- 30 11月, 2006 1 次提交
-
-
由 Eric Sesterhenn 提交于
Replace open coded kmemdup() to save some screen space, and allow inlining/not inlining to be triggered by gcc. Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 21 11月, 2006 1 次提交
-
-
由 Bryan O'Sullivan 提交于
ipath uses skb functions and won't build without CONFIG_NET. Spotted by Randy Dunlap. Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 17 11月, 2006 1 次提交
-
-
由 Bryan O'Sullivan 提交于
The PCI Express and Hypertransport chip-specific source files should only be built when the kernel has the capability of actually compiling them. This fixes the driver build on, for example, ia64. Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 14 11月, 2006 4 次提交
-
-
由 Jean Delvare 提交于
Fix the AMSO1100 firmware version computation, which was broken due to "&&" being used where "&" should have. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Tom Tucker 提交于
Rework some load-time error handling: c2_register_device() leaked when it failed, and the function that called it didn't check the return code. Signed-off-by: NTom Tucker <tom@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Hoang-Nam Nguyen 提交于
Change ehca's Kconfig to activates scaling code as default. After several measurements we saw that this feature prevents dropped packets (UD) in stress situation. Thus, enabling it helps to improve ehca's bandwidth through IPoIB. Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Hoang-Nam Nguyen 提交于
Define and use a constant EHCA_MAX_MTU instead hardcoded value. Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 10 11月, 2006 1 次提交
-
-
由 Hoang-Nam Nguyen 提交于
Assure 4K alignment for firmware control blocks in 64K page mode, because kzalloc()'s result address might not be 4K aligned if 64K pages are enabled. Thus, we introduce wrappers called ehca_{alloc,free}_fw_ctrlblock(), which use a slab cache for objects with 4K length and 4K alignment in order to alloc/free firmware control blocks in 64K page mode. In 4K page mode those wrappers just are defines of get_zeroed_page() and free_page(). Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 09 11月, 2006 1 次提交
-
-
由 Bryan O'Sullivan 提交于
Eric's changes to the htirq infrastructure require corresponding modifications to the ipath HT driver code so that interrupts are still delivered properly. Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 11月, 2006 1 次提交
-
-
由 Michael S. Tsirkin 提交于
Several fields in an incoming MAD extended info header were passed into the MAD_IFC firmware command at incorrect offsets (mostly off by 4 bytes). As the result, the HCA will fail to generate traps in which this info is needed (e.g. traps which include the GRH of the incoming packet), in violation of the IB spec. Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 31 10月, 2006 3 次提交
-
-
由 Steve Wise 提交于
pr_debug() was printing the wrong stuff. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Steve Wise 提交于
The Ammasso driver needs to use dma_alloc_coherent() for allocating memory that will be used by the HW for dma. Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Paul Mackerras 提交于
The eHCA driver does not compile for a uniprocessor configuration (CONFIG_SMP=n), due to H_SUCCESS and other symbols being undefined. This fixes it. Signed-off-by: NPaul Mackerras <paulus@samba.org> Acked-by: NHoang-Nam Nguyen <HNGUYEN@de.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 17 10月, 2006 4 次提交
-
-
由 Arthur Kepner 提交于
We discovered a problem when running IPoIB applications on multiple CPUs on an Altix system. Many messages such as: ib_mthca 0002:01:00.0: SQ 000014 full (19941644 head, 19941707 tail, 64 max, 0 nreq) appear in syslog, and the driver wedges up. Apparently this is because writes to the doorbells from different CPUs reach the device out of order. The following patch adds mmiowb() calls after doorbell rings to ensure the doorbell writes are ordered. Signed-off-by: NArthur Kepner <akepner@sgi.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Robert Walsh 提交于
Don't attempt to set up the diagpkt device in the module init code. Instead, wait until a piece of hardware is initialized. Fixes a problem when loading the ib_ipath module when no InfiniPath hardware is present: modprobe would go into the D state and stay there. Signed-off-by: NRobert Walsh <robert.walsh@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Adrian Bunk 提交于
This patch fixes a NULL dereference spotted by the Coverity checker. Signed-off-by: NAdrian Bunk <bunk@stusta.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Acked-by: NSteve Wise <swise@opengridcomputing.com> Acked-by: NTom Tucker <tom@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Henrik Kretzschmar 提交于
pci_module_init() convertion in amso1100 driver. Signed-off-by: NHenrik Kretzschmar <henne@nachtwindheim.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 11 10月, 2006 4 次提交
-
-
由 Michael S. Tsirkin 提交于
All HCAs (not just mem-free) need a spare SRQ entry, so bump srq->max by 1 in all cases. Noted by Jack Morgenstein <jackm@mellanox.co.il> Signed-off-by: NMichael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Roland Dreier 提交于
