It's overkill to have a flag parameter which is essentially used just
as a boolean. This takes care of core + adjusting drivers.

Adjusting the scanout position callback is a bit harder, since radeon
also supplies it's own driver-private flags in there.

v2: Fixup misplaced hunks (Neil).

v3: kbuild says v1 was better ...

Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-2-daniel.vetter@ffwll.ch

There's really no reason for anything more:
- Calling this while the crtc vblank stuff isn't set up is a driver
  bug. Those places alrready DRM_ERROR.
- Calling this when the crtc is off is either a driver bug (calling
  drm_crtc_handle_vblank at the wrong time) or a core bug (for
  anything else). Again, we DRM_ERROR.
- EINVAL is checked at higher levels already, and if we'd use struct
  drm_crtc * instead of (dev, pipe) it would be real obvious that
  those are again core bugs.

The only valid failure mode is crap hardware that couldn't sample a
useful timestamp, to ask the core to just grab a not-so-accurate
timestamp. Bool is perfectly fine for that.

v2: Also fix up the one caller, I lost that in the shuffling (Jani).

v3: Fixup commit message (Neil).

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Acked-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-1-daniel.vetter@ffwll.ch

So far we only allowed for 1 retry and just failed the query
- and thereby high precision vblank timestamping - if we did
not get a reasonable result, as such a failure wasn't considered
all too horrible. There are a few NVidia gpu models out there which
may need a bit more than 1 retry to get a successful query result
under some conditions.

Since Linux 4.4 the update code for vblank counter and timestamp
in drm_update_vblank_count() changed so that the implementation
assumes that high precision vblank timestamping of a kms driver
either consistently succeeds or consistently fails for a given
video mode and encoder/connector combo. Iow. switching from success
to fail or vice versa on a modeset or connector change is ok, but
spurious temporary failure for a given setup can confuse the core
code and potentially cause bad miscounting of vblanks and confusion
or hangs in userspace clients which rely on vblank  stuff, e.g.,
desktop compositors.

Therefore change the max retry count to a larger number - more than
any gpu so far is known to need to succeed, but still low enough
so that these queries which do also happen in vblank interrupt are
still fast enough to be not disastrously long if something would
go badly wrong with them.

As such sporadic retries only happen seldom even on affected gpu's,
this could mean a vblank irq could take a few dozen microseconds
longer every few hours of uptime -- better than a desktop compositor
randomly hanging every couple of hours or days of uptime in a hard
to reproduce manner.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Again just going through the motions, no functional changes in here.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>t
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-12-daniel.vetter@ffwll.ch

The trouble here is that it does multiple atomic commits under one
drm_modeset_lock_all, which breaks the behind-the-scenes acquire
context magic that function pulls off. It's much better to have one
overall atomic commit. That we still have multiple atomic commits
prevents us from adding some pretty useful debug checks to the atomic
machinery.

Hence it is really a bad idea to call the legacy
drm_crtc_force_disable_all() function. There's 2 atomic drivers using
this still, nouveau and tinydrm. To fix this, introduce a new
drm_atomic_helper_shutdown() by extracting the code from i915.

While at it improve kernel-doc and catch future offenders by
sprinkling a WARN_ON into the legacy function. We should probably move
those into the legacy modeset helpers, too ...

v2: Make it compile on arm drivers too (Noralf).

v3: Correct kerneldoc to point at _disable_all().
Reviewed-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: NNoralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Tested-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321164149.31531-1-daniel.vetter@ffwll.ch

It seems that nouveau requires this, so best to do this in the helper.
This allows nouveau to use the atomic suspend helper.

Cc: nouveau@lists.freedesktop.org
Acked-by: Ben Skeggs <bskeggs@redhat.com> #irc
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1487685102-31991-2-git-send-email-maarten.lankhorst@linux.intel.com

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

As it turns out, on cards that actually have CRTCs on them we're already
calling drm_kms_helper_poll_enable(drm_dev) from
nouveau_display_resume() before we call it in
nouveau_pmops_runtime_resume(). This leads us to accidentally trying to
enable polling twice, which results in a potential deadlock between the
RPM locks and drm_dev->mode_config.mutex if we end up trying to enable
polling the second time while output_poll_execute is running and holding
the mode_config lock. As such, make sure we only enable polling in
nouveau_pmops_runtime_resume() if we need to.

