When qgroup tracking is enabled, we do an automatic cycle of the new rescan
mechanism.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

If qgroup tracking is out of sync, a rescan operation can be started. It
iterates the complete extent tree and recalculates all qgroup tracking data.
This is an expensive operation and should not be used unless required.

A filesystem under rescan can still be umounted. The rescan continues on the
next mount.  Status information is provided with a separate ioctl while a
rescan operation is in progress.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The function is separated into a preparation part and the three accounting
steps mentioned in the qgroups documentation. The goal is to make steps two
and three usable by the rescan functionality. A side effect is that the
function is restructured into readable subunits.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

When running the 208th of xfstests, the fs returned the enospc
error when there was lots of free space in the disk.

By bisect debug, we found it was introduced by commit 96f1bb57.
This commit makes the space check for the global reservation in
can_overcommit() be inconsistent with should_alloc_chunk().
can_overcommit() requires that the free space is 2 times the size
of the global reservation, or we can't do overcommit. And instead,
we need reclaim some reserved space, and if we still don't have
enough free space, we need allocate a new chunk. But unfortunately,
should_alloc_chunk() just requires that the free space is 1 time
the size of the global reservation, that is we would not try to
allocate a new chunk if the free space size is in the middle of
these two requires, and just return the enospc error. Fix it.

Cc: Jim Schutt <jaschut@sandia.gov>
Cc: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Sequence numbers for delayed refs have been introduced in the first version
of the qgroup patch set. To solve the problem of find_all_roots on a busy
file system, the tree mod log was introduced. The sequence numbers for that
were simply shared between those two users.

However, at one point in qgroup's quota accounting, there's a statement
accessing the previous sequence number, that's still just doing (seq - 1)
just as it would have to in the very first version.

To satisfy that requirement, this patch makes the sequence number counter 64
bit and splits it into a major part (used for qgroup sequence number
counting) and a minor part (incremented for each tree modification in the
log). This enables us to go exactly one major step backwards, as required
for qgroups, while still incrementing the sequence counter for tree mod log
insertions to keep track of their order. Keeping them in a single variable
means there's no need to change all the code dealing with comparisons of two
sequence numbers.

The sequence number is reset to 0 on commit (not new in this patch), which
ensures we won't overflow the two 32 bit counters.

Without this fix, the qgroup tracking can occasionally go wrong and WARN_ONs
from the tree mod log code may happen.
Signed-off-by: NJan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Clean up the leak debugging in extent_io.c by moving
the debug code into functions.  This also removes the
list_heads used for debugging from the extent_buffer
and extent_state structures when debug is not enabled.

Since we need a global debug config to do that last
part, implement CONFIG_BTRFS_DEBUG to accommodate.

Thanks to Dave Sterba for the Kconfig bit.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Replace some BUG_ONs with proper handling and take allocated space back to
free space cache for later use.

We don't have to worry about extent maps since they'd be freed in releasepage
path.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

It is a rare exception that a new tree is created, like the qgroups
tree. So far these new trees have an all-zero UUID in their root
items. All trees that mkfs.btrfs has created get an UUID during the
first mount when btrfs_read_root_item() rewrites the root_item to
the v2 structure style. These UUID are never used so far, but
anyway, since it is better to have it uniform for all trees, this
commit adds some lines that generate and write an UUID for newly
created trees.
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

fget() returns NULL if error. So, we should check NULL or not.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Variable 'p' is not used any more. So, remove it.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

I have a broken file system that when it aborts leaves all sorts of accounting
things wrong and gives you lots of WARN_ON()'s other than the abort.  This is
because we're not cleaning up various parts of the file system when we abort.
The first chunks are specific to mount failures, we weren't cleaning up the
block group cached inodes and we weren't cleaning up any transactions that had
been aborted, which leaves a bunch of things laying around.

