- 07 4月, 2018 20 次提交
-
-
由 Masahiro Yamada 提交于
Clean up these patterns from the top Makefile to omit 'clean-files' in each Makefile. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
These are common patterns where source files are parsed by the asn1_compiler. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Another common pattern that consists of chained commands is to compile a DTB as binary data into the kernel image or a module. It is used in several places in the source tree. Support it in the core Makefile. $(call if_changed,dt_S_dtb) is more suitable than $(call cmd,dt_S_dtb) in case cmd_dt_S_dtb is changed in the future. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NFrank Rowand <frowand.list@gmail.com>
-
由 Masahiro Yamada 提交于
Files generated by if_changed* must be added to 'targets' to include *.cmd files. Otherwise, they would be regenerated every time. The build system automatically adds objects to 'targets' where appropriate, such as obj-y, extra-y, etc. but does nothing for intermediate files. So, each Makefile needs to add them by itself. There are some common cases where objects are generated by chained rules. Lexers and parsers are compiled like follows: %.lex.o <- %.lex.c <- %.l %.tab.o <- %.tab.c <- %.y They are common patterns, so it is reasonable to take care of them in the core Makefile instead of requiring each Makefile to do so. At this moment, you cannot delete 'target += zconf.lex.c' in the Kconfig Makefile because zconf.lex.c is included from zconf.tab.c instead of being compiled separately. It should be deleted after Kconfig is more refactored. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NFrank Rowand <frowand.list@gmail.com>
-
由 Masahiro Yamada 提交于
Now that the kernel build supports flex and bison, remove the _shipped files and generate them during the build instead. There are no more shipped lexer and parser, so I ripped off the rules in scripts/Malefile.lib that were used for REGENERATE_PARSERS. The genksyms parser has ambiguous grammar, which would emit warnings: scripts/genksyms/parse.y: warning: 9 shift/reduce conflicts [-Wconflicts-sr] scripts/genksyms/parse.y: warning: 5 reduce/reduce conflicts [-Wconflicts-rr] They are normally suppressed, but displayed when W=1 is given. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
由 Masahiro Yamada 提交于
Files suffixed by .lex.c, .tab.[ch] are generated lexers, parsers, respectively. Clean them up globally from the top Makefile. Some of the final host programs those lexer/parser are linked into are necessary for building external modules, but the intermediates are unneeded. They can be cleaned away by 'make clean' instead of 'make mrproper'. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NFrank Rowand <frowand.list@gmail.com>
-
由 Masahiro Yamada 提交于
These patterns are common to host programs that require lexer and parser. Move them to the top .gitignore. Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com> Acked-by: NFrank Rowand <frowand.list@gmail.com>
-
由 Robin Jarry 提交于
When compiling executables from a single .c file, the linker is also invoked. Pass the HOSTLDFLAGS like for other linker commands. Signed-off-by: NRobin Jarry <robin.jarry@6wind.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
-
git://github.com/awilliam/linux-vfio由 Linus Torvalds 提交于
Pull VFIO updates from Alex Williamson: - Adopt iommu_unmap_fast() interface to type1 backend (Suravee Suthikulpanit) - mdev sample driver fixup (Shunyong Yang) - More efficient PFN mapping handling in type1 backend (Jason Cai) - VFIO device ioeventfd interface (Alex Williamson) - Tag new vfio-platform sub-maintainer (Alex Williamson) * tag 'vfio-v4.17-rc1' of git://github.com/awilliam/linux-vfio: MAINTAINERS: vfio/platform: Update sub-maintainer vfio/pci: Add ioeventfd support vfio/pci: Use endian neutral helpers vfio/pci: Pull BAR mapping setup from read-write path vfio/type1: Improve memory pinning process for raw PFN mapping vfio-mdev/samples: change RDI interrupt condition vfio/type1: Adopt fast IOTLB flush interface when unmap IOVAs
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost由 Linus Torvalds 提交于
Pull fw_cfg, vhost updates from Michael Tsirkin: "This cleans up the qemu fw cfg device driver. On top of this, vmcore is dumped there on crash to help debugging with kASLR enabled. Also included are some fixes in vhost" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: add vsock compat ioctl vhost: fix vhost ioctl signature to build with clang fw_cfg: write vmcoreinfo details crash: export paddr_vmcoreinfo_note() fw_cfg: add DMA register fw_cfg: add a public uapi header fw_cfg: handle fw_cfg_read_blob() error fw_cfg: remove inline from fw_cfg_read_blob() fw_cfg: fix sparse warnings around FW_CFG_FILE_DIR read fw_cfg: fix sparse warning reading FW_CFG_ID fw_cfg: fix sparse warnings with fw_cfg_file fw_cfg: fix sparse warnings in fw_cfg_sel_endianness() ptr_ring: fix build
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI updates from Bjorn Helgaas: - move pci_uevent_ers() out of pci.h (Michael Ellerman) - skip ASPM common clock warning if BIOS already configured it (Sinan Kaya) - fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva) - remove last user of pci_get_bus_and_slot() and the function itself (Sinan Kaya) - add decoding for 16 GT/s link speed (Jay Fang) - add interfaces to get max link speed and width (Tal Gilboa) - add pcie_bandwidth_capable() to compute max supported link bandwidth (Tal Gilboa) - add pcie_bandwidth_available() to compute bandwidth available to device (Tal Gilboa) - add pcie_print_link_status() to log link speed and whether it's limited (Tal Gilboa) - use PCI core interfaces to report when device performance may be limited by its slot instead of doing it in each driver (Tal Gilboa) - fix possible cpqphp NULL pointer dereference (Shawn Lin) - rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI hotplug (Mika Westerberg) - add support for PCI I/O port space that's neither directly accessible via CPU in/out instructions nor directly mapped into CPU physical memory space. This is fairly intrusive and includes minor changes to interfaces used for I/O space on most platforms (Zhichang Yuan, John Garry) - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan, John Garry) - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas) - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr() (Shawn Lin) - report quirk timings with dev_info (Bjorn Helgaas) - report quirks that take longer than 10ms (Bjorn Helgaas) - add and use Altera Vendor ID (Johannes Thumshirn) - tidy Makefiles and comments (Bjorn Helgaas) - don't set up INTx if MSI or MSI-X is enabled to align cris, frv, ia64, and mn10300 with x86 (Bjorn Helgaas) - move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick Lawler) - merge pcieport_if.h into portdrv.h (Bjorn Helgaas) - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn Helgaas) - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas) - remove portdrv link order dependency (Bjorn Helgaas) - remove support for unused VC portdrv service (Bjorn Helgaas) - simplify portdrv feature permission checking (Bjorn Helgaas) - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn Helgaas) - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas) - use cached AER capability offset (Frederick Lawler) - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg) - rename pcie-dpc.c to dpc.c (Bjorn Helgaas) - use generic pci_mmap_resource_range() instead of powerpc and xtensa arch-specific versions (David Woodhouse) - support arbitrary PCI host bridge offsets on sparc (Yinghai Lu) - remove System and Video ROM reservations on sparc (Bjorn Helgaas) - probe for device reset support during enumeration instead of runtime (Bjorn Helgaas) - add ACS quirk for Ampere (née APM) root ports (Feng Kan) - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas Vincent-Cross) - protect device restore with device lock (Sinan Kaya) - handle failure of FLR gracefully (Sinan Kaya) - handle CRS (config retry status) after device resets (Sinan Kaya) - skip various config reads for SR-IOV VFs as an optimization (KarimAllah Ahmed) - consolidate VPD code in vpd.c (Bjorn Helgaas) - add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann) - add DT support for R-Car r8a7743 (Biju Das) - fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host bridge driver that causes a general protection fault (Dexuan Cui) - fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV (Dexuan Cui) - fix Hyper-V host bridge hang when ejecting a VF before setting up MSI (Dexuan Cui) - make several structures static (Fengguang Wu) - increase number of MSI IRQs supported by Synopsys DesignWare bridges from 32 to 256 (Gustavo Pimentel) - implemented multiplexed IRQ domain API and remove obsolete MSI IRQ API from DesignWare drivers (Gustavo Pimentel) - add Tegra power management support (Manikanta Maddireddy) - add Tegra loadable module support (Manikanta Maddireddy) - handle 64-bit BARs correctly in endpoint support (Niklas Cassel) - support optional regulator for HiSilicon STB (Shawn Guo) - use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla) - support power supplies for Qualcomm msm8996 (Srinivas Kandagatla) * tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits) MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver HISI LPC: Add ACPI support ACPI / scan: Do not enumerate Indirect IO host children ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings of: Add missing I/O range exception for indirect-IO devices PCI: Apply the new generic I/O management on PCI IO hosts PCI: Add fwnode handler as input param of pci_register_io_range() PCI: Remove __weak tag from pci_register_io_range() MAINTAINERS: Add missing /drivers/pci/cadence directory entry fm10k: Report PCIe link properties with pcie_print_link_status() net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth net/mlx5: Report PCIe link properties with pcie_print_link_status() net/mlx4_core: Report PCIe link properties with pcie_print_link_status() PCI: Add pcie_print_link_status() to log link speed and whether it's limited PCI: Add pcie_bandwidth_available() to compute bandwidth available to device misc: pci_endpoint_test: Handle 64-bit BARs properly PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma由 Linus Torvalds 提交于
Pull rdma updates from Jason Gunthorpe: "Doug and I are at a conference next week so if another PR is sent I expect it to only be bug fixes. Parav noted yesterday that there are some fringe case behavior changes in his work that he would like to fix, and I see that Intel has a number of rc looking patches for HFI1 they posted yesterday. Parav is again the biggest contributor by patch count with his ongoing work to enable container support in the RDMA stack, followed by Leon doing syzkaller inspired cleanups, though most of the actual fixing went to RC. There is one uncomfortable series here fixing the user ABI to actually work as intended in 32 bit mode. There are lots of notes in the commit messages, but the basic summary is we don't think there is an actual 32 bit kernel user of drivers/infiniband for several good reasons. However we are seeing people want to use a 32 bit user space with 64 bit kernel, which didn't completely work today. So in fixing it we required a 32 bit rxe user to upgrade their userspace. rxe users are still already quite rare and we think a 32 bit one is non-existing. - Fix RDMA uapi headers to actually compile in userspace and be more complete - Three shared with netdev pull requests from Mellanox: * 7 patches, mostly to net with 1 IB related one at the back). This series addresses an IRQ performance issue (patch 1), cleanups related to the fix for the IRQ performance problem (patches 2-6), and then extends the fragmented completion queue support that already exists in the net side of the driver to the ib side of the driver (patch 7). * Mostly IB, with 5 patches to net that are needed to support the remaining 10 patches to the IB subsystem. This series extends the current 'representor' framework when the mlx5 driver is in switchdev mode from being a netdev only construct to being a netdev/IB dev construct. The IB dev is limited to raw Eth queue pairs only, but by having an IB dev of this type attached to the representor for a switchdev port, it enables DPDK to work on the switchdev device. * All net related, but needed as infrastructure for the rdma driver - Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers - SRP performance updates - IB uverbs write path cleanup patch series from Leon - Add RDMA_CM support to ib_srpt. This is disabled by default. Users need to set the port for ib_srpt to listen on in configfs in order for it to be enabled (/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port) - TSO and Scatter FCS support in mlx4 - Refactor of modify_qp routine to resolve problems seen while working on new code that is forthcoming - More refactoring and updates of RDMA CM for containers support from Parav - mlx5 'fine grained packet pacing', 'ipsec offload' and 'device memory' user API features - Infrastructure updates for the new IOCTL interface, based on increased usage - ABI compatibility bug fixes to fully support 32 bit userspace on 64 bit kernel as was originally intended. See the commit messages for extensive details - Syzkaller bugs and code cleanups motivated by them" * tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (199 commits) IB/rxe: Fix for oops in rxe_register_device on ppc64le arch IB/mlx5: Device memory mr registration support net/mlx5: Mkey creation command adjustments IB/mlx5: Device memory support in mlx5_ib net/mlx5: Query device memory capabilities IB/uverbs: Add device memory registration ioctl support IB/uverbs: Add alloc/free dm uverbs ioctl support IB/uverbs: Add device memory capabilities reporting IB/uverbs: Expose device memory capabilities to user RDMA/qedr: Fix wmb usage in qedr IB/rxe: Removed GID add/del dummy routines RDMA/qedr: Zero stack memory before copying to user space IB/mlx5: Add ability to hash by IPSEC_SPI when creating a TIR IB/mlx5: Add information for querying IPsec capabilities IB/mlx5: Add IPsec support for egress and ingress {net,IB}/mlx5: Add ipsec helper IB/mlx5: Add modify_flow_action_esp verb IB/mlx5: Add implementation for create and destroy action_xfrm IB/uverbs: Introduce ESP steering match filter IB/uverbs: Add modify ESP flow_action ...
