
[ committer note: fixed up conflict with a116e05d in builtin-sched.c ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      1d037ca1
  15. 07 9月, 2012 2 次提交
  17. 23 8月, 2012 1 次提交
  19. 15 8月, 2012 5 次提交
    • A
      perf evlist: Introduce evsel list accessors · 0c21f736
      由 Arnaldo Carvalho de Melo 提交于 
      To replace the longer list_entry constructs for things that are widely
used:

	perf_evlist__{first,last}(evlist)
	perf_evsel__next(evsel)
Acked-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NNamhyung Kim <namhyung@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ng7azq26wg1jd801qqpcozwp@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      0c21f736
    • A
      perf evlist: Rename __group method to __set_leader · 63dab225
      由 Arnaldo Carvalho de Melo 提交于 
      Just like was done for parse_events__set_leader.

Also we need to have the list_entry set_leader method in evlist.c so that we
don't grow another dep in the python binding:

 # ~acme/git/linux/tools/perf/python/twatch.py
 Traceback (most recent call last):
   File "/home/acme/git/linux/tools/perf/python/twatch.py", line 16, in <module>
     import perf
 ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: parse_events__set_leader

And also remove a pr_debug from evsel.c so that we avoid this one too:

 # ~acme/git/linux/tools/perf/python/twatch.py
 Traceback (most recent call last):
   File "/home/acme/git/linux/tools/perf/python/twatch.py", line 16, in <module>
     import perf
 ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: eprintf
Acked-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NNamhyung Kim <namhyung@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0hk9dazg9pora9jylkqngovm@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      63dab225
    • J
      perf tools: Enable grouping logic for parsed events · 6a4bb04c
      由 Jiri Olsa 提交于 
      This patch adds a functionality that allows to create event groups
based on the way they are specified on the command line. Adding
functionality to the '{}' group syntax introduced in earlier patch.

The current '--group/-g' option behaviour remains intact. If you
specify it for record/stat/top command, all the specified events
become members of a single group with the first event as a group
leader.

With the new '{}' group syntax you can create group like:
  # perf record -e '{cycles,faults}' ls

resulting in single event group containing 'cycles' and 'faults'
events, with cycles event as group leader.

All groups are created with regards to threads and cpus. Thus
recording an event group within a 2 threads on server with
4 CPUs will create 8 separate groups.

Examples (first event in brackets is group leader):

  # 1 group (cpu-clock,task-clock)
  perf record --group -e cpu-clock,task-clock ls
  perf record -e '{cpu-clock,task-clock}' ls

  # 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
  perf record -e '{cpu-clock,task-clock},{minor-faults,major-faults}' ls

  # 1 group (cpu-clock,task-clock,minor-faults,major-faults)
  perf record --group -e cpu-clock,task-clock -e minor-faults,major-faults ls
  perf record -e '{cpu-clock,task-clock,minor-faults,major-faults}' ls

  # 2 groups (cpu-clock,task-clock) (minor-faults,major-faults)
  perf record -e '{cpu-clock,task-clock} -e '{minor-faults,major-faults}' \
   -e instructions ls

  # 1 group
  # (cpu-clock,task-clock,minor-faults,major-faults,instructions)
  perf record --group -e cpu-clock,task-clock \
   -e minor-faults,major-faults -e instructions ls perf record -e
'{cpu-clock,task-clock,minor-faults,major-faults,instructions}' ls

It's possible to use standard event modifier for a group, which spans
over all events in the group and updates each event modifier settings,
for example:

  # perf record -r '{faults:k,cache-references}:p'

resulting in ':kp' modifier being used for 'faults' and ':p' modifier
being used for 'cache-references' event.
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-ho42u0wcr8mn1otkalqi13qp@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      6a4bb04c
    • J
      perf tools: Add support to update event modifier · f5b1135b
      由 Jiri Olsa 提交于 
      Adding support to update already defined event's attribute with
event modifier. This change will allow to use group modifier as
an update to the existing event modifiers.

Adding 'add' parameter to the parse_events__modifier_event function.
Calling it with 'add' = false/true, the event modifier is
initialized/updated respectively.

Added exclude_GH flag to evsel struct, because we need to remember
if one of 'GH' modifiers was used for event. The reason is that the
default settings for exclude_guest is 1 and during the group
modifier processing we have no other way of knowing if it was set
by default or by event modifier.

Keeping the current behaviour, that any event/group modifier reset
the defaults for exclude_host (0) and exclude_guest (1).
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-8peaey3e2qc9dwtkvzbi4wmx@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      f5b1135b
    • J
      perf tools: Add support to parse event group syntax · 89efb029
      由 Jiri Olsa 提交于 
      Adding scanner/parser bits to parse event groups.

The grammar for group is:
  groups:      groups ',' group | group
  group:       group_name '{' events '}' group_mod
  group_name:  name | empty
  group_mod:   ':' group_mods | empty
  group_mods:  event_mod

It's possible to use standard event modifier as a modifier
for group. It'll be used as an update to existing event
modifiers.

It's necessary to use quoting ("'\) when specifying group on
command line, since {} characters are interpreted by most of
the shells.

