Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 09 8月, 2016 2 次提交
    • L
      unsafe_[get|put]_user: change interface to use a error target label · 1bd4403d
      由 Linus Torvalds 提交于 
      When I initially added the unsafe_[get|put]_user() helpers in commit
5b24a7a2 ("Add 'unsafe' user access functions for batched
accesses"), I made the mistake of modeling the interface on our
traditional __[get|put]_user() functions, which return zero on success,
or -EFAULT on failure.

That interface is fairly easy to use, but it's actually fairly nasty for
good code generation, since it essentially forces the caller to check
the error value for each access.

In particular, since the error handling is already internally
implemented with an exception handler, and we already use "asm goto" for
various other things, we could fairly easily make the error cases just
jump directly to an error label instead, and avoid the need for explicit
checking after each operation.

So switch the interface to pass in an error label, rather than checking
the error value in the caller.  Best do it now before we start growing
more users (the signal handling code in particular would be a good place
to use the new interface).

So rather than

	if (unsafe_get_user(x, ptr))
		... handle error ..

the interface is now

	unsafe_get_user(x, ptr, label);

where an error during the user mode fetch will now just cause a jump to
'label' in the caller.

Right now the actual _implementation_ of this all still ends up being a
"if (err) goto label", and does not take advantage of any exception
label tricks, but for "unsafe_put_user()" in particular it should be
fairly straightforward to convert to using the exception table model.

Note that "unsafe_get_user()" is much harder to convert to a clever
exception table model, because current versions of gcc do not allow the
use of "asm goto" (for the exception) with output values (for the actual
value to be fetched).  But that is hopefully not a limitation in the
long term.

[ Also note that it might be a good idea to switch unsafe_get_user() to
  actually _return_ the value it fetches from user space, but this
  commit only changes the error handling semantics ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      1bd4403d
    • V
      x86/hweight: Don't clobber %rdi · 65ea11ec
      由 Ville Syrjälä 提交于 
      The caller expects %rdi to remain intact, push+pop it make that happen.

Fixes the following kind of explosions on my core2duo machine when
trying to reboot or shut down:

