- 23 9月, 2009 9 次提交
-
-
由 Heiko Carstens 提交于
Removes a couple of simple code duplications. But before I have to do this again, just simplify it. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Christian Borntraeger 提交于
arch_ptrace on s390 implements PTRACE_(PEEK|POKE)(TEXT|DATA) instead of using using ptrace_request in kernel/ptrace.c. The only reason is the 31bit addressing mode, where we have to unmask the highest bit. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
The disabled_wait inline assmembly also clobbers register r1, but it is missing in the clobber list. Fixes recursive Oops on panic. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Make the inline assembly look like all others. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Force system into defined state after resume. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
On resume the system that loads the to be resumed image might have unstable pages. When the resume image is copied back and a write access happen to an unstable page this causes an exception and the system crashes. To fix this set all free pages to stable before copying the resumed image data. Also after everything has been restored set all free pages of the resumed system to unstable again. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
These functions aren't needed. Might be a leftover of the pre cond_syscall time. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Use function parameters instead of accessing the pt_regs structure to get the parameters. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Use function parameters instead of accessing the pt_regs structure to get the parameters. Also merge the 31 and 64 bit versions since they are identical. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 21 9月, 2009 15 次提交
-
-
由 Ingo Molnar 提交于
- provide compatibility Kconfig entry for existing PERF_COUNTERS .config's - provide courtesy copy of old perf_counter.h, for user-space projects - small indentation fixups - fix up MAINTAINERS - fix small x86 printout fallout - fix up small PowerPC comment fallout (use 'counter' as in register) Reviewed-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: NStephane Eranian <eranian@google.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NPaul Mackerras <paulus@samba.org> Reviewed-by: NArjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Ingo Molnar 提交于
In preparation to the renames, to avoid a namespace clash. Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <new-submission> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Paul Mackerras 提交于
Commit 5622f295 ("x86, perf_counter, bts: Optimize BTS overflow handling") removed the regs field from struct perf_sample_data and added a regs parameter to perf_counter_overflow(). This breaks the build on powerpc (and Sparc) as reported by Sachin Sant: arch/powerpc/kernel/perf_counter.c: In function 'record_and_restart': arch/powerpc/kernel/perf_counter.c:1165: error: unknown field 'regs' specified in initializer This adjusts arch/powerpc/kernel/perf_counter.c to correspond with the new struct perf_sample_data and perf_counter_overflow(). [ v2: also fix Sparc, Markus Metzger <markus.t.metzger@intel.com> ] Reported-by: NSachin Sant <sachinp@in.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org> Cc: Markus Metzger <markus.t.metzger@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: benh@kernel.crashing.org Cc: linuxppc-dev@ozlabs.org Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <19127.8400.376239.586120@drongo.ozlabs.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Linus Torvalds 提交于
Ingo points out that I screwed up when merging the 'timers-for-linus' branch in commit a03fdb76. A bit too much copy-and-pasting caused the end result to have an extraneous 'return' in the middle of an expression. That was obviously bogus. Blush. Reported-by-with-patch: Ingo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alok Kataria 提交于
On an AMD-64 system the processor frequency that is printed during system boot, may be different than the tsc frequency that was returned by the hypervisor, due to the value returned from calibrate_cpu. For debugging timekeeping or other related issues it might be better to get the tsc_khz value returned by the hypervisor. The patch below now prints the tsc frequency that the VMware hypervisor returned. Signed-off-by: NAlok N Kataria <akataria@vmware.com> LKML-Reference: <1252095219.12518.13.camel@ank32.eng.vmware.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
While these don't get actively used (afaict), it still doesn't hurt for them to properly reflect what how respective segments will get mapped/ accessed. Signed-off-by: NJan Beulich <jbeulich@novell.com> LKML-Reference: <4AA0E95F0200007800013707@vpn.id2.novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
Add missing annotations, and make use of include/linux/init.h's macros. Signed-off-by: NJan Beulich <jbeulich@novell.com> LKML-Reference: <4AA0E8F60200007800013703@vpn.id2.novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Jan Beulich 提交于
On one of my systems, several thousand iterations are needed before CMD_RESET can be observed clear after setting it. Using a much higher value here obviously cannot hurt. Signed-off-by: NJan Beulich <jbeulich@novell.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> LKML-Reference: <4AA0E85D02000078000136F9@vpn.id2.novell.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Sergey Senozhatsky 提交于
Trivial: correct "that the we don't" typo. Signed-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> LKML-Reference: <20090917125401.GU3717@localdomain.by> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Felipe Contreras 提交于
Signed-off-by: NFelipe Contreras <felipe.contreras@gmail.com> Cc: Vegard Nossum <vegardno@ifi.uio.no> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Alok N Kataria <akataria@vmware.com> Cc: "Tan Wei Chong" <wei.chong.tan@intel.com> Cc: Len Brown <len.brown@intel.com> Cc: Lin Ming <ming.m.lin@intel.com> Cc: Bob Moore <robert.moore@intel.com> LKML-Reference: <1253137123-18047-2-git-send-email-felipe.contreras@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Cyrill Gorcunov 提交于
In case of discrete (pretty old) apics we may have cpu_has_apic bit not set but have to check if smp_found_config (MP spec) is there and apic was not disabled. Also don't forget to print apic/io-apic for such case as well. Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Cc: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <20090915071230.GA10604@lenovo> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Huang Weiyi 提交于
