- 23 3月, 2011 1 次提交
-
-
由 Lydia Wang 提交于
Use set_widgets_power_state() function to seperately control different codecs' power management actions and to replace the original large function. Also fix some wrong widgets power up sequence which caused no sound issue under Smart5.1 mode and Independent HP mode. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 22 3月, 2011 7 次提交
-
-
由 Lydia Wang 提交于
Since VT1708 didn't support the control of getting connection number, building of headphone control will fail in via_hp_build() function. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Correct stream names of analog playback and capture streams for VT1818S. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Add get_codec_type() in via_new_spec() function to make sure getting correct codec type before building mixer controls. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Modify vt_auto_create_analog_input_ctls() function to fix invalid a-a path volume adjust issue for VT1708S, VT1702 and VT1716S codecs. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Modify mute_aa_path() function to support VT1718S codec. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Modify via_independent_hp_put() function to support VT1718S and VT1812 codecs, and fix independent headphone no sound issue. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Lydia Wang 提交于
Modify function via_mux_enum_put() to fix stereo mixer recording no sound issue. Signed-off-by: NLydia Wang <lydiawang@viatech.com.cn> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 3月, 2011 2 次提交
-
-
由 Andres Mejia 提交于
Set EAPD for Realtek ALC665 (Vendor Id: 0x10eSet EAPD for Realtek ALC665 (Vendor Id: 0x10ec0665). Signed-off-by: NAndres Mejia <mcitadel@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Some USB devices give trailing spaces in strings returned from usb_string(). This confuses the automatic card-id creation, resulting always in "default". This patch fixes the behavior by removing trailing spaces. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 18 3月, 2011 4 次提交
-
-
由 Xiaochen Wang 提交于
Convert direct read of inode->i_size to using i_size_read(). i_size_read is guaranteed to return a valid value and its caller does not need to use addtional locking. Signed-off-by: NXiaochen Wang <wangxiaochen0@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 Dan Rosenberg 提交于
The user-supplied index into the adapters array needs to be checked, or an out-of-bounds kernel pointer could be accessed and used, leading to potentially exploitable memory corruption. Signed-off-by: NDan Rosenberg <drosenberg@vsecurity.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
loopback_pos_update() can be called in the timer callback, thus the lock held should be irq-safe. Otherwise you'll get AB/BA deadlock together with substream->self_group.lock. Reported-and-tested-by: NKnut Petersen <Knut_Petersen@t-online.de> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 17 3月, 2011 3 次提交
-
-
由 Takashi Iwai 提交于
-
由 Takashi Iwai 提交于
-
由 Nicolas Kaiser 提交于
Merge list_del() + list_add_tail() to list_move_tail(). Signed-off-by: NNicolas Kaiser <nikai@nikai.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 3月, 2011 3 次提交
-
-
由 Takashi Iwai 提交于
Merge branch 'for-2.6.39' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/asoc-2.6 into topic/asoc
-
由 Kirill A. Shutemov 提交于
Signed-off-by: NKirill A. Shutemov <kirill@shutemov.name> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Stephen Rothwell 提交于
fixes this error: sound/firewire/fcp.c: In function 'fcp_avc_transaction': sound/firewire/fcp.c:103: error: implicit declaration of function 'msleep' Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 15 3月, 2011 4 次提交
-
-
由 Clemens Ladisch 提交于
Add an AMDTP stream error state that occurs when we fail to queue another packet. In this case, the stream is stopped, and the error can be reported when the application tries to restart the PCM stream. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
For correct cache coherency on some architectures, DMA buffers must be allocated in a different cache line than data that is concurrently used by the CPU. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
In non-blocking mode, the SYT_INTERVAL is larger than the number of audio frames in each packet, so there are packets that do not contain any frame to which the SYT could be applied. For these packets, the SYT must not be the timestamp of the next valid SYT frame, but the special no-info SYT value. This fixes broken playback on the FireWave at 44.1 kHz. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Add a driver for two playback-only FireWire devices based on the OXFW970 chip. v2: better AMDTP API abstraction; fix fw_unit leak; small fixes v3: cache the iPCR value v4: FireWave constraints; fix fw_device reference counting; fix PCR caching; small changes and fixes v5: volume/mute support; fix crashing due to pcm stop races v6: fix build; one-channel volume for LaCie v7: use signed values to make volume (range checks) work; fix function block IDs for volume/mute; always use channel 0 for LaCie volume Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Acked-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Tested-by: NJay Fenlason <fenlason@redhat.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 14 3月, 2011 9 次提交
