Straightforward.  As an aside, the ida_init calls are not needed as far as
I can see needed.  (DEFINE_IDA does the same already).
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Acked-by: NClifton Barnes <cabarnes@indesign-llc.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add "depends on GENERIC_HARDIRQS" to avoid compile breakage on s390:

drivers/built-in.o: In function `pps_gpio_remove':
linux-next/drivers/pps/clients/pps-gpio.c:189: undefined reference to `free_irq'
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Cc: James Nuss <jamesnuss@nanometrics.ca>
Cc: Rodolfo Giometti <giometti@enneenne.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This client driver allows you to use a GPIO pin as a source for PPS
signals.  Platform data [1] are used to specify the GPIO pin number,
label, assert event edge type, and whether clear events are captured.

This driver is based on the work by Ricardo Martins who submitted an
initial implementation [2] of a PPS IRQ client driver to the linuxpps
mailing-list on Dec 3 2010.

[1] include/linux/pps-gpio.h
[2] http://ml.enneenne.com/pipermail/linuxpps/2010-December/004155.html

[akpm@linux-foundation.org: remove unneeded cast of void*]
Signed-off-by: NJames Nuss <jamesnuss@nanometrics.ca>
Cc: Ricardo Martins <rasm@fe.up.pt>
Acked-by: NRodolfo Giometti <giometti@linux.it>
Signed-off-by: NRicardo Martins <rasm@fe.up.pt>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Igor Plyatov <plyatov@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

A default echo function has been provided so it is no longer an error when
you specify PPS_ECHOASSERT or PPS_ECHOCLEAR without an explicit echo
function.  This allows some code re-use and also makes it easier to write
client drivers since the default echo function does not normally need to
change.
Signed-off-by: NJames Nuss <jamesnuss@nanometrics.ca>
Reviewed-by: NBen Gardiner <bengardiner@nanometrics.ca>
Acked-by: NRodolfo Giometti <giometti@linux.it>
Cc: Ricardo Martins <rasm@fe.up.pt>
Cc: Alexander Gordeev <lasaine@lvk.cs.msu.su>
Cc: Igor Plyatov <plyatov@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Lots of driver code does a dma_alloc_coherent() and then zeroes out the
memory with a memset.  Make it easy for them.

Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When I tried to send a patch to remove it, Andi told me we still need to
keep compabitlies for old libc, so we can't remove this completely.  Then
just make it default to n and remove the doc from
feature-removal-schedule.txt.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Adding support for poll() in sysctl fs allows userspace to receive
notifications of changes in sysctl entries.  This adds a infrastructure to
allow files in sysctl fs to be pollable and implements it for hostname and
domainname.

[akpm@linux-foundation.org: s/declare/define/ for definitions]
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Greg KH <gregkh@suse.de>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update rapidio.txt to reflect changes from recent patch.
See http://marc.info/?l=linux-kernel&m=131285620113589&w=2 for details.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Liu Gang <Gang.Liu@freescale.com>
Cc: Micha Nelissen <micha@neli.hopto.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Modify Ethernet addess macros to be compatible with BE/LE platforms
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Chul Kim <chul.kim@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Cc: <stable@kernel.org>		[2.6.39+]
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The "goto cleanup" path can deference "rswitch" when it is NULL.
Reported-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Dan Carpenter <error27@gmail.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Chul Kim <chul.kim@idt.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add RapidIO mport driver for IDT TSI721 PCI Express-to-SRIO bridge device.
 The driver provides full set of callback functions defined for mport
devices in RapidIO subsystem.  It also is compatible with current version
of RIONET driver (Ethernet over RapidIO messaging services).

This patch is applicable to kernel versions starting from 2.6.39.
Signed-off-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: NChul Kim <chul.kim@idt.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Li Yang <leoli@freescale.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

arch/powerpc/sysdev/fsl_rio.c: release rapidio port I/O region resource if port failed to initialize

The "struct rio_mport" contains a member of master port I/O memory
resource structure "struct resource iores".  This resource will be read
from device tree and be used for rapidio R/W transaction memory space.
Rapidio requests the port I/O memory resource under the root resource
"iomem_resource".

			struct rio_mport *port;
			port = kzalloc(sizeof(struct rio_mport), GFP_KERNEL);

			request_resource(&iomem_resource, &port->iores);

When port failed to initialize, allocated "rio_mport" structure memory
will be freed, and the port I/O memory resource structure pointer
"&port->iores" will be invalid.  If other requests resource under
"iomem_resource", "&port->iores" node may be operated in the child
resources list and this will cause the system to crash.