The second half of this are related to the cleanup parts.  First we don't need
to release space for the dirty pages from the trans_block_rsv, that's all
handled by the trans handles so this is just plain wrong.  The other thing is we
need to pin down extents that were set ->must_insert_reserved for delayed refs.
This isn't so much for the pinning but more for the cleaning up the
cache->reserved counter since we are no longer going to use those reserved
bytes.  With this patch I no longer see a bunch of WARN_ON()'s when I try to
mount this broken file system, just the initial one from the abort.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We can just look up the extent_buffers for the range and free stuff that way.
This makes the cleanup a bit cleaner and we can make sure to evict the
extent_buffers pretty quickly by marking them as stale.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We need to check the return value of the commit in case something goes wrong,
otherwise we could end up going down the line and doing more stuff (like orphan
cleanup) before we notice we should have errored out.  We need to do this before
we free up the log_tree_root since the caller will handle all of that.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

This is just obnoxious.  Just print a message, abort the transaction, and return
an error.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We can run the tree logging recovery or the orphan cleanup on mount, so we'll
end up looking up a random fs tree in the meantime.  So we need to clean this up
so we don't leave extent buffers hanging around on the cache.  With this patch
we no longer leak extent buffers on failure to mount.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

This is the same as the fix from commit

Btrfs: fix bad extent logging

but for O_DIRECT.  I missed this when I fixed the problem originally, we were
still using the em for the orig_start and orig_block_len, which would be the
merged extent.  We need to use the actual extent from the on disk file extent
item, which we have to lookup to make sure it's ok to nocow anyway so just pass
in some pointers to hold this info.  Thanks,

Cc: stable@vger.kernel.org
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We kept leaking extent buffers when mounting a broken file system and it turns
out it's because not everybody uses read_tree_block properly.  You need to check
and make sure the extent_buffer is uptodate before you use it.  This patch fixes
everybody who calls read_tree_block directly to make sure they check that it is
uptodate and free it and return an error if it is not.  With this we no longer
leak EB's when things go horribly wrong.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

If we fail to load block groups halfway through we can leave extent_state's on
the excluded tree.  This is because we just lookup the supers and add them to
the excluded tree regardless of which block group we are looking at currently.
This is a problem because we remove the excluded extents for the range of the
block group only, so if we don't ever load a block group for one of the excluded
extents we won't ever free it.  This fixes the problem by only adding excluded
extents if it falls in the block group range we care about.  With this patch
we're no longer leaking space when we fail to read all of the block groups.
Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

With a users corrupted fs I was getting weird behavior and panics and it turns
out it was because one of his tree blocks had a bogus header level.  So add this
to the sanity checks in the endio handler for tree blocks.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

This work is done by btrfs_free_path() anyway so there's no need for this
duplicate work.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

A user sent me a btrfs-image that was panicing because of some corruption.  This
is because we pass in a bogus value to btrfs_num_copies, and it panics.  Instead
just return 1.  We only call btrfs_num_copies to see if there are other copies
to try and read for things, so if we just return 1 it will make the callers exit
out with an appropriate error value.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Martin Steigerwald reported a BUG_ON() where we were given a bogus bytenr to
map.  Turns out he is using > PAGESIZE leafsizes.  The readahead stuff is called
every time we do a completion, but we may not have finished reading in all the
pages, so the bytenr we read off the node could be completely bogus.  Fix this
by only calling the readahead hook once all pages have been read in.  Thanks,
Reported-by: NMartin Steigerwald <Martin@lichtvoll.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Martin Steigerwald reported a BUG_ON() in btrfs_map_block where we didn't find
a chunk for a particular block we were trying to map.  This happened because the
block was bogus.  We shouldn't be BUG_ON()'ing in this case, just print a
message and return an error.  This came from reada_add_block and it appears to
deal with an error fine so we should be good there.  Thanks,
Reported-by: NMartin Steigerwald <Martin@lichtvoll.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We need to tag metadata io with REQ_META to avoid priority inversion when using
io throttling cqroups.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

So I noticed there is an infinite loop in the slow caching code.  If we return 1
when we hit the end of the tree, so we could end up caching the last block group
the slow way and suddenly we're looping forever because we just keep
re-searching and trying again.  Fix this by only doing btrfs_next_leaf() if we
don't need_resched().  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

The locking order for stuff is

__sb_start_write
ordered_mutex

but with sync() we don't do __sb_start_write for some strange reason, which
means that our iput in wait_ordered_extents could start a transaction which does
the __sb_start_write while we're holding the ordered_mutex.  Fix this by using
delayed iput in sync.  Thanks,
Reported-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Since all the quota configurations are loaded in memory, and we can
have ioctl checks before operating in the disk. It is safe to do such
things because qgroup_ioctl_lock is held outside.

