Introduce a KVM selftest to verify that userspace manipulation of the
TSC (via the new vCPU attribute) results in the correct behavior within
the guest.
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Message-Id: <20210916181555.973085-6-oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

vCPU file descriptors are abstracted away from test code in KVM
selftests, meaning that tests cannot directly access a vCPU's device
attributes. Add helpers that tests can use to get at vCPU device
attributes.
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Message-Id: <20210916181555.973085-5-oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The KVM_CREATE_DEVICE and KVM_{GET,SET}_DEVICE_ATTR ioctls are defined
to return a value of zero on success. As such, tighten the assertions in
the helper functions to only pass if the return code is zero.
Suggested-by: NAndrew Jones <drjones@redhat.com>
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Message-Id: <20210916181555.973085-4-oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a selftest for the new KVM clock UAPI that was introduced. Ensure
that the KVM clock is consistent between userspace and the guest, and
that the difference in realtime will only ever cause the KVM clock to
advance forward.

Cc: Andrew Jones <drjones@redhat.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Message-Id: <20210916181555.973085-3-oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Copy over approximately clean versions of the pvclock headers into
tools. Reconcile headers/symbols missing in tools that are unneeded.
Signed-off-by: NOliver Upton <oupton@google.com>
Message-Id: <20210916181555.973085-2-oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

To date, VMM-directed TSC synchronization and migration has been a bit
messy. KVM has some baked-in heuristics around TSC writes to infer if
the VMM is attempting to synchronize. This is problematic, as it depends
on host userspace writing to the guest's TSC within 1 second of the last
write.

A much cleaner approach to configuring the guest's views of the TSC is to
simply migrate the TSC offset for every vCPU. Offsets are idempotent,
and thus not subject to change depending on when the VMM actually
reads/writes values from/to KVM. The VMM can then read the TSC once with
KVM_GET_CLOCK to capture a (realtime, host_tsc) pair at the instant when
the guest is paused.

Cc: David Matlack <dmatlack@google.com>
Cc: Sean Christopherson <seanjc@google.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210916181538.968978-8-oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Refactor kvm_synchronize_tsc to make a new function that allows callers
to specify TSC parameters (offset, value, nanoseconds, etc.) explicitly
for the sake of participating in TSC synchronization.
Signed-off-by: NOliver Upton <oupton@google.com>
Message-Id: <20210916181538.968978-7-oupton@google.com>
[Make sure kvm->arch.cur_tsc_generation and vcpu->arch.this_tsc_generation are
 equal at the end of __kvm_synchronize_tsc, if matched is false. Reported by
 Maxim Levitsky. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Protect the reference point for kvmclock with a seqcount, so that
kvmclock updates for all vCPUs can proceed in parallel.  Xen runstate
updates will also run in parallel and not bounce the kvmclock cacheline.

Of the variables that were protected by pvclock_gtod_sync_lock,
nr_vcpus_matched_tsc is different because it is updated outside
pvclock_update_vm_gtod_copy and read inside it.  Therefore, we
need to keep it protected by a spinlock.  In fact it must now
be a raw spinlock, because pvclock_update_vm_gtod_copy, being the
write-side of a seqcount, is non-preemptible.  Since we already
have tsc_write_lock which is a raw spinlock, we can just use
tsc_write_lock as the lock that protects the write-side of the
seqcount.
Co-developed-by: NOliver Upton <oupton@google.com>
Message-Id: <20210916181538.968978-6-oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Handling the migration of TSCs correctly is difficult, in part because
Linux does not provide userspace with the ability to retrieve a (TSC,
realtime) clock pair for a single instant in time. In lieu of a more
convenient facility, KVM can report similar information in the kvm_clock
structure.

Provide userspace with a host TSC & realtime pair iff the realtime clock
is based on the TSC. If userspace provides KVM_SET_CLOCK with a valid
realtime value, advance the KVM clock by the amount of elapsed time. Do
not step the KVM clock backwards, though, as it is a monotonic
oscillator.
Suggested-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NOliver Upton <oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Message-Id: <20210916181538.968978-5-oupton@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This is a new warning in clang top-of-tree (will be clang 14):

In file included from arch/x86/kvm/mmu/mmu.c:27:
arch/x86/kvm/mmu/spte.h:318:9: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical]
        return __is_bad_mt_xwr(rsvd_check, spte) |
               ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                                                 ||
arch/x86/kvm/mmu/spte.h:318:9: note: cast one or both operands to int to silence this warning

The code is fine, but change it anyway to shut up this clever clogs
of a compiler.