So the requested port I/O memory resource should be released before
freeing allocated "rio_mport" structure.
Signed-off-by: NLiu Gang <Gang.Liu@freescale.com>
Acked-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The discovered bit in PGCCSR register indicates if the device has been
discovered by system host.  In Rapidio systems, some agent devices can also
be master devices.  They can issue requests into the system.
Signed-off-by: NLiu Gang <Gang.Liu@freescale.com>
Acked-by: NAlexandre Bounine <alexandre.bounine@idt.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Expand root=PARTUUID=UUID syntax to support selecting a root partition by
integer offset from a known, unique partition.  This approach provides
similar properties to specifying a device and partition number, but using
the UUID as the unique path prior to evaluating the offset.

For example,
  root=PARTUUID=99DE9194-FC15-4223-9192-FC243948F88B/PARTNROFF=1
selects the partition with UUID 99DE.. then select the next
partition.

This change is motivated by a particular usecase in Chromium OS where the
bootloader can easily determine what partition it is on (by UUID) but
doesn't perform general partition table walking.

That said, support for this model provides a direct mechanism for the user
to modify the root partition to boot without specifically needing to
extract each UUID or update the bootloader explicitly when the root
partition UUID is changed (if it is recreated to be larger, for instance).
 Pinning to a /boot-style partition UUID allows the arbitrary root
partition reconfiguration/modifications with slightly less ambiguity than
just [dev][partition] and less stringency than the specific root partition
UUID.

[sfr@canb.auug.org.au: fix init sections warning]
Signed-off-by: NWill Drewry <wad@chromium.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For the sysvsem undo, each task struct contains a sysv_sem structure with
a pointer to the undo information.

This pointer is only necessary if sysvipc is enabled - thus the pointer
can be made conditional on CONFIG_SYSVIPC.
Signed-off-by: NManfred Spraul <manfred@colorfullife.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

include/linux/sem.h contains several structures that are only used within
ipc/sem.c.

The patch moves them into ipc/sem.c - there is no need to expose the
structures to the whole kernel.

No functional changes, only whitespace cleanups and 80-char per line
fixes.
Signed-off-by: NManfred Spraul <manfred@colorfullife.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

semtimedop() does not handle spurious wakeups, it returns -EINTR to user
space.  Most other schedule() users would just loop and not return to user
space.  The patch adds such a loop to semtimedop()
Signed-off-by: NManfred Spraul <manfred@colorfullife.com>
Reported-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Galbraith <efault@gmx.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

sys_semtimedop() may return -EIDRM although the semaphore operation
completed successfully:

thread 1:	thread 2:
		semtimedop(), sleeps
semop():
* acquires sem_lock()
		semtimedop() woken up due to timeout
		sem_lock() loops
* notices that thread 2 could be completed.
* performs the operations that thread 2 is sleeping on.
* marks the semaphore operation as IN_WAKEUP
* drops sem_lock(), does wakeup, sets return code to 0
		* thread delayed due to interrupt, whatever
* returns to user space
		* thread still delayed
semctl(IPC_RMID)
* acquires sem_lock()
* ipc_rmid(), ipcp->deleted=1
* drops sem_lock()
		* thread finally continues - but seem_lock()
		  now fails due to ipcp->deleted == 1
		* returns -EIDRM instead of 0

The fix is trivial: Always use the return code in queue.status.

In real world, the race probably doesn't matter:
If the semaphore array is destroyed, the app is probably not interested
if the last operation succeeded or was already cancelled.
Signed-off-by: NManfred Spraul <manfred@colorfullife.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mike Galbraith <efault@gmx.de>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's often convenient to be able to release resource from IRQ context.
Make ida_simple_*() use irqsave/restore spin ops so that they are IRQ
safe.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NRusty Russell <rusty@rustcorp.com.au>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fd* files are restricted to the task's owner, and other users may not get
direct access to them.  But one may open any of these files and run any
setuid program, keeping opened file descriptors.  As there are permission
checks on open(), but not on readdir() and read(), operations on the kept
file descriptors will not be checked.  It makes it possible to violate
procfs permission model.

Reading fdinfo/* may disclosure current fds' position and flags, reading
directory contents of fdinfo/ and fd/ may disclosure the number of opened
files by the target task.  This information is not sensible per se, but it
can reveal some private information (like length of a password stored in a
file) under certain conditions.

Used existing (un)lock_trace functions to check for ptrace_may_access(),
but instead of using EPERM return code from it use EACCES to be consistent
with existing proc_pid_follow_link()/proc_pid_readlink() return code.  If
they differ, attacker can guess what fds exist by analyzing stat() return
code.  Patched handlers: stat() for fd/*, stat() and read() for fdindo/*,
readdir() and lookup() for fd/ and fdinfo/.
Signed-off-by: NVasiliy Kulikov <segoon@openwall.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: <stable@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On reading sysctl dirs we should return -EISDIR instead of -EINVAL.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

{get,put}_mems_allowed() exist so that general kernel code may locklessly
access a task's set of allowable nodes without having the chance that a
concurrent write will cause the nodemask to be empty on configurations
where MAX_NUMNODES > BITS_PER_LONG.

