Implement the hypervisor side of the KVM PTP interface.

The service offers wall time and cycle count from host to guest.
The caller must specify whether they want the host's view of
either the virtual or physical counter.
Signed-off-by: NJianyong Wu <jianyong.wu@arm.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201209060932.212364-7-jianyong.wu@arm.com

KVM/arm64 has forever used a 40bit default IPA space, partially
due to its 32bit heritage (where the only choice is 40bit).

However, there are implementations in the wild that have a *cough*
much smaller *cough* IPA space, which leads to a misprogramming of
VTCR_EL2, and a guest that is stuck on its first memory access
if userspace dares to ask for the default IPA setting (which most
VMMs do).

Instead, blundly reject the creation of such VM, as we can't
satisfy the requirements from userspace (with a one-off warning).
Also clarify the boot warning, and document that the VM creation
will fail when an unsupported IPA size is provided.

Although this is an ABI change, it doesn't really change much
for userspace:

- the guest couldn't run before this change, but no error was
  returned. At least userspace knows what is happening.

- a memory slot that was accepted because it did fit the default
  IPA space now doesn't even get a chance to be registered.

The other thing that is left doing is to convince userspace to
actually use the IPA space setting instead of relying on the
antiquated default.

Fixes: 233a7cb2 ("kvm: arm64: Allow tuning the physical address size for VM")
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Reviewed-by: NAndrew Jones <drjones@redhat.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20210311100016.3830038-2-maz@kernel.org

USB devices cannot perform DMA and hence have no dma_mask set in their
device structure. Therefore importing dmabuf into a USB-based driver
fails, which breaks joining and mirroring of display in X11.

For USB devices, pick the associated USB controller as attachment device.
This allows the DRM import helpers to perform the DMA setup. If the DMA
controller does not support DMA transfers, we're out of luck and cannot
import. Our current USB-based DRM drivers don't use DMA, so the actual
DMA device is not important.

Tested by joining/mirroring displays of udl and radeon under Gnome/X11.

v8:
	* release dmadev if device initialization fails (Noralf)
	* fix commit description (Noralf)
v7:
	* fix use-before-init bug in gm12u320 (Dan)
v6:
	* implement workaround in DRM drivers and hold reference to
	  DMA device while USB device is in use
	* remove dev_is_usb() (Greg)
	* collapse USB helper into usb_intf_get_dma_device() (Alan)
	* integrate Daniel's TODO statement (Daniel)
	* fix typos (Greg)
v5:
	* provide a helper for USB interfaces (Alan)
	* add FIXME item to documentation and TODO list (Daniel)
v4:
	* implement workaround with USB helper functions (Greg)
	* use struct usb_device->bus->sysdev as DMA device (Takashi)
v3:
	* drop gem_create_object
	* use DMA mask of USB controller, if any (Daniel, Christian, Noralf)
v2:
	* move fix to importer side (Christian, Daniel)
	* update SHMEM and CMA helpers for new PRIME callbacks
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Fixes: 6eb0233e ("usb: don't inherity DMA properties for USB devices")
Tested-by: NPavel Machek <pavel@ucw.cz>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NChristian König <christian.koenig@amd.com>
Acked-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NNoralf Trønnes <noralf@tronnes.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: <stable@vger.kernel.org> # v5.10+
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210303133229.3288-1-tzimmermann@suse.deSigned-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>

Add the ingenic,jz4760b-intc compatible string with a fallback to the
ingenic,jz4760-intc compatible string.
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Acked-by: NRob Herring <robh@kernel.org>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210307172014.73481-1-paul@crapouillou.net

Leave it to Greg.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is how Xen guests do steal time accounting. The hypervisor records
the amount of time spent in each of running/runnable/blocked/offline
states.

In the Xen accounting, a vCPU is still in state RUNSTATE_running while
in Xen for a hypercall or I/O trap, etc. Only if Xen explicitly schedules
does the state become RUNSTATE_blocked. In KVM this means that even when
the vCPU exits the kvm_run loop, the state remains RUNSTATE_running.

