This patch adds trace points in the guest entry and exit code and also
for exceptions handled by the host in kernel mode - hypercalls and page
faults. The new events are added to /sys/kernel/debug/tracing/events
under a new subsystem called kvm_hv.
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NSuresh Warrier <warrier@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Currently the calculations of stolen time for PPC Book3S HV guests
uses fields in both the vcpu struct and the kvmppc_vcore struct.  The
fields in the kvmppc_vcore struct are protected by the
vcpu->arch.tbacct_lock of the vcpu that has taken responsibility for
running the virtual core.  This works correctly but confuses lockdep,
because it sees that the code takes the tbacct_lock for a vcpu in
kvmppc_remove_runnable() and then takes another vcpu's tbacct_lock in
vcore_stolen_time(), and it thinks there is a possibility of deadlock,
causing it to print reports like this:

=============================================
[ INFO: possible recursive locking detected ]
3.18.0-rc7-kvm-00016-g8db4bc6 #89 Not tainted
---------------------------------------------
qemu-system-ppc/6188 is trying to acquire lock:
 (&(&vcpu->arch.tbacct_lock)->rlock){......}, at: [<d00000000ecb1fe8>] .vcore_stolen_time+0x48/0xd0 [kvm_hv]

but task is already holding lock:
 (&(&vcpu->arch.tbacct_lock)->rlock){......}, at: [<d00000000ecb25a0>] .kvmppc_remove_runnable.part.3+0x30/0xd0 [kvm_hv]

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&vcpu->arch.tbacct_lock)->rlock);
  lock(&(&vcpu->arch.tbacct_lock)->rlock);

 *** DEADLOCK ***

 May be due to missing lock nesting notation

3 locks held by qemu-system-ppc/6188:
 #0:  (&vcpu->mutex){+.+.+.}, at: [<d00000000eb93f98>] .vcpu_load+0x28/0xe0 [kvm]
 #1:  (&(&vcore->lock)->rlock){+.+...}, at: [<d00000000ecb41b0>] .kvmppc_vcpu_run_hv+0x530/0x1530 [kvm_hv]
 #2:  (&(&vcpu->arch.tbacct_lock)->rlock){......}, at: [<d00000000ecb25a0>] .kvmppc_remove_runnable.part.3+0x30/0xd0 [kvm_hv]

stack backtrace:
CPU: 40 PID: 6188 Comm: qemu-system-ppc Not tainted 3.18.0-rc7-kvm-00016-g8db4bc6 #89
Call Trace:
[c000000b2754f3f0] [c000000000b31b6c] .dump_stack+0x88/0xb4 (unreliable)
[c000000b2754f470] [c0000000000faeb8] .__lock_acquire+0x1878/0x2190
[c000000b2754f600] [c0000000000fbf0c] .lock_acquire+0xcc/0x1a0
[c000000b2754f6d0] [c000000000b2954c] ._raw_spin_lock_irq+0x4c/0x70
[c000000b2754f760] [d00000000ecb1fe8] .vcore_stolen_time+0x48/0xd0 [kvm_hv]
[c000000b2754f7f0] [d00000000ecb25b4] .kvmppc_remove_runnable.part.3+0x44/0xd0 [kvm_hv]
[c000000b2754f880] [d00000000ecb43ec] .kvmppc_vcpu_run_hv+0x76c/0x1530 [kvm_hv]
[c000000b2754f9f0] [d00000000eb9f46c] .kvmppc_vcpu_run+0x2c/0x40 [kvm]
[c000000b2754fa60] [d00000000eb9c9a4] .kvm_arch_vcpu_ioctl_run+0x54/0x160 [kvm]
[c000000b2754faf0] [d00000000eb94538] .kvm_vcpu_ioctl+0x498/0x760 [kvm]
[c000000b2754fcb0] [c000000000267eb4] .do_vfs_ioctl+0x444/0x770
[c000000b2754fd90] [c0000000002682a4] .SyS_ioctl+0xc4/0xe0
[c000000b2754fe30] [c0000000000092e4] syscall_exit+0x0/0x98

In order to make the locking easier to analyse, we change the code to
use a spinlock in the kvmppc_vcore struct to protect the stolen_tb and
preempt_tb fields.  This lock needs to be an irq-safe lock since it is
used in the kvmppc_core_vcpu_load_hv() and kvmppc_core_vcpu_put_hv()
functions, which are called with the scheduler rq lock held, which is
an irq-safe lock.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Remove the function inst_set_field() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Remove the function get_fpr_index() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Removes some functions that are not used anywhere:
kvmppc_core_load_guest_debugstate() kvmppc_core_load_host_debugstate()

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Remove the function sr_nx() that is not used anywhere.