This could incur a significant delay, however, especially in low memory
conditions because the page allocator is blocking and reclaim requires
get_mems_allowed() itself.  It is not atypical to see writes to
cpuset.mems take over 2 seconds to complete, for example.  In low memory
conditions, this is problematic because it's one of the most imporant
times to change cpuset.mems in the first place!

The only way a task's set of allowable nodes may change is through cpusets
by writing to cpuset.mems and when attaching a task to a generic code is
not reading the nodemask with get_mems_allowed() at the same time, and
then clearing all the old nodes.  This prevents the possibility that a
reader will see an empty nodemask at the same time the writer is storing a
new nodemask.

If at least one node remains unchanged, though, it's possible to simply
set all new nodes and then clear all the old nodes.  Changing a task's
nodemask is protected by cgroup_mutex so it's guaranteed that two threads
are not changing the same task's nodemask at the same time, so the
nodemask is guaranteed to be stored before another thread changes it and
determines whether a node remains set or not.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Paul Menage <paul@paulmenage.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

warning: symbol 'swap_cgroup_ctrl' was not declared. Should it be static?
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Paul Menage <paul@paulmenage.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Acked-by: NBalbir Singh <bsingharora@gmail.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Various code in memcontrol.c () calls this_cpu_read() on the calculations
to be done from two different percpu variables, or does an open-coded
read-modify-write on a single percpu variable.

Disable preemption throughout these operations so that the writes go to
the correct palces.

[hannes@cmpxchg.org: added this_cpu to __this_cpu conversion]
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a potential race between a thread charging a page and another
thread putting it back to the LRU list:

  charge:                         putback:
  SetPageCgroupUsed               SetPageLRU
  PageLRU && add to memcg LRU     PageCgroupUsed && add to memcg LRU

The order of setting one flag and checking the other is crucial, otherwise
the charge may observe !PageLRU while the putback observes !PageCgroupUsed
and the page is not linked to the memcg LRU at all.

Global memory pressure may fix this by trying to isolate and putback the
page for reclaim, where that putback would link it to the memcg LRU again.
 Without that, the memory cgroup is undeletable due to a charge whose
physical page can not be found and moved out.
Signed-off-by: NJohannes Weiner <jweiner@redhat.com>
Cc: Ying Han <yinghan@google.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Reclaim decides to skip scanning an active list when the corresponding
inactive list is above a certain size in comparison to leave the assumed
working set alone while there are still enough reclaim candidates around.

The memcg implementation of comparing those lists instead reports whether
the whole memcg is low on the requested type of inactive pages,
considering all nodes and zones.

This can lead to an oversized active list not being scanned because of the
state of the other lists in the memcg, as well as an active list being
scanned while its corresponding inactive list has enough pages.

Not only is this wrong, it's also a scalability hazard, because the global
memory state over all nodes and zones has to be gathered for each memcg
and zone scanned.

Make these calculations purely based on the size of the two LRU lists
that are actually affected by the outcome of the decision.
Signed-off-by: NJohannes Weiner <jweiner@redhat.com>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <bsingharora@gmail.com>
Reviewed-by: NMinchan Kim <minchan.kim@gmail.com>
Reviewed-by: NYing Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If somebody is touching data too early, it might be easier to diagnose a
problem when dereferencing NULL at mem->info.nodeinfo[node] than trying to
understand why mem_cgroup_per_zone is [un|partly]initialized.
Signed-off-by: NIgor Mammedov <imammedo@redhat.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Before calling schedule_timeout(), task state should be changed.
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The memcg code sometimes uses "struct mem_cgroup *mem" and sometimes uses
"struct mem_cgroup *memcg".  Rename all mem variables to memcg in source
file.
Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When the cgroup base was allocated with kmalloc, it was necessary to
annotate the variable with kmemleak_not_leak().  But because it has
recently been changed to be allocated with alloc_page() (which skips
kmemleak checks) causes a warning on boot up.

I was triggering this output:

 allocated 8388608 bytes of page_cgroup
 please try 'cgroup_disable=memory' option if you don't want memory cgroups
 kmemleak: Trying to color unknown object at 0xf5840000 as Grey
 Pid: 0, comm: swapper Not tainted 3.0.0-test #12
 Call Trace:
  [<c17e34e6>] ? printk+0x1d/0x1f^M
  [<c10e2941>] paint_ptr+0x4f/0x78
  [<c178ab57>] kmemleak_not_leak+0x58/0x7d
  [<c108ae9f>] ? __rcu_read_unlock+0x9/0x7d
  [<c1cdb462>] kmemleak_init+0x19d/0x1e9
  [<c1cbf771>] start_kernel+0x346/0x3ec
  [<c1cbf1b4>] ? loglevel+0x18/0x18
  [<c1cbf0aa>] i386_start_kernel+0xaa/0xb0

After a bit of debugging I tracked the object 0xf840000 (and others) down
to the cgroup code.  The change from allocating base with kmalloc to
alloc_page() has the base not calling kmemleak_alloc() which adds the
pointer to the object_tree_root, but kmemleak_not_leak() adds it to the
crt_early_log[] table.  On kmemleak_init(), the entry is found in the
early_log[] but not the object_tree_root, and this error message is
displayed.