It is now possible to specify groups in event syntax like:

  '{cycles,faults}'
   - anonymous group

  'group1{cycles,faults}
   - group with name 'group1'

  '{cycles,faults}:k
   - anonymous group with event modifier 'k'

  '{cpu-clock,task-clock},{minor-faults,major-faults}'
   - two anonymous groups

The grouping functionality itself is coming shortly.
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/n/tip-p4j8bnvo879uokum4k4zk5q6@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      89efb029
  21. 10 8月, 2012 1 次提交
  23. 08 8月, 2012 1 次提交
  25. 25 7月, 2012 2 次提交
    • J
      perf tools: Make the breakpoint events sample period default to 1 · 4a841d65
      由 Jovi Zhang 提交于 
      There have one problem about hw_breakpoint perf event, as watched, the
events reported to userspace is not correctly, sometime one trigger
bp_event report several events, sometime bp_event cannot go through to
user.

The root cause is attr->freq is 1 passed to kernel defaultly in bp
events, this make kernel calculate event period not as expect, make
sample period to 1 will change attr->freq to 0, to fix this problem.

This patch is similar with commit f92128 about tracepoint events:
    perf: Make the trace events sample period default to 1
Signed-off-by: NJovi Zhang <bookjovi@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/CACV3sbLF8taiCq_VYW-sgRJyupeMzg58C7ZXfMe3xZUiH_Mx6w@mail.gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      4a841d65
    • F
      perf tools: Fix trace events storms due to weight demux · 0983cc0d
      由 Frederic Weisbecker 提交于 
      Trace events have a period (weight) of 1 by default. This can be
overriden on events definition by using the __perf_count() macro.

For example, the sched_stat_runtime() is weighted with the runtime of
the task that fired the event.

By default, perf handles such weighted event by dividing it into
individual events carrying a weight of 1. For example if
sched_stat_runtime is fired and the task has run 5000000 nsecs, perf
divides it into 5000000 events in the buffer.

This behaviour makes weighted events unusable because they quickly
fullfill the buffers and we lose most events.

The commit 5d81e5cf ("events: Don't
divide events if it has field period") solves this problem by sending
only one event when PERF_SAMPLE_PERIOD flag is set. The weight is
carried in the sample itself such that we don't need to demultiplex it
anymore.

This patch provides the last missing piece to use this feature by
setting PERF_SAMPLE_PERIOD from perf tools when we deal with trace
events.

Before:
	$ ./perf record -e sched:* -a sleep 1
	[ perf record: Woken up 3 times to write data ]
	[ perf record: Captured and wrote 1.619 MB perf.data (~70749 samples) ]
	Warning:
	Processed 16909 events and lost 1 chunks!

	Check IO/CPU overload!

	$ ./perf script
	perf  1894 [003]   824.898327: sched_migrate_task: comm=perf pid=1898 prio=120 orig_cpu=2 dest_cpu=0
	perf  1894 [003]   824.898335: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
	perf  1894 [003]   824.898336: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
	perf  1894 [003]   824.898337: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
	perf  1894 [003]   824.898338: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
	perf  1894 [003]   824.898339: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
	perf  1894 [003]   824.898340: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
	perf  1894 [003]   824.898341: sched_stat_sleep: comm=perf pid=1898 delay=113179500 [ns]
	[...]

After:
	$ ./perf record -e sched:* -a sleep 1
	[ perf record: Woken up 1 times to write data ]
	[ perf record: Captured and wrote 0.074 MB perf.data (~3228 samples) ]

	$ ./perf script

	perf  1461 [000]   554.286957: sched_migrate_task: comm=perf pid=1465 prio=120 orig_cpu=3 dest_cpu=1
	perf  1461 [000]   554.286964: sched_stat_sleep: comm=perf pid=1465 delay=133047190 [ns]
	perf  1461 [000]   554.286967: sched_wakeup: comm=perf pid=1465 prio=120 success=1 target_cpu=001
	swapper     0 [001]   554.286976: sched_stat_wait: comm=perf pid=1465 delay=0 [ns]
	swapper     0 [001]   554.286983: sched_switch: prev_comm=swapper/1 prev_pid=0 prev_prio=120 prev_state=R ==> next_comm=perf
	[...]
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1342631456-7233-1-git-send-email-fweisbec@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      0983cc0d
  27. 05 7月, 2012 1 次提交
  29. 30 6月, 2012 2 次提交
  31. 20 6月, 2012 5 次提交
  33. 18 6月, 2012 4 次提交
  35. 26 5月, 2012 1 次提交
    • A
      perf tools: Reconstruct event with modifiers from perf_event_attr · c410431c
      由 Arnaldo Carvalho de Melo 提交于 
      The modifiers:

  k		kernel space
  u		user space
  h		hypervisor
  G		guest
  H		host
  p, pp, ppp    precision level (PEBS)

that can be suffixed to an event were lost when tools used event_name()
to reconstruct them from the perf_event_attr entries in a perf.data
file.

Fix it by following the defaults used for these modifiers in the current
codebase, so:

 $ perf record -e instructions:u usleep 1 2> /dev/null
 $ perf evlist
 instructions:u
 $ perf record -e cycles:k usleep 1 2> /dev/null
 $ perf evlist
 cycles:k
 $ perf record -e cycles:kh usleep 1 2> /dev/null
 $ perf evlist
 cycles:kh
 $ perf record -e cache-misses:G usleep 1 2> /dev/null
 $ perf evlist
 cache-misses:G
 $ perf record -e cycles:ppk usleep 1 2> /dev/null
 $ perf evlist
 cycles:kpp
 $

Also works with 'top', 'report', etc.

More work needed to cover tracepoints and software events while not
dragging lots of baggage to the python binding, this is a minimal fix
for v3.5.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-4hl5glle0hxlklw4usva1mkt@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      c410431c
  37. 22 5月, 2012 4 次提交
  39. 18 5月, 2012 1 次提交
  41. 23 3月, 2012 2 次提交
  43. 17 3月, 2012 1 次提交