If we remove a missing device, bdev is null, and if we
send that off to btrfs_kobject_uevent we'll panic.
Signed-off-by: NEric Sandeen <sandeen@redhat.com>
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This reverts commit 6a7a665d.

This was bug was fixed differently in 3.6, so this commit
isn't needed.

Conflicts:
	fs/btrfs/ctree.c
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This reverts commit 95c80bb1.

The bug addressed by this commit was fixed differently back in 3.6
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Users report a bug, the reproducer is:
$ mkfs.btrfs /dev/loop0
$ mount /dev/loop0 /mnt/btrfs/
$ mkdir /mnt/btrfs/dir
$ chattr +C /mnt/btrfs/dir/
$ dd if=/dev/zero of=/mnt/btrfs/dir/foo bs=4K count=10;
$ lsattr /mnt/btrfs/dir/foo
---------------C- /mnt/btrfs/dir/foo
$ filefrag /mnt/btrfs/dir/foo
/mnt/btrfs/dir/foo: 1 extent found    ---> an extent
$ dd if=/dev/zero of=/mnt/btrfs/dir/foo bs=4K count=1 seek=5 conv=notrunc,nocreat; sync
$ filefrag /mnt/btrfs/dir/foo
/mnt/btrfs/dir/foo: 3 extents found   ---> with nocow, btrfs breaks the extent into three parts

The new created file should not only inherit the NODATACOW flag, but also
honor NODATASUM flag, because we must do COW on a file extent with checksum.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

The handling for directory crc hash overflows was fairly obscure,
split_leaf returns EOVERFLOW when we try to extend the item and that is
supposed to bubble up to userland.  For a while it did so, but along the
way we added better handling of errors and forced the FS readonly if we
hit IO errors during the directory insertion.

Along the way, we started testing only for EEXIST and the EOVERFLOW case
was dropped.  The end result is that we may force the FS readonly if we
catch a directory hash bucket overflow.

This fixes a few problem spots.  First I add tests for EOVERFLOW in the
places where we can safely just return the error up the chain.

btrfs_rename is harder though, because it tries to insert the new
directory item only after it has already unlinked anything the rename
was going to overwrite.  Rather than adding very complex logic, I added
a helper to test for the hash overflow case early while it is still safe
to bail out.

Snapshot and subvolume creation had a similar problem, so they are using
the new helper now too.
Signed-off-by: NChris Mason <chris.mason@fusionio.com>
Reported-by: NPascal Junod <pascal@junod.info>

This confuses and angers lockdep even though it's ok.  We don't really need
the lock for free space inodes since only the transaction committer will be
reserving space.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This happens because writeback_inodes_sb_nr_if_idle does down_read.  This
doesn't work for us and it has not been fixed upstream yet, so do it
ourselves and use that instead so we can stop having this stupid long
standing lockup.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

When a new file is created with btrfs_create(), the inode will initially be
created with permissions 0666 and later on in btrfs_init_acl() it will be
adapted to mask out the umask bits. The problem is that this change won't make
it into the btrfs_inode unless there's another change to the inode (e.g. writing
content changing the size or touching the file changing the mtime.)

This fix adds a call to btrfs_update_inode() to btrfs_create() to make sure that
the change will not get lost if the in-memory inode is flushed before other
changes are made to the file.
Signed-off-by: NFilipe Brandenburger <filbranden@google.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Raid properties can be shared among raid calculation code, we can put
them into a global table to keep it simple.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This fixes a very special case that can be reproduced by just
disconnecting a disk at runtime, and without unmounting the
filesystem first, start scrub on the filesystem with the
disconnected disk. All read and write EIOs are handled
correctly, only the first superblock is an exception and gives
a BUG() in a subfunction. The BUG() is correct, it would crash
later otherwise. The subfunction must not be called for
superblocks and this is what the fix changes.
Reported-by: NJoeri Vanthienen <mail@joerivanthienen.be>
Signed-off-by: NStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This starts a transaction and dirties the inode everytime we call it, which
is super expensive if you have a write heavy workload.  We will be updating
the inode when the IO completes and we reserve the space for the inode
update when we reserve space for the write, so there is no chance of loss of
information or enospc issues.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

