Refactored code for channel initialisation and release:
- Do not create device nodes which are not required.
- Better error handling.
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add dvb net device.
Note that the physical address must be setup manually.
Signed-off-by: NRalph Metzler <rjkm@metzlerbros.de>
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Implement shutdown workaround for some chipsets.
Signed-off-by: NRalph Metzler <rjkm@metzlerbros.de>
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Driver for the Common Interface Controller CXD2099AR.
Supports the CI of the cineS2 DVB-S2.

For now, data is passed through '/dev/dvb/adapterX/sec0':
- Encrypted data must be written to 'sec0'.
- Decrypted data can be read from 'sec0'.
- Setup the CAM using device 'ca0'.
Signed-off-by: NRalph Metzler <rjkm@metzlerbros.de>
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Make command timeout workaround configurable,
activate it for firmware version <= 17.
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add MSI support, may be enabled with firmware version 18.
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Start moving the dvb specific code to ngene-dvb.c.  Note that there is still
stuff in ngene-core.c which could potentially be moved out, but it will require
considerable reworking of the logic in order to continue to properly support
DVB while also being able to support transport streams coming from analog MPEG
encoders.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Split out the card profiles into a new file called ngene-cards.c.  This is
part of a larger refactoring of the driver in preparation for adding analog
support.

Note that this patch makes *no* functional change - all I did was cut/paste the
code and add the function prototypes to ngene.h as needed.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Split out the i2c related code from the ngene-core.c into a new file called
ngene-i2c.c.  This is part of a larger refactoring of the driver in preparation
for adding analog support.

Note that this patch makes *no* functional change - all I did was cut/paste the
code and add the function prototypes to ngene.h as needed.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The current code assumes that channel zero is always a TS input, which would
result in an oops if the "one_adapter" modprobe option is 1 (which it is by
default) and the board in question has something else on channel zero (which
is the case for the Avermedia m780, which has it's analog input wired to UVI1)

The code now explicitly tracks the first adapter created and ensures that
other channels cannot accidentially be associated with a NULL adapter.

Also, eliminate what appears to be a typo where all of the channel parameters
are getting associated with stream zero's properties, which will work if you
happen to have a dual stream board with the exact same configuration, but if
they differ then the second stream is going to end up with the first stream's
configuration.
Signed-off-by: NDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Make checkpatch.pl happy.
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove/comment-out unused code, make some functions/declarations static.
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If parameter "one_adapter" is set, only one adapter per device will be attached.
Otherwise an adapter for every frontend will be attached.
Signed-off-by: NMatthias Benesch <twoof7@freenet.de>
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove and disable unnecessary code. Disable define ONE_ADAPTER.
Signed-off-by: NMatthias Benesch <twoof7@freenet.de>
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Remove LNBH21 routines, disable code which broke compilation.
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add Micronas nGene PCIe bridge driver.

The source code was provided by Micronas / Ralph Metzler,
and has been reformatted to comply with Linux Codingstyle.
Signed-off-by: NMatthias Benesch <twoof7@freenet.de>
Signed-off-by: NRalph Metzler <rjkm@metzlerbros.de>
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>