The VMM can explicitly set the vCPU to RUNSTATE_blocked by using the
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT attribute, and can also use
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST to retrospectively add a given
amount of time to the blocked state and subtract it from the running
state.

The state_entry_time corresponds to get_kvmclock_ns() at the time the
vCPU entered the current state, and the total times of all four states
should always add up to state_entry_time.
Co-developed-by: NJoao Martins <joao.m.martins@oracle.com>
Signed-off-by: NJoao Martins <joao.m.martins@oracle.com>
Signed-off-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20210301125309.874953-2-dwmw2@infradead.org>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

It should be 7.23 instead of 7.22, which has already been taken by
KVM_CAP_X86_BUS_LOCK_EXIT.
Signed-off-by: NKai Huang <kai.huang@intel.com>
Message-Id: <20210226094832.380394-1-kai.huang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Correct the comments since bfq_fifo_expire[0] is for async request,
while bfq_fifo_expire[1] is for sync request.
Also update docs, according the source code, the default
fifo_expire_async is 250ms, and fifo_expire_sync is 125ms.
Signed-off-by: NJoseph Qi <joseph.qi@linux.alibaba.com>
Acked-by: NPaolo Valente <paolo.valente@linaro.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch fixes a spelling typo in bonding.rst.
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A couple of media schemas got applied without using or incorrectly
using the video-interfaces.yaml and graph.yaml schemas. Fix them up
before we have more copy-n-paste errors.

Fixes: 41b3e233 ("media: dt-bindings: media: Add bindings for imx334")
Fixes: d899e5f1 ("media: dt-bindings: media: imx258: add bindings for IMX258 sensor")
Fixes: 918b866e ("media: dt-bindings: Remove old ov5647.yaml file, update ovti,ov5647.yaml")
Fixes: 22f2b475 ("media: dt-bindings: media: i2c: Add OV8865 bindings documentation")
Fixes: 29a202fa ("media: dt-bindings: media: i2c: Add OV5648 bindings documentation")
Cc: Sakari Ailus <sakari.ailus@linux.intel.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Dave Stevenson <dave.stevenson@raspberrypi.com>
Cc: Jacopo Mondi <jacopo@jmondi.org>
Cc: "Paul J. Murphy" <paul.j.murphy@intel.com>
Cc: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Cc: linux-media@vger.kernel.org
Signed-off-by: NRob Herring <robh@kernel.org>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: NKrzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20210223210127.55455-1-robh@kernel.org

Patch series "Fix some seq_file users that were recently broken".

A recent change to seq_file broke some users which were using seq_file
in a non-"standard" way ...  though the "standard" isn't documented, so
they can be excused.  The result is a possible leak - of memory in one
case, of references to a 'transport' in the other.

These three patches:
 1/ document and explain the problem
 2/ fix the problem user in x86
 3/ fix the problem user in net/sctp

This patch (of 3):

Users of seq_file will sometimes find it convenient to take a resource,
such as a lock or memory allocation, in the ->start or ->next operations.
These are per-entry resources, distinct from per-session resources which
are taken in ->start and released in ->stop.

The preferred management of these is release the resource on the
subsequent call to ->next or ->stop.

However prior to Commit 1f4aace6 ("fs/seq_file.c: simplify seq_file
iteration code and interface") it happened that ->show would always be
called after ->start or ->next, and a few users chose to release the
resource in ->show.

This is no longer reliable.  Since the mentioned commit, ->next will
always come after a successful ->show (to ensure m->index is updated
correctly), so the original ordering cannot be maintained.

This patch updates the documentation to clearly state the required
behaviour.  Other patches will fix the few problematic users.

