In preparation for moving vcpu allocation to common PPC code, add an
explicit, albeit redundant, build-time assert to ensure the vcpu member
is located at offset 0.  The assert is redundant in the sense that
kvmppc_core_vcpu_create_e500() contains a functionally identical assert.
The motiviation for adding the extra assert is to provide visual
confirmation of the correctness of moving vcpu allocation to common
code.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Explicitly free the shared page if kvmppc_mmu_init() fails during
kvmppc_core_vcpu_create(), as the page is freed only in
kvmppc_core_vcpu_free(), which is not reached via kvm_vcpu_uninit().

Fixes: 96bc451a ("KVM: PPC: Introduce shared page")
Cc: stable@vger.kernel.org
Reviewed-by: NGreg Kurz <groug@kaod.org>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Acked-by: NPaul Mackerras <paulus@ozlabs.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Call kvm_vcpu_uninit() if vcore creation fails to avoid leaking any
resources allocated by kvm_vcpu_init(), i.e. the vcpu->run page.

Fixes: 371fefd6 ("KVM: PPC: Allow book3s_hv guests to use SMT processor modes")
Cc: stable@vger.kernel.org
Reviewed-by: NGreg Kurz <groug@kaod.org>
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Acked-by: NPaul Mackerras <paulus@ozlabs.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Commit 22945688 ("KVM: PPC: Book3S HV: Support reset of secure
guest") added a call to uv_svm_terminate, which is an ultravisor
call, without any check that the guest is a secure guest or even that
the system has an ultravisor.  On a system without an ultravisor,
the ultracall will degenerate to a hypercall, but since we are not
in KVM guest context, the hypercall will get treated as a system
call, which could have random effects depending on what happens to
be in r0, and could also corrupt the current task's kernel stack.
Hence this adds a test for the guest being a secure guest before
doing uv_svm_terminate().

Fixes: 22945688 ("KVM: PPC: Book3S HV: Support reset of secure guest")
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

VCPU_CR is the offset of arch.regs.ccr in kvm_vcpu.
arch/powerpc/include/asm/kvm_host.h defines arch.regs as a struct
pt_regs, and arch/powerpc/include/asm/ptrace.h defines the ccr field
of pt_regs as "unsigned long ccr".  Since unsigned long is 64 bits, a
64-bit load needs to be used to load it, unless an endianness specific
correction offset is added to access the desired subpart.  In this
case there is no reason to _not_ use a 64 bit load though.

Fixes: 6c85b7bc ("powerpc/kvm: Use UV_RETURN ucall to return to ultravisor")
Cc: stable@vger.kernel.org # v5.4+
Signed-off-by: NMarcus Comstedt <marcus@mc.pp.se>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191215094900.46740-1-marcus@mc.pp.se

Add support for reset of secure guest via a new ioctl KVM_PPC_SVM_OFF.
This ioctl will be issued by QEMU during reset and includes the
the following steps:

- Release all device pages of the secure guest.
- Ask UV to terminate the guest via UV_SVM_TERMINATE ucall
- Unpin the VPA pages so that they can be migrated back to secure
  side when guest becomes secure again. This is required because
  pinned pages can't be migrated.
- Reinit the partition scoped page tables

After these steps, guest is ready to issue UV_ESM call once again
to switch to secure mode.
Signed-off-by: NBharata B Rao <bharata@linux.ibm.com>
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
	[Implementation of uv_svm_terminate() and its call from
	guest shutdown path]
Signed-off-by: NRam Pai <linuxram@us.ibm.com>
	[Unpinning of VPA pages]
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

Register the new memslot with UV during plug and unregister
the memslot during unplug. In addition, release all the
device pages during unplug.
Signed-off-by: NBharata B Rao <bharata@linux.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

- After the guest becomes secure, when we handle a page fault of a page
  belonging to SVM in HV, send that page to UV via UV_PAGE_IN.
- Whenever a page is unmapped on the HV side, inform UV via UV_PAGE_INVAL.
- Ensure all those routines that walk the secondary page tables of
  the guest don't do so in case of secure VM. For secure guest, the
  active secondary page tables are in secure memory and the secondary
  page tables in HV are freed when guest becomes secure.
Signed-off-by: NBharata B Rao <bharata@linux.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

A secure guest will share some of its pages with hypervisor (Eg. virtio
bounce buffers etc). Support sharing of pages between hypervisor and
ultravisor.

Shared page is reachable via both HV and UV side page tables. Once a
secure page is converted to shared page, the device page that represents
the secure page is unmapped from the HV side page tables.
Signed-off-by: NBharata B Rao <bharata@linux.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

A pseries guest can be run as secure guest on Ultravisor-enabled
POWER platforms. On such platforms, this driver will be used to manage
the movement of guest pages between the normal memory managed by
hypervisor (HV) and secure memory managed by Ultravisor (UV).

HV is informed about the guest's transition to secure mode via hcalls:

H_SVM_INIT_START: Initiate securing a VM
H_SVM_INIT_DONE: Conclude securing a VM

As part of H_SVM_INIT_START, register all existing memslots with
the UV. H_SVM_INIT_DONE call by UV informs HV that transition of
the guest to secure mode is complete.

These two states (transition to secure mode STARTED and transition
to secure mode COMPLETED) are recorded in kvm->arch.secure_guest.
Setting these states will cause the assembly code that enters the
guest to call the UV_RETURN ucall instead of trying to enter the
guest directly.

Migration of pages betwen normal and secure memory of secure
guest is implemented in H_SVM_PAGE_IN and H_SVM_PAGE_OUT hcalls.

