Signed-off-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is to be used together with switch technologies, like RFC3069,
that where the individual ports are not allowed to communicate with
each other, but they are allowed to talk to the upstream router.  As
described in RFC 3069, it is possible to allow these hosts to
communicate through the upstream router by proxy_arp'ing.

This patch basically allow proxy arp replies back to the same
interface (from which the ARP request/solicitation was received).

Tunable per device via proc "proxy_arp_pvlan":
  /proc/sys/net/ipv4/conf/*/proxy_arp_pvlan

This switch technology is known by different vendor names:
 - In RFC 3069 it is called VLAN Aggregation.
 - Cisco and Allied Telesyn call it Private VLAN.
 - Hewlett-Packard call it Source-Port filtering or port-isolation.
 - Ericsson call it MAC-Forced Forwarding (RFC Draft).
Signed-off-by: NJesper Dangaard Brouer <hawk@comx.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Send aligned pipe payload if requested to do so. Then, the socket buffer
needs not be fragmented anymore.
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Newer Nokia cellular modems can use aligned payload for their GPRS pipe.
Signed-off-by: NRémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds the flag CAN_CTRLMODE_ONE_SHOT. It is used as mask
or flag in the "struct can_ctrlmode".

It allows userspace via netlink to set a CAN controller into the special
"one-shot" mode. In this mode, if supported by the CAN controller, it
tries only once to deliver a CAN frame and aborts it if an error
(e.g.: arbitration lost) happens.
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Acked-by: NWolfgang Grandegger <wg@grandegger.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To make it easier to notice cases of calling sleeping ops in atomic context,
annotate driver-ops.h with appropiate might_sleep() calls. At the same time,
also document in mac80211.h the op functions with missing contexts.

mac80211 doesn't seem to use get_tx_stats anywhere currently. Just to be on
the safe side, I documented it to be atomic, but hopefully the op can be
removed in the future.

Compile-tested only.
Signed-off-by: NKalle Valo <kalle.valo@iki.fi>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

All its members (vif, mac_addr, type) are now available
in the vif struct directly, so we can pass that instead
of the conf struct. I generated this patch (except the
mac80211 and header file changes) with this semantic
patch:

@@
identifier conf, fn, hw;
type tp;
@@
tp fn(struct ieee80211_hw *hw,
-struct ieee80211_if_init_conf *conf)
+struct ieee80211_vif *vif)
{
<...
(
-conf->type
+vif->type
|
-conf->mac_addr
+vif->addr
|
-conf->vif
+vif
)
...>
}
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

When, for instance, a new IBSS peer is found, userspace
wants to be notified. Add events for all new stations
that mac80211 learns about.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Add new commands for requesting the driver to remain awake
on a specified channel for the specified amount of time
(and another command to cancel such an operation). This
can be used to implement userspace-controlled off-channel
operations, like Public Action frame exchange on another
channel than the operation channel.

The off-channel operation should behave similarly to scan,
i.e. the local station (if associated) moves into power
save mode to request the AP to buffer frames for it and
then moves to the other channel to allow the off-channel
operation to be completed. The duration parameter can be
used to request enough time to receive a response from
the target station.
Signed-off-by: NJouni Malinen <jouni.malinen@atheros.com>
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Currently, we insert all user-specified IEs before the HT
IE for association, and after the HT IE for probe requests.
For association, that's correct only if the user-specified
IEs are RSN only, incorrect in all other cases including
WPA. Change this to split apart the user-specified IEs in
two places for association: before the HT IE (e.g. RSN),
after the HT IE (generally empty right now I think?) and
after WMM (all other vendor-specific IEs). For probes,
split the IEs in different places to be correct according
to the spec.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

We've long lacked a good confirmation that frames
have really gone out, e.g. before going off-channel
for a scan. Add a flush() operation that drivers
can implement to provide that confirmation, and use
it in a few places:
 * before scanning sends the nullfunc frames
 * after scanning sends the nullfunc frames, if any
 * when going idle, to send any pending frames
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This removes the remaining users of the rx status
'qual' field and the field itself.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Signed-off-by: NOctavian Purdila <opurdila@ixiacom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For the cases where a lot of interfaces are used in conjunction with a
lot of LLC sockets bound to the same SAP, the iteration of the socket
list becomes prohibitively expensive.