This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: NRickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The kvmppc_vcore_blocked() code does not check for the wait condition
after putting the process on the wait queue. This means that it is
possible for an external interrupt to become pending, but the vcpu to
remain asleep until the next decrementer interrupt.  The fix is to
make one last check for pending exceptions and ceded state before
calling schedule().
Signed-off-by: NSuresh Warrier <warrier@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When being restored from qemu, the kvm_get_htab_header are in native
endian, but the ptes are big endian.

This patch fixes restore on a KVM LE host. Qemu also needs a fix for
this :

     http://lists.nongnu.org/archive/html/qemu-ppc/2014-11/msg00008.htmlSigned-off-by: NCédric Le Goater <clg@fr.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

This fixes some inaccuracies in the state machine for the virtualized
ICP when implementing the H_IPI hcall (Set_MFFR and related states):

1. The old code wipes out any pending interrupts when the new MFRR is
   more favored than the CPPR but less favored than a pending
   interrupt (by always modifying xisr and the pending_pri). This can
   cause us to lose a pending external interrupt.

   The correct code here is to only modify the pending_pri and xisr in
   the ICP if the MFRR is equal to or more favored than the current
   pending pri (since in this case, it is guaranteed that that there
   cannot be a pending external interrupt). The code changes are
   required in both kvmppc_rm_h_ipi and kvmppc_h_ipi.

2. Again, in both kvmppc_rm_h_ipi and kvmppc_h_ipi, there is a check
   for whether MFRR is being made less favored AND further if new MFFR
   is also less favored than the current CPPR, we check for any
   resends pending in the ICP. These checks look like they are
   designed to cover the case where if the MFRR is being made less
   favored, we opportunistically trigger a resend of any interrupts
   that had been previously rejected. Although, this is not a state
   described by PAPR, this is an action we actually need to do
   especially if the CPPR is already at 0xFF.  Because in this case,
   the resend bit will stay on until another ICP state change which
   may be a long time coming and the interrupt stays pending until
   then. The current code which checks for MFRR < CPPR is broken when
   CPPR is 0xFF since it will not get triggered in that case.

   Ideally, we would want to do a resend only if

   	prio(pending_interrupt) < mfrr && prio(pending_interrupt) < cppr

   where pending interrupt is the one that was rejected. But we don't
   have the priority of the pending interrupt state saved, so we
   simply trigger a resend whenever the MFRR is made less favored.

3. In kvmppc_rm_h_ipi, where we save state to pass resends to the
   virtual mode, we also need to save the ICP whose need_resend we
   reset since this does not need to be my ICP (vcpu->arch.icp) as is
   incorrectly assumed by the current code. A new field rm_resend_icp
   is added to the kvmppc_icp structure for this purpose.
Signed-off-by: NSuresh Warrier <warrier@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

Testing with KSM active in the host showed occasional corruption of
guest memory.  Typically a page that should have contained zeroes
would contain values that look like the contents of a user process
stack (values such as 0x0000_3fff_xxxx_xxx).

Code inspection in kvmppc_h_protect revealed that there was a race
condition with the possibility of granting write access to a page
which is read-only in the host page tables.  The code attempts to keep
the host mapping read-only if the host userspace PTE is read-only, but
if that PTE had been temporarily made invalid for any reason, the
read-only check would not trigger and the host HPTE could end up
read-write.  Examination of the guest HPT in the failure situation
revealed that there were indeed shared pages which should have been
read-only that were mapped read-write.

To close this race, we don't let a page go from being read-only to
being read-write, as far as the real HPTE mapping the page is
concerned (the guest view can go to read-write, but the actual mapping
stays read-only).  When the guest tries to write to the page, we take
an HDSI and let kvmppc_book3s_hv_page_fault take care of providing a
writable HPTE for the page.

