The wrappers in include/linux/pci-dma-compat.h should go away.

The patch has been generated with the coccinelle script below.

It has been hand modified to use 'dma_set_mask_and_coherent()' instead of
'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable.
This is less verbose.

It has been compile tested.

@@
@@
-    PCI_DMA_BIDIRECTIONAL
+    DMA_BIDIRECTIONAL

@@
@@
-    PCI_DMA_TODEVICE
+    DMA_TO_DEVICE

@@
@@
-    PCI_DMA_FROMDEVICE
+    DMA_FROM_DEVICE

@@
@@
-    PCI_DMA_NONE
+    DMA_NONE

@@
expression e1, e2, e3;
@@
-    pci_alloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3;
@@
-    pci_zalloc_consistent(e1, e2, e3)
+    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)

@@
expression e1, e2, e3, e4;
@@
-    pci_free_consistent(e1, e2, e3, e4)
+    dma_free_coherent(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_single(e1, e2, e3, e4)
+    dma_map_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_single(e1, e2, e3, e4)
+    dma_unmap_single(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4, e5;
@@
-    pci_map_page(e1, e2, e3, e4, e5)
+    dma_map_page(&e1->dev, e2, e3, e4, e5)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_page(e1, e2, e3, e4)
+    dma_unmap_page(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_map_sg(e1, e2, e3, e4)
+    dma_map_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_unmap_sg(e1, e2, e3, e4)
+    dma_unmap_sg(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
+    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_single_for_device(e1, e2, e3, e4)
+    dma_sync_single_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
+    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)

@@
expression e1, e2, e3, e4;
@@
-    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
+    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)

@@
expression e1, e2;
@@
-    pci_dma_mapping_error(e1, e2)
+    dma_mapping_error(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_dma_mask(e1, e2)
+    dma_set_mask(&e1->dev, e2)

@@
expression e1, e2;
@@
-    pci_set_consistent_dma_mask(e1, e2)
+    dma_set_coherent_mask(&e1->dev, e2)

Link: https://lore.kernel.org/r/259e53b7a00f64bf081d41da8761b171b2ad8f5c.1629634798.git.christophe.jaillet@wanadoo.frSigned-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

current_seq was removed since the commit below.

Fixes: 36f30e48 ("IB/core: Improve ODP to use hmm_range_fault()")
Link: https://lore.kernel.org/r/20210823035246.3506-1-lizhijian@cn.fujitsu.comSigned-off-by: NLi Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The vector field naming is quite confusing, it is better referred to as
irqn.

Link: https://lore.kernel.org/r/20210811151131.39138-4-galpress@amazon.comReviewed-by: NFiras JahJah <firasj@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The cpu field in efa_irq struct is unused, remove it.

Link: https://lore.kernel.org/r/20210811151131.39138-3-galpress@amazon.comReviewed-by: NFiras JahJah <firasj@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Casting to (void) does nothing, remove them.

Link: https://lore.kernel.org/r/20210806112112.124313-7-haris.iqbal@ionos.comSuggested-by: NLeon Romanovsky <leon@kernel.org>
Signed-off-by: NGioh Kim <gi-oh.kim@ionos.com>
Reviewed-by: NMd Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: NJack Wang <jinpu.wang@ionos.com>
Signed-off-by: NMd Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

There are mis-match at counting inflight IO after changing the multipath
policy.

For example, we started fio test with round-robin policy and then we
changed the policy to min-inflight. IOs created under the RR policy is
finished under the min-inflight policy and inflight counter only
decreased. So the counter would be negative value.  And also we started
fio test with min-inflight policy and changed the policy to the
round-robin. IOs created under the min-inflight policy increased the
inflight IO counter but the inflight IO counter was not decreased because
the policy was the round-robin when IO was finished.

So it should count IOs only if the IO is created under the min-inflight
policy. It should not care the policy when the IO is finished.

This patch adds a field mp_policy in struct rtrs_clt_io_req and stores the
multipath policy when an object of rtrs_clt_io_req is created. Then
rtrs-clt checks the mp_policy of only struct rtrs_clt_io_req instead of
the struct rtrs_clt.