If alloc_page() fails then it defaults back to vmalloc() which still uses
the kmemleak_alloc() which makes us still need the kmemleak_not_leak()
call.  The solution is to call the kmemleak_alloc() directly if the
alloc_page() succeeds.
Reviewed-by: NMichal Hocko <mhocko@suse.cz>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NJonathan Nieder <jrnieder@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If a task has exited to the point it has called cgroup_exit() already,
then we can't migrate it to another cgroup anymore.

This can happen when we are attaching a task to a new cgroup between the
call to ->can_attach_task() on subsystems and the migration that is
eventually tried in cgroup_task_migrate().

In this case cgroup_task_migrate() returns -ESRCH and we don't want to
attach the task to the subsystems because the attachment to the new cgroup
itself failed.

Fix this by only calling ->attach_task() on the subsystems if the cgroup
migration succeeded.
Reported-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NBen Blum <bblum@andrew.cmu.edu>
Acked-by: NPaul Menage <paul@paulmenage.org>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix unstable tasklist locking in cgroup_attach_proc.

According to this thread - https://lkml.org/lkml/2011/7/27/243 - RCU is
not sufficient to guarantee the tasklist is stable w.r.t.  de_thread and
exit.  Taking tasklist_lock for reading, instead of rcu_read_lock, ensures
proper exclusion.
Signed-off-by: NBen Blum <bblum@andrew.cmu.edu>
Acked-by: NPaul Menage <paul@paulmenage.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Neil Brown <neilb@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Clement Lecigne reports a filesystem which causes a kernel oops in
hfs_find_init() trying to dereference sb->ext_tree which is NULL.

This proves to be because the filesystem has a corrupted MDB extent
record, where the extents file does not fit into the first three extents
in the file record (the first blocks).

In hfs_get_block() when looking up the blocks for the extent file
(HFS_EXT_CNID), it fails the first blocks special case, and falls
through to the extent code (which ultimately calls hfs_find_init())
which is in the process of being initialised.

Hfs avoids this scenario by always having the extents b-tree fitting
into the first blocks (the extents B-tree can't have overflow extents).

The fix is to check at mount time that the B-tree fits into first
blocks, i.e.  fail if HFS_I(inode)->alloc_blocks >=
HFS_I(inode)->first_blocks

Note, the existing commit 47f365eb ("hfs: fix oops on mount with
corrupted btree extent records") becomes subsumed into this as a special
case, but only for the extents B-tree (HFS_EXT_CNID), it is perfectly
acceptable for the catalog B-Tree file to grow beyond three extents,
with the remaining extent descriptors in the extents overfow.

This fixes CVE-2011-2203
Reported-by: NClement LECIGNE <clement.lecigne@netasq.com>
Signed-off-by: NPhillip Lougher <plougher@redhat.com>
Cc: Jeff Mahoney <jeffm@suse.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use mpage_readpages() instead of multiple calls to isofs_readpage() to
reduce the CPU utilization and make performance higher.
Signed-off-by: NNamjae Jeon <linkinjeon@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

One can get this information from minix/inode.c, but adding the
explanations at the definition sites is more appropriate.
Signed-off-by: NSami Kerola <kerolasa@iki.fi>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The driver is added using platform_driver_probe(), so the callbacks can be
discarded more aggessively.
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add initial support for the microchip mcp7941x series of real time clocks.

The mcp7941x series is generally compatible with the ds1307 and ds1337 rtc
devices from dallas semiconductor.  minor differences include a backup
battery enable bit, and the polarity of the oscillator enable bit.
Signed-off-by: NDavid Anders <danders.dev@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Reviewed-by: NWolfram Sang <w.sang@pengutronix.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is the one use of an ida that doesn't retry on receiving -EAGAIN.
I'm assuming do so will cause no harm and may help on a rare occasion.
Signed-off-by: NJonathan Cameron <jic23@cam.ac.uk>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When a cramfs ramdisk padded with 512 bytes is given to the kernel, the
current identify_ramdisk_image function fails to identify it.

Tested with a padded cramfs image on an ARM based board.
Signed-off-by: NNeil Armstrong <narmstrong@neotion.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Davidlohr Bueso <dave@gnu.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Since ramfs is hard-selected to "y", the module leftovers make no sense.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Reviewed-by: NWANG Cong <xiyou.wangcong@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>