Remove duplicated #include in: arch/x86/kernel/cpu/common.c Signed-off-by: NHuang Weiyi <weiyi.huang@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Joe Perches 提交于
Perhaps this is a more readable/standard form. Signed-off-by: NJoe Perches <joe@perches.com> LKML-Reference: <1252945687.3937.14.camel@Joe-Laptop.home> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Peter Zijlstra 提交于
Dave noticed that we leak the PMU resource reservations when we fail the hardware counter init. Reported-by: NDavid Miller <davem@davemloft.net> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: NDavid Miller <davem@davemloft.net> LKML-Reference: <1252483487.7746.164.camel@twins> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 20 9月, 2009 10 次提交
-
-
由 Jaswinder Singh Rajput 提交于
fix the following 'make includecheck' warning: arch/x86/kernel/cpu/common.c: linux/smp.h is included more than once. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1252087783.6385.10.camel@ht.satnam>
-
由 Jaswinder Singh Rajput 提交于
fix the following 'make includecheck' warning: arch/x86/mm/kmemcheck/shadow.c: linux/module.h is included more than once. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1247065179.4382.51.camel@ht.satnam>
-
由 Jaswinder Singh Rajput 提交于
fix the following 'make includecheck' warning: arch/x86/kernel/traps.c: asm/traps.h is included more than once. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1247065094.4382.49.camel@ht.satnam>
-
由 Jaswinder Singh Rajput 提交于
fix the following 'make includecheck' warning: arch/um/os-Linux/helper.c: linux/limits.h is included more than once. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: jdike@addtoit.com Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1247064950.4382.45.camel@ht.satnam> Acked-by: NWANG Cong <xiyou.wangcong@gmail.com>
-
由 Jaswinder Singh Rajput 提交于
fix the following 'make includecheck' warning: arch/s390/kernel/sys_s390.c: linux/syscalls.h is included more than once. Signed-off-by: NJaswinder Singh Rajput <jaswinderrajput@gmail.com> Cc: schwidefsky@de.ibm.com Cc: heiko.carstens@de.ibm.com Cc: Sam Ravnborg <sam@ravnborg.org> LKML-Reference: <1247068809.4382.111.camel@ht.satnam>
-
由 Alan Cox 提交于
We moved this into uart_state, now move the fields out of the separate structure and kill it off. Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Kay Sievers 提交于
This allows subsytems to provide devtmpfs with non-default permissions for the device node. Instead of the default mode of 0600, null, zero, random, urandom, full, tty, ptmx now have a mode of 0666, which allows non-privileged processes to access standard device nodes in case no other userspace process applies the expected permissions. This also fixes a wrong assignment in pktcdvd and a checkpatch.pl complain. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Yinghai Lu 提交于
After close looking, commit 8126dec3 will break: 1. some cpu feature in early stage too, like cpu_has_x2apic 2. will break built-in-command line 3. will break other memmap= and mem= 4. early_dbgp and early_console that will use early_ioremap to access mmio (?) So revert it. Reported-by: Hugh Dickins <hugh.dickins@tiscali.co.uk>, Cc: Linus Torvalds <torvalds@linux-foundation.org>, Cc: Andrew Morton <akpm@linux-foundation.org>, LKML-Reference: <4AB51DFD.2000904@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Andreas Herrmann 提交于
Fix following compile warning: arch/x86/kernel/cpu/mcheck/mce_amd.c: In function 'threshold_create_bank': arch/x86/kernel/cpu/mcheck/mce_amd.c:492: warning: unused variable 'c' which shows up when kernel is compiled with CONFIG_SMP=n. Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com> LKML-Reference: <20090915151727.GB21670@alberich.amd.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Arjan van de Ven 提交于
The "end of a C state" trace point currently happens before the code runs that corrects the TSC for having stopped during idle. The result of this is that the timestamp of the end-of-C-state event is garbage on cpus where the TSC stops during idle. This patch moves the end point of the C state to after the timekeeping engine of the kernel has been corrected. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Cc: Len Brown <len.brown@intel.com> Cc: fweisbec@gmail.com Cc: peterz@infradead.org Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <20090919133533.139c2a46@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 19 9月, 2009 6 次提交
-
-
由 Arjan van de Ven 提交于
This patch converts the existing power tracer into an event tracer, so that power events (C states and frequency changes) can be tracked via "perf". This also removes the perl script that was used to demo the tracer; its functionality is being replaced entirely with timechart. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20090912130542.6d314860@infradead.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Suresh Siddha 提交于
On Intel platforms, we can use logical flat mode if there are <= 8 logical cpu's (irrespective of physical apic id values). This will enable simplified and efficient IPI and device interrupt routing on such platforms. Fix the relevant comments while we are at it. We can clean up default_setup_apic_routing() by using apic->probe() but that is a different item. Signed-off-by: NSuresh Siddha <suresh.b.siddha@intel.com> Cc: "yinghai@kernel.org" <yinghai@kernel.org> LKML-Reference: <1253327399.3948.747.camel@sbs-t61.sc.intel.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Guennadi Liakhovetski 提交于
We will be registering and unregistering the soc_camera_platform platform device multiple times, therefore we need a .release() method and have to nullify the kobj. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
Update ap325rxa to specify .bus_id in struct soc_camera_link explicitly, remove unused .iface from struct soc_camera_platform_info. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
Add a struct device pointer to struct soc_camera_platform_info and let the user (ap325rxa) pass it down to soc_camera_platform.c in its .add_device() method. Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Guennadi Liakhovetski 提交于
soc_camera_platform.c is only used by y SuperH ap325rxa board. This patch converts soc_camera_platform.c and its users for the soc-camera platform- device conversion and also extends soc-camera core to handle non-I2C cameras. Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-