Link: https://lore.kernel.org/r/20210806112112.124313-6-haris.iqbal@ionos.comSigned-off-by: NGioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: NJack Wang <jinpu.wang@ionos.com>
Reviewed-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NMd Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The IO performance test with fio after swapping the likely and unlikely
macros in all if-statement shows no difference.  They do not help for the
performance of rtrs.

Thanks to Haakon Bugge for the test scenario.

The fio test did random read on 32 rnbd devices and 64 processes.
Test environment:
- Intel(R) Xeon(R) Gold 6130 CPU @ 2.10GHz
- 376G memory
- kernel version: 5.4.86
- gcc version: gcc (Debian 8.3.0-6) 8.3.0
- Infiniband controller: Mellanox Technologies MT27800 Family [ConnectX-5]

Test result:
- before swapping:       IOPS=829k, BW=3239MiB/s
- after swapping:        IOPS=829k, BW=3238MiB/s
- remove all (un)likely: IOPS=829k, BW=3238MiB/s

Link: https://lore.kernel.org/r/20210806112112.124313-5-haris.iqbal@ionos.comSigned-off-by: NGioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: NJack Wang <jinpu.wang@ionos.com>
Reviewed-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NMd Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The two functions are unused, so just remove them.

Link: https://lore.kernel.org/r/20210806112112.124313-3-haris.iqbal@ionos.comSigned-off-by: NJack Wang <jinpu.wang@ionos.com>
Reviewed-by: NMd Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NMd Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

When all the paths are removed for a session, the addition of the first
path is like a new session for the storage server.

Hence, for_new_clt has to be set to 1.

Link: https://lore.kernel.org/r/20210806112112.124313-2-haris.iqbal@ionos.comSigned-off-by: NMd Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: NJack Wang <jinpu.wang@ionos.com>
Reviewed-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Saeed Mahameed says:
====================

This pulls mlx5-next branch which includes patches already reviewed on
net-next and rdma mailing lists.

1) mlx5 single E-Switch FDB for lag

2) IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq

3) Add DCS caps & fields support

We need this in net-next as multiple features are dependent on the
single FDB feature.

====================
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

* mellanox/mlx5-next:
  net/mlx5: Lag, Create shared FDB when in switchdev mode
  net/mlx5: E-Switch, add logic to enable shared FDB
  net/mlx5: Lag, move lag destruction to a workqueue
  net/mlx5: Lag, properly lock eswitch if needed
  net/mlx5: Add send to vport rules on paired device
  net/mlx5: E-Switch, Add event callback for representors
  net/mlx5e: Use shared mappings for restoring from metadata
  net/mlx5e: Add an option to create a shared mapping
  net/mlx5: E-Switch, set flow source for send to uplink rule
  RDMA/mlx5: Add shared FDB support
  {net, RDMA}/mlx5: Extend send to vport rules
  RDMA/mlx5: Fill port info based on the relevant eswitch
  net/mlx5: Lag, add initial logic for shared FDB
  net/mlx5: Return mdev from eswitch
  IB/mlx5: Rename is_apu_thread_cq function to is_apu_cq

ib_sa_service_rec_query() was introduced in kernel v2.6.13 by
commit cbae32c5 ("[PATCH] IB: Add Service Record support to SA client")
in 2005. It was not used then and have never been used since.

Removing it and related functions/structs.

Link: https://lore.kernel.org/r/1628702736-12651-1-git-send-email-haakon.bugge@oracle.comSigned-off-by: NHåkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Qedr code is tightly coupled with existing both INIT transitions.  Here,
during first INIT transition all variables are reset and the RESET state
is checked in post_recv() before any posting.

Commit dc70f7c3 ("RDMA/cma: Remove unnecessary INIT->INIT transition")
exposed this bug.

So moving variables reset to qedr_set_common_qp_params() and also avoid
RESET state check for post_recv().