Reported-by: torvic9@mailbox.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

If allocation of rmaps fails, but some of the pointers have already been written,
those pointers can be cleaned up when the memslot is freed, or even reused later
for another attempt at allocating the rmaps.  Therefore there is no need to
WARN, as done for example in memslot_rmap_alloc, but the allocation *must* be
skipped lest KVM will overwrite the previous pointer and will indeed leak memory.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

This looks like a typo in 8f32d5e5. This change didn't intend to do
any functional changes.

The problem was caught by gVisor tests.

Fixes: 8f32d5e5 ("KVM: x86/mmu: allow kvm_faultin_pfn to return page fault handling code")
Cc: Maxim Levitsky <mlevitsk@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NAndrei Vagin <avagin@gmail.com>
Message-Id: <20211015163221.472508-1-avagin@gmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvmarm-fixes-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 5.15, take #2

- Properly refcount pages used as a concatenated stage-2 PGD
- Fix missing unlock when detecting the use of MTE+VM_SHARED

The size of the data in the scratch buffer is not divided by the size of
each port I/O operation, so vcpu->arch.pio.count ends up being larger
than it should be by a factor of size.

Cc: stable@vger.kernel.org
Fixes: 7ed9abfe ("KVM: SVM: Support string IO operations for an SEV-ES guest")
Acked-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

VM_SHARED mappings are currently forbidden in a memslot with MTE to
prevent two VMs racing to sanitise the same page. However, this check
is performed while holding current->mm's mmap_lock, but fails to release
it. Fix this by releasing the lock when needed.

Fixes: ea7fc1bb ("KVM: arm64: Introduce MTE VM feature")
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211005122031.809857-1-qperret@google.com

Some of the refcount manipulation helpers used at EL2 are instrumented
to catch a corrupted state, but not all of them are treated equally. Let's
make things more consistent by instrumenting hyp_page_ref_dec_and_test()
as well.
Acked-by: NWill Deacon <will@kernel.org>
Suggested-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211005090155.734578-6-qperret@google.com

The KVM page-table library refcounts the pages of concatenated stage-2
PGDs individually. However, when running KVM in protected mode, the
host's stage-2 PGD is currently managed by EL2 as a single high-order
compound page, which can cause the refcount of the tail pages to reach 0
when they shouldn't, hence corrupting the page-table.

Fix this by introducing a new hyp_split_page() helper in the EL2 page
allocator (matching the kernel's split_page() function), and make use of
it from host_s2_zalloc_pages_exact().

Fixes: 1025c8c0 ("KVM: arm64: Wrap the host with a stage 2")
Acked-by: NWill Deacon <will@kernel.org>
Suggested-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211005090155.734578-5-qperret@google.com

Initial KVM RISC-V support

Following features are supported by the initial KVM RISC-V support:
1. No RISC-V specific KVM IOCTL
2. Loadable KVM RISC-V module
3. Minimal possible KVM world-switch which touches only GPRs and few CSRs
4. Works on both RV64 and RV32 host
5. Full Guest/VM switch via vcpu_get/vcpu_put infrastructure
6. KVM ONE_REG interface for VCPU register access from KVM user-space
7. Interrupt controller emulation in KVM user-space
8. Timer and IPI emuation in kernel
9. Both Sv39x4 and Sv48x4 supported for RV64 host
10. MMU notifiers supported
11. Generic dirty log supported
12. FP lazy save/restore supported
13. SBI v0.1 emulation for Guest/VM
14. Forward unhandled SBI calls to KVM user-space
15. Hugepage support for Guest/VM
16. IOEVENTFD support for Vhost

Add myself as maintainer for KVM RISC-V and Atish as designated reviewer.
Signed-off-by: NAtish Patra <atish.patra@wdc.com>
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

Document RISC-V specific parts of the KVM API, such as:
 - The interrupt numbers passed to the KVM_INTERRUPT ioctl.
 - The states supported by the KVM_{GET,SET}_MP_STATE ioctls.
 - The registers supported by the KVM_{GET,SET}_ONE_REG interface
   and the encoding of those register ids.
 - The exit reason KVM_EXIT_RISCV_SBI for SBI calls forwarded to
   userspace tool.