Replacing the list with a a local address based hash significantly
improves the bind and listener lookup operations as well as the
datagram delivery.

Connected sockets delivery is also improved, but this patch does not
address the case where we have lots of sockets with the same local
address connected to different remote addresses.

In order to keep the socket sanity checks alive and fast a socket
counter was added to the SAP structure.
Signed-off-by: NOctavian Purdila <opurdila@ixiacom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a per SAP device based hash table to solve the
multicast delivery scalability issue when we have large number of
interfaces and a large number of sockets bound to the same SAP.
Signed-off-by: NOctavian Purdila <opurdila@ixiacom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For the reclamation phase we use the SLAB_DESTROY_BY_RCU mechanism,
which require some extra checks in the lookup code:

a) If the current socket was released, reallocated & inserted in
another list it will short circuit the iteration for the current list,
thus we need to restart the lookup.

b) If the current socket was released, reallocated & inserted in the
same list we just need to recheck it matches the look-up criteria and
if not we can skip to the next element.

In this case there is no need to restart the lookup, since sockets are
inserted at the start of the list and the worst that will happen is
that we will iterate throught some of the list elements more then
once.

Note that the /proc and multicast delivery was not yet converted to
RCU, it still uses spinlocks for protection.
Signed-off-by: NOctavian Purdila <opurdila@ixiacom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NOctavian Purdila <opurdila@ixiacom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add rtnetlink init_rcvwnd to set the TCP initial receive window size
advertised by passive and active TCP connections.
The current Linux TCP implementation limits the advertised TCP initial
receive window to the one prescribed by slow start. For short lived
TCP connections used for transaction type of traffic (i.e. http
requests), bounding the advertised TCP initial receive window results
in increased latency to complete the transaction.
Support for setting initial congestion window is already supported
using rtnetlink init_cwnd, but the feature is useless without the
ability to set a larger TCP initial receive window.
The rtnetlink init_rcvwnd allows increasing the TCP initial receive
window, allowing TCP connection to advertise larger TCP receive window
than the ones bounded by slow start.
Signed-off-by: NLaurent Chavey <chavey@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_push checks tcp_send_head and calls __tcp_push_pending_frames,
which again checks tcp_send_head, and this unnecessary check is
done for every other caller of __tcp_push_pending_frames.

Remove tcp_send_head check in __tcp_push_pending_frames and add
the check to tcp_push_pending_frames. Other functions call
__tcp_push_pending_frames only when tcp_send_head would evaluate
to true.
Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com>
Acked-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

DST is dead, no one is using it and upstream
has abandoned it, so remove it from the tree because
it is not going anywhere.
Acked-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Many struct driver_attribute descriptors are purely read-only
structures, and there's no need to change them. Therefore make
the promise not to, which will let those descriptors be put in
a ro section.
Signed-off-by: NPhil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Many struct bin_attribute descriptors are purely read-only
structures, and there's no need to change them. Therefore
make the promise not to, which will let those descriptors
be put in a ro section.
Signed-off-by: NPhil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Most device_attributes are const, and are begging to be
put in a ro section. However, the create and remove
file interfaces were failing to propagate the const promise
which the only functions they call offer.
Signed-off-by: NPhil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix kernel-doc errors and warnings in new header file kfifo.h.
Don't use kernel-doc "/**" for internal functions whose comments
are not in kernel-doc format.

kernel-doc section header names (like "Note:") must be unique
per function.  Looks like I need to document that.