I noticed while doing fsync tests that we were always dropping the path and
re-searching when we first cow the log root even though we've already gotten
the write lock on the root.  That's because we don't take into account that
there might not be a parent node, so fix the check to make sure there is
actually a parent node before we undo all of this work for nothing.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

If we are syncing over and over the overhead of doing all those maps in
fill_inode_item and log_changed_extents really starts to hurt, so use map
tokens so we can avoid all the extra mapping.  Since the token maps from our
offset to the end of the page make sure to set the first thing in the item
first so we really only do one map.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This gets called at least 4 times for every level while adding an object,
and it involves 3 kmapping calls, which on my box take about 5us a piece.
So instead use a token, which brings us down to 1 kmap call and makes this
function take 1/3 of the time per call.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Our token logic depends on token->kaddr being set, and if it is not it sets
everything properly as needed.  So instead of memsetting just set
token->kaddr to NULL.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

No reason to set the path blocking or loop through all of the pages if the
extent buffer isn't actually marked dirty.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

This is a high traffic function, let's try and do as little as possible
during normal operations shall we?
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We don't really need to copy extents from the source tree since we have all
of the information already available to us in the extent_map tree.  So
instead just write the extents straight to the log tree and don't bother to
copy the extent items from the source tree.
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

You'd think path->keep_locks would keep all the locks wouldn't you?  You'd
be wrong.  It only keeps them if the slot is pointing to the last item in
the node.  This is for use with btrfs_next_leaf, which needs this sort of
thing.  But the horrible horrible things I'm going to do to the tree log
means I really need everything held from root to leaf so I can add and
delete items in the same search.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We are going to use EM's to log extents in the future, so we need to not
mark them as prealloc if they aren't actually prealloc extents.  Instead
mark them with FILLING so we know to ammend mod_start/mod_len and that way
we don't confuse the extent logging code.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

If we've written to a prealloc extent we need to know the original block len
for the extent.  We can't figure this out currently since ->block_len is
just set to the extent length.  So introduce ->orig_block_len so that we
know how many bytes were in the original extent for proper extent logging
that future patches will need.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

The tree logging stuff needs the csums to be on the ordered extents in order
to log them properly, so mark that we're sync and inline the csum creation
so we don't have to wait on the csumming to be done when logging extents
that are still in flight.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We don't copy inode items anwyay, we just copy them straight into the log
from the in memory inode.  So if we know we're only logging the inode, don't
bother dropping anything, just try to insert it and either if it succeeds or
we get EEXIST we can update the inode item in the log and carry on.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Currently we copy all the file information into the log, inode item, the
refs, xattrs etc.  Except most of this doesn't change from fsync to fsync,
just the inode item changes.  So set a flag if an xattr changes or a link is
added, and otherwise only log the inode item.  Thanks,
Signed-off-by: NJosef Bacik <jbacik@fusionio.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Originally root_times_lock was introduced as part of send/receive
code however newly developed patch to label the subvol reused
the same lock, so renaming it for a meaningful name.
Signed-off-by: NAnand Jain <anand.jain@oracle.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Currently udev does not know about the device being removed from the
file system. This may result in the situation where we're unable to
mount the file system by UUID or by LABEL because the by-uuid and
by-label links may still point to the device which is no longer part of
the btrfs file system and hence does not have any btrfs super block.

It can be easily reproduced by the following:

mkfs.btrfs -L bugfs /dev/loop[0-6]
mount /dev/loop0 /mnt/test
btrfs device delete /dev/loop0 /mnt/test
umount /mnt/test

mount LABEL=bugfs /mnt/test <---- this fails

then see:

ls -l /dev/disk/by-label/bugfs

which will still point to the /dev/loop0

We did not noticed this before because libblkid would send the udev
event for us when it notice that the link does not fit the reality,
however it does not do that anymore and completely relies on udev
information.

Fix this by sending the KOBJ_CHANGE event to the bdev kobject after
successful device removal.