-
git://git.linaro.org/landing-teams/working/fujitsu/integration由 Linus Torvalds 提交于
Pull mailbox updates from Jassi Brar: - New Hi3660 mailbox driver - Fix TEGRA Kconfig warning - Broadcom: use dma_pool_zalloc instead of dma_pool_alloc+memset * tag 'mailbox-v4.17' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: Add support for Hi3660 mailbox dt-bindings: mailbox: Introduce Hi3660 controller binding mailbox: tegra: relax TEGRA_HSP_MBOX Kconfig dependencies maillbox: bcm-flexrm-mailbox: Use dma_pool_zalloc()
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux由 Linus Torvalds 提交于
Pull SELinux updates from Paul Moore: "A bigger than usual pull request for SELinux, 13 patches (lucky!) along with a scary looking diffstat. Although if you look a bit closer, excluding the usual minor tweaks/fixes, there are really only two significant changes in this pull request: the addition of proper SELinux access controls for SCTP and the encapsulation of a lot of internal SELinux state. The SCTP changes are the result of a multi-month effort (maybe even a year or longer?) between the SELinux folks and the SCTP folks to add proper SELinux controls. A special thanks go to Richard for seeing this through and keeping the effort moving forward. The state encapsulation work is a bit of janitorial work that came out of some early work on SELinux namespacing. The question of namespacing is still an open one, but I believe there is some real value in the encapsulation work so we've split that out and are now sending that up to you" * tag 'selinux-pr-20180403' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: wrap AVC state selinux: wrap selinuxfs state selinux: fix handling of uninitialized selinux state in get_bools/classes selinux: Update SELinux SCTP documentation selinux: Fix ltp test connect-syscall failure selinux: rename the {is,set}_enforcing() functions selinux: wrap global selinux state selinux: fix typo in selinux_netlbl_sctp_sk_clone declaration selinux: Add SCTP support sctp: Add LSM hooks sctp: Add ip option support security: Add support for SCTP security hooks netlabel: If PF_INET6, check sk_buff ip header version
-
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit由 Linus Torvalds 提交于
Pull audit updates from Paul Moore: "We didn't have anything to send for v4.16, but we're back with a little more than usual for v4.17. Eleven patches in total, most fall into the small fix category, but there are three non-trivial changes worth calling out: - the audit entry filter is being removed after deprecating it for quite a while (years of no one really using it because it turns out to be not very practical) - created our own version of "__mutex_owner()" because the locking folks were upset we were using theirs - improved our handling of kernel command line parameters to make them more forgiving - we fixed auditing of symlink operations Everything passes the audit-testsuite and as of a few minutes ago it merges well with your tree" * tag 'audit-pr-20180403' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: audit: add refused symlink to audit_names audit: remove path param from link denied function audit: link denied should not directly generate PATH record audit: make ANOM_LINK obey audit_enabled and audit_dummy_context audit: do not panic on invalid boot parameter audit: track the owner of the command mutex ourselves audit: return on memory error to avoid null pointer dereference audit: bail before bug check if audit disabled audit: deprecate the AUDIT_FILTER_ENTRY filter audit: session ID should not set arch quick field pointer audit: update bugtracker and source URIs
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux由 Linus Torvalds 提交于
Pull pstore updates from Kees Cook: "This cycle was almost entirely improvements to the pstore compression options, noted below: - Add lz4hc and 842 to pstore compression options (Geliang Tang) - Refactor to use crypto compression API (Geliang Tang) - Fix up Kconfig dependencies for compression (Arnd Bergmann) - Allow for run-time compression selection - Remove stack VLA usage" * tag 'pstore-v4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: pstore: fix crypto dependencies pstore: Use crypto compress API pstore/ram: Do not use stack VLA for parity workspace pstore: Select compression at runtime pstore: Avoid size casts for 842 compression pstore: Add lz4hc and 842 compression support
-
由 Linus Torvalds 提交于
Merge updates from Andrew Morton: - a few misc things - ocfs2 updates - the v9fs maintainers have been missing for a long time. I've taken over v9fs patch slinging. - most of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (116 commits) mm,oom_reaper: check for MMF_OOM_SKIP before complaining mm/ksm: fix interaction with THP mm/memblock.c: cast constant ULLONG_MAX to phys_addr_t headers: untangle kmemleak.h from mm.h include/linux/mmdebug.h: make VM_WARN* non-rvals mm/page_isolation.c: make start_isolate_page_range() fail if already isolated mm: change return type to vm_fault_t mm, oom: remove 3% bonus for CAP_SYS_ADMIN processes mm, page_alloc: wakeup kcompactd even if kswapd cannot free more memory kernel/fork.c: detect early free of a live mm mm: make counting of list_lru_one::nr_items lockless mm/swap_state.c: make bool enable_vma_readahead and swap_vma_readahead() static block_invalidatepage(): only release page if the full page was invalidated mm: kernel-doc: add missing parameter descriptions mm/swap.c: remove @cold parameter description for release_pages() mm/nommu: remove description of alloc_vm_area zram: drop max_zpage_size and use zs_huge_class_size() zsmalloc: introduce zs_huge_class_size() mm: fix races between swapoff and flush dcache fs/direct-io.c: minor cleanups in do_blockdev_direct_IO ...
