Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 24 9月, 2012 8 次提交
  3. 21 9月, 2012 4 次提交
    • X
      perf kvm: Events analysis tool · bcf6edcd
      由 Xiao Guangrong 提交于 
      Add 'perf kvm stat' support to analyze kvm vmexit/mmio/ioport smartly

Usage:
- kvm stat
  run a command and gather performance counter statistics, it is the alias of
  perf stat

- trace kvm events:
  perf kvm stat record, or, if other tracepoints are interesting as well, we
  can append the events like this:
  perf kvm stat record -e timer:* -a

  If many guests are running, we can track the specified guest by using -p or
  --pid, -a is used to track events generated by all guests.

- show the result:
  perf kvm stat report

The output example is following:
13005
13059

total 2 guests are running on the host

Then, track the guest whose pid is 13059:
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.253 MB perf.data.guest (~11065 samples) ]

See the vmexit events:

Analyze events for all VCPUs:

             VM-EXIT    Samples  Samples%     Time%         Avg time

         APIC_ACCESS        460    70.55%     0.01%     22.44us ( +-   1.75% )
                 HLT         93    14.26%    99.98% 832077.26us ( +-  10.42% )
  EXTERNAL_INTERRUPT         64     9.82%     0.00%     35.35us ( +-  14.21% )
   PENDING_INTERRUPT         24     3.68%     0.00%      9.29us ( +-  31.39% )
           CR_ACCESS          7     1.07%     0.00%      8.12us ( +-   5.76% )
      IO_INSTRUCTION          3     0.46%     0.00%     18.00us ( +-  11.79% )
       EXCEPTION_NMI          1     0.15%     0.00%      5.83us ( +-   -nan% )

Total Samples:652, Total events handled time:77396109.80us.

See the mmio events:

Analyze events for all VCPUs:

         MMIO Access    Samples  Samples%     Time%         Avg time

        0xfee00380:W        387    84.31%    79.28%      8.29us ( +-   3.32% )
        0xfee00300:W         24     5.23%     9.96%     16.79us ( +-   1.97% )
        0xfee00300:R         24     5.23%     7.83%     13.20us ( +-   3.00% )
        0xfee00310:W         24     5.23%     2.93%      4.94us ( +-   3.84% )

Total Samples:459, Total events handled time:4044.59us.

See the ioport event:

Analyze events for all VCPUs:

      IO Port Access    Samples  Samples%     Time%         Avg time

         0xc050:POUT          3   100.00%   100.00%     13.75us ( +-  10.83% )

Total Samples:3, Total events handled time:41.26us.

And, --vcpu is used to track the specified vcpu and --key is used to sort the
result:

Analyze events for VCPU 0:

             VM-EXIT    Samples  Samples%     Time%         Avg time

                 HLT         27    13.85%    99.97% 405790.24us ( +-  12.70% )
  EXTERNAL_INTERRUPT         13     6.67%     0.00%     27.94us ( +-  22.26% )
         APIC_ACCESS        146    74.87%     0.03%     21.69us ( +-   2.91% )
      IO_INSTRUCTION          2     1.03%     0.00%     17.77us ( +-  20.56% )
           CR_ACCESS          2     1.03%     0.00%      8.55us ( +-   6.47% )
   PENDING_INTERRUPT          5     2.56%     0.00%      6.27us ( +-   3.94% )

Total Samples:195, Total events handled time:10959950.90us.
Signed-off-by: NDong Hao <haodong@linux.vnet.ibm.com>
Signed-off-by: NRunzhen Wang <runzhen@linux.vnet.ibm.com>
[ Dong Hao <haodong@linux.vnet.ibm.com>
  Runzhen Wang <runzhen@linux.vnet.ibm.com>:
     - rebase it on current acme's tree
     - fix the compiling-error on i386 ]
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1347870675-31495-4-git-send-email-haodong@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      bcf6edcd
    • X
      KVM: x86: Export svm/vmx exit code and vector code to userspace · 26bf264e
      由 Xiao Guangrong 提交于 
      Exporting KVM exit information to userspace to be consumed by perf.
Signed-off-by: NDong Hao <haodong@linux.vnet.ibm.com>
[ Dong Hao <haodong@linux.vnet.ibm.com>: rebase it on acme's git tree ]
Signed-off-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Acked-by: NMarcelo Tosatti <mtosatti@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: kvm@vger.kernel.org
Cc: Runzhen Wang <runzhen@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1347870675-31495-2-git-send-email-haodong@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      26bf264e
    • E
      perf tools: Fix parallel build · e6048fb8
      由 Eric Sandeen 提交于 
      Parallel builds of perf were failing for me on a 32p box, with:

    * new build flags or prefix
util/pmu.l:7:23: error: pmu-bison.h: No such file or directory

...

make: *** [util/pmu-flex.o] Error 1
make: *** Waiting for unfinished jobs....