This fixes hangs observed on the ThinkPad W541
Signed-off-by: NLyude <lyude@redhat.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Kilian Singer <kilian.singer@quantumtechnology.info>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: David Airlie <airlied@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use drm_crtc_from_index() to find drm_crtc for given index.
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1483961145-18453-5-git-send-email-shawnguo@kernel.org

This check is useful for drivers that do not have DRIVER_ATOMIC set but
have atomic modesetting internally implemented. Wrap the check into a
function since this is used in many places and as a bonus, the function
name helps to document what the check is for.

v2:
Change return type to bool (Ville)
Move the function drm_atomic.h (Daniel)
Fixed comment marker for documentation
Suggested-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: NDhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
[danvet: Move back to drmP.h because include hell.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1482396643-32456-1-git-send-email-dhinakaran.pandiyan@intel.com

Replace uses of fb->bits_per_pixel with fb->format->cpp[0]*8.
Less duplicated information is a good thing.

Note that I didn't put parens around the cpp*8 in the below cocci script,
on account of not wanting spurious parens all over the place. Instead I
did the unsafe way, and tried to look over the entire diff to spot if
any dangerous expressions were produced. I didn't see any.

There are some cases where previously the code did X*bpp/8, so the
division happened after the multiplication. Those are now just X*cpp
so the division effectively happens before the multiplication,
but that is perfectly fine since bpp is always a multiple of 8.

@@
struct drm_framebuffer *FB;
expression E;
@@
 drm_helper_mode_fill_fb_struct(...) {
	...
-	FB->bits_per_pixel = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 i9xx_get_initial_plane_config(...) {
	...
-	FB->bits_per_pixel = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 ironlake_get_initial_plane_config(...) {
	...
-	FB->bits_per_pixel = E;
	...
 }

@@
struct drm_framebuffer *FB;
expression E;
@@
 skylake_get_initial_plane_config(...) {
	...
-	FB->bits_per_pixel = E;
	...
 }

@@
struct drm_framebuffer FB;
expression E;
@@
(
- E * FB.bits_per_pixel / 8
+ E * FB.format->cpp[0]
|
- FB.bits_per_pixel / 8
+ FB.format->cpp[0]
|
- E * FB.bits_per_pixel >> 3
+ E * FB.format->cpp[0]
|
- FB.bits_per_pixel >> 3
+ FB.format->cpp[0]
|
- (FB.bits_per_pixel + 7) / 8
+ FB.format->cpp[0]
|
- FB.bits_per_pixel
+ FB.format->cpp[0] * 8
|
- FB.format->cpp[0] * 8 != 8
+ FB.format->cpp[0] != 1
)

@@
struct drm_framebuffer *FB;
expression E;
@@
(
- E * FB->bits_per_pixel / 8
+ E * FB->format->cpp[0]
|
- FB->bits_per_pixel / 8
+ FB->format->cpp[0]
|
- E * FB->bits_per_pixel >> 3
+ E * FB->format->cpp[0]
|
- FB->bits_per_pixel >> 3
+ FB->format->cpp[0]
|
- (FB->bits_per_pixel + 7) / 8
+ FB->format->cpp[0]
|
- FB->bits_per_pixel
+ FB->format->cpp[0] * 8
|
- FB->format->cpp[0] * 8 != 8
+ FB->format->cpp[0] != 1
)