-
git://git.infradead.org/linux-mtd由 Linus Torvalds 提交于
Pull MTD updates from Boris Brezillon: "MTD Core: - Remove support for asynchronous erase (not implemented by any of the existing drivers anyway) - Remove Cyrille from the list of SPI NOR and MTD maintainers - Fix kernel doc headers - Allow users to define the partitions parsers they want to test through a DT property (compatible of the partitions subnode) - Remove the bfin-async-flash driver (the only architecture using it has been removed) - Fix pagetest test - Add extra checks in mtd_erase() - Simplify the MTD partition creation logic and get rid of mtd_add_device_partitions() MTD Drivers: - Add endianness information to the physmap DT binding - Add Eon EN29LV400A IDs to JEDEC probe logic - Use %*ph where appropriate SPI NOR Drivers: - Make fsl-quaspi assign different names to MTD devices connected to the same QSPI controller - Remove an unneeded driver.bus assigned in the fsl-qspi driver NAND Core: - Prepare arrival of the SPI NAND subsystem by implementing a generic (interface-agnostic) layer to ease manipulation of NAND devices - Move onenand code base to the drivers/mtd/nand/ dir - Rework timing mode selection - Provide a generic way for NAND chip drivers to flag a specific GET/SET FEATURE operation as supported/unsupported - Stop embedding ONFI/JEDEC param page in nand_chip NAND Drivers: - Rework/cleanup of the mxc driver - Various cleanups in the vf610 driver - Migrate the fsmc and vf610 to ->exec_op() - Get rid of the pxa driver (replaced by marvell_nand) - Support ->setup_data_interface() in the GPMI driver - Fix probe error path in several drivers - Remove support for unused hw_syndrome mode in sunxi_nand - Various minor improvements" * tag 'mtd/for-4.17' of git://git.infradead.org/linux-mtd: (89 commits) dt-bindings: fsl-quadspi: Add the example of two SPI NOR mtd: fsl-quadspi: Distinguish the mtd device names mtd: nand: Fix some function description mismatches in core.c mtd: fsl-quadspi: Remove unneeded driver.bus assignment mtd: rawnand: marvell: Rename ->ecc_clk into ->core_clk mtd: rawnand: s3c2410: enhance the probe function error path mtd: rawnand: tango: fix probe function error path mtd: rawnand: sh_flctl: fix the probe function error path mtd: rawnand: omap2: fix the probe function error path mtd: rawnand: mxc: fix probe function error path mtd: rawnand: denali: fix probe function error path mtd: rawnand: davinci: fix probe function error path mtd: rawnand: cafe: fix probe function error path mtd: rawnand: brcmnand: fix probe function error path mtd: rawnand: sunxi: Stop supporting ECC_HW_SYNDROME mode mtd: rawnand: marvell: Fix clock resource by adding a register clock mtd: ftl: Use DIV_ROUND_UP() mtd: Fix some function description mismatches in mtdcore.c mtd: physmap_of: update struct map_info's swap as per map requirement dt-bindings: mtd-physmap: Add endianness supports ...
-
由 Linus Torvalds 提交于
Merge tag 'for-4.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper updates from Mike Snitzer: - DM core passthrough ioctl fix to retain reference to DM table, and that table's block devices, while issuing the ioctl to one of those block devices. - DM core passthrough ioctl fix to _not_ override the fmode_t used to issue the ioctl. Overriding by using the fmode_t that the block device was originally open with during DM table load is a liability. - Add DM core support for secure erase forwarding and update the DM linear and DM striped targets to support them. - A DM core 4.16 stable fix to allow abnormal IO (e.g. discard, write same, write zeroes) for targets that make use of the non-splitting IO variant (as is done for multipath or thinp when layered directly on NVMe). - Allow DM targets to return a payload in response to a DM message that they are sent. This is useful for DM targets that would like to provide statistics data in response to DM messages. - Update DM bufio to support non-power-of-2 block sizes. Numerous other related changes prepare the DM bufio code for this support. - Fix DM crypt to use a bounded amount of memory across the entire system. This is to avoid OOM that can otherwise occur in response to certain pathological IO workloads (e.g. discarding a large DM crypt device). - Add a 'check_at_most_once' feature to the DM verity target to allow verity to be used on mobile devices that have very limited resources. - Fix the DM integrity target to fail early if a keyed algorithm (e.g. HMAC) is to be used but the key isn't set. - Add non-power-of-2 support to the DM unstripe target. - Eliminate the use of a Variable Length Array in the DM stripe target. - Update the DM log-writes target to record metadata (REQ_META flag). - DM raid fixes for its nosync status and some variable range issues. * tag 'for-4.17/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (28 commits) dm: remove fmode_t argument from .prepare_ioctl hook dm: hold DM table for duration of ioctl rather than use blkdev_get dm raid: fix parse_raid_params() variable range issue dm verity: make verity_for_io_block static dm verity: add 'check_at_most_once' option to only validate hashes once dm bufio: don't embed a bio in the dm_buffer structure dm bufio: support non-power-of-two block sizes dm bufio: use slab cache for dm_buffer structure allocations dm bufio: reorder fields in dm_buffer structure dm bufio: relax alignment constraint on slab cache dm bufio: remove code that merges slab caches dm bufio: get rid of slab cache name allocations dm bufio: move dm-bufio.h to include/linux/ dm bufio: delete outdated comment dm: add support for secure erase forwarding dm: backfill abnormal IO support to non-splitting IO submission dm raid: fix nosync status dm mpath: use DM_MAPIO_SUBMITTED instead of magic number 0 in process_queued_bios() dm stripe: get rid of a Variable Length Array (VLA) dm log writes: record metadata flag for better flags record ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull misc vfs updates from Al Viro: "Assorted stuff, including Christoph's I_DIRTY patches" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: move I_DIRTY_INODE to fs.h ubifs: fix bogus __mark_inode_dirty(I_DIRTY_SYNC | I_DIRTY_DATASYNC) call ntfs: fix bogus __mark_inode_dirty(I_DIRTY_SYNC | I_DIRTY_DATASYNC) call gfs2: fix bogus __mark_inode_dirty(I_DIRTY_SYNC | I_DIRTY_DATASYNC) calls fs: fold open_check_o_direct into do_dentry_open vfs: Replace stray non-ASCII homoglyph characters with their ASCII equivalents vfs: make sure struct filename->iname is word-aligned get rid of pointless includes of fs_struct.h [poll] annotate SAA6588_CMD_POLL users