  general protection fault: 0000 [#1] PREEMPT SMP
  Modules linked in: i915 i2c_algo_bit drm_kms_helper cfbfillrect syscopyarea cfbimgblt sysfillrect sysimgblt fb_sys_fops cfbcopyarea drm netconsole configfs binfmt_misc iTCO_wdt psmouse pcspkr snd_hda_codec_idt e100 coretemp hwmon snd_hda_codec_generic i2c_i801 mii i2c_smbus lpc_ich mfd_core snd_hda_intel uhci_hcd snd_hda_codec snd_hwdep snd_hda_core ehci_pci 8250 ehci_hcd snd_pcm 8250_base usbcore evdev serial_core usb_common parport_pc parport snd_timer snd soundcore
  CPU: 0 PID: 3070 Comm: reboot Not tainted 4.8.0-rc1-perf-dirty #69
  Hardware name:                  /D946GZIS, BIOS TS94610J.86A.0087.2007.1107.1049 11/07/2007
  task: ffff88012a0b4080 task.stack: ffff880123850000
  RIP: 0010:[<ffffffff81003c92>]  [<ffffffff81003c92>] x86_perf_event_update+0x52/0xc0
  RSP: 0018:ffff880123853b60  EFLAGS: 00010087
  RAX: 0000000000000001 RBX: ffff88012fc0a3c0 RCX: 000000000000001e
  RDX: 0000000000000000 RSI: 0000000040000000 RDI: ffff88012b014800
  RBP: ffff880123853b88 R08: ffffffffffffffff R09: 0000000000000000
  R10: ffffea0004a012c0 R11: ffffea0004acedc0 R12: ffffffff80000001
  R13: ffff88012b0149c0 R14: ffff88012b014800 R15: 0000000000000018
  FS:  00007f8b155cd700(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f8b155f5000 CR3: 000000012a2d7000 CR4: 00000000000006f0
  Stack:
   ffff88012fc0a3c0 ffff88012b014800 0000000000000004 0000000000000001
   ffff88012fc1b750 ffff880123853bb0 ffffffff81003d59 ffff88012b014800
   ffff88012fc0a3c0 ffff88012b014800 ffff880123853bd8 ffffffff81003e13
  Call Trace:
   [<ffffffff81003d59>] x86_pmu_stop+0x59/0xd0
   [<ffffffff81003e13>] x86_pmu_del+0x43/0x140
   [<ffffffff8111705d>] event_sched_out.isra.105+0xbd/0x260
   [<ffffffff8111738d>] __perf_remove_from_context+0x2d/0xb0
   [<ffffffff8111745d>] __perf_event_exit_context+0x4d/0x70
   [<ffffffff810c8826>] generic_exec_single+0xb6/0x140
   [<ffffffff81117410>] ? __perf_remove_from_context+0xb0/0xb0
   [<ffffffff81117410>] ? __perf_remove_from_context+0xb0/0xb0
   [<ffffffff810c898f>] smp_call_function_single+0xdf/0x140
   [<ffffffff81113d27>] perf_event_exit_cpu_context+0x87/0xc0
   [<ffffffff81113d73>] perf_reboot+0x13/0x40
   [<ffffffff8107578a>] notifier_call_chain+0x4a/0x70
   [<ffffffff81075ad7>] __blocking_notifier_call_chain+0x47/0x60
   [<ffffffff81075b06>] blocking_notifier_call_chain+0x16/0x20
   [<ffffffff81076a1d>] kernel_restart_prepare+0x1d/0x40
   [<ffffffff81076ae2>] kernel_restart+0x12/0x60
   [<ffffffff81076d56>] SYSC_reboot+0xf6/0x1b0
   [<ffffffff811a823c>] ? mntput_no_expire+0x2c/0x1b0
   [<ffffffff811a83e4>] ? mntput+0x24/0x40
   [<ffffffff811894fc>] ? __fput+0x16c/0x1e0
   [<ffffffff811895ae>] ? ____fput+0xe/0x10
   [<ffffffff81072fc3>] ? task_work_run+0x83/0xa0
   [<ffffffff81001623>] ? exit_to_usermode_loop+0x53/0xc0
   [<ffffffff8100105a>] ? trace_hardirqs_on_thunk+0x1a/0x1c
   [<ffffffff81076e6e>] SyS_reboot+0xe/0x10
   [<ffffffff814c4ba5>] entry_SYSCALL_64_fastpath+0x18/0xa3
  Code: 7c 4c 8d af c0 01 00 00 49 89 fe eb 10 48 09 c2 4c 89 e0 49 0f b1 55 00 4c 39 e0 74 35 4d 8b a6 c0 01 00 00 41 8b 8e 60 01 00 00 <0f> 33 8b 35 6e 02 8c 00 48 c1 e2 20 85 f6 7e d2 48 89 d3 89 cf
  RIP  [<ffffffff81003c92>] x86_perf_event_update+0x52/0xc0
   RSP <ffff880123853b60>
  ---[ end trace 7ec95181faf211be ]---
  note: reboot[3070] exited with preempt_count 2

Cc: Borislav Petkov <bp@suse.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Fixes: f5967101 ("x86/hweight: Get rid of the special calling convention")
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      65ea11ec
  3. 04 8月, 2016 8 次提交
    • K
      dma-mapping: use unsigned long for dma_attrs · 00085f1e
      由 Krzysztof Kozlowski 提交于 
      The dma-mapping core and the implementations do not change the DMA
attributes passed by pointer.  Thus the pointer can point to const data.
However the attributes do not have to be a bitfield.  Instead unsigned
long will do fine:

1. This is just simpler.  Both in terms of reading the code and setting
   attributes.  Instead of initializing local attributes on the stack
   and passing pointer to it to dma_set_attr(), just set the bits.