@@
struct drm_plane_state *state;
expression E;
@@
(
- E * state->fb->bits_per_pixel / 8
+ E * state->fb->format->cpp[0]
|
- state->fb->bits_per_pixel / 8
+ state->fb->format->cpp[0]
|
- E * state->fb->bits_per_pixel >> 3
+ E * state->fb->format->cpp[0]
|
- state->fb->bits_per_pixel >> 3
+ state->fb->format->cpp[0]
|
- (state->fb->bits_per_pixel + 7) / 8
+ state->fb->format->cpp[0]
|
- state->fb->bits_per_pixel
+ state->fb->format->cpp[0] * 8
|
- state->fb->format->cpp[0] * 8 != 8
+ state->fb->format->cpp[0] != 1
)

@@
@@
- (8 * 8)
+ 8 * 8

@@
struct drm_framebuffer FB;
@@
- (FB.format->cpp[0])
+ FB.format->cpp[0]

@@
struct drm_framebuffer *FB;
@@
- (FB->format->cpp[0])
+ FB->format->cpp[0]

@@
@@
 struct drm_framebuffer {
	 ...
-	 int bits_per_pixel;
	 ...
 };

v2: Clean up the 'cpp*8 != 8' and '(8 * 8)' cases (Laurent)
v3: Adjusted the semantic patch a bit and regenerated due to code
    changes
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1)
Link: http://patchwork.freedesktop.org/patch/msgid/1481751140-18352-1-git-send-email-ville.syrjala@linux.intel.com

Pass the drm_device to drm_helper_mode_fill_fb_struct() so that we can
populate fb->dev early. Will make it easier to use the fb before we
register it.

@@
identifier fb, mode_cmd;
@@
 void drm_helper_mode_fill_fb_struct(
+				     struct drm_device *dev,
				     struct drm_framebuffer *fb,
				     const struct drm_mode_fb_cmd2 *mode_cmd
				     );

@@
identifier fb, mode_cmd;
@@
 void drm_helper_mode_fill_fb_struct(
+				     struct drm_device *dev,
				     struct drm_framebuffer *fb,
				     const struct drm_mode_fb_cmd2 *mode_cmd
				     )
{ ... }

@@
function func;
identifier dev;
expression E1, E2;
@@
func(struct drm_device *dev, ...)
{
 ...
 drm_helper_mode_fill_fb_struct(
+				dev,
				E1, E2);
 ...
}

@@
expression E1, E2;
@@
 drm_helper_mode_fill_fb_struct(
+				dev,
				E1, E2);

v2: Rerun spatch due to code changes
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481748539-18283-1-git-send-email-ville.syrjala@linux.intel.com

We need to call drm_helper_hpd_irq_event() on resume to properly detect
monitor connection / disconnection on some laptops. For runtime-resume
(which gets called on resume from normal suspend too) we must call
drm_helper_hpd_irq_event() from a workqueue to avoid a deadlock.

Rename acpi_work to hpd_work, and move it out of the #ifdef CONFIG_ACPI
blocks to make it suitable for generic work.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Various notebooks with nvidia GPUs generate an ACPI_VIDEO_NOTIFY_PROBE
acpi-video event when an external device gets plugged in (and again on
modesets on that connector), the default behavior in the acpi-video
driver for this is to send a KEY_SWITCHVIDEOMODE evdev event, which
causes e.g. gnome-settings-daemon to ask us to rescan the connectors
(good), but also causes g-s-d to switch to mirror mode on a newly plugged
monitor rather then using the monitor to extend the desktop (bad)
as KEY_SWITCHVIDEOMODE is supposed to switch between extend the desktop
vs mirror mode.

More troublesome are the repeated ACPI_VIDEO_NOTIFY_PROBE events on
changing the mode on the connector, which cause g-s-d to switch
between mirror/extend mode, which causes a new ACPI_VIDEO_NOTIFY_PROBE
event and we end up with an endless loop.