-
-
由 Takashi Iwai 提交于
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vitaliy Kulikov 提交于
This patch replaces use of the harcoded arrays of pins, muxes, digital mics and adcs with the auto-generated ones using codec parsing and auto-discovers all actually connected digital mic pins on 92HD8X-like codecs This patch also adds the support for d-mic on pin 0x20. Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Vitaliy Kulikov 提交于
When the mux for digital mic is different from the mux for other mics, the current auto-parser doesn't handle them in a right way but provides only one mic. This patch fixes the issue. Signed-off-by: NVitaliy Kulikov <Vitaliy.Kulikov@idt.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Move the default input-src selection code for alc268/269 to the init part instead of the parser. The input-src selection might be overwritten by init verbs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Currently some special handling for the unusual case like dual-ADCs or a single-input-src is done in the tree-parse time in set_capture_mixer(). But this setup could be overwritten by static init verbs. This patch moves the initialization into the init phase so that such input-src setup won't be lost. Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Przemyslaw Bruski 提交于
Clear input settings before initialization. Signed-off-by: NPrzemyslaw Bruski <pbruskispam@op.pl> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Przemyslaw Bruski 提交于
SDPIF status retrieval always returned the default settings instead of the actual ones. Signed-off-by: NPrzemyslaw Bruski <pbruskispam@op.pl> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Przemyslaw Bruski 提交于
SPDIF status mask creation was incorrect. Signed-off-by: NPrzemyslaw Bruski <pbruskispam@op.pl> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Przemyslaw Bruski 提交于
microphone boost was set at +12dB, not +20dB (like in Windows driver and in adc_conf structure declaration), some comments added. Signed-off-by: NPrzemyslaw Bruski <pbruskispam@op.pl> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 3月, 2011 7 次提交
-
-
由 Takashi Iwai 提交于
The time-out in snd_atiixp_aclink_reset() is wrongly checked, and it resulted in exiting from the loop at the first iteration. Reported-by: NAmir Shamsuddin <AmirS2+alsa@gmail.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Paul Bolle 提交于
Appending an 'm' will distinguish it from a similar struct in intel8x0.c Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Paul Bolle 提交于
Adding an 'm' will distinguish them from identical names in intel8x0.c. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Paul Bolle 提交于
At every resume a laptop I use prints this message (at KERN_ERR level): ALSA sound/pci/intel8x0m.c:904: AC'97 warm reset still in progress? [0x2] The thing to note here is that 0x2 corresponds to ICH_AC97COLD. Ie, what seems to be happening is that the register involved indicated a warm reset for some time (as the ICH_AC97WARM bit was set) but by the time the warning is printed, and that same register is checked again, that bit is already cleared and only the ICH_AC97COLD bit is still set. It turns out a warm reset needs some time to settle, but it is currently checked right away. The test therefore fails the first time it is done and schedule_timeout_uninterruptible() will be called. Once we return from that jiffies is already (far) past end_time on this laptop, so we exit the loop, print a warning, and exit the function while the warm reset actually succeeded. A way to fix this is to call usleep_range() after writing to the register involved. A handful of tests suggest 500 usecs is a safe value. (This might punish the "finish cold reset" case, but on this laptop such a cold reset apparently never happens, so I can't say for sure.) While we're at it drop the extra single tick from end_time, as it looks rather silly. Signed-off-by: NPaul Bolle <pebolle@tiscali.nl> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Oliver Neukum 提交于
Devices are autosuspended if no pcm nor midi channel is open Mixer devices may be opened. This way they are active when in use to play or record sound, but can be suspended while users have a mixer application running. [Small clean-ups using static inline by tiwai] Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Oliver Neukum 提交于
- ESHUTDOWN must be correctly handled - the optional interrupt endpoint's URB must be stopped and restarted Signed-off-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-