H_SVM_PAGE_IN: Move the content of a normal page to secure page
H_SVM_PAGE_OUT: Move the content of a secure page to normal page

Private ZONE_DEVICE memory equal to the amount of secure memory
available in the platform for running secure guests is created.
Whenever a page belonging to the guest becomes secure, a page from
this private device memory is used to represent and track that secure
page on the HV side. The movement of pages between normal and secure
memory is done via migrate_vma_pages() using UV_PAGE_IN and
UV_PAGE_OUT ucalls.

In order to prevent the device private pages (that correspond to pages
of secure guest) from participating in KSM merging, H_SVM_PAGE_IN
calls ksm_madvise() under read version of mmap_sem. However
ksm_madvise() needs to be under write lock.  Hence we call
kvmppc_svm_page_in with mmap_sem held for writing, and it then
downgrades to a read lock after calling ksm_madvise.

[paulus@ozlabs.org - roll in patch "KVM: PPC: Book3S HV: Take write
 mmap_sem when calling ksm_madvise"]
Signed-off-by: NBharata B Rao <bharata@linux.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

We need to check the host page size is big enough to accomodate the
EQ. Let's do this before taking a reference on the EQ page to avoid
a potential leak if the check fails.

Cc: stable@vger.kernel.org # v5.2
Fixes: 13ce3297 ("KVM: PPC: Book3S HV: XIVE: Add controls for the EQ configuration")
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

The EQ page is allocated by the guest and then passed to the hypervisor
with the H_INT_SET_QUEUE_CONFIG hcall. A reference is taken on the page
before handing it over to the HW. This reference is dropped either when
the guest issues the H_INT_RESET hcall or when the KVM device is released.
But, the guest can legitimately call H_INT_SET_QUEUE_CONFIG several times,
either to reset the EQ (vCPU hot unplug) or to set a new EQ (guest reboot).
In both cases the existing EQ page reference is leaked because we simply
overwrite it in the XIVE queue structure without calling put_page().

This is especially visible when the guest memory is backed with huge pages:
start a VM up to the guest userspace, either reboot it or unplug a vCPU,
quit QEMU. The leak is observed by comparing the value of HugePages_Free in
/proc/meminfo before and after the VM is run.

Ideally we'd want the XIVE code to handle the EQ page de-allocation at the
platform level. This isn't the case right now because the various XIVE
drivers have different allocation needs. It could maybe worth introducing
hooks for this purpose instead of exposing XIVE internals to the drivers,
but this is certainly a huge work to be done later.

In the meantime, for easier backport, fix both vCPU unplug and guest reboot
leaks by introducing a wrapper around xive_native_configure_queue() that
does the necessary cleanup.
Reported-by: NSatheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org # v5.2
Fixes: 13ce3297 ("KVM: PPC: Book3S HV: XIVE: Add controls for the EQ configuration")
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NGreg Kurz <groug@kaod.org>
Tested-by: NLijun Pan <ljp@linux.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

On some systems that are vulnerable to Spectre v2, it is up to
software to flush the link stack (return address stack), in order to
protect against Spectre-RSB.

When exiting from a guest we do some house keeping and then
potentially exit to C code which is several stack frames deep in the
host kernel. We will then execute a series of returns without
preceeding calls, opening up the possiblity that the guest could have
poisoned the link stack, and direct speculative execution of the host
to a gadget of some sort.

To prevent this we add a flush of the link stack on exit from a guest.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Add a new helper, kvm_put_kvm_no_destroy(), to handle putting a borrowed
reference[*] to the VM when installing a new file descriptor fails.  KVM
expects the refcount to remain valid in this case, as the in-progress
ioctl() has an explicit reference to the VM.  The primary motiviation
for the helper is to document that the 'kvm' pointer is still valid
after putting the borrowed reference, e.g. to document that doing
mutex(&kvm->lock) immediately after putting a ref to kvm isn't broken.

[*] When exposing a new object to userspace via a file descriptor, e.g.
    a new vcpu, KVM grabs a reference to itself (the VM) prior to making
    the object visible to userspace to avoid prematurely freeing the VM
    in the scenario where userspace immediately closes file descriptor.
Signed-off-by: NSean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

AIL=2 mode has no known users, so is not well tested or supported.
Disallow guests from selecting this mode because it may become
deprecated in future versions of the architecture.

This policy decision is not left to QEMU because KVM support is
required for AIL=2 (when injecting interrupts).
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

kvmppc_inject_interrupt does not implement LPCR[AIL]!=0 modes, which
can result in the guest receiving interrupts as if LPCR[AIL]=0
contrary to the ISA.

In practice, Linux guests cope with this deviation, but it should be
fixed.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

This consolidates the HV interrupt delivery logic into one place.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

reset_msr sets the MSR for interrupt injection, but it's cleaner and
more flexible to provide a single op to set both MSR and PC for the
interrupt.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

Acked-by: NPaul Mackerras <paulus@ozlabs.org>
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

Add a new attribute to both XIVE and XICS-on-XIVE KVM devices so that
userspace can tell how many interrupt servers it needs. If a VM needs
less than the current default of KVM_MAX_VCPUS (2048), we can allocate
less VPs in OPAL. Combined with a core stride (VSMT) that matches the
number of guest threads per core, this may substantially increases the
number of VMs that can run concurrently with an in-kernel XIVE device.

Since the legacy XIVE KVM device is exposed to userspace through the
XICS KVM API, a new attribute group is added to it for this purpose.
While here, fix the syntax of the existing KVM_DEV_XICS_GRP_SOURCES
in the XICS documentation.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

The XIVE VP is an internal structure which allow the XIVE interrupt
controller to maintain the interrupt context state of vCPUs non
dispatched on HW threads.

When a guest is started, the XIVE KVM device allocates a block of
XIVE VPs in OPAL, enough to accommodate the highest possible vCPU
id KVM_MAX_VCPU_ID (16384) packed down to KVM_MAX_VCPUS (2048).
With a guest's core stride of 8 and a threading mode of 1 (QEMU's
default), a VM must run at least 256 vCPUs to actually need such a
range of VPs.