Since pr_debug() has changed from a macro to an inline function when DEBUG is not defined, its arguments now need to be defined even when debugging is off. Therefore to_event_str() and to_qp_state_str() need to be moved out of #ifdef DEBUG. The compiler will throw the definitions away if DEBUG is not defined, but it needs to be able to see that the functions exist. Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Jack Morgenstein 提交于
Fill in "max_vl_num" (encoded according to VLCap field in the PortInfo MAD) and "init_type_reply" values in the ib_query_port() verb. Signed-off-by: NJack Morgenstein <jackm@mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Tom Tucker 提交于
The AMSO driver was not thread-safe in the post WR code and had code that would sleep if the WR post FIFO was full. Since these functions can be called on interrupt level I changed the sleep to a udelay. Signed-off-by: NTom Tucker <tom@opengridcomputing.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
- 05 10月, 2006 1 次提交
-
-
由 David Howells 提交于
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: NDavid Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
-
- 04 10月, 2006 1 次提交
-
-
由 Dave Jones 提交于
kbuild explicitly includes this at build time. Signed-off-by: NDave Jones <davej@redhat.com>
-
- 03 10月, 2006 3 次提交
-
-
由 Hoang-Nam Nguyen 提交于
Add an extra space to make things more readable. Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Hoang-Nam Nguyen 提交于
Move the call to ib_register_device() later, since a device should not be registered until it is completely read to be used. This fixes crashes that occur if an upper-layer driver such as IPoIB is loaded before the ehca module. Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Ralph Campbell 提交于
The PSN used to generate the request following a RDMA read was incorrect and some state booking wasn't maintained correctly. This patch fixes that. Signed-off-by: NRalph Campbell <ralph.campbell@qlogic.com> Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com>
-
- 02 10月, 2006 1 次提交
-
-
由 Serge E. Hallyn 提交于
In some places, particularly drivers and __init code, the init utsns is the appropriate one to use. This patch replaces those with a the init_utsname helper. Changes: Removed several uses of init_utsname(). Hope I picked all the right ones in net/ipv4/ipconfig.c. These are now changed to utsname() (the per-process namespace utsname) in the previous patch (2/7) [akpm@osdl.org: CIFS fix] Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Andrey Savochkin <saw@sw.ru> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 10月, 2006 1 次提交
-
-
由 Dave Hansen 提交于
This is mostly included for parity with dec_nlink(), where we will have some more hooks. This one should stay pretty darn straightforward for now. Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Acked-by: NChristoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 9月, 2006 12 次提交
-
-
由 Bryan O'Sullivan 提交于
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Bryan O'Sullivan 提交于
The resize CQ function changes the memory used to store the queue. Other routines need to honor the lock before accessing the pointer to the queue and verify that the head and tail are in range. Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Bryan O'Sullivan 提交于
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Bryan O'Sullivan 提交于
This change moves around port assignment so that it happens before any memory is allocated. This allows memory to be allocated on an appropriate CPU, which improves performance for users of /dev/ipath. Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Bryan O'Sullivan 提交于
The EEPROM is read via programmable I/O pins. When the driver is compiled -Os, the CPU can speculatively read the I/O value before it is valid. This patch fixes the problem. Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Bryan O'Sullivan 提交于
We can sometimes trigger parity errors due to processor speculative reads to our write-combined memory (mostly seen on Woodcrest). Add a stats counter for these. Factored out the sendbuffererror buffer cancellation code so it can be used in the new handling; suppress likely subsequent error messages if within two jiffies of the cancellation. Also restore 2 dropped TXE lines on hwe_bitsextant noticed while debugging. Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Bryan O'Sullivan 提交于
The system must be powercycled to clear a HT CRC error; reloading the driver is not enough. Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Bryan O'Sullivan 提交于
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Bryan O'Sullivan 提交于
We were passing 0 for base and length, which worked on older kernels, but it doesn't seem to any longer. Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Bryan O'Sullivan 提交于
If the receiver goes into the error state, we need to flush the posted receive WQEs. Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Bryan O'Sullivan 提交于
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Bryan O'Sullivan 提交于
Signed-off-by: NBryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-