This eliminates the occasional corruption of shared pages
that was previously seen with KSM active.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When we get an HMI (hypervisor maintenance interrupt) while in a
guest, we see that guest enters into paused state.  The reason is, in
kvmppc_handle_exit_hv it falls through default path and returns to
host instead of resuming guest.  This causes guest to enter into
paused state.  HMI is a hypervisor only interrupt and it is safe to
resume the guest since the host has handled it already.  This patch
adds a switch case to resume the guest.

Without this patch we see guest entering into paused state with following
console messages:

[ 3003.329351] Severe Hypervisor Maintenance interrupt [Recovered]
[ 3003.329356]  Error detail: Timer facility experienced an error
[ 3003.329359] 	HMER: 0840000000000000
[ 3003.329360] 	TFMR: 4a12000980a84000
[ 3003.329366] vcpu c0000007c35094c0 (40):
[ 3003.329368] pc  = c0000000000c2ba0  msr = 8000000000009032  trap = e60
[ 3003.329370] r 0 = c00000000021ddc0  r16 = 0000000000000046
[ 3003.329372] r 1 = c00000007a02bbd0  r17 = 00003ffff27d5d98
[ 3003.329375] r 2 = c0000000010980b8  r18 = 00001fffffc9a0b0
[ 3003.329377] r 3 = c00000000142d6b8  r19 = c00000000142d6b8
[ 3003.329379] r 4 = 0000000000000002  r20 = 0000000000000000
[ 3003.329381] r 5 = c00000000524a110  r21 = 0000000000000000
[ 3003.329383] r 6 = 0000000000000001  r22 = 0000000000000000
[ 3003.329386] r 7 = 0000000000000000  r23 = c00000000524a110
[ 3003.329388] r 8 = 0000000000000000  r24 = 0000000000000001
[ 3003.329391] r 9 = 0000000000000001  r25 = c00000007c31da38
[ 3003.329393] r10 = c0000000014280b8  r26 = 0000000000000002
[ 3003.329395] r11 = 746f6f6c2f68656c  r27 = c00000000524a110
[ 3003.329397] r12 = 0000000028004484  r28 = c00000007c31da38
[ 3003.329399] r13 = c00000000fe01400  r29 = 0000000000000002
[ 3003.329401] r14 = 0000000000000046  r30 = c000000003011e00
[ 3003.329403] r15 = ffffffffffffffba  r31 = 0000000000000002
[ 3003.329404] ctr = c00000000041a670  lr  = c000000000272520
[ 3003.329405] srr0 = c00000000007e8d8 srr1 = 9000000000001002
[ 3003.329406] sprg0 = 0000000000000000 sprg1 = c00000000fe01400
[ 3003.329407] sprg2 = c00000000fe01400 sprg3 = 0000000000000005
[ 3003.329408] cr = 48004482  xer = 2000000000000000  dsisr = 42000000
[ 3003.329409] dar = 0000010015020048
[ 3003.329410] fault dar = 0000010015020048 dsisr = 42000000
[ 3003.329411] SLB (8 entries):
[ 3003.329412]   ESID = c000000008000000 VSID = 40016e7779000510
[ 3003.329413]   ESID = d000000008000001 VSID = 400142add1000510
[ 3003.329414]   ESID = f000000008000004 VSID = 4000eb1a81000510
[ 3003.329415]   ESID = 00001f000800000b VSID = 40004fda0a000d90
[ 3003.329416]   ESID = 00003f000800000c VSID = 400039f536000d90
[ 3003.329417]   ESID = 000000001800000d VSID = 0001251b35150d90
[ 3003.329417]   ESID = 000001000800000e VSID = 4001e46090000d90
[ 3003.329418]   ESID = d000080008000019 VSID = 40013d349c000400
[ 3003.329419] lpcr = c048800001847001 sdr1 = 0000001b19000006 last_inst = ffffffff
[ 3003.329421] trap=0xe60 | pc=0xc0000000000c2ba0 | msr=0x8000000000009032
[ 3003.329524] Severe Hypervisor Maintenance interrupt [Recovered]
[ 3003.329526]  Error detail: Timer facility experienced an error
[ 3003.329527] 	HMER: 0840000000000000
[ 3003.329527] 	TFMR: 4a12000980a94000
[ 3006.359786] Severe Hypervisor Maintenance interrupt [Recovered]
[ 3006.359792]  Error detail: Timer facility experienced an error
[ 3006.359795] 	HMER: 0840000000000000
[ 3006.359797] 	TFMR: 4a12000980a84000

 Id    Name                           State
----------------------------------------------------
 2     guest2                         running
 3     guest3                         paused
 4     guest4                         running
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

The B (segment size) field in the RB operand for the tlbie
instruction is two bits, which we get from the top two bits of
the first doubleword of the HPT entry to be invalidated.  These
bits go in bits 8 and 9 of the RB operand (bits 54 and 55 in IBM
bit numbering).