A POWER9 system has a limited XIVE VP space : 512k and KVM is
currently wasting this HW resource with large VP allocations,
especially since a typical VM likely runs with a lot less vCPUs.

Make the size of the VP block configurable. Add an nr_servers
field to the XIVE structure and a function to set it for this
purpose.

Split VP allocation out of the device create function. Since the
VP block isn't used before the first vCPU connects to the XIVE KVM
device, allocation is now performed by kvmppc_xive_connect_vcpu().
This gives the opportunity to set nr_servers in between:

          kvmppc_xive_create() / kvmppc_xive_native_create()
                               .
                               .
                     kvmppc_xive_set_nr_servers()
                               .
                               .
    kvmppc_xive_connect_vcpu() / kvmppc_xive_native_connect_vcpu()

The connect_vcpu() functions check that the vCPU id is below nr_servers
and if it is the first vCPU they allocate the VP block. This is protected
against a concurrent update of nr_servers by kvmppc_xive_set_nr_servers()
with the xive->lock mutex.

Also, the block is allocated once for the device lifetime: nr_servers
should stay constant otherwise connect_vcpu() could generate a boggus
VP id and likely crash OPAL. It is thus forbidden to update nr_servers
once the block is allocated.

If the VP allocation fail, return ENOSPC which seems more appropriate to
report the depletion of system wide HW resource than ENOMEM or ENXIO.

A VM using a stride of 8 and 1 thread per core with 32 vCPUs would hence
only need 256 VPs instead of 2048. If the stride is set to match the number
of threads per core, this goes further down to 32.

This will be exposed to userspace by a subsequent patch.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

Reduce code duplication by consolidating the checking of vCPU ids and VP
ids to a common helper used by both legacy and native XIVE KVM devices.
And explain the magic with a comment.
Signed-off-by: NGreg Kurz <groug@kaod.org>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

Print out the VP id of each connected vCPU, this allow to see:
- the VP block base in which OPAL encodes information that may be
  useful when debugging
- the packed vCPU id which may differ from the raw vCPU id if the
  latter is >= KVM_MAX_VCPUS (2048)
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

If we cannot allocate the XIVE VPs in OPAL, the creation of a XIVE or
XICS-on-XIVE device is aborted as expected, but we leave kvm->arch.xive
set forever since the release method isn't called in this case. Any
subsequent tentative to create a XIVE or XICS-on-XIVE for this VM will
thus always fail (DoS). This is a problem for QEMU since it destroys
and re-creates these devices when the VM is reset: the VM would be
restricted to using the much slower emulated XIVE or XICS forever.

As an alternative to adding rollback, do not assign kvm->arch.xive before
making sure the XIVE VPs are allocated in OPAL.

Cc: stable@vger.kernel.org # v5.2
Fixes: 5422e951 ("KVM: PPC: Book3S HV: XIVE: Replace the 'destroy' method by a 'release' method")
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

Given that in kvm_create_vm() there is:
kvm->mm = current->mm;

And that on every kvm_*_ioctl we have:
if (kvm->mm != current->mm)
	return -EIO;

I see no reason to keep using current->mm instead of kvm->mm.

By doing so, we would reduce the use of 'global' variables on code, relying
more in the contents of kvm struct.
Signed-off-by: NLeonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

Reduces the number of calls to get_current() in order to get the value of
current->mm by doing it once and storing the value, since it is not
supposed to change inside the same process).
Signed-off-by: NLeonardo Bras <leonardo@linux.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

When calling the KVM_SET_GUEST_DEBUG ioctl, userspace might request
the next instruction to be single stepped via the
KVM_GUESTDBG_SINGLESTEP control bit of the kvm_guest_debug structure.

This patch adds the KVM_CAP_PPC_GUEST_DEBUG_SSTEP capability in order
to inform userspace about the state of single stepping support.

We currently don't have support for guest single stepping implemented
in Book3S HV so the capability is only present for Book3S PR and
BookE.
Signed-off-by: NFabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

Connecting a vCPU to a XIVE KVM device means establishing a 1:1
association between a vCPU id and the offset (VP id) of a VP
structure within a fixed size block of VPs. We currently try to
enforce the 1:1 relationship by checking that a vCPU with the
same id isn't already connected. This is good but unfortunately
not enough because we don't map VP ids to raw vCPU ids but to
packed vCPU ids, and the packing function kvmppc_pack_vcpu_id()
isn't bijective by design. We got away with it because QEMU passes
vCPU ids that fit well in the packing pattern. But nothing prevents
userspace to come up with a forged vCPU id resulting in a packed id
collision which causes the KVM device to associate two vCPUs to the
same VP. This greatly confuses the irq layer and ultimately crashes
the kernel, as shown below.

Example: a guest with 1 guest thread per core, a core stride of
8 and 300 vCPUs has vCPU ids 0,8,16...2392. If QEMU is patched to
inject at some point an invalid vCPU id 348, which is the packed
version of itself and 2392, we get:

genirq: Flags mismatch irq 199. 00010000 (kvm-2-2392) vs. 00010000 (kvm-2-348)
CPU: 24 PID: 88176 Comm: qemu-system-ppc Not tainted 5.3.0-xive-nr-servers-5.3-gku+ #38
Call Trace:
[c000003f7f9937e0] [c000000000c0110c] dump_stack+0xb0/0xf4 (unreliable)
[c000003f7f993820] [c0000000001cb480] __setup_irq+0xa70/0xad0
[c000003f7f9938d0] [c0000000001cb75c] request_threaded_irq+0x13c/0x260
[c000003f7f993940] [c00800000d44e7ac] kvmppc_xive_attach_escalation+0x104/0x270 [kvm]
[c000003f7f9939d0] [c00800000d45013c] kvmppc_xive_connect_vcpu+0x424/0x620 [kvm]
[c000003f7f993ac0] [c00800000d444428] kvm_arch_vcpu_ioctl+0x260/0x448 [kvm]
[c000003f7f993b90] [c00800000d43593c] kvm_vcpu_ioctl+0x154/0x7c8 [kvm]
[c000003f7f993d00] [c0000000004840f0] do_vfs_ioctl+0xe0/0xc30
[c000003f7f993db0] [c000000000484d44] ksys_ioctl+0x104/0x120
[c000003f7f993e00] [c000000000484d88] sys_ioctl+0x28/0x80
[c000003f7f993e20] [c00000000000b278] system_call+0x5c/0x68
xive-kvm: Failed to request escalation interrupt for queue 0 of VCPU 2392
------------[ cut here ]------------
remove_proc_entry: removing non-empty directory 'irq/199', leaking at least 'kvm-2-348'
WARNING: CPU: 24 PID: 88176 at /home/greg/Work/linux/kernel-kvm-ppc/fs/proc/generic.c:684 remove_proc_entry+0x1ec/0x200
Modules linked in: kvm_hv kvm dm_mod vhost_net vhost tap xt_CHECKSUM iptable_mangle xt_MASQUERADE iptable_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter squashfs loop fuse i2c_dev sg ofpart ocxl powernv_flash at24 xts mtd uio_pdrv_genirq vmx_crypto opal_prd ipmi_powernv uio ipmi_devintf ipmi_msghandler ibmpowernv ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables ext4 mbcache jbd2 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq libcrc32c raid1 raid0 linear sd_mod ast i2c_algo_bit drm_vram_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ahci libahci libata tg3 drm_panel_orientation_quirks [last unloaded: kvm]
CPU: 24 PID: 88176 Comm: qemu-system-ppc Not tainted 5.3.0-xive-nr-servers-5.3-gku+ #38
NIP:  c00000000053b0cc LR: c00000000053b0c8 CTR: c0000000000ba3b0
REGS: c000003f7f9934b0 TRAP: 0700   Not tainted  (5.3.0-xive-nr-servers-5.3-gku+)
MSR:  9000000000029033 <SF,HV,EE,ME,IR,DR,RI,LE>  CR: 48228222  XER: 20040000
CFAR: c000000000131a50 IRQMASK: 0
GPR00: c00000000053b0c8 c000003f7f993740 c0000000015ec500 0000000000000057
GPR04: 0000000000000001 0000000000000000 000049fb98484262 0000000000001bcf
GPR08: 0000000000000007 0000000000000007 0000000000000001 9000000000001033
GPR12: 0000000000008000 c000003ffffeb800 0000000000000000 000000012f4ce5a1
GPR16: 000000012ef5a0c8 0000000000000000 000000012f113bb0 0000000000000000
GPR20: 000000012f45d918 c000003f863758b0 c000003f86375870 0000000000000006
GPR24: c000003f86375a30 0000000000000007 c0002039373d9020 c0000000014c4a48
GPR28: 0000000000000001 c000003fe62a4f6b c00020394b2e9fab c000003fe62a4ec0
NIP [c00000000053b0cc] remove_proc_entry+0x1ec/0x200
LR [c00000000053b0c8] remove_proc_entry+0x1e8/0x200
Call Trace:
[c000003f7f993740] [c00000000053b0c8] remove_proc_entry+0x1e8/0x200 (unreliable)
[c000003f7f9937e0] [c0000000001d3654] unregister_irq_proc+0x114/0x150
[c000003f7f993880] [c0000000001c6284] free_desc+0x54/0xb0
[c000003f7f9938c0] [c0000000001c65ec] irq_free_descs+0xac/0x100
[c000003f7f993910] [c0000000001d1ff8] irq_dispose_mapping+0x68/0x80
[c000003f7f993940] [c00800000d44e8a4] kvmppc_xive_attach_escalation+0x1fc/0x270 [kvm]
[c000003f7f9939d0] [c00800000d45013c] kvmppc_xive_connect_vcpu+0x424/0x620 [kvm]
[c000003f7f993ac0] [c00800000d444428] kvm_arch_vcpu_ioctl+0x260/0x448 [kvm]
[c000003f7f993b90] [c00800000d43593c] kvm_vcpu_ioctl+0x154/0x7c8 [kvm]
[c000003f7f993d00] [c0000000004840f0] do_vfs_ioctl+0xe0/0xc30
[c000003f7f993db0] [c000000000484d44] ksys_ioctl+0x104/0x120
[c000003f7f993e00] [c000000000484d88] sys_ioctl+0x28/0x80
[c000003f7f993e20] [c00000000000b278] system_call+0x5c/0x68
Instruction dump:
2c230000 41820008 3923ff78 e8e900a0 3c82ff69 3c62ff8d 7fa6eb78 7fc5f378
3884f080 3863b948 4bbf6925 60000000 <0fe00000> 4bffff7c fba10088 4bbf6e41
---[ end trace b925b67a74a1d8d1 ]---
BUG: Kernel NULL pointer dereference at 0x00000010
Faulting instruction address: 0xc00800000d44fc04
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Radix MMU=Hash SMP NR_CPUS=2048 NUMA PowerNV
Modules linked in: kvm_hv kvm dm_mod vhost_net vhost tap xt_CHECKSUM iptable_mangle xt_MASQUERADE iptable_nat nf_nat xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 ipt_REJECT nf_reject_ipv4 tun bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter squashfs loop fuse i2c_dev sg ofpart ocxl powernv_flash at24 xts mtd uio_pdrv_genirq vmx_crypto opal_prd ipmi_powernv uio ipmi_devintf ipmi_msghandler ibmpowernv ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables ext4 mbcache jbd2 raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq libcrc32c raid1 raid0 linear sd_mod ast i2c_algo_bit drm_vram_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ahci libahci libata tg3 drm_panel_orientation_quirks [last unloaded: kvm]
CPU: 24 PID: 88176 Comm: qemu-system-ppc Tainted: G        W         5.3.0-xive-nr-servers-5.3-gku+ #38
NIP:  c00800000d44fc04 LR: c00800000d44fc00 CTR: c0000000001cd970
REGS: c000003f7f9938e0 TRAP: 0300   Tainted: G        W          (5.3.0-xive-nr-servers-5.3-gku+)
MSR:  9000000000009033 <SF,HV,EE,ME,IR,DR,RI,LE>  CR: 24228882  XER: 20040000
CFAR: c0000000001cd9ac DAR: 0000000000000010 DSISR: 40000000 IRQMASK: 0
GPR00: c00800000d44fc00 c000003f7f993b70 c00800000d468300 0000000000000000
GPR04: 00000000000000c7 0000000000000000 0000000000000000 c000003ffacd06d8
GPR08: 0000000000000000 c000003ffacd0738 0000000000000000 fffffffffffffffd
GPR12: 0000000000000040 c000003ffffeb800 0000000000000000 000000012f4ce5a1
GPR16: 000000012ef5a0c8 0000000000000000 000000012f113bb0 0000000000000000
GPR20: 000000012f45d918 00007ffffe0d9a80 000000012f4f5df0 000000012ef8c9f8
GPR24: 0000000000000001 0000000000000000 c000003fe4501ed0 c000003f8b1d0000
GPR28: c0000033314689c0 c000003fe4501c00 c000003fe4501e70 c000003fe4501e90
NIP [c00800000d44fc04] kvmppc_xive_cleanup_vcpu+0xfc/0x210 [kvm]
LR [c00800000d44fc00] kvmppc_xive_cleanup_vcpu+0xf8/0x210 [kvm]
Call Trace:
[c000003f7f993b70] [c00800000d44fc00] kvmppc_xive_cleanup_vcpu+0xf8/0x210 [kvm] (unreliable)
[c000003f7f993bd0] [c00800000d450bd4] kvmppc_xive_release+0xdc/0x1b0 [kvm]
[c000003f7f993c30] [c00800000d436a98] kvm_device_release+0xb0/0x110 [kvm]
[c000003f7f993c70] [c00000000046730c] __fput+0xec/0x320
[c000003f7f993cd0] [c000000000164ae0] task_work_run+0x150/0x1c0
[c000003f7f993d30] [c000000000025034] do_notify_resume+0x304/0x440
[c000003f7f993e20] [c00000000000dcc4] ret_from_except_lite+0x70/0x74
Instruction dump:
3bff0008 7fbfd040 419e0054 847e0004 2fa30000 419effec e93d0000 8929203c
2f890000 419effb8 4800821d e8410018 <e9230010> e9490008 9b2a0039 7c0004ac
---[ end trace b925b67a74a1d8d2 ]---