  Error(include/linux/kfifo.h:76): duplicate section name 'Note'
  Warning(include/linux/kfifo.h:88): Excess function parameter 'size' description in 'INIT_KFIFO'
  Error(include/linux/kfifo.h:101): duplicate section name 'Note'
  Warning(include/linux/kfifo.h:257): No description found for parameter 'fifo'
    (many of this last type, from internal functions)
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Stefani Seibold <stefani@seibold.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The USB serial code was a new user of the kfifo API, and it was missed
when porting things to the new kfifo API.

Please make the write_fifo in place.  Here is my patch to fix the
regression and full ported version.
Signed-off-by: NStefani Seibold <stefani@seibold.net>
Reported-and-tested-by: NRafael J. Wysocki <rjw@sisk.pl>
Cc: Greg KH <greg@kroah.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use a separate lock to protect s_groups_count and the other block
group descriptors which get changed via an on-line resize operation,
so we can stop overloading the use of lock_super().

Port of ext4 commit 32ed5058 by
Theodore Ts'o <tytso@mit.edu>.

CC: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJan Kara <jack@suse.cz>

Use a separate lock to protect the orphan list, so we can stop
overloading the use of lock_super().

Port of ext4 commit 3b9d4ed2
by Theodore Ts'o <tytso@mit.edu>.

CC: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJan Kara <jack@suse.cz>

Currently inode_reservation is managed by fs itself and this
reservation is transfered on dquot_transfer(). This means what
inode_reservation must always be in sync with
dquot->dq_dqb.dqb_rsvspace. Otherwise dquot_transfer() will result
in incorrect quota(WARN_ON in dquot_claim_reserved_space() will be
triggered)
This is not easy because of complex locking order issues
for example http://bugzilla.kernel.org/show_bug.cgi?id=14739

The patch introduce quota reservation field for each fs-inode
(fs specific inode is used in order to prevent bloating generic
vfs inode). This reservation is managed by quota code internally
similar to i_blocks/i_bytes and may not be always in sync with
internal fs reservation.

Also perform some code rearrangement:
- Unify dquot_reserve_space() and dquot_reserve_space()
- Unify dquot_release_reserved_space() and dquot_free_space()
- Also this patch add missing warning update to release_rsv()
  dquot_release_reserved_space() must call flush_warnings() as
  dquot_free_space() does.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NJan Kara <jack@suse.cz>

Quota code requires unlocked version of this function. Off course
we can just copy-paste the code, but copy-pasting is always an evil.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NJan Kara <jack@suse.cz>

Currently all quota block reservation macros contains hardcoded "2"
aka MAXQUOTAS value. This is no good because in some places it is not
obvious to understand what does this digit represent. Let's introduce
new macro with self descriptive name.
Signed-off-by: NDmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: NJan Kara <jack@suse.cz>

Add kfifo_in_rec() - puts some record data into the FIFO
 Add kfifo_out_rec() - gets some record data from the FIFO
 Add kfifo_from_user_rec() - puts some data from user space into the FIFO
 Add kfifo_to_user_rec() - gets data from the FIFO and write it to user space
 Add kfifo_peek_rec() - gets the size of the next FIFO record field
 Add kfifo_skip_rec() - skip the next fifo out record
 Add kfifo_avail_rec() - determinate the number of bytes available in a record FIFO
Signed-off-by: NStefani Seibold <stefani@seibold.net>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add kfifo_reset_out() for save lockless discard the fifo output
 Add kfifo_skip() to skip a number of output bytes
 Add kfifo_from_user() to copy user space data into the fifo
 Add kfifo_to_user() to copy fifo data to user space
Signed-off-by: NStefani Seibold <stefani@seibold.net>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add DECLARE_KFIFO - macro to declare a kfifo and the associated buffer inside a struct
 Add INIT_KFIFO - Initialize a kfifo declared by DECLARED_KFIFO
 Add DEFINE_KFIFO - macro to define and initialize a kfifo as a global or local object
 Add kfifo_size() - returns the size of the fifo in bytes
 Add kfifo_is_empty() - returns true if the fifo is empty
 Add kfifo_is_full() - returns true if the fifo is full
 Add kfifo_avail() - returns the number of bytes available in the FIFO
 Do some code cleanup
Signed-off-by: NStefani Seibold <stefani@seibold.net>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fix the "ignoring return value of '...', declared with attribute
warn_unused_result" compiler warning in several users of the new kfifo
API.