This commit fixes this by adding an acpi notifier block handler to
nouveau_display.c to intercept ACPI_VIDEO_NOTIFY_PROBE and:

1) Wake-up runtime suspended GPUs and call drm_helper_hpd_irq_event()
   on them, this is necessary in some cases for the GPU to detect connector
   hotplug events while runtime suspended
2) Return NOTIFY_BAD to stop acpi-video from emitting a bogus
   KEY_SWITCHVIDEOMODE key-press event

There already is another acpi notifier block handler registered in
drivers/gpu/drm/nouveau/nvkm/engine/device/acpi.c, but that is not
suitable since that one gets unregistered on runtime suspend, and
we also want to intercept ACPI_VIDEO_NOTIFY_PROBE when runtime suspended.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>

With atomic nv50+ is already converted over to them, but the old
display code is still using it. Found in a 2 year old patch I have
lying around to un-export these old helpers!

v2: Drop the hand-rolled versions from resume/suspend code. Now that
crtc callbacks do this, we don't need a special case for s/r anymore.

v3: Remove unused variables.

v4: Don't remove drm_crtc_vblank_off from suspend paths, non-atomic
nouveau still needs that. But still switch to drm_crtc_vblank_off
since drm_vblank_off will disappear.

Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161114114101.21731-1-daniel.vetter@ffwll.ch

This is now handled by prepare_fb().  Legacy flips were the last user.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Made completely unreachable (and broken) by atomic commits.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This commit implements the atomic commit interfaces, and implements the
legacy modeset and page flipping interfaces on top of them.

There's two major changes in behavior from before:

- We're now making use of interlocks between core and satellite EVO
  channels, which greatly improves our ability to keep their states
  synchronised.
- DPMS is now implemented as a full modeset to either tear down the
  entire pipe (or bring it back up).  This choice was made mostly
  to ease the initial implementation, but I'm also not sure what we
  gain by bring backing the old behaviour.  We shall see.

This does NOT currently expose the atomic ioctl by default, due to
limited testing having been performed.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This is different from the equivilant functions in the atomic helpers in
that we fully disable the pipe instead of just setting it to inactive.

We do this (primarily) to ensure the framebuffer cleanup paths are hit,
allowing buffers to be un-pinned from memory so they can be evicted to
system memory and not lose their contents while suspended.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This will ensure we have some kind of initial atomic state for all objects
after initialisation.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

nouveau_display_fini() is responsible for quiescing the hardware, so
this is where such actions belong.

More than that, nouveau_display_fini() switches off the receiving of
sink irqs, which MST will require while shutting down an active head.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We get a few warnings when building kernel with W=1:
drivers/gpu/drm/nouveau/nvkm/subdev/bios/fan.c:29:1: warning: no previous prototype for 'nvbios_fan_table' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/bios/fan.c:56:1: warning: no previous prototype for 'nvbios_fan_entry' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/clk/gt215.c:184:1: warning: no previous prototype for 'gt215_clk_info' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgt215.c:99:1: warning: no previous prototype for 'gt215_link_train_calc' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgt215.c:153:1: warning: no previous prototype for 'gt215_link_train' [-Wmissing-prototypes]
drivers/gpu/drm/nouveau/nvkm/subdev/fb/ramgt215.c:271:1: warning: no previous prototype for 'gt215_link_train_init' [-Wmissing-prototypes]
....

In fact, both functions are only used in the file in which they are
declared and don't need a declaration, but can be made static.
So this patch marks these functions with 'static'.
Signed-off-by: NBaoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Remove legacy usage of drm_handle_vblank()
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1467677092-5089-4-git-send-email-gustavo@padovan.org

nouveau leaks a runtime pm ref if at least one CRTC is enabled on
unload. The ref is taken by nouveau_crtc_set_config() and held as long
as a CRTC is in use.

nv04_display_destroy() should solve this by turning off all CRTCs, but

(1) nv50_display_destroy() doesn't do the same and

(2) it's broken since commit d6bf2f37 ("drm/nouveau: run mode_config
    destructor before destroying internal display state") because the
    crtc structs are torn down by drm_mode_config_cleanup() before being
    turned off. Also, there's no locking.

Move the code to turn off all CRTCs from nv04_display_destroy() to
nouveau_display_destroy() so that it's called for both nv04 and nv50
and before drm_mode_config_cleanup(). Use drm_crtc_force_disable_all()
helper to save on code and have proper locking.

Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/66daa161322444bbde05d83cb0210b90a66988a4.1465392124.git.lukas@wunner.de

Replace the legacy drm_send_vblank_event(), drm_arm_vblank_event() and
drm_vblank_{get,put}() with the new helper functions.

v2: add crtc to nouveau_page_flip_state (comment from Mario Kleiner)
Signed-off-by: NGustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1465308482-15104-1-git-send-email-gustavo@padovan.org

drm_gem_object_lookup() has never required the drm_device for its file
local translation of the user handle to the GEM object. Let's remove the
unused parameter and save some space.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: dri-devel@lists.freedesktop.org
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
[danvet: Fixup kerneldoc too.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Not used any more.
Reviewed-by: NSinclair Yeh <syeh@vmware.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For drm_gem_object_unreference callers are required to hold
dev->struct_mutex, which these paths don't. Enforcing this requirement
has become a bit more strict with

commit ef4c6270
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Oct 15 09:36:25 2015 +0200

    drm/gem: Check locking in drm_gem_object_unreference

Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1459330852-27668-2-git-send-email-daniel.vetter@ffwll.ch

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

In the display resume path, move the calls to drm_vblank_on()
after the point when the display engine is running again.

Since changes were made to drm_update_vblank_count() in Linux 4.4+
to emulate hw vblank counters via vblank timestamping, the function
drm_vblank_on() now needs working high precision vblank timestamping
and therefore working scanout position queries at time of call.
These don't work before the display engine gets restarted, causing
miscalculation of vblank counter increments and thereby large forward
jumps in vblank count at display resume. These jumps can cause client
hangs on resume, or desktop hangs in the case of composited desktops.

Fix this Linux 4.4 regression by reordering calls accordingly.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Cc: <stable@vger.kernel.org> # 4.4+
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: ville.syrjala@linux.intel.com
Cc: daniel.vetter@ffwll.ch
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Apparently pre-nv50 pageflip events happen before the actual vblank
period. Therefore that functionality got semi-disabled in

commit af4870e4
Author: Mario Kleiner <mario.kleiner.de@gmail.com>
Date:   Tue May 13 00:42:08 2014 +0200

    drm/nouveau/kms/nv04-nv40: fix pageflip events via special case.

Unfortunately that hack got uprooted in

commit cc1ef118
Author: Thierry Reding <treding@nvidia.com>
Date:   Wed Aug 12 17:00:31 2015 +0200

    drm/irq: Make pipe unsigned and name consistent

Triggering a warning when trying to sample the vblank timestamp for a
non-existing pipe. There's a few ways to fix this:

- Open-code the old behaviour, which just enshrines this slight
  breakage of the userspace ABI.

- Revert Mario's commit and again inflict broken timestamps, again not
  pretty.

- Fix this for real by delaying the pageflip TS until the next vblank
  interrupt, thereby making it accurate.

This patch implements the third option. Since having a page flip
interrupt that happens when the pageflip gets armed and not when it
completes in the next vblank seems to be fairly common (older i915 hw
works very similarly) create a new helper to arm vblank events for
such drivers.

v2 (Mario Kleiner):
- Fix function prototypes in drmP.h
- Add missing vblank_put() for pageflip completion without
  pageflip event.
- Initialize sequence number for queued pageflip event to avoid
  trouble in drm_handle_vblank_events().
- Remove dead code and spelling fix.

v3 (Mario Kleiner):
- Add a signed-off-by and cc stable tag per Ilja's advice.

v4 (Thierry Reding):
- Fix kerneldoc typo, discovered by Michel Dänzer
- Rearrange tags and changelog

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=106431
Cc: Thierry Reding <treding@nvidia.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Acked-by: NBen Skeggs <bskeggs@redhat.com>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Cc: stable@vger.kernel.org # v4.3
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Drivers shouldn't clobber the passed in addfb ioctl parameters.
i915 was doing just that. To prevent it from happening again,
pass the struct around as const, starting all the way from
internal_framebuffer_create().
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

No longer required in a lot of cases, as objects are identified over NVIF
via an alternate mechanism since the rework.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>