[akpm@linux-foundation.org: fix typo, per Willy]

Link: https://lkml.kernel.org/r/161248518659.21478.2484341937387294998.stgit@noble1
Link: https://lkml.kernel.org/r/161248539020.21478.3147971477400875336.stgit@noble1
Fixes: 1f4aace6 ("fs/seq_file.c: simplify seq_file iteration code and interface")
Signed-off-by: NNeilBrown <neilb@suse.de>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a kernel parameter stack_depot_disable to disable stack depot.  So
that stack hash table doesn't consume any memory when stack depot is
disabled.

The use case is CONFIG_PAGE_OWNER without page_owner=on.  Without this
patch, stackdepot will consume the memory for the hashtable.  By default,
it's 8M which is never trivial.

With this option, in CONFIG_PAGE_OWNER configured system, page_owner=off,
stack_depot_disable in kernel command line, we could save the wasted
memory for the hashtable.

[akpm@linux-foundation.org: fix CONFIG_STACKDEPOT=n build]

Link: https://lkml.kernel.org/r/1611749198-24316-2-git-send-email-vjitta@codeaurora.orgSigned-off-by: NVinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: NVijayanand Jitta <vjitta@codeaurora.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yogesh Lal <ylal@codeaurora.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Update contact info.

Link: https://lkml.kernel.org/r/20210206162524.GA11520@kernel.orgSigned-off-by: NMiguel Ojeda <ojeda@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Hwardware tag-based KASAN only reports the first found bug. After that MTE
tag checking gets disabled. Clarify this in comments and documentation.

Link: https://lkml.kernel.org/r/00383ba88a47c3f8342d12263c24bdf95527b07d.1612546384.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NMarco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We cannot rely on CONFIG_DEBUG_KERNEL to decide if we're running a "debug
kernel" where we can safely show potentially sensitive information in the
kernel log.

Instead, simply rely on the newly introduced "no_hash_pointers" to print
unhashed kernel pointers, as well as decide if our reports can include
other potentially sensitive information such as registers and corrupted
bytes.

Link: https://lkml.kernel.org/r/20210223082043.1972742-1-elver@google.comSigned-off-by: NMarco Elver <elver@google.com>
Cc: Timur Tabi <timur@kernel.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add KFENCE test suite, testing various error detection scenarios. Makes
use of KUnit for test organization. Since KFENCE's interface to obtain
error reports is via the console, the test verifies that KFENCE outputs
expected reports to the console.

[elver@google.com: fix typo in test]
  Link: https://lkml.kernel.org/r/X9lHQExmHGvETxY4@elver.google.com
[elver@google.com: show access type in report]
  Link: https://lkml.kernel.org/r/20210111091544.3287013-2-elver@google.com

Link: https://lkml.kernel.org/r/20201103175841.3495947-9-elver@google.comSigned-off-by: NAlexander Potapenko <glider@google.com>
Signed-off-by: NMarco Elver <elver@google.com>
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Co-developed-by: NAlexander Potapenko <glider@google.com>
Reviewed-by: NJann Horn <jannh@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joern Engel <joern@purestorage.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add KFENCE documentation in dev-tools/kfence.rst, and add to index.

[elver@google.com: add missing copyright header to documentation]
  Link: https://lkml.kernel.org/r/20210118092159.145934-4-elver@google.com

Link: https://lkml.kernel.org/r/20201103175841.3495947-8-elver@google.comSigned-off-by: NAlexander Potapenko <glider@google.com>
Signed-off-by: NMarco Elver <elver@google.com>
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Co-developed-by: NAlexander Potapenko <glider@google.com>
Reviewed-by: NJann Horn <jannh@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joern Engel <joern@purestorage.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In commit 53cdc1cb ("drivers/base/memory.c: indicate all memory blocks
as removable") we changed the output of the "removable" property of memory
devices to return "1" if and only if the kernel supports memory offlining.

Let's update documentation, stating that the interface is legacy.  Also
update documentation of the "state" property and "valid_zones" properties.