It removes the __must_check attribute from kfifo_in() and
kfifo_in_locked() which must not necessary performed.

Fix the allocation bug in the nozomi driver file, by moving out the
kfifo_alloc from the interrupt handler into the probe function.

Fix the kfifo_out() and kfifo_out_locked() users to handle a unexpected
end of fifo.
Signed-off-by: NStefani Seibold <stefani@seibold.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

rename kfifo_put...  into kfifo_in...  to prevent miss use of old non in
kernel-tree drivers

ditto for kfifo_get...  -> kfifo_out...

Improve the prototypes of kfifo_in and kfifo_out to make the kerneldoc
annotations more readable.

Add mini "howto porting to the new API" in kfifo.h
Signed-off-by: NStefani Seibold <stefani@seibold.net>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

change name of __kfifo_* functions to kfifo_*, because the prefix __kfifo
should be reserved for internal functions only.
Signed-off-by: NStefani Seibold <stefani@seibold.net>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move the pointer to the spinlock out of struct kfifo.  Most users in
tree do not actually use a spinlock, so the few exceptions now have to
call kfifo_{get,put}_locked, which takes an extra argument to a
spinlock.
Signed-off-by: NStefani Seibold <stefani@seibold.net>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a new generic kernel FIFO implementation.

The current kernel fifo API is not very widely used, because it has to
many constrains.  Only 17 files in the current 2.6.31-rc5 used it.
FIFO's are like list's a very basic thing and a kfifo API which handles
the most use case would save a lot of development time and memory
resources.

I think this are the reasons why kfifo is not in use:

 - The API is to simple, important functions are missing
 - A fifo can be only allocated dynamically
 - There is a requirement of a spinlock whether you need it or not
 - There is no support for data records inside a fifo

So I decided to extend the kfifo in a more generic way without blowing up
the API to much.  The new API has the following benefits:

 - Generic usage: For kernel internal use and/or device driver.
 - Provide an API for the most use case.
 - Slim API: The whole API provides 25 functions.
 - Linux style habit.
 - DECLARE_KFIFO, DEFINE_KFIFO and INIT_KFIFO Macros
 - Direct copy_to_user from the fifo and copy_from_user into the fifo.
 - The kfifo itself is an in place member of the using data structure, this save an
   indirection access and does not waste the kernel allocator.
 - Lockless access: if only one reader and one writer is active on the fifo,
   which is the common use case, no additional locking is necessary.
 - Remove spinlock - give the user the freedom of choice what kind of locking to use if
   one is required.
 - Ability to handle records. Three type of records are supported:
   - Variable length records between 0-255 bytes, with a record size
     field of 1 bytes.
   - Variable length records between 0-65535 bytes, with a record size
     field of 2 bytes.
   - Fixed size records, which no record size field.
 - Preserve memory resource.
 - Performance!
 - Easy to use!

This patch:

Since most users want to have the kfifo as part of another object,
reorganize the code to allow including struct kfifo in another data
structure.  This requires changing the kfifo_alloc and kfifo_init
prototypes so that we pass an existing kfifo pointer into them.  This
patch changes the implementation and all existing users.

[akpm@linux-foundation.org: fix warning]
Signed-off-by: NStefani Seibold <stefani@seibold.net>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

IEEE-802.11n spec says the RX highest data rate field does
not specify the highest supported RX data rate if its not set.
Ignore it if not set then. Refer to section 7.3.56.4

Cc: johannes@sipsolutions.net
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Enable spatial multiplexing in mac80211 by telling the
driver what to do and, where necessary, sending action
frames to the AP to update the requested SMPS mode.

Also includes a trivial implementation for hwsim that
just logs the requested mode.

For now, the userspace interface is in debugfs only,
and let you toggle the requested mode at any time.
Signed-off-by: NJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>