This can pretty quickly be seen by adding a sleep in front of the bison
calls in tools/perf/Makefile and running make -j4 on a smaller box i.e.:

	sleep 10; $(QUIET_BISON)$(BISON) -v util/pmu.y -d -o $(OUTPUT)util/pmu-bison.c

Adding the following dependencies fixes it for me.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/505BD190.40707@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e6048fb8
    • S
      perf record: Print event causing perf_event_open() to fail · 1863fbbb
      由 Stephane Eranian 提交于 
      Got tired of not getting the event that caused the perf_event_open()
syscall to fail. So I fixed the error message. This is very useful when
monitoring lots of events in a single run.
Signed-off-by: NStephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120920161945.GA7064@quadSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      1863fbbb
  5. 20 9月, 2012 2 次提交
  7. 19 9月, 2012 3 次提交
  9. 18 9月, 2012 12 次提交
  11. 15 9月, 2012 11 次提交
    • O
      uprobes: Make arch_uprobe_task->saved_trap_nr "unsigned int" · baedbf02
      由 Oleg Nesterov 提交于 
      Make arch_uprobe_task->saved_trap_nr "unsigned int" and move it down
after ->saved_scratch_register, this changes sizeof() from 24 to 16.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      baedbf02
    • O
      uprobes/x86: Fix arch_uprobe_disable_step() && UTASK_SSTEP_TRAPPED interaction · d6a00b35
      由 Oleg Nesterov 提交于 
      arch_uprobe_disable_step() should also take UTASK_SSTEP_TRAPPED into
account. In this case the probed insn was not executed, we need to
clear X86_EFLAGS_TF if it was set by us and that is all.

Again, this code will look more clean when we move it into
arch_uprobe_post_xol() and arch_uprobe_abort_xol().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      d6a00b35
    • O
      uprobes/x86: Xol should send SIGTRAP if X86_EFLAGS_TF was set · 3a4664aa
      由 Oleg Nesterov 提交于 
      arch_uprobe_disable_step() correctly preserves X86_EFLAGS_TF and
returns to user-mode. But this means the application gets SIGTRAP
only after the next insn.

This means that UPROBE_CLEAR_TF logic is not really right. _enable
should only record the state of X86_EFLAGS_TF, and _disable should
check it separately from UPROBE_FIX_SETF.

Remove arch_uprobe_task->restore_flags, add ->saved_tf instead, and
change enable/disable accordingly. This assumes that the probed insn
was not trapped, see the next patch.

arch_uprobe_skip_sstep() logic has the same problem, change it to
check X86_EFLAGS_TF and send SIGTRAP as well. We will cleanup this
all after we fold enable/disable_step into pre/post_hol hooks.

Note: send_sig(SIGTRAP) is not actually right, we need send_sigtrap().
But this needs more changes, handle_swbp() does the same and this is
equally wrong.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      3a4664aa
    • O
      uprobes/x86: Do not (ab)use TIF_SINGLESTEP/user_*_single_step() for single-stepping · 9bd1190a
      由 Oleg Nesterov 提交于 
      user_enable/disable_single_step() was designed for ptrace, it assumes
a single user and does unnecessary and wrong things for uprobes. For
example:

	- arch_uprobe_enable_step() can't trust TIF_SINGLESTEP, an
	  application itself can set X86_EFLAGS_TF which must be
	  preserved after arch_uprobe_disable_step().

	- we do not want to set TIF_SINGLESTEP/TIF_FORCED_TF in
	  arch_uprobe_enable_step(), this only makes sense for ptrace.

	- otoh we leak TIF_SINGLESTEP if arch_uprobe_disable_step()
	  doesn't do user_disable_single_step(), the application will
	  be killed after the next syscall.

	- arch_uprobe_enable_step() does access_process_vm() we do
	  not need/want.

Change arch_uprobe_enable/disable_step() to set/clear X86_EFLAGS_TF
directly, this is much simpler and more correct. However, we need to
clear TIF_BLOCKSTEP/DEBUGCTLMSR_BTF before executing the probed insn,
add set_task_blockstep(false).

Note: with or without this patch, there is another (hopefully minor)
problem. A probed "pushf" insn can see the wrong X86_EFLAGS_TF set by
uprobes. Perhaps we should change _disable to update the stack, or
teach arch_uprobe_skip_sstep() to emulate this insn.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      9bd1190a
    • O
      ptrace/x86: Partly fix set_task_blockstep()->update_debugctlmsr() logic · 95cf00fa
      由 Oleg Nesterov 提交于 
      Afaics the usage of update_debugctlmsr() and TIF_BLOCKSTEP in
step.c was always very wrong.

1. update_debugctlmsr() was simply unneeded. The child sleeps
   TASK_TRACED, __switch_to_xtra(next_p => child) should notice
   TIF_BLOCKSTEP and set/clear DEBUGCTLMSR_BTF after resume if
   needed.

