- 02 4月, 2013 2 次提交
-
-
由 Dmitry Torokhov 提交于
Reported-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Mathieu J. Poirier 提交于
Some devices have too few buttons, which it makes it hard to have a reset combo that won't trigger automatically. As such a timeout functionality that requires the combination to be held for a given amount of time before triggering is introduced. If a key combo is recognized and held for a 'timeout' amount of time, the system triggers a reset. If the timeout value is omitted the driver simply ignores the functionality. Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 31 3月, 2013 6 次提交
-
-
由 Laxman Dewangan 提交于
NVIDIA's Tegra20 and Tegra30 supports the 16x8 keyboard matrix and T114 support the 11x8 Key matrix. Add support for defining the maximum row/columns based on SoC through proper compatibility. Signed-off-by: NLaxman Dewangan <ldewangan@nvidia.com> Reviewed-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Fabio Estevam 提交于
Using devm_ functions can make the code cleaner and simpler. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Mischa Jonker 提交于
Add match table for device tree binding and dts binding doc. Signed-off-by: NMischa Jonker <mjonker@synopsys.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Sebastien Royen 提交于
Event value is wrong. Should be in range -2048 to 2047, but is in range 0 to 4095. Use s8 to int conversion and remove 0xfff mask. Signed-off-by: NSebastien Royen <sebastien.royen@armadeus.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Sachin Kamat 提交于
'pdata' is already dereferenced earlier. Hence this check is meaningless. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Sachin Kamat 提交于
kfree on a null pointer is a no-op. Hence null check is not necessary. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 27 3月, 2013 2 次提交
-
-
由 Jingoo Han 提交于
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/input/misc/ad714x-i2c.c:17:12: warning: 'ad714x_i2c_suspend' defined but not used [-Wunused-function] drivers/input/misc/ad714x-i2c.c:22:12: warning: 'ad714x_i2c_resume' defined but not used [-Wunused-function] drivers/input/misc/ad714x-spi.c:20:12: warning: 'ad714x_spi_suspend' defined but not used [-Wunused-function] drivers/input/misc/ad714x-spi.c:25:12: warning: 'ad714x_spi_resume' defined but not used [-Wunused-function] Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Jingoo Han 提交于
Add CONFIG_PM_SLEEP to suspend/resume functions to fix the following build warning when CONFIG_PM_SLEEP is not selected. This is because sleep PM callbacks defined by SIMPLE_DEV_PM_OPS are only used when the CONFIG_PM_SLEEP is enabled. drivers/input/misc/adxl34x-spi.c:98:12: warning: 'adxl34x_spi_suspend' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-spi.c:108:12: warning: 'adxl34x_spi_resume' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-i2c.c:109:12: warning: 'adxl34x_i2c_suspend' defined but not used [-Wunused-function] drivers/input/misc/adxl34x-i2c.c:119:12: warning: 'adxl34x_i2c_resume' defined but not used [-Wunused-function] Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 18 3月, 2013 15 次提交
-
-
由 Fabio Porcedda 提交于
This patch converts the drivers to use the module_platform_driver_probe() macro which makes the code smaller and a bit simpler. Signed-off-by: NFabio Porcedda <fabio.porcedda@gmail.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Sachin Kamat 提交于
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Sachin Kamat 提交于
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Sachin Kamat 提交于
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Sachin Kamat 提交于
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Sachin Kamat 提交于
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Sachin Kamat 提交于
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Sachin Kamat 提交于
module_platform_driver_probe() eliminates the boilerplate and simplifies the code. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Sachin Kamat 提交于
module_platform_driver_probe() simplifies the code by eliminating boilerplate code. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Sachin Kamat 提交于
Use the newly introduced devm_ioremap_resource() instead of devm_request_and_ioremap() which provides more consistent error handling. devm_ioremap_resource() provides its own error messages; so all explicit error messages can be removed from the failure code paths. Signed-off-by: NSachin Kamat <sachin.kamat@linaro.org> Reviewed-by: NThierry Reding <thierry.reding@avionic-design.de> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Dmitry Torokhov 提交于
Merge with mainline to bring in module_platform_driver_probe() and devm_ioremap_resource().