-
- 06 4月, 2018 20 次提交
-
-
由 Bjorn Helgaas 提交于
* lorenzo/pci/cadence: MAINTAINERS: Add missing /drivers/pci/cadence directory entry
-
由 Tetsuo Handa 提交于
I got "oom_reaper: unable to reap pid:" messages when the victim thread was blocked inside free_pgtables() (which occurred after returning from unmap_vmas() and setting MMF_OOM_SKIP). We don't need to complain when exit_mmap() already set MMF_OOM_SKIP. Killed process 7558 (a.out) total-vm:4176kB, anon-rss:84kB, file-rss:0kB, shmem-rss:0kB oom_reaper: unable to reap pid:7558 (a.out) a.out D13272 7558 6931 0x00100084 Call Trace: schedule+0x2d/0x80 rwsem_down_write_failed+0x2bb/0x440 call_rwsem_down_write_failed+0x13/0x20 down_write+0x49/0x60 unlink_file_vma+0x28/0x50 free_pgtables+0x36/0x100 exit_mmap+0xbb/0x180 mmput+0x50/0x110 copy_process.part.41+0xb61/0x1fe0 _do_fork+0xe6/0x560 do_syscall_64+0x74/0x230 entry_SYSCALL_64_after_hwframe+0x42/0xb7 Link: http://lkml.kernel.org/r/201803221946.DHG65638.VFJHFtOSQLOMOF@I-love.SAKURA.ne.jpSigned-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: NDavid Rientjes <rientjes@google.com> Acked-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Claudio Imbrenda 提交于
This patch fixes a corner case for KSM. When two pages belong or belonged to the same transparent hugepage, and they should be merged, KSM fails to split the page, and therefore no merging happens. This bug can be reproduced by: * making sure ksm is running (in case disabling ksmtuned) * enabling transparent hugepages * allocating a THP-aligned 1-THP-sized buffer e.g. on amd64: posix_memalign(&p, 1<<21, 1<<21) * filling it with the same values e.g. memset(p, 42, 1<<21) * performing madvise to make it mergeable e.g. madvise(p, 1<<21, MADV_MERGEABLE) * waiting for KSM to perform a few scans The expected outcome is that the all the pages get merged (1 shared and the rest sharing); the actual outcome is that no pages get merged (1 unshared and the rest volatile) The reason of this behaviour is that we increase the reference count once for both pages we want to merge, but if they belong to the same hugepage (or compound page), the reference counter used in both cases is the one of the head of the compound page. This means that split_huge_page will find a value of the reference counter too high and will fail. This patch solves this problem by testing if the two pages to merge belong to the same hugepage when attempting to merge them. If so, the hugepage is split safely. This means that the hugepage is not split if not necessary. Link: http://lkml.kernel.org/r/1521548069-24758-1-git-send-email-imbrenda@linux.vnet.ibm.comSigned-off-by: NClaudio Imbrenda <imbrenda@linux.vnet.ibm.com> Co-authored-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Hugh Dickins <hughd@google.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stefan Agner 提交于
This fixes a warning shown when phys_addr_t is 32-bit int when compiling with clang: mm/memblock.c:927:15: warning: implicit conversion from 'unsigned long long' to 'phys_addr_t' (aka 'unsigned int') changes value from 18446744073709551615 to 4294967295 [-Wconstant-conversion] r->base : ULLONG_MAX; ^~~~~~~~~~ ./include/linux/kernel.h:30:21: note: expanded from macro 'ULLONG_MAX' #define ULLONG_MAX (~0ULL) ^~~~~ Link: http://lkml.kernel.org/r/20180319005645.29051-1-stefan@agner.chSigned-off-by: NStefan Agner <stefan@agner.ch> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Pavel Tatashin <pasha.tatashin@oracle.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Currently <linux/slab.h> #includes <linux/kmemleak.h> for no obvious reason. It looks like it's only a convenience, so remove kmemleak.h from slab.h and add <linux/kmemleak.h> to any users of kmemleak_* that don't already #include it. Also remove <linux/kmemleak.h> from source files that do not use it. This is tested on i386 allmodconfig and x86_64 allmodconfig. It would be good to run it through the 0day bot for other $ARCHes. I have neither the horsepower nor the storage space for the other $ARCHes. Update: This patch has been extensively build-tested by both the 0day bot & kisskb/ozlabs build farms. Both of them reported 2 build failures for which patches are included here (in v2). [ slab.h is the second most used header file after module.h; kernel.h is right there with slab.h. There could be some minor error in the counting due to some #includes having comments after them and I didn't combine all of those. ] [akpm@linux-foundation.org: security/keys/big_key.c needs vmalloc.h, per sfr] Link: http://lkml.kernel.org/r/e4309f98-3749-93e1-4bb7-d9501a39d015@infradead.org Link: http://kisskb.ellerman.id.au/kisskb/head/13396/Signed-off-by: NRandy Dunlap <rdunlap@infradead.org> Reviewed-by: NIngo Molnar <mingo@kernel.org> Reported-by: Michael Ellerman <mpe@ellerman.id.au> [2 build failures] Reported-by: Fengguang Wu <fengguang.wu@intel.com> [2 build failures] Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Wei Yongjun <weiyongjun1@huawei.com> Cc: Luis R. Rodriguez <mcgrof@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: John Johansen <john.johansen@canonical.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