The compute_tlbie_rb() function gets these bits as v >> (62 - 8),
which is not correct as it will bring in the top 10 bits, not
just the top two.  These extra bits could corrupt the AP, AVAL
and L fields in the RB value.  To fix this we shift right 62 bits
and then shift left 8 bits, so we only get the two bits of the
B field.

The first doubleword of the HPT entry is under the control of the
guest kernel.  In fact, Linux guests will always put zeroes in bits
54 -- 61 (IBM bits 2 -- 9), but we should not rely on guests doing
this.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NAlexander Graf <agraf@suse.de>

In kvm_test_clear_dirty(), if we find an invalid HPTE we move on to the
next HPTE without unlocking the invalid one.  In fact we should never
find an invalid and unlocked HPTE in the rmap chain, but for robustness
we should unlock it.  This adds the missing unlock.
Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>

When injecting an IRQ, we only document which IRQ priority (which translates
to IRQ type) gets injected. However, when reading traces you don't necessarily
have all the numbers in your head to know which IRQ really is meant.

This patch converts the IRQ number field to a symbolic name that is in sync
with the respective define. That way it's a lot easier for readers to figure
out what interrupt gets injected.
Signed-off-by: NAlexander Graf <agraf@suse.de>

We received a report of warning in kernel/sched/core.c where the sched
group was NULL on an LPAR after a topology update. This seems to occur
because after the topology update has moved the CPUs, cpu_to_node is
returning the old value still, which ends up breaking the consistency of
the NUMA topology in the per-cpu maps. Ensure that we update the per-cpu
fields when we re-map CPUs.
Signed-off-by: NNishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

There isn't any need to keep referring to update->cpu, as we've already
checked cpu == update->cpu at this point.
Signed-off-by: NNishanth Aravamudan <nacc@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Andy reported that the current state of event_idx is rather confused.
So remove all but the x86_pmu implementation and change the default to
return 0 (the safe option).
Reported-by: NAndy Lutomirski <luto@amacapital.net>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Cody P Schafer <cody@linux.vnet.ibm.com>
Cc: Cody P Schafer <dev@codyps.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Himangi Saraogi <himangi774@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: sukadev@linux.vnet.ibm.com <sukadev@linux.vnet.ibm.com>
Cc: Thomas Huth <thuth@linux.vnet.ibm.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux390@de.ibm.com
Cc: linuxppc-dev@lists.ozlabs.org
Cc: linux-s390@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

This patch makes copro_calculate_slb() mask the ESID by the correct mask
for 1T vs 256M segments.

This has no effect by itself as the extra bits were ignored, but it
makes debugging the segment table entries easier and means that we can
directly compare the ESID values for duplicates without needing to worry
about masking in the comparison.

This will be used to simplify a comparison in the following patch.
Signed-off-by: NIan Munsie <imunsie@au1.ibm.com>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This reverts commit bf7588a0.

Ben says although the code is not correct "[this] fix was completely
wrong and does more damages than it fixes things."
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Currently, we can't call opal wrappers from modules when using the LE
ABIv2, which requires a TOC init. If we do we'll try and load the opal
entry point using the wrong toc and probably explode or worse jump to
the wrong address.

Nothing in upstream is making opal calls from a module, but we do export
one of the wrappers so we should fix this anyway.

This change uses the _GLOBAL_TOC() macro (rather than _GLOBAL) for the
opal wrappers, so that we can do non-local calls to them.
Signed-off-by: NJeremy Kerr <jk@ozlabs.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This patch wires up the new syscall sys_bpf() on powerpc.