CC: Jonathan Corbet <corbet@lwn.net>
CC: linux-doc@vger.kernel.org
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

The KVM host kernel is running in HS-mode needs so we need to handle
the SBI calls coming from guest kernel running in VS-mode.

This patch adds SBI v0.1 support in KVM RISC-V. Almost all SBI v0.1
calls are implemented in KVM kernel module except GETCHAR and PUTCHART
calls which are forwarded to user space because these calls cannot be
implemented in kernel space. In future, when we implement SBI v0.2 for
Guest, we will forward SBI v0.2 experimental and vendor extension calls
to user space.
Signed-off-by: NAtish Patra <atish.patra@wdc.com>
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

Add a KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctl interface for floating
point registers such as F0-F31 and FCSR. This support is added for
both 'F' and 'D' extensions.
Signed-off-by: NAtish Patra <atish.patra@wdc.com>
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This patch adds floating point (F and D extension) context save/restore
for guest VCPUs. The FP context is saved and restored lazily only when
kernel enter/exits the in-kernel run loop and not during the KVM world
switch. This way FP save/restore has minimal impact on KVM performance.
Signed-off-by: NAtish Patra <atish.patra@wdc.com>
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

The RISC-V hypervisor specification doesn't have any virtual timer
feature.

Due to this, the guest VCPU timer will be programmed via SBI calls.
The host will use a separate hrtimer event for each guest VCPU to
provide timer functionality. We inject a virtual timer interrupt to
the guest VCPU whenever the guest VCPU hrtimer event expires.

This patch adds guest VCPU timer implementation along with ONE_REG
interface to access VCPU timer state from user space.
Signed-off-by: NAtish Patra <atish.patra@wdc.com>
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This patch implements MMU notifiers for KVM RISC-V so that Guest
physical address space is in-sync with Host physical address space.

This will allow swapping, page migration, etc to work transparently
with KVM RISC-V.
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This patch implements all required functions for programming
the stage2 page table for each Guest/VM.

At high-level, the flow of stage2 related functions is similar
from KVM ARM/ARM64 implementation but the stage2 page table
format is quite different for KVM RISC-V.

[jiangyifei: stage2 dirty log support]
Signed-off-by: NYifei Jiang <jiangyifei@huawei.com>
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

We implement a simple VMID allocator for Guests/VMs which:
1. Detects number of VMID bits at boot-time
2. Uses atomic number to track VMID version and increments
   VMID version whenever we run-out of VMIDs
3. Flushes Guest TLBs on all host CPUs whenever we run-out
   of VMIDs
4. Force updates HW Stage2 VMID for each Guest VCPU whenever
   VMID changes using VCPU request KVM_REQ_UPDATE_HGATP
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

We get illegal instruction trap whenever Guest/VM executes WFI
instruction.

This patch handles WFI trap by blocking the trapped VCPU using
kvm_vcpu_block() API. The blocked VCPU will be automatically
resumed whenever a VCPU interrupt is injected from user-space
or from in-kernel IRQCHIP emulation.
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

We will get stage2 page faults whenever Guest/VM access SW emulated
MMIO device or unmapped Guest RAM.

This patch implements MMIO read/write emulation by extracting MMIO
details from the trapped load/store instruction and forwarding the
MMIO read/write to user-space. The actual MMIO emulation will happen
in user-space and KVM kernel module will only take care of register
updates before resuming the trapped VCPU.

The handling for stage2 page faults for unmapped Guest RAM will be
implemeted by a separate patch later.

[jiangyifei: ioeventfd and in-kernel mmio device support]
Signed-off-by: NYifei Jiang <jiangyifei@huawei.com>
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This patch implements the VCPU world-switch for KVM RISC-V.

The KVM RISC-V world-switch (i.e. __kvm_riscv_switch_to()) mostly
switches general purpose registers, SSTATUS, STVEC, SSCRATCH and
HSTATUS CSRs. Other CSRs are switched via vcpu_load() and vcpu_put()
interface in kvm_arch_vcpu_load() and kvm_arch_vcpu_put() functions
respectively.
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

For KVM RISC-V, we use KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls to access
VCPU config and registers from user-space.