2. It brings safeness and checking for const correctness because the
   attributes are passed by value.

Semantic patches for this change (at least most of them):

    virtual patch
    virtual context

    @r@
    identifier f, attrs;

    @@
    f(...,
    - struct dma_attrs *attrs
    + unsigned long attrs
    , ...)
    {
    ...
    }

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

and

    // Options: --all-includes
    virtual patch
    virtual context

    @r@
    identifier f, attrs;
    type t;

    @@
    t f(..., struct dma_attrs *attrs);

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.comSigned-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NVineet Gupta <vgupta@synopsys.com>
Acked-by: NRobin Murphy <robin.murphy@arm.com>
Acked-by: NHans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Acked-by: Mark Salter <msalter@redhat.com> [c6x]
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris]
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm]
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp]
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core]
Acked-by: David Vrabel <david.vrabel@citrix.com> [xen]
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb]
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32]
Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc]
Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      00085f1e
    • M
      tree-wide: replace config_enabled() with IS_ENABLED() · 97f2645f
      由 Masahiro Yamada 提交于 
      The use of config_enabled() against config options is ambiguous.  In
practical terms, config_enabled() is equivalent to IS_BUILTIN(), but the
author might have used it for the meaning of IS_ENABLED().  Using
IS_ENABLED(), IS_BUILTIN(), IS_MODULE() etc.  makes the intention
clearer.

This commit replaces config_enabled() with IS_ENABLED() where possible.
This commit is only touching bool config options.

I noticed two cases where config_enabled() is used against a tristate
option:

 - config_enabled(CONFIG_HWMON)
  [ drivers/net/wireless/ath/ath10k/thermal.c ]

 - config_enabled(CONFIG_BACKLIGHT_CLASS_DEVICE)
  [ drivers/gpu/drm/gma500/opregion.c ]

I did not touch them because they should be converted to IS_BUILTIN()
in order to keep the logic, but I was not sure it was the authors'
intention.

Link: http://lkml.kernel.org/r/1465215656-20569-1-git-send-email-yamada.masahiro@socionext.comSigned-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Stas Sergeev <stsp@list.ru>
Cc: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Markos Chandras <markos.chandras@imgtec.com>
Cc: "Dmitry V. Levin" <ldv@altlinux.org>
Cc: yu-cheng yu <yu-cheng.yu@intel.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Will Drewry <wad@chromium.org>
Cc: Nikolay Martynov <mar.kolya@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: Rafal Milecki <zajec5@gmail.com>
Cc: James Cowgill <James.Cowgill@imgtec.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Adam Buchbinder <adam.buchbinder@gmail.com>
Cc: Qais Yousef <qais.yousef@imgtec.com>
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Mikko Rapeli <mikko.rapeli@iki.fi>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: "Luis R. Rodriguez" <mcgrof@do-not-panic.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Roland McGrath <roland@hack.frob.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: Tony Wu <tung7970@gmail.com>
Cc: Huaitong Han <huaitong.han@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Rabin Vincent <rabin@rab.in>
Cc: "Maciej W. Rozycki" <macro@imgtec.com>
Cc: David Daney <david.daney@cavium.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      97f2645f
    • B
      nvmx: mark ept single context invalidation as supported · 45e11817
      由 Bandan Das 提交于 
      Commit 4b855078 ("KVM: nVMX: Don't advertise single
context invalidation for invept") removed advertising
single context invalidation since the spec does not mandate it.
However, some hypervisors (such as ESX) require it to be present
before willing to use ept in a nested environment. Advertise it
and fallback to the global case.
Signed-off-by: NBandan Das <bsd@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      45e11817
    • B
      nvmx: remove comment about missing nested vpid support · 03331b4b
      由 Bandan Das 提交于 
      Nested vpid is already supported and both single/global
modes are advertised to the guest
Signed-off-by: NBandan Das <bsd@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      03331b4b
    • W
      KVM: lapic: fix access preemption timer stuff even if kernel_irqchip=off · 91005300
      由 Wanpeng Li 提交于 
      BUG: unable to handle kernel NULL pointer dereference at 000000000000008c
IP: [<ffffffffc04e0180>] kvm_lapic_hv_timer_in_use+0x10/0x20 [kvm]
PGD 0
Oops: 0000 [#1] SMP
Call Trace:
 kvm_arch_vcpu_load+0x86/0x260 [kvm]
 vcpu_load+0x46/0x60 [kvm]
 kvm_vcpu_ioctl+0x79/0x7c0 [kvm]
 ? __lock_is_held+0x54/0x70
 do_vfs_ioctl+0x96/0x6a0
 ? __fget_light+0x2a/0x90
 SyS_ioctl+0x79/0x90
 do_syscall_64+0x7c/0x1e0
 entry_SYSCALL64_slow_path+0x25/0x25
RIP  [<ffffffffc04e0180>] kvm_lapic_hv_timer_in_use+0x10/0x20 [kvm]
 RSP <ffff8800db1f3d70>
CR2: 000000000000008c
---[ end trace a55fb79d2b3b4ee8 ]---