Passes the tests in samples/bpf:

    #0 add+sub+mul OK
    #1 unreachable OK
    #2 unreachable2 OK
    #3 out of range jump OK
    #4 out of range jump2 OK
    #5 test1 ld_imm64 OK
    #6 test2 ld_imm64 OK
    #7 test3 ld_imm64 OK
    #8 test4 ld_imm64 OK
    #9 test5 ld_imm64 OK
    #10 no bpf_exit OK
    #11 loop (back-edge) OK
    #12 loop2 (back-edge) OK
    #13 conditional loop OK
    #14 read uninitialized register OK
    #15 read invalid register OK
    #16 program doesn't init R0 before exit OK
    #17 stack out of bounds OK
    #18 invalid call insn1 OK
    #19 invalid call insn2 OK
    #20 invalid function call OK
    #21 uninitialized stack1 OK
    #22 uninitialized stack2 OK
    #23 check valid spill/fill OK
    #24 check corrupted spill/fill OK
    #25 invalid src register in STX OK
    #26 invalid dst register in STX OK
    #27 invalid dst register in ST OK
    #28 invalid src register in LDX OK
    #29 invalid dst register in LDX OK
    #30 junk insn OK
    #31 junk insn2 OK
    #32 junk insn3 OK
    #33 junk insn4 OK
    #34 junk insn5 OK
    #35 misaligned read from stack OK
    #36 invalid map_fd for function call OK
    #37 don't check return value before access OK
    #38 access memory with incorrect alignment OK
    #39 sometimes access memory with incorrect alignment OK
    #40 jump test 1 OK
    #41 jump test 2 OK
    #42 jump test 3 OK
    #43 jump test 4 OK
Signed-off-by: NPranith Kumar <bobby.prani@gmail.com>
[mpe: test using samples/bpf]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Remove the check of CONFIG_PPC_SUBPAGE_PROT when deciding if
is_hugepage_only_range() is extern or inline. The extern version is in
slice.c and is built if CONFIG_PPC_MM_SLICES=y.

There was no build break possible because CONFIG_PPC_SUBPAGE_PROT is
only selectable under conditions which also mean CONFIG_PPC_MM_SLICES
will be selected.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

arch/powerpc/mm/slice.c:704:5: error: expected identifier or ‘(’ before numeric constant
 int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
     ^
make[1]: *** [arch/powerpc/mm/slice.o] Error 1
make: *** [arch/powerpc/mm/slice.o] Error 2

This got introduced via 1217d34b
"powerpc: Ensure global functions include their prototype". We
started including linux/hugetlb.h with that patch and now we have

 #define is_hugepage_only_range(mm, addr, len)	0

with hugetlbfs disabled.

Fixes: 1217d34b ("powerpc: Ensure global functions include their prototype")
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Scott's patch 1c98025c "Dynamic DMA zone limits" changed
dma_direct_alloc_coherent() to start using dev->coherent_dma_mask.

That seems fair enough, but it exposes the fact that some of the drivers
we care about on IBM platforms aren't setting the coherent mask.

The proper fix is to have drivers set the coherent mask and also have
the platform code honor it.

For now, just restrict the dynamic DMA zone limits to the platforms that
need it.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Acked-by: NScott Wood <scottwood@freescale.com>

Now KVM is working on LE, enable it. Also enable transarent
hugepage which has already been enabled on BE.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Commit 0b0b0893 "of/pci: Fix the conversion of IO ranges into IO
resources" changed the behaviour of of_pci_range_to_resource().

Previously it simply populated the resource based on the arguments. Now
it calls pci_register_io_range() and pci_address_to_pio(). These both
have two implementations depending on whether PCI_IOBASE is defined,
which it is not for powerpc.

Further complicating matters, both routines are weak, and powerpc
implements it's own version of one - pci_address_to_pio(). However
powerpc's implementation depends on other initialisations which are done
later in boot.

The end result is incorrectly initialised IO space. Often we can get
away with that, because we don't make much use of IO space. However
virtio requires it, so we see eg:

  pci_bus 0000:00: root bus resource [io  0xffff] (bus address [0xffffffffffffffff-0xffffffffffffffff])
  PCI: Cannot allocate resource region 0 of device 0000:00:01.0, will remap
  virtio-pci 0000:00:01.0: can't enable device: BAR 0 [io  size 0x0020] not assigned

The simplest fix for now is to just stop using of_pci_range_to_resource(),
and open-code the original implementation, that's all we want it to do.