Link: https://lkml.kernel.org/r/20210201181347.13262-3-david@redhat.comSigned-off-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

No need to store the value for each and every memory block, as we can
easily query the value at runtime.  Reshuffle the members to optimize the
memory layout.  Also, let's clarify what the interface once was used for
and why it's legacy nowadays.

"phys_device" was used on s390x in older versions of lsmem[2]/chmem[3],
back when they were still part of s390x-tools.  They were later replaced
by the variants in linux-utils.  For example, RHEL6 and RHEL7 contain
lsmem/chmem from s390-utils.  RHEL8 switched to versions from util-linux
on s390x [4].

"phys_device" was added with sysfs support for memory hotplug in commit
3947be19 ("[PATCH] memory hotplug: sysfs and add/remove functions") in
2005.  It always returned 0.

s390x started returning something != 0 on some setups (if sclp.rzm is set
by HW) in 2010 via commit 57b552ba ("memory hotplug/s390: set
phys_device").

For s390x, it allowed for identifying which memory block devices belong to
the same storage increment (RZM).  Only if all memory block devices
comprising a single storage increment were offline, the memory could
actually be removed in the hypervisor.

Since commit e5d709bb ("s390/memory hotplug: provide
memory_block_size_bytes() function") in 2013 a memory block device spans
at least one storage increment - which is why the interface isn't really
helpful/used anymore (except by old lsmem/chmem tools).

There were once RFC patches to make use of "phys_device" in ACPI context;
however, the underlying problem could be solved using different interfaces
[1].

[1] https://patchwork.kernel.org/patch/2163871/
[2] https://github.com/ibm-s390-tools/s390-tools/blob/v2.1.0/zconf/lsmem
[3] https://github.com/ibm-s390-tools/s390-tools/blob/v2.1.0/zconf/chmem
[4] https://bugzilla.redhat.com/show_bug.cgi?id=1504134

Link: https://lkml.kernel.org/r/20210201181347.13262-2-david@redhat.comSigned-off-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Ilya Dryomov <idryomov@gmail.com>
Cc: Vaibhav Jain <vaibhav@linux.ibm.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit c32b1b89 ("KVM: X86: Add the Document for
KVM_CAP_X86_BUS_LOCK_EXIT") added a new flag in kvm_run->flags
documentation, and caused warning in make htmldocs:

  Documentation/virt/kvm/api.rst:5004: WARNING: Unexpected indentation
  Documentation/virt/kvm/api.rst:5004: WARNING: Inline emphasis start-string without end-string

Fix this rst markup issue.
Signed-off-by: NChenyi Qiang <chenyi.qiang@intel.com>
Message-Id: <20210226075541.27179-1-chenyi.qiang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Building the documentation gives a warning that the KVM_PPC_RESIZE_HPT_PREPARE
label is defined twice.  The root cause is that the KVM_PPC_RESIZE_HPT_PREPARE
API is present twice, the second being a mix of the prepare and commit APIs.
Fix it.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Fix indentation snafu in proc.rst as reported by Stephen.

next-20210219/Documentation/filesystems/proc.rst:697: WARNING: Unexpected indentation.

Fixes: 93ea4a0b ("Documentation: proc.rst: add more about the 6 fields in loadavg")
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Link: https://lore.kernel.org/r/20210223060418.21443-1-rdunlap@infradead.orgSigned-off-by: NJonathan Corbet <corbet@lwn.net>

This file has been moved into the "progs" subdirectory, together with all
test BPF programs.

Fixes: bd4aed0e ("selftests: bpf: centre kernel bpf objects under new subdir "progs"")
Signed-off-by: NAntonio Terceiro <antonio.terceiro@linaro.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Zefan Li <lizefan.x@bytedance.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Jiong Wang <jiong.wang@netronome.com>
Link: https://lore.kernel.org/r/20210224131631.349287-1-antonio.terceiro@linaro.orgSigned-off-by: NJonathan Corbet <corbet@lwn.net>

Commit 209b44c8 ("docs: powerpc: syscall64-abi.rst: fix a malformed
table") attempted to fix the formatting of tables in syscall64-abi.rst, but
inadvertently changed some register names.