We have three types of VCPU registers:
1. CONFIG - these are VCPU config and capabilities
2. CORE   - these are VCPU general purpose registers
3. CSR    - these are VCPU control and status registers

The CONFIG register available to user-space is ISA. The ISA register is
a read and write register where user-space can only write the desired
VCPU ISA capabilities before running the VCPU.

The CORE registers available to user-space are PC, RA, SP, GP, TP, A0-A7,
T0-T6, S0-S11 and MODE. Most of these are RISC-V general registers except
PC and MODE. The PC register represents program counter whereas the MODE
register represent VCPU privilege mode (i.e. S/U-mode).

The CSRs available to user-space are SSTATUS, SIE, STVEC, SSCRATCH, SEPC,
SCAUSE, STVAL, SIP, and SATP. All of these are read/write registers.

In future, more VCPU register types will be added (such as FP) for the
KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls.
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This patch implements VCPU interrupts and requests which are both
asynchronous events.

The VCPU interrupts can be set/unset using KVM_INTERRUPT ioctl from
user-space. In future, the in-kernel IRQCHIP emulation will use
kvm_riscv_vcpu_set_interrupt() and kvm_riscv_vcpu_unset_interrupt()
functions to set/unset VCPU interrupts.

Important VCPU requests implemented by this patch are:
KVM_REQ_SLEEP       - set whenever VCPU itself goes to sleep state
KVM_REQ_VCPU_RESET  - set whenever VCPU reset is requested

The WFI trap-n-emulate (added later) will use KVM_REQ_SLEEP request
and kvm_riscv_vcpu_has_interrupt() function.

The KVM_REQ_VCPU_RESET request will be used by SBI emulation (added
later) to power-up a VCPU in power-off state. The user-space can use
the GET_MPSTATE/SET_MPSTATE ioctls to get/set power state of a VCPU.
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This patch implements VCPU create, init and destroy functions
required by generic KVM module. We don't have much dynamic
resources in struct kvm_vcpu_arch so these functions are quite
simple for KVM RISC-V.
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This patch adds initial skeletal KVM RISC-V support which has:
1. A simple implementation of arch specific VM functions
   except kvm_vm_ioctl_get_dirty_log() which will implemeted
   in-future as part of stage2 page loging.
2. Stubs of required arch specific VCPU functions except
   kvm_arch_vcpu_ioctl_run() which is semi-complete and
   extended by subsequent patches.
3. Stubs for required arch specific stage2 MMU functions.
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>

This patch adds asm/kvm_csr.h for RISC-V hypervisor extension
related defines.
Signed-off-by: NAnup Patel <anup.patel@wdc.com>
Reviewed-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAlexander Graf <graf@amazon.com>
Message-Id: <20210927114016.1089328-2-anup.patel@wdc.com>
Acked-by: NPalmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvm-s390-master-5.15-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master

KVM: s390: allow to compile without warning with W=1

Avoid allocating the gfn_track arrays if nothing needs them. If there
are no external to KVM users of the API (i.e. no GVT-g), then page
tracking is only needed for shadow page tables. This means that when tdp
is enabled and there are no external users, then the gfn_track arrays
can be lazily allocated when the shadow MMU is actually used. This avoid
allocations equal to .05% of guest memory when nested virtualization is
not used, if the kernel is compiled without GVT-g.
Signed-off-by: NDavid Stevens <stevensd@chromium.org>
Message-Id: <20210922045859.2011227-3-stevensd@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add a config option that allows kvm to determine whether or not there
are any external users of page tracking.
Signed-off-by: NDavid Stevens <stevensd@chromium.org>
Message-Id: <20210922045859.2011227-2-stevensd@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

According to section "TLB Flush" in APM vol 2,

    "Support for TLB_CONTROL commands other than the first two, is
     optional and is indicated by CPUID Fn8000_000A_EDX[FlushByAsid].

     All encodings of TLB_CONTROL not defined in the APM are reserved."
Signed-off-by: NKrish Sadhukhan <krish.sadhukhan@oracle.com>
Message-Id: <20210920235134.101970-3-krish.sadhukhan@oracle.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>