At present the construct if (VM_WARN(...)) will compile OK with CONFIG_DEBUG_VM=y and will fail with CONFIG_DEBUG_VM=n. The reason is that VM_{WARN,BUG}* have always been special wrt. {WARN/BUG}* and never generate any code when DEBUG_VM is disabled. So we cannot really use it in conditionals. We considered changing things so that this construct works in both cases but that might cause unwanted code generation with CONFIG_DEBUG_VM=n. It is safer and simpler to make the build fail in both cases. [akpm@linux-foundation.org: changelog] Signed-off-by: NMichal Hocko <mhocko@suse.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Kravetz 提交于
start_isolate_page_range() is used to set the migrate type of a set of pageblocks to MIGRATE_ISOLATE while attempting to start a migration operation. It assumes that only one thread is calling it for the specified range. This routine is used by CMA, memory hotplug and gigantic huge pages. Each of these users synchronize access to the range within their subsystem. However, two subsystems (CMA and gigantic huge pages for example) could attempt operations on the same range. If this happens, one thread may 'undo' the work another thread is doing. This can result in pageblocks being incorrectly left marked as MIGRATE_ISOLATE and therefore not available for page allocation. What is ideally needed is a way to synchronize access to a set of pageblocks that are undergoing isolation and migration. The only thing we know about these pageblocks is that they are all in the same zone. A per-node mutex is too coarse as we want to allow multiple operations on different ranges within the same zone concurrently. Instead, we will use the migration type of the pageblocks themselves as a form of synchronization. start_isolate_page_range sets the migration type on a set of page- blocks going in order from the one associated with the smallest pfn to the largest pfn. The zone lock is acquired to check and set the migration type. When going through the list of pageblocks check if MIGRATE_ISOLATE is already set. If so, this indicates another thread is working on this pageblock. We know exactly which pageblocks we set, so clean up by undo those and return -EBUSY. This allows start_isolate_page_range to serve as a synchronization mechanism and will allow for more general use of callers making use of these interfaces. Update comments in alloc_contig_range to reflect this new functionality. Each CPU holds the associated zone lock to modify or examine the migration type of a pageblock. And, it will only examine/update a single pageblock per lock acquire/release cycle. Link: http://lkml.kernel.org/r/20180309224731.16978-1-mike.kravetz@oracle.comSigned-off-by: NMike Kravetz <mike.kravetz@oracle.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Luiz Capitulino <lcapitulino@redhat.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Souptick Joarder 提交于
The plan for these patches is to introduce the typedef, initially just as documentation ("These functions should return a VM_FAULT_ status"). We'll trickle the patches to individual drivers/filesystems in through the maintainers, as far as possible. Then we'll change the typedef to an unsigned int and break the compilation of any unconverted drivers/filesystems. vmf_insert_page(), vmf_insert_mixed() and vmf_insert_pfn() are three newly added functions. The various drivers/filesystems where return value of fault(), huge_fault(), page_mkwrite() and pfn_mkwrite() get converted, will need them. These functions will return correct VM_FAULT_ code based on err value. We've had bugs before where drivers returned -EFOO. And we have this silly inefficiency where vm_insert_xxx() return an errno which (afaict) every driver then converts into a VM_FAULT code. In many cases drivers failed to return correct VM_FAULT code value despite of vm_insert_xxx() fails. We have indentified and clean up all those existing bugs and silly inefficiencies in driver/filesystems by adding these three new inline wrappers. As mentioned above, we will trickle those patches to individual drivers/filesystems in through maintainers after these three wrapper functions are merged. Eventually we can convert vm_insert_xxx() into vmf_insert_xxx() and remove these inline wrappers, but these are a good intermediate step. Link: http://lkml.kernel.org/r/20180310162351.GA7422@jordon-HP-15-Notebook-PCSigned-off-by: NSouptick Joarder <jrdr.linux@gmail.com> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
Since the 2.6 kernel, the oom killer has slightly biased away from CAP_SYS_ADMIN processes by discounting some of its memory usage in comparison to other processes. This has always been implicit and nothing exactly relies on the behavior. Gaurav notices that __task_cred() can dereference a potentially freed pointer if the task under consideration is exiting because a reference to the task_struct is not held. Remove the CAP_SYS_ADMIN bias so that all processes are treated equally. If any CAP_SYS_ADMIN process would like to be biased against, it is always allowed to adjust /proc/pid/oom_score_adj. Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1803071548510.6996@chino.kir.corp.google.comSigned-off-by: NDavid Rientjes <rientjes@google.com> Reported-by: NGaurav Kohli <gkohli@codeaurora.org> Acked-by: NMichal Hocko <mhocko@suse.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