Kernel panic - not syncing: Fatal exception

This affects both XIVE and XICS-on-XIVE devices since the beginning.

Check the VP id instead of the vCPU id when a new vCPU is connected.
The allocation of the XIVE CPU structure in kvmppc_xive_connect_vcpu()
is moved after the check to avoid the need for rollback.

Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: NGreg Kurz <groug@kaod.org>
Reviewed-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

kvmhv_switch_to_host() in arch/powerpc/kvm/book3s_hv_rmhandlers.S
needs to set kvmppc_vcore->in_guest to 0 to signal secondary CPUs to
continue. This happens after resetting the PCR. Before commit
13c7bb3c ("powerpc/64s: Set reserved PCR bits"), r0 would always
be 0 before it was stored to kvmppc_vcore->in_guest. However because
of this change in the commit:

          /* Reset PCR */
          ld      r0, VCORE_PCR(r5)
  -       cmpdi   r0, 0
  +       LOAD_REG_IMMEDIATE(r6, PCR_MASK)
  +       cmpld   r0, r6
          beq     18f
  -       li      r0, 0
  -       mtspr   SPRN_PCR, r0
  +       mtspr   SPRN_PCR, r6
   18:
          /* Signal secondary CPUs to continue */
          stb     r0,VCORE_IN_GUEST(r5)

We are no longer comparing r0 against 0 and loading it with 0 if it
contains something else. Hence when we store r0 to
kvmppc_vcore->in_guest, it might not be 0. This means that secondary
CPUs will not be signalled to continue. Those CPUs get stuck and
errors like the following are logged:

    KVM: CPU 1 seems to be stuck
    KVM: CPU 2 seems to be stuck
    KVM: CPU 3 seems to be stuck
    KVM: CPU 4 seems to be stuck
    KVM: CPU 5 seems to be stuck
    KVM: CPU 6 seems to be stuck
    KVM: CPU 7 seems to be stuck

This can be reproduced with:
    $ for i in `seq 1 7` ; do chcpu -d $i ; done ;
    $ taskset -c 0 qemu-system-ppc64 -smp 8,threads=8 \
       -M pseries,accel=kvm,kvm-type=HV -m 1G -nographic -vga none \
       -kernel vmlinux -initrd initrd.cpio.xz

Fix by making sure r0 is 0 before storing it to
kvmppc_vcore->in_guest.

Fixes: 13c7bb3c ("powerpc/64s: Set reserved PCR bits")
Reported-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NJordan Niethe <jniethe5@gmail.com>
Reviewed-by: NAlistair Popple <alistair@popple.id.au>
Tested-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20191004025317.19340-1-jniethe5@gmail.com

The largepages debugfs entry is incremented/decremented as shadow
pages are created or destroyed.  Clearing it will result in an
underflow, which is harmless to KVM but ugly (and could be
misinterpreted by tools that use debugfs information), so make
this particular statistic read-only.