Redo the tables with the correct register names, and while we're here,
clean things up to separate the registers into different rows and add
headings.

Fixes: 209b44c8 ("docs: powerpc: syscall64-abi.rst: fix a malformed table")
Signed-off-by: NAndrew Donnellan <ajd@linux.ibm.com>
Link: https://lore.kernel.org/r/20210225060857.16083-1-ajd@linux.ibm.comSigned-off-by: NJonathan Corbet <corbet@lwn.net>

Run the update script to document the recent feature additions
on riscv, mips and csky.

Fixes: c109f424 ("csky: Add kmemleak support")
Fixes: 8b3165e5 ("MIPS: Enable GCOV")
Fixes: 1ddc96bd ("MIPS: kernel: Support extracting off-line stack traces from user-space with perf")
Fixes: 74784081 ("riscv: Add uprobes supported")
Fixes: 829adda5 ("riscv: Add KPROBES_ON_FTRACE supported")
Fixes: c22b0bcb ("riscv: Add kprobes supported")
Fixes: dcdc7a53 ("RISC-V: Implement ptrace regs and stack API")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210225142841.3385428-2-arnd@kernel.orgSigned-off-by: NJonathan Corbet <corbet@lwn.net>

The references to arch/c6x are obsolete now that the architecture
is gone. Remove them.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210225142841.3385428-1-arnd@kernel.orgSigned-off-by: NJonathan Corbet <corbet@lwn.net>

I went to go add a new RECLAIM_* mode for the zone_reclaim_mode sysctl.
Like a good kernel developer, I also went to go update the
documentation.  I noticed that the bits in the documentation didn't
match the bits in the #defines.

The VM never explicitly checks the RECLAIM_ZONE bit.  The bit is,
however implicitly checked when checking 'node_reclaim_mode==0'.  The
RECLAIM_ZONE #define was removed in a cleanup.  That, by itself is fine.

But, when the bit was removed (bit 0) the _other_ bit locations also got
changed.  That's not OK because the bit values are documented to mean
one specific thing.  Users surely do not expect the meaning to change
from kernel to kernel.

The end result is that if someone had a script that did:

	sysctl vm.zone_reclaim_mode=1

it would have gone from enabling node reclaim for clean unmapped pages
to writing out pages during node reclaim after the commit in question.
That's not great.

Put the bits back the way they were and add a comment so something like
this is a bit harder to do again.  Update the documentation to make it
clear that the first bit is ignored.

Link: https://lkml.kernel.org/r/20210219172555.FF0CDF23@viggo.jf.intel.comSigned-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Fixes: 648b5cf3 ("mm/vmscan: remove unused RECLAIM_OFF/RECLAIM_ZONE")
Reviewed-by: NBen Widawsky <ben.widawsky@intel.com>
Reviewed-by: NOscar Salvador <osalvador@suse.de>
Acked-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NChristoph Lameter <cl@linux.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Daniel Wagner <dwagner@suse.de>
Cc: "Tobin C. Harding" <tobin@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Qian Cai <cai@lca.pw>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The generated html will link to the definition of the gfp_t automatically
once we define it.  Move the one-paragraph overview of GFP flags from the
documentation directory into gfp.h and pull gfp.h into the documentation.

This generates warnings with clang
(https://lkml.kernel.org/r/20210219195509.GA59987@24bbad8f3778), so
use a #if 0 to hide it from the compiler for now.

Link: https://lkml.kernel.org/r/20210215204909.3824509-1-willy@infradead.org
Link: https://lkml.kernel.org/r/20210220003049.GZ2858050@casper.infradead.orgSigned-off-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Acked-by: NMike Rapoport <rppt@linux.ibm.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rename CONFIG_TEST_KASAN_MODULE to CONFIG_KASAN_MODULE_TEST.