Kswapd will not wakeup if per-zone watermarks are not failing or if too many previous attempts at background reclaim have failed. This can be true if there is a lot of free memory available. For high- order allocations, kswapd is responsible for waking up kcompactd for background compaction. If the zone is not below its watermarks or reclaim has recently failed (lots of free memory, nothing left to reclaim), kcompactd does not get woken up. When __GFP_DIRECT_RECLAIM is not allowed, allow kcompactd to still be woken up even if kswapd will not reclaim. This allows high-order allocations, such as thp, to still trigger background compaction even when the zone has an abundance of free memory. Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1803111659420.209721@chino.kir.corp.google.comSigned-off-by: NDavid Rientjes <rientjes@google.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@techsingularity.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mark Rutland 提交于
KASAN splats indicate that in some cases we free a live mm, then continue to access it, with potentially disastrous results. This is likely due to a mismatched mmdrop() somewhere in the kernel, but so far the culprit remains elusive. Let's have __mmdrop() verify that the mm isn't live for the current task, similar to the existing check for init_mm. This way, we can catch this class of issue earlier, and without requiring KASAN. Currently, idle_task_exit() leaves active_mm stale after it switches to init_mm. This isn't harmful, but will trigger the new assertions, so we must adjust idle_task_exit() to update active_mm. Link: http://lkml.kernel.org/r/20180312140103.19235-1-mark.rutland@arm.comSigned-off-by: NMark Rutland <mark.rutland@arm.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Kirill Tkhai 提交于
During the reclaiming slab of a memcg, shrink_slab iterates over all registered shrinkers in the system, and tries to count and consume objects related to the cgroup. In case of memory pressure, this behaves bad: I observe high system time and time spent in list_lru_count_one() for many processes on RHEL7 kernel. This patch makes list_lru_node::memcg_lrus rcu protected, that allows to skip taking spinlock in list_lru_count_one(). Shakeel Butt with the patch observes significant perf graph change. He says: ======================================================================== Setup: running a fork-bomb in a memcg of 200MiB on a 8GiB and 4 vcpu VM and recording the trace with 'perf record -g -a'. The trace without the patch: + 34.19% fb.sh [kernel.kallsyms] [k] queued_spin_lock_slowpath + 30.77% fb.sh [kernel.kallsyms] [k] _raw_spin_lock + 3.53% fb.sh [kernel.kallsyms] [k] list_lru_count_one + 2.26% fb.sh [kernel.kallsyms] [k] super_cache_count + 1.68% fb.sh [kernel.kallsyms] [k] shrink_slab + 0.59% fb.sh [kernel.kallsyms] [k] down_read_trylock + 0.48% fb.sh [kernel.kallsyms] [k] _raw_spin_unlock_irqrestore + 0.38% fb.sh [kernel.kallsyms] [k] shrink_node_memcg + 0.32% fb.sh [kernel.kallsyms] [k] queue_work_on + 0.26% fb.sh [kernel.kallsyms] [k] count_shadow_nodes With the patch: + 0.16% swapper [kernel.kallsyms] [k] default_idle + 0.13% oom_reaper [kernel.kallsyms] [k] mutex_spin_on_owner + 0.05% perf [kernel.kallsyms] [k] copy_user_generic_string + 0.05% init.real [kernel.kallsyms] [k] wait_consider_task + 0.05% kworker/0:0 [kernel.kallsyms] [k] finish_task_switch + 0.04% kworker/2:1 [kernel.kallsyms] [k] finish_task_switch + 0.04% kworker/3:1 [kernel.kallsyms] [k] finish_task_switch + 0.04% kworker/1:0 [kernel.kallsyms] [k] finish_task_switch + 0.03% binary [kernel.kallsyms] [k] copy_page ======================================================================== Thanks Shakeel for the testing. [ktkhai@virtuozzo.com: v2] Link: http://lkml.kernel.org/r/151203869520.3915.2587549826865799173.stgit@localhost.localdomain Link: http://lkml.kernel.org/r/150583358557.26700.8490036563698102569.stgit@localhost.localdomainSigned-off-by: NKirill Tkhai <ktkhai@virtuozzo.com> Tested-by: NShakeel Butt <shakeelb@google.com> Acked-by: NVladimir Davydov <vdavydov.dev@gmail.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Colin Ian King 提交于
The bool enable_vma_readahead and swap_vma_readahead() are local to the source and do not need to be in global scope, so make them static. Cleans up sparse warnings: mm/swap_state.c:41:6: warning: symbol 'enable_vma_readahead' was not declared. Should it be static? mm/swap_state.c:742:13: warning: symbol 'swap_vma_readahead' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20180223164852.5159-1-colin.king@canonical.comSigned-off-by: NColin Ian King <colin.king@canonical.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Acked-by: N"Huang, Ying" <ying.huang@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeff Moyer 提交于
Prior to commit d47992f8 ("mm: change invalidatepage prototype to accept length"), an offset of 0 meant that the full page was being invalidated. After that commit, we need to instead check the length. Jan said: : : The only possible issue is that try_to_release_page() was called more : often than necessary. Otherwise the issue is harmless but still it's good : to have this fixed. Link: http://lkml.kernel.org/r/x49fu5rtnzs.fsf@segfault.boston.devel.redhat.com Fixes: d47992f8 ("mm: change invalidatepage prototype to accept length") Signed-off-by: NJeff Moyer <jmoyer@redhat.com> Reviewed-by: NJan Kara <jack@suse.cz> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
Link: http://lkml.kernel.org/r/1519585191-10180-4-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
The 'cold' parameter was removed from release_pages function by commit c6f92f9f ("mm: remove cold parameter for release_pages"). Update the description to match the code. Link: http://lkml.kernel.org/r/1519585191-10180-3-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mike Rapoport 提交于
The alloc_mm_area in nommu is a stub, but its description states it allocates kernel address space. Remove the description to make the code and the documentation agree. Link: http://lkml.kernel.org/r/1519585191-10180-2-git-send-email-rppt@linux.vnet.ibm.comSigned-off-by: NMike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sergey Senozhatsky 提交于