Without these extra checks firstly, it should be ok to do user change
for quota operations. For example:

if we want to add an existed qgroup, we will do:
	->add_qgroup_item()
		->add_qgroup_rb()

add_qgroup_item() will return -EEXIST to us, however, qgroups are all
in memory, why not check them in memory firstly.
Signed-off-by: NWang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

ulist_add() may return -ENOMEM, fix missing check about
return value.
Signed-off-by: NWang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

For created snapshots, the full root_item is copied from the source
root and afterwards selectively modified. The current code forgets
to clear the field received_uuid. The only problem is that it is
confusing when you look at it with 'btrfs subv list', since for
writable snapshots, the contents of the snapshot can be completely
unrelated to the previously received snapshot.
The receiver ignores such snapshots anyway because he also checks
the field stransid in the root_item and that value used to be reset
to zero for all created snapshots.

This commit changes two things:
- clear the received_uuid field for new writable snapshots.
- don't clear the send/receive related information like the stransid
  for read-only snapshots (which makes them useable as a parent for
  the automatic selection of parents in the receive code).
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Dave reported a BUG_ON() that happened in end_page_writeback() after an abort.
This happened because we unconditionally call end_page_writeback() in the endio
case, which is right.  However when we abort the transaction we will call
end_page_writeback() on any writeback pages we find, which is wrong.  We need to
lock the page and wait on page writeback to complete if it is.  There is nothing
unsafe about this since we are discarding the transaction anyway.  Thanks,
Reported-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Signed-off-by: NWang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

We need such a sanity check for wrong start when we defrag a file, otherwise,
even with a wrong start that's larger than file size, we can end up changing
not only inode's force compress flag but also FS's incompat flags.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

This fixes the following errors:

  fs/btrfs/reada.c: In function ‘btrfs_reada_wait’:
  fs/btrfs/reada.c:958:42: error: invalid operands to binary < (have ‘atomic_t’ and ‘int’)
  fs/btrfs/reada.c:961:41: error: invalid operands to binary < (have ‘atomic_t’ and ‘int’)
Signed-off-by: NVincent Stehlé <vincent.stehle@laposte.net>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: linux-btrfs@vger.kernel.org
Reviewed-by: NDavid Sterba <dsterba@suse.cz>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Argument 'trans' became unnecessary from setup_inline_extent_backref()
that called btrfs_extend_item().
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Argument 'trans' is not used in btrfs_extend_item().
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

If argument 'trans' is unnecessary in the function where
fixup_low_keys() is called, 'trans' is deleted.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Argument 'trans' is not used in fixup_low_keys(). So, remove it.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

Step to reproduce:
	mkfs.btrfs <disk>
	mount <disk> <mnt>
	dd if=/dev/zero of=/<mnt>/data bs=1M count=10
	sync
	btrfs quota enable <mnt>
	btrfs qgroup create 0/5 <mnt>
	btrfs qgroup limit 5M 0/5 <mnt>
	rm -f /<mnt>/data
	sync
	btrfs qgroup show <mnt>
	dd if=/dev/zero of=data bs=1M count=1

>From the perspective of users, qgroup's referenced or exclusive
is negative,but user can not continue to write data! a workaround
way is to cast u64 to s64 when doing qgroup reservation.
Signed-off-by: NWang Shilong <wangsl-fnst@cn.fujitsu.com>
Reviewed-by: NArne Jansen <sensille@gmx.net>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>

If out of memory happens, we should return -ENOMEM directly to the caller
rather than continue the work.
Signed-off-by: NWang Shilong <wangsl-fnst@cn.fujitsu.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>