This naming is more consistent with the existing CONFIG_KASAN_KUNIT_TEST.

Link: https://linux-review.googlesource.com/id/Id347dfa5fe8788b7a1a189863e039f409da0ae5f
Link: https://lkml.kernel.org/r/f08250246683981bcf8a094fbba7c361995624d2.1610733117.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NMarco Elver <elver@google.com>
Reviewed-by: NAlexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Mention in the documentation that enabling CONFIG_KASAN_HW_TAGS always
results in in-kernel TBI (Top Byte Ignore) being enabled.

Also do a few minor documentation cleanups.

Link: https://linux-review.googlesource.com/id/Iba2a6697e3c6304cb53f89ec61dedc77fa29e3ae
Link: https://lkml.kernel.org/r/3b4ea6875bb14d312092ad14ac55cb456c83c08e.1610733117.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NMarco Elver <elver@google.com>
Reviewed-by: NAlexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Peter Collingbourne <pcc@google.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This patch adds swapcache stat for the cgroup v2.  The swapcache
represents the memory that is accounted against both the memory and the
swap limit of the cgroup.  The main motivation behind exposing the
swapcache stat is for enabling users to gracefully migrate from cgroup
v1's memsw counter to cgroup v2's memory and swap counters.

Cgroup v1's memsw limit allows users to limit the memory+swap usage of a
workload but without control on the exact proportion of memory and swap.
Cgroup v2 provides separate limits for memory and swap which enables more
control on the exact usage of memory and swap individually for the
workload.

With some little subtleties, the v1's memsw limit can be switched with the
sum of the v2's memory and swap limits.  However the alternative for memsw
usage is not yet available in cgroup v2.  Exposing per-cgroup swapcache
stat enables that alternative.  Adding the memory usage and swap usage and
subtracting the swapcache will approximate the memsw usage.  This will
help in the transparent migration of the workloads depending on memsw
usage and limit to v2' memory and swap counters.

The reasons these applications are still interested in this approximate
memsw usage are: (1) these applications are not really interested in two
separate memory and swap usage metrics.  A single usage metric is more
simple to use and reason about for them.

(2) The memsw usage metric hides the underlying system's swap setup from
the applications.  Applications with multiple instances running in a
datacenter with heterogeneous systems (some have swap and some don't) will
keep seeing a consistent view of their usage.

[akpm@linux-foundation.org: fix CONFIG_SWAP=n build]

Link: https://lkml.kernel.org/r/20210108155813.2914586-3-shakeelb@google.comSigned-off-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NRoman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Muchun Song <songmuchun@bytedance.com>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "mm/debug_vm_pgtable: Some minor updates", v3.

This series contains some cleanups and new test suggestions from Catalin
from an earlier discussion.

https://lore.kernel.org/linux-mm/20201123142237.GF17833@gaia/

This patch (of 2):

This adds validation tests for dirtiness after write protect conversion
for each page table level.  There are two new separate test types involved
here.

The first test ensures that a given page table entry does not become dirty
after pxx_wrprotect().  This is important for platforms like arm64 which
transfers and drops the hardware dirty bit (!PTE_RDONLY) to the software
dirty bit while making it an write protected one.  This test ensures that
no fresh page table entry could be created with hardware dirty bit set.
The second test ensures that a given page table entry always preserve the
dirty information across pxx_wrprotect().

This adds two previously missing PUD level basic tests and while here
fixes pxx_wrprotect() related typos in the documentation file.

