Skip to content

K
Kernel

openeuler / Kernel
12 个月 前同步成功

通知 5
Star 0
Fork 0
K
Kernel

体验新版 GitCode，发现更多精彩内容 >>

切换分支/标签
  1. 20 7月, 2012 7 次提交
  3. 19 7月, 2012 7 次提交
    • E
      cx25821: Remove bad strcpy to read-only char* · 380e99fc
      由 Ezequiel Garcia 提交于 
      The strcpy was being used to set the name of the board.  Since the
destination char* was read-only and the name is set statically at
compile time; this was both wrong and redundant.

The type of char* is changed to const char* to prevent future errors.
Reported-by: NRadek Masin <radek@masin.eu>
Signed-off-by: NEzequiel Garcia <elezegarcia@gmail.com>
[ Taking directly due to vacations   - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      380e99fc
    • B
      HID: hid-multitouch: add support for Zytronic panels · e9a09aed
      由 Benjamin Tissoires 提交于 
      Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@enac.fr>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>
      e9a09aed
    • N
      md/raid1: close some possible races on write errors during resync · 58e94ae1
      由 NeilBrown 提交于 
      commit 4367af55
   md/raid1: clear bad-block record when write succeeds.

Added a 'reschedule_retry' call possibility at the end of
end_sync_write, but didn't add matching code at the end of
sync_request_write.  So if the writes complete very quickly, or
scheduling makes it seem that way, then we can miss rescheduling
the request and the resync could hang.

Also commit 73d5c38a
    md: avoid races when stopping resync.

Fix a race condition in this same code in end_sync_write but didn't
make the change in sync_request_write.

This patch updates sync_request_write to fix both of those.
Patch is suitable for 3.1 and later kernels.
Reported-by: NAlexander Lyakas <alex.bolshoy@gmail.com>
Original-version-by: NAlexander Lyakas <alex.bolshoy@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NNeilBrown <neilb@suse.de>
      58e94ae1
    • N
      md: avoid crash when stopping md array races with closing other open fds. · a05b7ea0
      由 NeilBrown 提交于 
      md will refuse to stop an array if any other fd (or mounted fs) is
using it.
When any fs is unmounted of when the last open fd is closed all
pending IO will be flushed (e.g. sync_blockdev call in __blkdev_put)
so there will be no pending IO to worry about when the array is
stopped.

However in order to send the STOP_ARRAY ioctl to stop the array one
must first get and open fd on the block device.
If some fd is being used to write to the block device and it is closed
after mdadm open the block device, but before mdadm issues the
STOP_ARRAY ioctl, then there will be no last-close on the md device so
__blkdev_put will not call sync_blockdev.

If this happens, then IO can still be in-flight while md tears down
the array and bad things can happen (use-after-free and subsequent
havoc).

So in the case where do_md_stop is being called from an open file
descriptor, call sync_block after taking the mutex to ensure there
will be no new openers.

This is needed when setting a read-write device to read-only too.

Cc: stable@vger.kernel.org
Reported-by: Nmajianpeng <majianpeng@gmail.com>
Signed-off-by: NNeilBrown <neilb@suse.de>
      a05b7ea0
    • N
      md: fix bug in handling of new_data_offset · 25f7fd47
      由 NeilBrown 提交于 
      commit c6563a8c
    md: add possibility to change data-offset for devices.

introduced a 'new_data_offset' attribute which should normally
be the same as 'data_offset', but can be explicitly set to a different
value to allow a reshape operation to move the data.

Unfortunately when the 'data_offset' is explicitly set through
sysfs, the new_data_offset is not also set, so the two would become
out-of-sync incorrectly.

One result of this is that trying to set the 'size' after the
'data_offset' would fail because it is not permitted to set the size
when the 'data_offset' and 'new_data_offset' are different - as that
can be confusing.
Consequently when mdadm tried to do this while assembling an IMSM
array it would fail.

This bug was introduced in 3.5-rc1.
Reported-by: NBrian Downing <bdowning@lavos.net>
Bisected-by: NBrian Downing <bdowning@lavos.net>
Tested-by: NBrian Downing <bdowning@lavos.net>
Signed-off-by: NNeilBrown <neilb@suse.de>
      25f7fd47
    • L
      Make wait_for_device_probe() also do scsi_complete_async_scans() · eea03c20
      由 Linus Torvalds 提交于 
      Commit a7a20d10 ("sd: limit the scope of the async probe domain")
make the SCSI device probing run device discovery in it's own async
domain.

However, as a result, the partition detection was no longer synchronized
by async_synchronize_full() (which, despite the name, only synchronizes
the global async space, not all of them).  Which in turn meant that
"wait_for_device_probe()" would not wait for the SCSI partitions to be
parsed.

And "wait_for_device_probe()" was what the boot time init code relied on
for mounting the root filesystem.

Now, most people never noticed this, because not only is it
timing-dependent, but modern distributions all use initrd.  So the root
filesystem isn't actually on a disk at all.  And then before they
actually mount the final disk filesystem, they will have loaded the
scsi-wait-scan module, which not only does the expected
wait_for_device_probe(), but also does scsi_complete_async_scans().

[ Side note: scsi_complete_async_scans() had also been partially broken,
  but that was fixed in commit 43a8d39d ("fix async probe
  regression"), so that same commit a7a20d10 had actually broken
  setups even if you used scsi-wait-scan explicitly ]

Solve this problem by just moving the scsi_complete_async_scans() call
into wait_for_device_probe().  Everybody who wants to wait for device
probing to finish really wants the SCSI probing to complete, so there's
no reason not to do this.

So now "wait_for_device_probe()" really does what the name implies, and
properly waits for device probing to finish.  This also removes the now
unnecessary extra calls to scsi_complete_async_scans().
Reported-and-tested-by: NArtem S. Tashkinov <t.artem@mailcity.com>
Cc: Dan Williams <dan.j.williams@gmail.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: James Bottomley <jbottomley@parallels.com>
Cc: Borislav Petkov <bp@amd64.org>
Cc: linux-scsi <linux-scsi@vger.kernel.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      eea03c20
    • H
      v4l2-dev: forgot to add VIDIOC_DV_TIMINGS_CAP. · c1e32096
      由 Hans Verkuil 提交于 
      The VIDIOC_DV_TIMINGS_CAP ioctl check wasn't added to determine_valid_ioctls().
This caused this ioctl to always return -ENOTTY.

The cause for this was that for 3.5 two patch series were merged, one
changing V4L2 core ioctl handling and one adding new functionality, and
some of the new functionality wasn't handled by the new V4L2 core code.
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com>
[ Taking it directly due to vacations  - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      c1e32096
  5. 18 7月, 2012 8 次提交
  7. 17 7月, 2012 8 次提交
  9. 15 7月, 2012 4 次提交
  11. 14 7月, 2012 3 次提交
  13. 13 7月, 2012 3 次提交