Fixes: 0b0b0893 ("of/pci: Fix the conversion of IO ranges into IO resources")
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The associativity domain numbers are obtained from the hypervisor through
registers and written into memory by the guest: the packed array passed to
vphn_unpack_associativity() is then native-endian, unlike what was assumed
in the following commit:

commit b08a2a12
Author: Alistair Popple <alistair@popple.id.au>
Date:   Wed Aug 7 02:01:44 2013 +1000

    powerpc: Make NUMA device node code endian safe

This issue fills the topology with bogus data and makes it unusable. It may
lead to severe performance breakdowns.

We should ideally patch the vphn_unpack_associativity() function to do the
64-bit loads, but this requires some more brain storming.

In the meantime, let's go for a suboptimal and temporary bug fix: this patch
converts each 64-bit value of the packed array to big endian, as expected by
the current parsing code in vphn_unpack_associativity().
Signed-off-by: NGreg Kurz <gkurz@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

As demonstrated in the previous commit, the failure message from the msi
bitmap selftests is a bit subtle, it's easy to miss a failure in a busy
boot log.

So drop our check() macro and use WARN_ON() instead. This necessitates
inverting all the conditions as well.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When we added the alignment tests recently we failed to check they were
actually passing - oops.

They weren't passing, because the bitmap was full. We should also be a
bit more careful when checking the return code, a negative error return
could by divisible by our alignment value.

Fixes: b0345bbc ("powerpc/msi: Improve IRQ bitmap allocator")
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The Broadcom Shiner 2-ports 10G ethernet adapter has same problem
commit 6f20bda0 ("powerpc/eeh: Block PCI config access upon frozen
PE") fixes. Put it to the black list as well.

   # lspci -s 0004:01:00.0
   0004:01:00.0 Ethernet controller: Broadcom Corporation \
                NetXtreme II BCM57810 10 Gigabit Ethernet (rev 10)
   # lspci -n -s 0004:01:00.0
   0004:01:00.0 0200: 14e4:168e (rev 10)
Reported-by: NJohn Walthour <jwalthour@us.ibm.com>
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When the PE's config space is marked as blocked, PCI config read
requests always return 0xFF's. It's pointless to collect logs in
this case.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The problem was found when I tried to inject PCI config error by
PHB3 PAPR error injection registers into Broadcom Austin 4-ports
NIC adapter. The frozen PE was reported successfully and EEH core
started to recover it. However, I run into fenced PHB when dumping
PCI config space as EEH logs. I was told that PCI config requests
should not be progagated to the adapter until PE reset is done
successfully. Otherise, we would run out of PHB internal credits
and trigger PCT (PCIE Completion Timeout), which leads to the
fenced PHB.

The patch introduces another PE flag EEH_PE_CFG_RESTRICTED, which
is set during PE initialization time if the PE includes the specific
PCI devices that need block PCI config access until PE reset is done.
When the PE becomes frozen for the first time, EEH_PE_CFG_BLOCKED is
set if the PE has flag EEH_PE_CFG_RESTRICTED. Then the PCI config
access to the PE will be dropped by platform PCI accessors until
PE reset is done successfully. The mechanism is shared by PowerNV
platform owned PE or userland owned ones. It's not used on pSeries
platform yet.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The pSeires EEH config accessors rely on rtas_{read, write}_config()
and the condition to check if the PE's config space is blocked
should be moved to those 2 functions so that config requests from
kernel, userland, EEH core can be dropped to avoid recursive EEH error
if necessary.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

It's bad idea to access the PCI config registers of the adapters,
which is experiencing reset. It leads to recursive EEH error without
exception. The patch drops PCI config requests in EEH accessors if
the PE has been marked to accept PCI config requests, for example
during PE reseet time.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The flag EEH_PE_RESET indicates blocking config space of the PE
during reset time. We potentially need block PE's config space
other than reset time. So it's reasonable to replace it with
EEH_PE_CFG_BLOCKED to indicate its usage.

There are no substantial code or logic changes in this patch.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Function eeh_pe_state_mark() could possibly have combination of
multiple EEH PE state as its argument. The patch fixes the condition
used to check if EEH_PE_ISOLATED is included.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

- ibm,rtas-configure-connector should treat the RTAS data as big endian.
- Treat ibm,ppc-interrupt-server#s as big-endian when setting
  smp_processor_id during hotplug.
Signed-off-by: NBharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Acked-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We can use the simpler dump_stack() instead of
show_stack(current, __get_SP())
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Michael points out that __get_SP() is a pretty horrible
function name. Let's give it a better name.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>