Cc: kvm-ppc@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

On POWER9, under some circumstances, a broadcast TLB invalidation will
fail to invalidate the ERAT cache on some threads when there are
parallel mtpidr/mtlpidr happening on other threads of the same core.
This can cause stores to continue to go to a page after it's unmapped.

The workaround is to force an ERAT flush using PID=0 or LPID=0 tlbie
flush. This additional TLB flush will cause the ERAT cache
invalidation. Since we are using PID=0 or LPID=0, we don't get
filtered out by the TLB snoop filtering logic.

We need to still follow this up with another tlbie to take care of
store vs tlbie ordering issue explained in commit:
a5d4b589 ("powerpc/mm: Fixup tlbie vs store ordering issue on
POWER9"). The presence of ERAT cache implies we can still get new
stores and they may miss store queue marking flush.

Cc: stable@vger.kernel.org
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190924035254.24612-3-aneesh.kumar@linux.ibm.com

Rename the #define to indicate this is related to store vs tlbie
ordering issue. In the next patch, we will be adding another feature
flag that is used to handles ERAT flush vs tlbie ordering issue.

Fixes: a5d4b589 ("powerpc/mm: Fixup tlbie vs store ordering issue on POWER9")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190924035254.24612-2-aneesh.kumar@linux.ibm.com

On a 2-socket Power9 system with 32 cores/128 threads (SMT4) and 1TB
of memory running the following guest configs:

  guest A:
    - 224GB of memory
    - 56 VCPUs (sockets=1,cores=28,threads=2), where:
      VCPUs 0-1 are pinned to CPUs 0-3,
      VCPUs 2-3 are pinned to CPUs 4-7,
      ...
      VCPUs 54-55 are pinned to CPUs 108-111

  guest B:
    - 4GB of memory
    - 4 VCPUs (sockets=1,cores=4,threads=1)

with the following workloads (with KSM and THP enabled in all):

  guest A:
    stress --cpu 40 --io 20 --vm 20 --vm-bytes 512M

  guest B:
    stress --cpu 4 --io 4 --vm 4 --vm-bytes 512M

  host:
    stress --cpu 4 --io 4 --vm 2 --vm-bytes 256M

the below soft-lockup traces were observed after an hour or so and
persisted until the host was reset (this was found to be reliably
reproducible for this configuration, for kernels 4.15, 4.18, 5.0,
and 5.3-rc5):

  [ 1253.183290] rcu: INFO: rcu_sched self-detected stall on CPU
  [ 1253.183319] rcu:     124-....: (5250 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=1941
  [ 1256.287426] watchdog: BUG: soft lockup - CPU#105 stuck for 23s! [CPU 52/KVM:19709]
  [ 1264.075773] watchdog: BUG: soft lockup - CPU#24 stuck for 23s! [worker:19913]
  [ 1264.079769] watchdog: BUG: soft lockup - CPU#31 stuck for 23s! [worker:20331]
  [ 1264.095770] watchdog: BUG: soft lockup - CPU#45 stuck for 23s! [worker:20338]
  [ 1264.131773] watchdog: BUG: soft lockup - CPU#64 stuck for 23s! [avocado:19525]
  [ 1280.408480] watchdog: BUG: soft lockup - CPU#124 stuck for 22s! [ksmd:791]
  [ 1316.198012] rcu: INFO: rcu_sched self-detected stall on CPU
  [ 1316.198032] rcu:     124-....: (21003 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=8243
  [ 1340.411024] watchdog: BUG: soft lockup - CPU#124 stuck for 22s! [ksmd:791]
  [ 1379.212609] rcu: INFO: rcu_sched self-detected stall on CPU
  [ 1379.212629] rcu:     124-....: (36756 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=14714
  [ 1404.413615] watchdog: BUG: soft lockup - CPU#124 stuck for 22s! [ksmd:791]
  [ 1442.227095] rcu: INFO: rcu_sched self-detected stall on CPU
  [ 1442.227115] rcu:     124-....: (52509 ticks this GP) idle=10a/1/0x4000000000000002 softirq=5408/5408 fqs=21403
  [ 1455.111787] INFO: task worker:19907 blocked for more than 120 seconds.
  [ 1455.111822]       Tainted: G             L    5.3.0-rc5-mdr-vanilla+ #1
  [ 1455.111833] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [ 1455.111884] INFO: task worker:19908 blocked for more than 120 seconds.
  [ 1455.111905]       Tainted: G             L    5.3.0-rc5-mdr-vanilla+ #1
  [ 1455.111925] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [ 1455.111966] INFO: task worker:20328 blocked for more than 120 seconds.
  [ 1455.111986]       Tainted: G             L    5.3.0-rc5-mdr-vanilla+ #1
  [ 1455.111998] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [ 1455.112048] INFO: task worker:20330 blocked for more than 120 seconds.
  [ 1455.112068]       Tainted: G             L    5.3.0-rc5-mdr-vanilla+ #1
  [ 1455.112097] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [ 1455.112138] INFO: task worker:20332 blocked for more than 120 seconds.
  [ 1455.112159]       Tainted: G             L    5.3.0-rc5-mdr-vanilla+ #1
  [ 1455.112179] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [ 1455.112210] INFO: task worker:20333 blocked for more than 120 seconds.
  [ 1455.112231]       Tainted: G             L    5.3.0-rc5-mdr-vanilla+ #1
  [ 1455.112242] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [ 1455.112282] INFO: task worker:20335 blocked for more than 120 seconds.
  [ 1455.112303]       Tainted: G             L    5.3.0-rc5-mdr-vanilla+ #1
  [ 1455.112332] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
  [ 1455.112372] INFO: task worker:20336 blocked for more than 120 seconds.
  [ 1455.112392]       Tainted: G             L    5.3.0-rc5-mdr-vanilla+ #1

CPUs 45, 24, and 124 are stuck on spin locks, likely held by
CPUs 105 and 31.