Note that this does not affect device addition, because we will open the
device prior the addition from userspace and udev will notice that and
reread the device afterwards.
Signed-off-by: NLukas Czerner <lczerner@redhat.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

ret variant may be set to 0 if we read page successfully, but it might be
released before we lock it again. On this case, if we fail to allocate a
new page, we will return 0, it is wrong, fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Since we can pre-allocate the space past EOF, we should be able to reclaim
that space if we need. This patch implements it by removing the EOF check.

Though the manual of fallocate command says we can use truncate command to
reclaim the pre-allocated space which past EOF, but because truncate command
changes the file size, we must run several commands to reclaim the space if we
don't want to change the file size, so it is not a good choice.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Steps to reproduce:
 # mkfs.btrfs <disk>
 # mount <disk> <mnt>
 # dd if=/dev/zero of=<mnt>/<file> bs=512 seek=5 count=8
 # fallocate -p -o 2048 -l 16384 <mnt>/<file>
 # dd if=/dev/zero of=<mnt>/<file> bs=4096 seek=3 count=8 conv=notrunc,nocreat
 # umount <mnt>
 # dmesg
 WARNING: at fs/btrfs/inode.c:7140 btrfs_destroy_inode+0x2eb/0x330

The reason is that we inputed a range which is beyond the end of the file. And
because the end of this range was not page-aligned, we had to truncate the last
page in this range, this operation is similar to a buffered file write. In other
words, we reserved enough space and clear the data which was in the hole range
on that page. But when we expanded that test file, write the data into the same
page, we forgot that we have reserved enough space for the buffered write of
that page because in most cases there is no page that is beyond the end of
the file. As a result, we reserved the space twice.

In fact, we needn't truncate the page if it is beyond the end of the file, just
release the allocated space in that range. Fix the above problem by this way.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

(start + len) is the start of the adjacent extent, not the end of the current
extent, so we should not use it to check the hole is on the same page or not.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We forget to release the reserved space in the error path of delalloc
reservatiom, fix it.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

If we runt the direct IO, we should not run auto defrag, because it may
introduce buffered IO vs direcIO problem, and make direct IO slow down.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Value 0 is not a tree id, so besides an upper limit, a lower limit is
necessary as well while parsing root types of tracepoint.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

We should use ctl->unit for free space calculation instead of block_group->sectorsize
even though for free space use_bitmap or free space cluster we only have sectorsize assigned to ctl->unit currently. Also, we can keep it consisten in code style.
Signed-off-by: NWang Sheng-Hui <shhuiw@gmail.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Refactor it by checking whether the inode has been created and needs to be
dropped (drop_inode_on_err) and also if the err variable is set. That way the
variable doesn't need to be set on each and every error handling block.
Signed-off-by: NFilipe Brandenburger <filbranden@google.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

When a new file is created with btrfs_create(), the inode will initially be
created with permissions 0666 and later on in btrfs_init_acl() it will be
adapted to mask out the umask bits. The problem is that this change won't make
it into the btrfs_inode unless there's another change to the inode (e.g. writing
content changing the size or touching the file changing the mtime.)

This fix adds a call to btrfs_update_inode() to btrfs_create() to make sure that
the change will not get lost if the in-memory inode is flushed before other
changes are made to the file.
Signed-off-by: NFilipe Brandenburger <filbranden@google.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

When the flag not supported is specified, it is necessary to return the error
to the caller.
So, we add the validity check of the fiemap's flag.
Signed-off-by: NTsutomu Itoh <t-itoh@jp.fujitsu.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

Passing a null extended attribute value means to remove the attribute,
but we don't have to add a new NULL extended attribute.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

If the acl can be exactly represented in the traditional file
mode permission bits, we don't set another acl attribute.
Signed-off-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>

alloc_end is not the real end of the current extent, it is the start of the
next adjoining extent. So we needn't +1 when calculating the size the space
that is about to be reserved.
Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com>
Reviewed-by: NLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: NChris Mason <chris.mason@fusionio.com>