-
由 Linus Torvalds 提交于
-
由 David Rientjes 提交于
Commit 1d9d8639 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") introduces a link failure since perf_restore_debug_store() is only defined for CONFIG_CPU_SUP_INTEL: arch/x86/power/built-in.o: In function `restore_processor_state': (.text+0x45c): undefined reference to `perf_restore_debug_store' Fix it by defining the dummy function appropriately. Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
Commit 1d9d8639 ("perf,x86: fix kernel crash with PEBS/BTS after suspend/resume") fixed a crash when doing PEBS performance profiling after resuming, but in using init_debug_store_on_cpu() to restore the DS_AREA mtrr it also resulted in a new WARN_ON() triggering. init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU cross-calls to do the MSR update. Which is not really valid at the early resume stage, and the warning is quite reasonable. Now, it all happens to _work_, for the simple reason that smp_call_function_single() ends up just doing the call directly on the CPU when the CPU number matches, but we really should just do the wrmsr() directly instead. This duplicates the wrmsr() logic, but hopefully we can just remove the wrmsr_on_cpu() version eventually. Reported-and-tested-by: NParag Warudkar <parag.lkml@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
Pull btrfs fixes from Chris Mason: "Eric's rcu barrier patch fixes a long standing problem with our unmount code hanging on to devices in workqueue helpers. Liu Bo nailed down a difficult assertion for in-memory extent mappings." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: Btrfs: fix warning of free_extent_map Btrfs: fix warning when creating snapshots Btrfs: return as soon as possible when edquot happens Btrfs: return EIO if we have extent tree corruption btrfs: use rcu_barrier() to wait for bdev puts at unmount Btrfs: remove btrfs_try_spin_lock Btrfs: get better concurrency for snapshot-aware defrag work
-
- 16 3月, 2013 9 次提交
-
-
由 Liu Bo 提交于
Users report that an extent map's list is still linked when it's actually going to be freed from cache. The story is that a) when we're going to drop an extent map and may split this large one into smaller ems, and if this large one is flagged as EXTENT_FLAG_LOGGING which means that it's on the list to be logged, then the smaller ems split from it will also be flagged as EXTENT_FLAG_LOGGING, and this is _not_ expected. b) we'll keep ems from unlinking the list and freeing when they are flagged with EXTENT_FLAG_LOGGING, because the log code holds one reference. The end result is the warning, but the truth is that we set the flag EXTENT_FLAG_LOGGING only during fsync. So clear flag EXTENT_FLAG_LOGGING for extent maps split from a large one. Reported-by: NJohannes Hirte <johannes.hirte@fem.tu-ilmenau.de> Reported-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NLiu Bo <bo.li.liu@oracle.com> Signed-off-by: NChris Mason <chris.mason@fusionio.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
Pull kbuild fix from Michal Marek: "One fix for for make headers_install/headers_check to not require make 3.81. The requirement has been accidentally introduced in 3.7." * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: fix make headers_check with make 3.80
-
git://openrisc.net/jonas/linux由 Linus Torvalds 提交于
Pull OpenRISC bug fixes from Jonas Bonn: - The GPIO descriptor work has exposed how broken the non-GPIOLIB bits for OpenRISC were. We now require GPIOLIB as this is the preferred way forward. - The system.h split introduced a bug in llist.h for arches using asm-generic/cmpxchg.h directly, which is currently only OpenRISC. The patch here moves two defines from asm-generic/atomic.h to asm-generic/cmpxchg.h to make things work as they should. - The VIRT_TO_BUS selector was added for OpenRISC, but OpenRISC does not have the virt_to_bus methods, so there's a patch to remove it again. * tag 'for-3.9-rc3' of git://openrisc.net/jonas/linux: openrisc: remove HAVE_VIRT_TO_BUS asm-generic: move cmpxchg*_local defs to cmpxchg.h openrisc: require gpiolib
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc由 Linus Torvalds 提交于
Pull char/misc fixes from Greg Kroah-Hartman: "Here are some tiny fixes for the w1 drivers and the final removal patch for getting rid of CONFIG_EXPERIMENTAL (all users of it are now gone from your tree, this just drops the Kconfig item itself.) All have been in the linux-next tree for a while" * tag 'char-misc-3.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: final removal of CONFIG_EXPERIMENTAL w1: fix oops when w1_search is called from netlink connector w1-gpio: fix unused variable warning w1-gpio: remove erroneous __exit and __exit_p() ARM: w1-gpio: fix erroneous gpio requests
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
Pull sound fixes from Takashi Iwai: "A collection of small fixes, as expected for the middle rc: - A couple of fixes for potential NULL dereferences and out-of-range array accesses revealed by static code parsers - A fix for the wrong error handling detected by trinity - A regression fix for missing audio on some MacBooks - CA0132 DSP loader fixes - Fix for EAPD control of IDT codecs on machines w/o speaker - Fix a regression in the HD-audio widget list parser code - Workaround for the NuForce UDH-100 USB audio" * tag 'sound-3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Fix missing EAPD/GPIO setup for Cirrus codecs sound: sequencer: cap array index in seq_chn_common_event() ALSA: hda/ca0132 - Remove extra setting of dsp_state. ALSA: hda/ca0132 - Check download state of DSP. ALSA: hda/ca0132 - Check if dspload_image succeeded. ALSA: hda - Disable IDT eapd_switch if there are no internal speakers ALSA: hda - Fix snd_hda_get_num_raw_conns() to return a correct value ALSA: usb-audio: add a workaround for the NuForce UDH-100 ALSA: asihpi - fix potential NULL pointer dereference ALSA: seq: Fix missing error handling in snd_seq_timer_open()