Link: https://lore.kernel.org/r/20210811051650.14914-1-pkushwaha@marvell.comSigned-off-by: NMichal Kalderon <mkalderon@marvell.com>
Signed-off-by: NAriel Elior <aelior@marvell.com>
Signed-off-by: NShai Malin <smalin@marvell.com>
Signed-off-by: NPrabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Just use seq_write to copy the stats into the seq_file buffer instead of
poking holes into the seq_file abstraction.

Link: https://lore.kernel.org/r/20210810151711.1795374-1-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Tested-by: NMike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

'sess->rbufs' is known to be NULL here, so there is no point in kfree'ing
it.

Fixes: 6a98d71d ("RDMA/rtrs: client: main functionality")
Link: https://lore.kernel.org/r/9a57c9f837fa2c6f0070578a1bc4840688f62962.1628185335.git.christophe.jaillet@wanadoo.frSigned-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: NMd Haris Iqbal <haris.iqbal@ionos.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

If re-registering an MR in hns_roce_rereg_user_mr(), we should return NULL
instead of passing 0 to ERR_PTR for clarity.

Fixes: 4e9fc1da ("RDMA/hns: Optimize the MR registration process")
Link: https://lore.kernel.org/r/20210804125939.20516-1-yuehaibing@huawei.comSigned-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

If both eswitches are in switchdev mode and the uplink representors
are enslaved to the same bond device create a shared FDB configuration.

When moving to shared FDB mode not only the hardware needs be configured
but the RDMA driver needs to reconfigure itself.

When such change is done, unload the RDMA devices, configure the hardware
and load the RDMA representors.

When destroying the lag (can happen if a PCI function is unbinded,
driver is unloaded or by just removing a netdev from the bond) make sure
to restore the system to the previous state only if possible.

For example, if a PCI function is unbinded there is no need to load the
representors as the device is going away.
Signed-off-by: NMark Bloch <mbloch@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Shared FDB allows to direct traffic from all the vports in the HCA to a
single eswitch. In order to do that three things are needed.

1) Point the ingress ACL of the slave uplink to that of the master.
   With this, wire traffic from both uplinks will reach the same eswitch
   with the same metadata where a single steering rule can catch traffic
   from both ports.

2) Set the FDB root flow table of the slave's eswitch to that of the
   master. As this flow table can change dynamically make sure to
   sync it on any set root flow table FDB command.
   This will make sure traffic from SFs, VFs, ECPFs and PFs reach the
   master eswitch.

3) Split wire traffic at the eswitch manager egress ACL so that it's
   directed to the native eswitch manager. We only treat wire traffic
   from both ports the same at the eswitch level. If such traffic wasn't
   handled in the eswitch it needs to reach the right representor to be
   processed by software. For example LACP packets should *always*
   reach the right uplink representor for correct operation.
Signed-off-by: NMark Bloch <mbloch@nvidia.com>
Reviewed-by: NMark Zhang <markzhang@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

If a netdev is removed from the lag the lag should be destroyed.
With downstream patches this might trigger a reconfiguration of
representors on a different eswitch and such we don't have the proper
locking to so from this path. Move the destruction to be done by the
workqueue.

As the destruction won't affect the netdev side it okay to do so.
The RDMA side will be reconfigured and it already coded to handle such
reconfiguration.
Signed-off-by: NMark Bloch <mbloch@nvidia.com>
Reviewed-by: NMark Zhang <markzhang@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Currently when doing hardware lag we check the eswitch mode
but as this isn't done under a lock the check isn't valid.

As the code needs to sync between two different devices an extra
care is needed.

- When going to change eswitch mode, if hardware lag is active destroy it.
- While changing eswitch modes block any hardware bond creation.
- Delay handling bonding events until there are no mode changes in
  progress.
- When attaching a new mdev to lag, block until there is no mode change
  in progress. In order for the mode change to finish the interface lock
  will have to be taken. Release the lock and sleep for 100ms to
  allow forward progress. As this is a very rare condition (can happen if
  the user unbinds and binds a PCI function while also changing eswitch
  mode of the other PCI function) it has no real world impact.