CPUs 105 and 31 are stuck in smp_call_function_many(), waiting on
target CPU 42. For instance:

  # CPU 105 registers (via xmon)
  R00 = c00000000020b20c   R16 = 00007d1bcd800000
  R01 = c00000363eaa7970   R17 = 0000000000000001
  R02 = c0000000019b3a00   R18 = 000000000000006b
  R03 = 000000000000002a   R19 = 00007d537d7aecf0
  R04 = 000000000000002a   R20 = 60000000000000e0
  R05 = 000000000000002a   R21 = 0801000000000080
  R06 = c0002073fb0caa08   R22 = 0000000000000d60
  R07 = c0000000019ddd78   R23 = 0000000000000001
  R08 = 000000000000002a   R24 = c00000000147a700
  R09 = 0000000000000001   R25 = c0002073fb0ca908
  R10 = c000008ffeb4e660   R26 = 0000000000000000
  R11 = c0002073fb0ca900   R27 = c0000000019e2464
  R12 = c000000000050790   R28 = c0000000000812b0
  R13 = c000207fff623e00   R29 = c0002073fb0ca808
  R14 = 00007d1bbee00000   R30 = c0002073fb0ca800
  R15 = 00007d1bcd600000   R31 = 0000000000000800
  pc  = c00000000020b260 smp_call_function_many+0x3d0/0x460
  cfar= c00000000020b270 smp_call_function_many+0x3e0/0x460
  lr  = c00000000020b20c smp_call_function_many+0x37c/0x460
  msr = 900000010288b033   cr  = 44024824
  ctr = c000000000050790   xer = 0000000000000000   trap =  100

CPU 42 is running normally, doing VCPU work:

  # CPU 42 stack trace (via xmon)
  [link register   ] c00800001be17188 kvmppc_book3s_radix_page_fault+0x90/0x2b0 [kvm_hv]
  [c000008ed3343820] c000008ed3343850 (unreliable)
  [c000008ed33438d0] c00800001be11b6c kvmppc_book3s_hv_page_fault+0x264/0xe30 [kvm_hv]
  [c000008ed33439d0] c00800001be0d7b4 kvmppc_vcpu_run_hv+0x8dc/0xb50 [kvm_hv]
  [c000008ed3343ae0] c00800001c10891c kvmppc_vcpu_run+0x34/0x48 [kvm]
  [c000008ed3343b00] c00800001c10475c kvm_arch_vcpu_ioctl_run+0x244/0x420 [kvm]
  [c000008ed3343b90] c00800001c0f5a78 kvm_vcpu_ioctl+0x470/0x7c8 [kvm]
  [c000008ed3343d00] c000000000475450 do_vfs_ioctl+0xe0/0xc70
  [c000008ed3343db0] c0000000004760e4 ksys_ioctl+0x104/0x120
  [c000008ed3343e00] c000000000476128 sys_ioctl+0x28/0x80
  [c000008ed3343e20] c00000000000b388 system_call+0x5c/0x70
  --- Exception: c00 (System Call) at 00007d545cfd7694
  SP (7d53ff7edf50) is in userspace

It was subsequently found that ipi_message[PPC_MSG_CALL_FUNCTION]
was set for CPU 42 by at least 1 of the CPUs waiting in
smp_call_function_many(), but somehow the corresponding
call_single_queue entries were never processed by CPU 42, causing the
callers to spin in csd_lock_wait() indefinitely.

Nick Piggin suggested something similar to the following sequence as
a possible explanation (interleaving of CALL_FUNCTION/RESCHEDULE
IPI messages seems to be most common, but any mix of CALL_FUNCTION and
!CALL_FUNCTION messages could trigger it):

    CPU
      X: smp_muxed_ipi_set_message():
      X:   smp_mb()
      X:   message[RESCHEDULE] = 1
      X: doorbell_global_ipi(42):
      X:   kvmppc_set_host_ipi(42, 1)
      X:   ppc_msgsnd_sync()/smp_mb()
      X:   ppc_msgsnd() -> 42
     42: doorbell_exception(): // from CPU X
     42:   ppc_msgsync()
    105: smp_muxed_ipi_set_message():
    105:   smb_mb()
         // STORE DEFERRED DUE TO RE-ORDERING
  --105:   message[CALL_FUNCTION] = 1
  | 105: doorbell_global_ipi(42):
  | 105:   kvmppc_set_host_ipi(42, 1)
  |  42:   kvmppc_set_host_ipi(42, 0)
  |  42: smp_ipi_demux_relaxed()
  |  42: // returns to executing guest
  |      // RE-ORDERED STORE COMPLETES
  ->105:   message[CALL_FUNCTION] = 1
    105:   ppc_msgsnd_sync()/smp_mb()
    105:   ppc_msgsnd() -> 42
     42: local_paca->kvm_hstate.host_ipi == 0 // IPI ignored
    105: // hangs waiting on 42 to process messages/call_single_queue

This can be prevented with an smp_mb() at the beginning of
kvmppc_set_host_ipi(), such that stores to message[<type>] (or other
state indicated by the host_ipi flag) are ordered vs. the store to
to host_ipi.