This can be reproduced steadily by kernel_irqchip=off.

We should not access preemption timer stuff if lapic is emulated in userspace.
This patch fix it by avoiding access preemption timer stuff when kernel_irqchip=off.

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Yunhong Jiang <yunhong.jiang@intel.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      91005300
    • P
      x86: vdso: use __pvclock_read_cycles · abe9efa7
      由 Paolo Bonzini 提交于 
      The new simplified __pvclock_read_cycles does the same computation
as vread_pvclock, except that (because it takes the pvclock_vcpu_time_info
pointer) it has to be moved inside the loop.  Since the loop is expected to
never roll, this makes no difference.
Acked-by: NAndy Lutomirski <luto@kernel.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      abe9efa7
    • P
      pvclock: introduce seqcount-like API · 3aed64f6
      由 Paolo Bonzini 提交于 
      The version field in struct pvclock_vcpu_time_info basically implements
a seqcount.  Wrap it with the usual read_begin and read_retry functions,
and use these APIs instead of peppering the code with smp_rmb()s.
While at it, change it to the more pedantically correct virt_rmb().

With this change, __pvclock_read_cycles can be simplified noticeably.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      3aed64f6
    • V
      um: Support kcov · 915eed20
      由 Vegard Nossum 提交于 
      This adds support for kcov to UML.

There is a small problem where UML will randomly segfault during boot;
this is because current_thread_info() occasionally returns an invalid
(non-NULL) pointer and we try to dereference it in
__sanitizer_cov_trace_pc(). I consider this a bug in UML itself and this
patch merely exposes it.

[v2: disable instrumentation in UML-specific code]

Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Thomas Meyer <thomas@m3y3r.de>
Cc: user-mode-linux-devel <user-mode-linux-devel@lists.sourceforge.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NVegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>
      915eed20
  5. 03 8月, 2016 4 次提交
  7. 01 8月, 2016 4 次提交
    • J
      KVM: VMX: Add VMCS to CPU's loaded VMCSs before VMPTRLD · b80c76ec
      由 Jim Mattson 提交于 
      Kexec needs to know the addresses of all VMCSs that are active on
each CPU, so that it can flush them from the VMCS caches. It is
safe to record superfluous addresses that are not associated with
an active VMCS, but it is not safe to omit an address associated
with an active VMCS.

After a call to vmcs_load, the VMCS that was loaded is active on
the CPU. The VMCS should be added to the CPU's list of active
VMCSs before it is loaded.
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
      b80c76ec
    • D
      kvm: x86: nVMX: maintain internal copy of current VMCS · 4f2777bc
      由 David Matlack 提交于 
      KVM maintains L1's current VMCS in guest memory, at the guest physical
page identified by the argument to VMPTRLD. This makes hairy
time-of-check to time-of-use bugs possible,as VCPUs can be writing
the the VMCS page in memory while KVM is emulating VMLAUNCH and
VMRESUME.