Remove ZRAM's enforced "huge object" value and use zsmalloc huge-class watermark instead, which makes more sense. TEST - I used a 1G zram device, LZO compression back-end, original data set size was 444MB. Looking at zsmalloc classes stats the test ended up to be pretty fair. BASE ZRAM/ZSMALLOC ===================== zram mm_stat 498978816 191482495 199831552 0 199831552 15634 0 zsmalloc classes class size almost_full almost_empty obj_allocated obj_used pages_used pages_per_zspage freeable ... 151 2448 0 0 1240 1240 744 3 0 168 2720 0 0 4200 4200 2800 2 0 190 3072 0 0 10100 10100 7575 3 0 202 3264 0 0 380 380 304 4 0 254 4096 0 0 10620 10620 10620 1 0 Total 7 46 106982 106187 48787 0 PATCHED ZRAM/ZSMALLOC ===================== zram mm_stat 498978816 182579184 194248704 0 194248704 15628 0 zsmalloc classes class size almost_full almost_empty obj_allocated obj_used pages_used pages_per_zspage freeable ... 151 2448 0 0 1240 1240 744 3 0 168 2720 0 0 4200 4200 2800 2 0 190 3072 0 0 10100 10100 7575 3 0 202 3264 0 0 7180 7180 5744 4 0 254 4096 0 0 3820 3820 3820 1 0 Total 8 45 106959 106193 47424 0 As we can see, we reduced the number of objects stored in class-4096, because a huge number of objects which we previously forcibly stored in class-4096 now stored in non-huge class-3264. This results in lower memory consumption: - zsmalloc now uses 47424 physical pages, which is less than 48787 pages zsmalloc used before. - objects that we store in class-3264 share zspages. That's why overall the number of pages that both class-4096 and class-3264 consumed went down from 10924 to 9564. [sergey.senozhatsky.work@gmail.com: add pool param to zs_huge_class_size()] Link: http://lkml.kernel.org/r/20180314081833.1096-3-sergey.senozhatsky@gmail.com Link: http://lkml.kernel.org/r/20180306070639.7389-3-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: NMinchan Kim <minchan@kernel.org> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sergey Senozhatsky 提交于
Patch series "zsmalloc/zram: drop zram's max_zpage_size", v3. ZRAM's max_zpage_size is a bad thing. It forces zsmalloc to store normal objects as huge ones, which results in bigger zsmalloc memory usage. Drop it and use actual zsmalloc huge-class value when decide if the object is huge or not. This patch (of 2): Not every object can be share its zspage with other objects, e.g. when the object is as big as zspage or nearly as big a zspage. For such objects zsmalloc has a so called huge class - every object which belongs to huge class consumes the entire zspage (which consists of a physical page). On x86_64, PAGE_SHIFT 12 box, the first non-huge class size is 3264, so starting down from size 3264, objects can share page(-s) and thus minimize memory wastage. ZRAM, however, has its own statically defined watermark for huge objects, namely "3 * PAGE_SIZE / 4 = 3072", and forcibly stores every object larger than this watermark (3072) as a PAGE_SIZE object, in other words, to a huge class, while zsmalloc can keep some of those objects in non-huge classes. This results in increased memory consumption. zsmalloc knows better if the object is huge or not. Introduce zs_huge_class_size() function which tells if the given object can be stored in one of non-huge classes or not. This will let us to drop ZRAM's huge object watermark and fully rely on zsmalloc when we decide if the object is huge. [sergey.senozhatsky.work@gmail.com: add pool param to zs_huge_class_size()] Link: http://lkml.kernel.org/r/20180314081833.1096-2-sergey.senozhatsky@gmail.com Link: http://lkml.kernel.org/r/20180306070639.7389-2-sergey.senozhatsky@gmail.comSigned-off-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com> Acked-by: NMinchan Kim <minchan@kernel.org> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Huang Ying 提交于
Thanks to commit 4b3ef9da ("mm/swap: split swap cache into 64MB trunks"), after swapoff the address_space associated with the swap device will be freed. So page_mapping() users which may touch the address_space need some kind of mechanism to prevent the address_space from being freed during accessing. The dcache flushing functions (flush_dcache_page(), etc) in architecture specific code may access the address_space of swap device for anonymous pages in swap cache via page_mapping() function. But in some cases there are no mechanisms to prevent the swap device from being swapoff, for example, CPU1 CPU2 __get_user_pages() swapoff() flush_dcache_page() mapping = page_mapping() ... exit_swap_address_space() ... kvfree(spaces) mapping_mapped(mapping) The address space may be accessed after being freed. But from cachetlb.txt and Russell King, flush_dcache_page() only care about file cache pages, for anonymous pages, flush_anon_page() should be used. The implementation of flush_dcache_page() in all architectures follows this too. They will check whether page_mapping() is NULL and whether mapping_mapped() is true to determine whether to flush the dcache immediately. And they will use interval tree (mapping->i_mmap) to find all user space mappings. While mapping_mapped() and mapping->i_mmap isn't used by anonymous pages in swap cache at all. So, to fix the race between swapoff and flush dcache, __page_mapping() is add to return the address_space for file cache pages and NULL otherwise. All page_mapping() invoking in flush dcache functions are replaced with page_mapping_file(). [akpm@linux-foundation.org: simplify page_mapping_file(), per Mike] Link: http://lkml.kernel.org/r/20180305083634.15174-1-ying.huang@intel.comSigned-off-by: N"Huang, Ying" <ying.huang@intel.com> Reviewed-by: NAndrew Morton <akpm@linux-foundation.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Chen Liqin <liqin.linux@gmail.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Zankel <chris@zankel.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Ley Foon Tan <lftan@altera.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andi Kleen <ak@linux.intel.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-