As taking multiple eswitch mode locks is now required lockdep will
complain about a possible deadlock. Register a key per eswitch to make
lockdep happy.
Signed-off-by: NMark Bloch <mbloch@nvidia.com>
Reviewed-by: NMark Zhang <markzhang@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

When two mlx5 devices are paired in switchdev mode, always offload the
send-to-vport rule to the peer E-Switch. This allows to abstract
the logic when this is really necessary (single FDB) and combine
the logic of both cases into one.
Signed-off-by: NMark Bloch <mbloch@nvidia.com>
Reviewed-by: NMark Zhang <markzhang@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

This callback will allow to notify representors about relevant events
when in OFFLOADS mode. In downstream patches, this will be used to notify
about PAIR/UNPAIR devcom events.
Signed-off-by: NMark Bloch <mbloch@nvidia.com>
Reviewed-by: NMark Zhang <markzhang@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

FTEs are added with mapped metadata which is saved per eswitch.
When uplink reps are bonded and we are in a single FDB mode,
we could fail to find metadata which was stored on one eswitch mapping
but not the other or with a different id.
To resolve this issue use shared mapping between eswitch ports.
We do not have any conflict using a single mapping, for a type,
between the ports.
Signed-off-by: NRoi Dayan <roid@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

The shared mapping is identified by an id and type.
Signed-off-by: NRoi Dayan <roid@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Set the flow source param to local vport for the uplink rep
send-to-vport rule.

This will comply with the recent changes in SW steering that
use the flow source as an indication for the rule type - rx or tx.

Since the uplink send-to-vport rule is forwarding traffic to the wire
it has to indicate that it is an sx rule and can't use the any port
value in the flow source.
Signed-off-by: NAriel Levkovich <lariel@nvidia.com>
Reviewed-by: NRoi Dayan <roid@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Shared FDB allows to create a single RDMA device that holds representors
from both eswitches. As shared FDB is only active when both uplink
representors are enslaved there is a single RDMA port that represents
both uplinks.

The number of ports is the number of vports on both eswitches minus one
as we only need 1 port for both uplinks.
Signed-off-by: NMark Bloch <mbloch@nvidia.com>
Reviewed-by: NMark Zhang <markzhang@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

In shared FDB there is only one eswitch which is active and it receives
traffic from all representors and all vports in the HCA.

While the Ethernet representor will always reside on its native PF
the IB representor will not. Extend send to vport rule creation to
support such flows. Need to account for source vport that sends the
traffic (on which the representors resides) and the target eswitch
the traffic which reach.
Signed-off-by: NMark Bloch <mbloch@nvidia.com>
Reviewed-by: NMark Zhang <markzhang@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

In shared FDB a single RDMA device can have representors that are
connected to two different eswitches. Use the right eswitch when
preparing the response to userspace.
Signed-off-by: NMark Bloch <mbloch@nvidia.com>
Reviewed-by: NMark Zhang <markzhang@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

As shared FDB requires changes in two subsystems first expose the needed
core functions so the RDMA side can be changed.

mlx5_lag_is_master(): return true if a given mlx5 device is the lag master.
mlx5_lag_is_shared_fdb(): Returns true if the lag mode is shared FDB.
mlx5_lag_get_peer_mdev(): Return the peer mdev in lag.

The mentioned functions will be used by downstream patches in order
to add support for shared FDB for the RDMA side.
Signed-off-by: NMark Bloch <mbloch@nvidia.com>
Reviewed-by: NMark Zhang <markzhang@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Export a function so users can retrieve the mellanox device that manages
the eswitch from the eswitch device.
Signed-off-by: NMark Bloch <mbloch@nvidia.com>
Reviewed-by: NMark Zhang <markzhang@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

Unify create QP creation interface to make clean approach to create
XRC_TGT and regular QPs.

Link: https://lore.kernel.org/r/5cd50e7d8ad9112545a1a61dea62799a5cb3224a.1628014762.git.leonro@nvidia.comSigned-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The QP usecnts were incremented through QP attributes structure while
decreased through QP itself. Rely on the ib_creat_qp_user() code that
initialized all QP parameters prior returning to the user and increment
exactly like destroy does.