The spec documents that writing to the VMCS page while it is loaded is
"undefined". Therefore it is reasonable to load the entire VMCS into
an internal cache during VMPTRLD and ignore writes to the VMCS page
-- the guest should be using VMREAD and VMWRITE to access the current
VMCS.

To adhere to the spec, KVM should flush the current VMCS during VMPTRLD,
and the target VMCS during VMCLEAR (as given by the operand to VMCLEAR).
Since this implementation of VMCS caching only maintains the the current
VMCS, VMCLEAR will only do a flush if the operand to VMCLEAR is the
current VMCS pointer.

KVM will also flush during VMXOFF, which is not mandated by the spec,
but also not in conflict with the spec.
Signed-off-by: NDavid Matlack <dmatlack@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      4f2777bc
    • J
      perf/x86: Modify error message in virtualized environment · 005bd007
      由 Juergen Gross 提交于 
      It is known that PMU isn't working in some virtualized environments.

Modify the message issued in that case to mention why hardware PMU
isn't usable instead of reporting it to be broken.

As a side effect this will correct a little bug in the error message:
The error message was meant to be either of level err or info
depending on the environment (native or virtualized). As the level is
taken from the format string and not the printed string, specifying
it via %s and a conditional argument didn't work the way intended.
Signed-off-by: NJuergen Gross <jgross@suse.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@kernel.org
Link: http://lkml.kernel.org/r/1470051427-16795-1-git-send-email-jgross@suse.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      005bd007
    • D
      x86/syscalls/64: Add compat_sys_keyctl for 32-bit userspace · f7d66562
      由 David Howells 提交于 
      x86_64 needs to use compat_sys_keyctl for 32-bit userspace rather than
calling sys_keyctl(). The latter will work in a lot of cases, thereby
hiding the issue.
Reported-by: NStephan Mueller <smueller@chronox.de>
Tested-by: NStephan Mueller <smueller@chronox.de>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: keyrings@vger.kernel.org
Cc: linux-security-module@vger.kernel.org
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/146961615805.14395.5581949237156769439.stgit@warthog.procyon.org.ukSigned-off-by: NIngo Molnar <mingo@kernel.org>
      f7d66562
  9. 29 7月, 2016 1 次提交
    • J
      x86/power/64: Fix hibernation return address corruption · 4ce827b4
      由 Josh Poimboeuf 提交于 
      In kernel bug 150021, a kernel panic was reported when restoring a
hibernate image.  Only a picture of the oops was reported, so I can't
paste the whole thing here.  But here are the most interesting parts:

  kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
  BUG: unable to handle kernel paging request at ffff8804615cfd78
  ...
  RIP: ffff8804615cfd78
  RSP: ffff8804615f0000
  RBP: ffff8804615cfdc0
  ...
  Call Trace:
   do_signal+0x23
   exit_to_usermode_loop+0x64
   ...

The RIP is on the same page as RBP, so it apparently started executing
on the stack.

The bug was bisected to commit ef0f3ed5 (x86/asm/power: Create
stack frames in hibernate_asm_64.S), which in retrospect seems quite
dangerous, since that code saves and restores the stack pointer from a
global variable ('saved_context').

There are a lot of moving parts in the hibernate save and restore paths,
so I don't know exactly what caused the panic.  Presumably, a FRAME_END
was executed without the corresponding FRAME_BEGIN, or vice versa.  That
would corrupt the return address on the stack and would be consistent
with the details of the above panic.

[ rjw: One major problem is that by the time the FRAME_BEGIN in
  restore_registers() is executed, the stack pointer value may not
  be valid any more.  Namely, the stack area pointed to by it
  previously may have been overwritten by some image memory contents
  and that page frame may now be used for whatever different purpose
  it had been allocated for before hibernation.  In that case, the
  FRAME_BEGIN will corrupt that memory. ]

Instead of doing the frame pointer save/restore around the bounds of the
affected functions, just do it around the call to swsusp_save().