Link: https://lkml.kernel.org/r/1611137241-26220-1-git-send-email-anshuman.khandual@arm.com
Link: https://lkml.kernel.org/r/1611137241-26220-2-git-send-email-anshuman.khandual@arm.comSigned-off-by: NAnshuman Khandual <anshuman.khandual@arm.com>
Suggested-by: NCatalin Marinas <catalin.marinas@arm.com>
Tested-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Gerald Schaefer <gerald.schaefer@linux.ibm.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Steven Price <steven.price@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The boot param and config determine the value of memcg_sysfs_enabled,
which is unused since commit 10befea9 ("mm: memcg/slab: use a single
set of kmem_caches for all allocations") as there are no per-memcg kmem
caches anymore.

Link: https://lkml.kernel.org/r/20210127124745.7928-1-vbabka@suse.czSigned-off-by: NVlastimil Babka <vbabka@suse.cz>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Reviewed-by: NMiaohe Lin <linmiaohe@huawei.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

On SM8250 additional clock is required for PCIe devices to access NOC.
Document this requirement in devicetree bindings.

Link: https://lore.kernel.org/r/20210117013114.441973-2-dmitry.baryshkov@linaro.org
Fixes: 45816824 ("dt-bindings: pci: qcom: Document PCIe bindings for SM8250 SoC")
Signed-off-by: NDmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

In commit 9669f51d I tried to get rid of the undocumented cow gc
lifetime knob.  The knob's function was never documented and it now
doesn't really have a function since eof and cow gc have been
consolidated.

Regrettably, xfs/231 relies on it and regresses on for-next.  I did not
succeed at getting far enough through fstests patch review for the fixup
to land in time.

Restore the sysctl knob, document what it did (does?), put it on the
deprecation schedule, and rip out a redundant function.

Fixes: 9669f51d ("xfs: consolidate the eofblocks and cowblocks workers")
Signed-off-by: NDarrick J. Wong <djwong@kernel.org>
Reviewed-by: NDave Chinner <dchinner@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>

Add PCIe Endpoint mode compatible string "fsl,lx2160ar2-pcie-ep"

Link: https://lore.kernel.org/r/20201026051448.1913-1-Zhiqiang.Hou@nxp.comSigned-off-by: NHou Zhiqiang <Zhiqiang.Hou@nxp.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRob Herring <robh@kernel.org>

Some devices, including most Microsoft Surface devices, have a platform
profile somewhere inbetween balanced and performance. More specifically,
adding this profile allows the following mapping on Surface devices:

  Vendor Name           Platform Profile
  ------------------------------------------
  Battery Saver         low-power
  Recommended           balanced
  Better Performance    balanced-performance
  Best Performance      performance
Suggested-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NMaximilian Luz <luzmaximilian@gmail.com>
Reviewed-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

For some reason, unevaluatedProperties doesn't work and
additionalProperties is required. Fix it by switching to
additionalProperties.
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210218152837.1080819-1-maxime@cerno.techSigned-off-by: NRob Herring <robh@kernel.org>

The NanoPi M4B is a minor revision of the original M4.

The differences against the original Nanopi M4 that are common with the
other M4V2 revision include:

  - microphone header removed
  - power button added
  - recovery button added

Additional changes specific to the M4B:

  - USB 3.0 hub removed; board now has 2x USB 3.0 type-A ports and 2x
    USB 2.0 ports
  - ADB toggle switch added; this changes the top USB 3.0 host port to
    a peripheral port
  - Type-C port no longer supports data or PD
  - WiFi/Bluetooth combo chip switched to AP6256, which supports BT 5.0
    but only 1T1R (down from 2T2R) for WiFi

Add a compatible string for the new board revision.

Link: https://lore.kernel.org/r/20210121162321.4538-3-wens@kernel.orgSigned-off-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NRob Herring <robh@kernel.org>

Add documentation to help users use pci-epf-ntb function driver and
existing host side NTB infrastructure for NTB functionality.

[bhelgaas: fix a few typos]
Link: https://lore.kernel.org/r/20210201195809.7342-18-kishon@ti.comSigned-off-by: NKishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NRandy Dunlap <rdunlap@infradead.org>