-
git://git.linaro.org/people/mszyprowski/linux-dma-mapping由 Linus Torvalds 提交于
Pull DMA-mapping fix from Marek Szyprowski: "An important fix for all ARM architectures which use ZONE_DMA. Without it dma_alloc_* calls with GFP_ATOMIC flag might have allocated buffers outsize DMA zone." * 'fixes-for-3.9' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: DMA-mapping: add missing GFP_DMA flag for atomic buffer allocation
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes由 Linus Torvalds 提交于
Pull MFD fixes from Samuel Ortiz: "This is the first batch of MFD fixes for 3.9. With this one we have: - An ab8500 build failure fix. - An ab8500 device tree parsing fix. - A fix for twl4030_madc remove routine to work properly (when built-in). - A fix for properly registering palmas interrupt handler. - A fix for omap-usb init routine to actually write into the hostconfig register. - A couple of warning fixes for ab8500-gpadc and tps65912" * tag 'mfd-fixes-3.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes: mfd: twl4030-madc: Remove __exit_p annotation mfd: ab8500: Kill "reg" property from binding mfd: ab8500-gpadc: Complain if we fail to enable vtvout LDO mfd: wm831x: Don't forward declare enum wm831x_auxadc mfd: twl4030-audio: Fix argument type for twl4030_audio_disable_resource() mfd: tps65912: Declare and use tps65912_irq_exit() mfd: palmas: Provide irq flags through DT/platform data mfd: Make AB8500_CORE select POWER_SUPPLY to fix build error mfd: omap-usb-host: Actually update hostconfig
-
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging由 Linus Torvalds 提交于
Pull hwmon fixes from Guenter Roeck: "Bug fixes for pmbus, ltc2978, and lineage-pem drivers Added specific maintainer for some hwmon drivers" * tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (pmbus/ltc2978) Fix temperature reporting hwmon: (pmbus) Fix krealloc() misuse in pmbus_add_attribute() hwmon: (lineage-pem) Add missing terminating entry for pem_[input|fan]_attributes MAINTAINERS: Add maintainer for MAX6697, INA209, and INA2XX drivers
-
由 Stephane Eranian 提交于
This patch fixes a kernel crash when using precise sampling (PEBS) after a suspend/resume. Turns out the CPU notifier code is not invoked on CPU0 (BP). Therefore, the DS_AREA (used by PEBS) is not restored properly by the kernel and keeps it power-on/resume value of 0 causing any PEBS measurement to crash when running on CPU0. The workaround is to add a hook in the actual resume code to restore the DS Area MSR value. It is invoked for all CPUS. So for all but CPU0, the DS_AREA will be restored twice but this is harmless. Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 15 3月, 2013 6 次提交
-
-
由 Takashi Iwai 提交于
During the transition to the generic parser, the hook to the codec specific automute function was forgotten. This resulted in the silent output on some MacBooks. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dan Carpenter 提交于
"chn" here is a number between 0 and 255, but ->chn_info[] only has 16 elements so there is a potential write beyond the end of the array. If the seq_mode isn't SEQ_2 then we let the individual drivers (either opl3.c or midi_synth.c) handle it. Those functions all do a bounds check on "chn" so I haven't changed anything here. The opl3.c driver has up to 18 channels and not 16. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Arnd Bergmann 提交于
4740f73f "mfd: remove use of __devexit" removed the __devexit annotation on the twl4030_madc_remove function, but left an __exit_p() present on the pointer to this function. Using __exit_p was as wrong with the devexit in place as it is now, but now we get a gcc warning about an unused function. In order for the twl4030_madc_remove to work correctly in built-in code, we have to remove the __exit_p. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NSamuel Ortiz <sameo@linux.intel.com>
-
由 Dylan Reid 提交于
spec->dsp_state is initialized to DSP_DOWNLOAD_INIT, no need to reset and check it in ca0132_download_dsp(). Signed-off-by: NDylan Reid <dgreid@chromium.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dylan Reid 提交于
Instead of using the dspload_is_loaded() function, check the dsp_state that is kept in the spec. The dspload_is_loaded() function returns true if the DSP transfer was never started. This false-positive leads to multiple second delays when ca0132_setup_efaults() times out on each write. Signed-off-by: NDylan Reid <dgreid@chromium.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dylan Reid 提交于
If dspload_image() fails, it was ignored and dspload_wait_loaded() was still called. dsp_loaded should never be set to true in this case, skip it. The check in dspload_wait_loaded() return true if the DSP is loaded or if it never started. Signed-off-by: NDylan Reid <dgreid@chromium.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-