However, doing so might still allow for the following scenario (not
yet observed):

    CPU
      X: smp_muxed_ipi_set_message():
      X:   smp_mb()
      X:   message[RESCHEDULE] = 1
      X: doorbell_global_ipi(42):
      X:   kvmppc_set_host_ipi(42, 1)
      X:   ppc_msgsnd_sync()/smp_mb()
      X:   ppc_msgsnd() -> 42
     42: doorbell_exception(): // from CPU X
     42:   ppc_msgsync()
         // STORE DEFERRED DUE TO RE-ORDERING
  -- 42:   kvmppc_set_host_ipi(42, 0)
  |  42: smp_ipi_demux_relaxed()
  | 105: smp_muxed_ipi_set_message():
  | 105:   smb_mb()
  | 105:   message[CALL_FUNCTION] = 1
  | 105: doorbell_global_ipi(42):
  | 105:   kvmppc_set_host_ipi(42, 1)
  |      // RE-ORDERED STORE COMPLETES
  -> 42:   kvmppc_set_host_ipi(42, 0)
     42: // returns to executing guest
    105:   ppc_msgsnd_sync()/smp_mb()
    105:   ppc_msgsnd() -> 42
     42: local_paca->kvm_hstate.host_ipi == 0 // IPI ignored
    105: // hangs waiting on 42 to process messages/call_single_queue

Fixing this scenario would require an smp_mb() *after* clearing
host_ipi flag in kvmppc_set_host_ipi() to order the store vs.
subsequent processing of IPI messages.

To handle both cases, this patch splits kvmppc_set_host_ipi() into
separate set/clear functions, where we execute smp_mb() prior to
setting host_ipi flag, and after clearing host_ipi flag. These
functions pair with each other to synchronize the sender and receiver
sides.

With that change in place the above workload ran for 20 hours without
triggering any lock-ups.

Fixes: 755563bc ("powerpc/powernv: Fixes for hypervisor doorbell handling") # v4.0
Signed-off-by: NMichael Roth <mdroth@linux.vnet.ibm.com>
Acked-by: NPaul Mackerras <paulus@ozlabs.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190911223155.16045-1-mdroth@linux.vnet.ibm.com

Currently the reserved bits of the Processor Compatibility
Register (PCR) are cleared as per the Programming Note in Section
1.3.3 of version 3.0B of the Power ISA. This causes all new
architecture features to be made available when running on newer
processors with new architecture features added to the PCR as bits
must be set to disable a given feature.

For example to disable new features added as part of Version 2.07 of
the ISA the corresponding bit in the PCR needs to be set.

As new processor features generally require explicit kernel support
they should be disabled until such support is implemented. Therefore
kernels should set all unknown/reserved bits in the PCR such that any
new architecture features which the kernel does not currently know
about get disabled.

An update is planned to the ISA to clarify that the PCR is an
exception to the Programming Note on reserved bits in Section 1.3.3.
Signed-off-by: NAlistair Popple <alistair@popple.id.au>
Signed-off-by: NJordan Niethe <jniethe5@gmail.com>
Tested-by: NJoel Stanley <joel@jms.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190917004605.22471-2-alistair@popple.id.au

Introduce two options to control the use of the tlbie instruction. A
boot time option which completely disables the kernel using the
instruction, this is currently incompatible with HASH MMU, KVM, and
coherent accelerators.

And a debugfs option can be switched at runtime and avoids using tlbie
for invalidating CPU TLBs for normal process and kernel address
mappings. Coherent accelerators are still managed with tlbie, as will
KVM partition scope translations.

Cross-CPU TLB flushing is implemented with IPIs and tlbiel. This is a
basic implementation which does not attempt to make any optimisation
beyond the tlbie implementation.

This is useful for performance testing among other things. For example
in certain situations on large systems, using IPIs may be faster than
tlbie as they can be directed rather than broadcast. Later we may also
take advantage of the IPIs to do more interesting things such as trim
the mm cpumask more aggressively.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190902152931.17840-7-npiggin@gmail.com

No functional change.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190902152931.17840-4-npiggin@gmail.com

There should be no functional changes.

- Use calls to existing radix_tlb.c functions in flush_partition.

- Rename radix__flush_tlb_lpid to radix__flush_all_lpid and similar,
  because they flush everything, matching flush_all_mm rather than
  flush_tlb_mm for the lpid.

- Remove some unused radix_tlb.c flush primitives.

Signed-off: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190902152931.17840-3-npiggin@gmail.com

When an SVM makes an hypercall or incurs some other exception, the
Ultravisor usually forwards (a.k.a. reflects) the exceptions to the
Hypervisor. After processing the exception, Hypervisor uses the
UV_RETURN ultracall to return control back to the SVM.

The expected register state on entry to this ultracall is:

* Non-volatile registers are restored to their original values.
* If returning from an hypercall, register R0 contains the return value
  (unlike other ultracalls) and, registers R4 through R12 contain any
  output values of the hypercall.
* R3 contains the ultracall number, i.e UV_RETURN.
* If returning with a synthesized interrupt, R2 contains the
  synthesized interrupt number.

Thanks to input from Paul Mackerras, Ram Pai and Mike Anderson.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NClaudio Carvalho <cclaudio@linux.ibm.com>
Acked-by: NPaul Mackerras <paulus@ozlabs.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190822034838.27876-8-cclaudio@linux.ibm.com

Invalidating a TCE cache entry for each updated TCE is quite expensive.
This makes use of the new iommu_table_ops::xchg_no_kill()/tce_kill()
callbacks to bring down the time spent in mapping a huge guest DMA window;
roughly 20s to 10s for each guest's 100GB of DMA space.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Acked-by: NPaul Mackerras <paulus@ozlabs.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190829085252.72370-3-aik@ozlabs.ru

H_PUT_TCE_INDIRECT handlers receive a page with up to 512 TCEs from
a guest. Although we verify correctness of TCEs before we do anything
with the existing tables, there is a small window when a check in
kvmppc_tce_validate might pass and right after that the guest alters
the page with TCEs which can cause early exit from the handler and
leave srcu_read_lock(&vcpu->kvm->srcu) (virtual mode) or lock_rmap(rmap)
(real mode) locked.

This fixes the bug by jumping to the common exit code with an appropriate
unlock.

Fixes: 121f80ba ("KVM: PPC: VFIO: Add in-kernel acceleration for VFIO")
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190826045520.92153-1-aik@ozlabs.ru