2. It is wrong. The state of DEBUGCTLMSR_BTF bit in CPU register
   should always match the state of current's TIF_BLOCKSTEP bit.

3. Even get_debugctlmsr() + update_debugctlmsr() itself does not
   look right. Irq can change other bits in MSR_IA32_DEBUGCTLMSR
   register or the caller can be preempted in between.

4. It is not safe to play with TIF_BLOCKSTEP if task != current.
   DEBUGCTLMSR_BTF and TIF_BLOCKSTEP should always match each
   other if the task is running. The tracee is stopped but it
   can be SIGKILL'ed right before set/clear_tsk_thread_flag().

However, now that uprobes uses user_enable_single_step(current)
we can't simply remove update_debugctlmsr(). So this patch adds
the additional "task == current" check and disables irqs to avoid
the race with interrupts/preemption.

Unfortunately this patch doesn't solve the last problem, we need
another fix. Probably we should teach ptrace_stop() to set/clear
single/block stepping after resume.

And afaics there is yet another problem: perf can play with
MSR_IA32_DEBUGCTLMSR from nmi, this obviously means that even
__switch_to_xtra() has problems.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
      95cf00fa
    • O
      ptrace/x86: Introduce set_task_blockstep() helper · 848e8f5f
      由 Oleg Nesterov 提交于 
      No functional changes, preparation for the next fix and for uprobes
single-step fixes.

Move the code playing with TIF_BLOCKSTEP/DEBUGCTLMSR_BTF into the
new helper, set_task_blockstep().
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      848e8f5f
    • S
      uprobes/x86: Implement x86 specific arch_uprobe_*_step · bdc1e472
      由 Sebastian Andrzej Siewior 提交于 
      The arch specific implementation behaves like user_enable_single_step()
except that it does not disable single stepping if it was already
enabled by ptrace. This allows the debugger to single step over an
uprobe. The state of block stepping is not restored. It makes only sense
together with TF and if that was enabled then the debugger is notified.

Note: this is still not correct. For example, TIF_SINGLESTEP check
is not right, the application itself can set X86_EFLAGS_TF. And otoh
we leak TIF_SINGLESTEP (set by enable) if the probed insn is "popf".
See the next patches, we need the changes in arch/x86/kernel/step.c
first.
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      bdc1e472
    • S
      uprobes: Introduce arch_uprobe_enable/disable_step() · 9d778782
      由 Sebastian Andrzej Siewior 提交于 
      As Oleg pointed out in [0] uprobe should not use the ptrace interface
for enabling/disabling single stepping.

[0] http://lkml.kernel.org/r/20120730141638.GA5306@redhat.com

Add the new "__weak arch" helpers which simply call user_*_single_step()
as a preparation. This is only needed to not break the powerpc port, we
will fold this logic into arch_uprobe_pre/post_xol() hooks later.

We should also change handle_singlestep(), _disable_step(&uprobe->arch)
should be called before put_uprobe().
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      9d778782
    • O
      uprobes: Teach find_active_uprobe() to clear MMF_HAS_UPROBES · 499a4f3e
      由 Oleg Nesterov 提交于 
      The wrong MMF_HAS_UPROBES doesn't really hurt, just it triggers
the "slow" and unnecessary handle_swbp() path if the task hits
the non-uprobe breakpoint.

So this patch changes find_active_uprobe() to check every valid
vma and clear MMF_HAS_UPROBES if no uprobes were found. This is
adds the slow O(n) path, but it is only called in unlikely case
when the task hits the normal breakpoint first time after
uprobe_unregister().

Note the "not strictly accurate" comment in mmf_recalc_uprobes().
We can fix this, we only need to teach vma_has_uprobes() to return
a bit more more info, but I am not sure this worth the trouble.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      499a4f3e
    • O
      uprobes: Introduce MMF_RECALC_UPROBES · 9f68f672
      由 Oleg Nesterov 提交于 
      Add the new MMF_RECALC_UPROBES flag, it means that MMF_HAS_UPROBES
can be false positive after remove_breakpoint() or uprobe_munmap().
It is also set by uprobe_dup_mmap(), this is not optimal but simple.
We could add the new hook, uprobe_dup_vma(), to set MMF_HAS_UPROBES
only if the new mm actually has uprobes, but I don't think this
makes sense.

The next patch will use this flag to clear MMF_HAS_UPROBES.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      9f68f672
    • O
      uprobes: uprobes_treelock should not disable irqs · 6f47caa0
      由 Oleg Nesterov 提交于 
      Nobody plays with uprobes_tree/uprobes_treelock in interrupt context,
no need to disable irqs.
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Acked-by: NSrikar Dronamraju <srikar@linux.vnet.ibm.com>
      6f47caa0