That has the same effect of ensuring that if swsusp_save() sleeps, the
frame pointers will be correct.  It's also a much more obviously safe
way to do it than the original patch.  And objtool still doesn't report
any warnings.

Fixes: ef0f3ed5 (x86/asm/power: Create stack frames in hibernate_asm_64.S)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=150021
Cc: 4.6+ <stable@vger.kernel.org> # 4.6+
Reported-by: NAndre Reinke <andre.reinke@mailbox.org>
Tested-by: NAndre Reinke <andre.reinke@mailbox.org>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      4ce827b4
  11. 27 7月, 2016 9 次提交
  13. 26 7月, 2016 1 次提交
  15. 25 7月, 2016 7 次提交
  17. 24 7月, 2016 4 次提交
    • A
      x86/mm/cpa: Add missing comment in populate_pdg() · 55920d31
      由 Andy Lutomirski 提交于 
      In commit:

  21cbc2822aa1 ("x86/mm/cpa: Unbreak populate_pgd(): stop trying to deallocate failed PUDs")

I intended to add this comment, but I failed at using git.
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/242baf8612394f4e31216f96d13c4d2e9b90d1b7.1469293159.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      55920d31
    • A
      x86/mm/cpa: Fix populate_pgd(): Stop trying to deallocate failed PUDs · 530dd8d4
      由 Andy Lutomirski 提交于 
      Valdis Kletnieks bisected a boot failure back to this recent commit:

  360cb4d1 ("x86/mm/cpa: In populate_pgd(), don't set the PGD entry until it's populated")

I broke the case where a PUD table got allocated -- populate_pud()
would wander off a pgd_none entry and get lost.  I'm not sure how
this survived my testing.

Fix the original issue in a much simpler way.  The problem
was that, if we allocated a PUD table, failed to populate it, and
freed it, another CPU could potentially keep using the PGD entry we
installed (either by copying it via vmalloc_fault or by speculatively
caching it).  There's a straightforward fix: simply leave the
top-level entry in place if this happens.  This can't waste any
significant amount of memory -- there are at most 256 entries like
this systemwide and, as a practical matter, if we hit this failure
path repeatedly, we're likely to reuse the same page anyway.

For context, this is a reversion with this hunk added in:

	if (ret < 0) {
+		/*
+		 * Leave the PUD page in place in case some other CPU or thread
+		 * already found it, but remove any useless entries we just
+		 * added to it.
+		 */
-		unmap_pgd_range(cpa->pgd, addr,
+		unmap_pud_range(pgd_entry, addr,
			        addr + (cpa->numpages << PAGE_SHIFT));
		return ret;
	}

This effectively open-codes what the now-deleted unmap_pgd_range()
function used to do except that unmap_pgd_range() used to try to
free the page as well.
Reported-by: NValdis Kletnieks <Valdis.Kletnieks@vt.edu>
Signed-off-by: NAndy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Mike Krinkin <krinkin.m.u@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Toshi Kani <toshi.kani@hp.com>
Link: http://lkml.kernel.org/r/21cbc2822aa18aa812c0215f4231dbf5f65afa7f.1469249789.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      530dd8d4
    • D
      x86/insn: remove pcommit · fd1d961d
      由 Dan Williams 提交于 
      The pcommit instruction is being deprecated in favor of either ADR
(asynchronous DRAM refresh: flush-on-power-fail) at the platform level, or
posted-write-queue flush addresses as defined by the ACPI 6.x NFIT (NVDIMM
Firmware Interface Table).

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: x86@kernel.org
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Acked-by: NIngo Molnar <mingo@redhat.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
      fd1d961d
    • D
      Revert "KVM: x86: add pcommit support" · dfa169bb
      由 Dan Williams 提交于 
      This reverts commit 8b3e34e4.

Given the deprecation of the pcommit instruction, the relevant VMX
features and CPUID bits are not going to be rolled into the SDM.  Remove
their usage from KVM.

Cc: Xiao Guangrong <guangrong.xiao@linux.intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
      dfa169bb