Link: https://lore.kernel.org/r/25d256a3bb1fc480b77d7fe439817b993de48610.1628014762.git.leonro@nvidia.comSigned-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

All QP creation flows called ib_create_qp_security(), but differently.
This caused to the need to provide exclusion conditions for the XRC_TGT,
because such QP already had selinux configuration call.

In order to fix it, move ib_create_qp_security() to the general QP
creation routine.

Link: https://lore.kernel.org/r/4d7cd6f5828aca37fb62283e6b126b73ab86b18c.1628014762.git.leonro@nvidia.comSigned-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The low-level create QP function grew to be larger than any sensible
inline function should be. The inline attribute is not really needed for
that function and can be implemented as exported symbol.

Link: https://lore.kernel.org/r/2c08709d86f876c3dfb77684357b2a939e570ca4.1628014762.git.leonro@nvidia.comSigned-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The ib_create_named_qp() is kernel verb that is not used for user supplied
attributes. In such case, it is ULP responsibility to provide valid QP
attributes.

In-kernel API shouldn't check it, exactly like other functions that don't
check device capabilities.

Link: https://lore.kernel.org/r/b9b9e981d1af148b750750196e686199dbbf61f8.1628014762.git.leonro@nvidia.comSigned-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The ib_create_named_qp() is kernel verb and no kernel users exist that use
XRC_INI QP. Hence such QP path is not reachable. In addition, delete
duplicated assignments of QP attributes from the initialization structure.

Link: https://lore.kernel.org/r/1b4c0d1def5f8f6d26839e14d19da950cc4a0b05.1628014762.git.leonro@nvidia.comSigned-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

XRC_TGT QPs are created through kernel verbs and don't have udata at all.

Fixes: 6eefa839 ("RDMA/mlx5: Protect from kernel crash if XRC_TGT doesn't have udata")
Fixes: e383085c ("RDMA/mlx5: Set ECE options during QP create")
Link: https://lore.kernel.org/r/b68228597e730675020aa5162745390a2d39d3a2.1628014762.git.leonro@nvidia.comSigned-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

There is no real value in bypassing IB/core APIs for creating standard
objects with standard types. The open-coded variant didn't have any
restrack task management calls and caused to such objects to be not
present when running rdmatoool.

Link: https://lore.kernel.org/r/f745590e5fb7d56f90fdb25f64ee3983ba17e1e4.1627040189.git.leonro@nvidia.comSigned-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Convert QP object to follow IB/core general allocation scheme.  That
change allows us to make sure that restrack properly kref the memory.

Link: https://lore.kernel.org/r/48e767124758aeecc433360ddd85eaa6325b34d9.1627040189.git.leonro@nvidia.com
Reviewed-by: Gal Pressman <galpress@amazon.com> #efa
Tested-by: NGal Pressman <galpress@amazon.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> #rdma and core
Tested-by: NDennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Tested-by: NTatyana Nikolova <tatyana.e.nikolova@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

The rdmavt QP has fields that are both needed for the control and data
path. Such mixed declaration caused to the very specific allocation flow
with kzalloc_node and SGE list embedded into the struct rvt_qp.

This patch separates QP creation to two: regular memory allocation for the
control path and specific code for the SGE list, while the access to the
later is performed through derefenced pointer.

Such pointer and its context are expected to be in the cache, so
performance difference is expected to be negligible, if any exists.

Link: https://lore.kernel.org/r/f66c1e20ccefba0db3c69c58ca9c897f062b4d1c.1627040189.git.leonro@nvidia.comSigned-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>

Starting from commit 2b1f7470 ("RDMA/core: Allow drivers to disable
restrack DB") the restrack is able to handle non-standard QP types either.

That change allows us to rewrite custom QP calls to their IB/core
counterparts, so we will use general QP creation flow even for the driver
QP types.

Link: https://lore.kernel.org/r/51682ab82298748941f38bd23ee3bf77ef1cab7b.1627040189.git.leonro@nvidia.comSigned-off-by: NLeon Romanovsky <leonro@nvidia.com>
Signed-off-by: NJason Gunthorpe <jgg@nvidia.com>