When run igt@kms_vrr in a device that uses DCN2.1 architecture, we
noticed multiple failures. Furthermore, when we tested a VRR demo, we
noticed a system hang where the mouse pointer still works, but the
entire system freezes; in this case, we don't see any dmesg warning or
failure messages kernel. This happens due to a lack of vupdate_no_lock
interrupt, making the userspace wait eternally to get the event back.
For fixing this issue, we need to add the vupdate_no_lock interrupt in
the interrupt list.
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Acked-by: NBindu Ramamurthy <bindu.r@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes: 62914a99 ("drm/amdgpu: Use mmu_interval_insert instead of hmm_mirror")
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If init_cwsr_apu fails, we currently leave the kfd_process structure in
place anyway. The next kfd_open will then succeed, using the existing
kfd_process structure. Fix that by cleaning up the kfd_process after a
failure in init_cwsr_apu.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NPhilip Yang <philip.yang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We use mmu_notifier_put to free the MMU notifier. That needs to be
paired with mmu_notifier_get to work correctly. Othewrise the next patch
would cause a kernel oops.
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NPhilip Yang <philip.yang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 8866a67a.

Reason for revert: This breaks hotplug of HDMI on some systems,
resulting in a blank screen. Caused general hangs on boot/hotplugs.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1487
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1492
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=211649Signed-off-by: NAnson Jacob <Anson.Jacob@amd.com>
Reviewed-by: NBhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix the following coccicheck warning:
./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:8142:16-21: WARNING:
conversion to bool not needed here
Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NYang Li <yang.lee@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We should commit the value after restore them back to default as well.

$ echo "r" > pp_od_clk_voltage
$ echo "c" > pp_od_clk_voltage
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

New proposed sequence for HUBP blanking causes regressions where the
hardware would fail to enter blank which triggers an assert in the new
sequence. This change brings back the old sequence.

Fixes: 985faf2c ("drm/amd/display: New sequence for HUBP blank")
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NBhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Mark amdgpu_ras_debugfs_create_ctrl_node() as static.

Fixes: eb14235668777b ("drm/amdgpu: do not keep debugfs dentry")
Reported-by: Nkernel test robot <lkp@intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DC version 3.2.123 brings improvements in multiple areas.
In summary, we highlight:

- Firmware release 0.0.52
- Bug fixes on MPC OGAM sequence, display experience, etc.
- Improvements on timing, transmitter control, etc.
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NQingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[How]
Add new aux cmd fields for acquire and release
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NQingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Moving definition of transmitter control from atomfirmware
to internal header.

[How]
Update the command table code to call 1.7 and make it the
default fallback path.
Signed-off-by: NEric Bernstein <eric.bernstein@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NQingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Simplify AVMUTE logic in coding

[How]
Avoid multiple calls on TMDS AVMUTE
as updated logic now demands it.
Signed-off-by: NChris Park <Chris.Park@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NQingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
With certain fclock overclocks, state 1 may be chosen
as the closest clock level. This may result in this state
being empty if not populated beforehand, resulting in
black screens and screen corruption.

[How]
Copy over all soc states to clock_limits before bounding
box creation to avoid any cases with empty states.
Signed-off-by: NSung Lee <sung.lee@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NQingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Add necessary support for Freesync HDMI in Linux DM

[How]
- Support Freesync HDMI by calling DC interace
- Report Freesync capability to vrr_range debugfs from DRM
- Depends on coming DMCU/DMUB firmware to enable feature
Signed-off-by: NStylon Wang <stylon.wang@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NQingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
If system is overclocked, only 1 bounding box state will
be sent by SMU. This results in an empty state being copied
for DML calculations causing black screens and corruption.

[How]
Fully populate bounding box before duplicating last state.
Signed-off-by: NSung Lee <sung.lee@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NQingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Color corruption can occur on bootup into a login
manager that applies a non-linear gamma LUT because
the LUT may not actually be powered on before writing.

It's cleared on the next full pipe reprogramming as
we switch to LUTB from LUTA and the pipe accessing
the LUT has taken it out of light sleep mode.

[How]
The MPCC_OGAM_MEM_PWR_FORCE register does not force
the current power mode when set to 0. It only forces
when set light sleep, deep sleep or shutdown.

The register to actually force power on and ignore
sleep modes is MPCC_OGAM_MEM_PWR_DIS - a value of 0
will enable power requests and a value of 1 will
disable them.

When PWR_FORCE!=0 is combined with PWR_DIS=0 then
MPCC OGAM memory is forced into the state specified
by the force bits.

If PWR_FORCE is 0 then it respects the mode specified
by MPCC_OGAM_MEM_LOW_PWR_MODE if the RAM LUT is not
in use.

We set that bit to shutdown on low power, but otherwise
it inherits from bootup defaults.

So for the fix:

1. Update the sequence to "force" power on when needed

We can use MPCC_OGAM_MEM_PWR_DIS for this to turn on the
memory even when the block is in bypass and pending to be
enabled for the next frame.

We need this for both low power enabled or disabled.

If we don't set this then we can run into issues when we
first program the LUT from bootup.

2. Don't apply FORCE_SEL

Once we enable power requests with DIS=0 we run into the
issue of the RAM being forced into light sleep and being
unusable for display output. Leave this 0 like we used to
for DCN20.

3. Rely on MPCC OGAM init to determine light sleep/deep sleep

MPC low power debug mode isn't enabled on any ASIC currently
but we'll respect the setting determined during init if it
is.

Lightly tested as working with IGT tests and desktop color
adjustment.

4. Change the MPC resource default for DCN30

It was interleaving the dcn20 and dcn30 versions before
depending on the sequence.

5. REG_WAIT for it to be on whenever we're powering up the
memory

Otherwise we can write register values too early and we'll
get corruption.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NQingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We added these in DMCUB for runtime feature detection
but we didn't have helpers to call these with DC error
handling/logging.

[How]
Add helpers.
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NQingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Hardware team remeasured, need to update timings
to increase latency slightly and avoid intermittent
underflows.

[How]
sr exit latency update.
Signed-off-by: NMartin Leung <martin.leung@amd.com>
Reviewed-by: NAlvin Lee <Alvin.Lee2@amd.com>
Acked-by: NQingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit fd1c85d3

[Why]
We are not implementing the planned new HW sequence
to disable HUBP.

[How]
Revert most related changes to minimize possibility
of regression.
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: NMartin Leung <Martin.Leung@amd.com>
Acked-by: NQingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit f8e792dc

[Why]
We are not implementing the planned new HW
sequence for HUBP disable.

[How]
Revert most related changes to minimize regressions.
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: NMartin Leung <Martin.Leung@amd.com>
Acked-by: NQingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
In following sequence driver will add counter twice on
same edp stream.
1. Boot into OS.
2. Set timing with edp only.
3. Set timing with edp and external monitor.
4. Set visibility on for edp.

Step 2 and 3 will add seamless boot counter twice and
subtract it once in step 4.

[How]
Remove global counter and calculate it is used.
Signed-off-by: NLewis Huang <Lewis.Huang@amd.com>
Reviewed-by: NMartin Leung <Martin.Leung@amd.com>
Acked-by: NQingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
To get the pixel statistics on every frame, change ABM
sample rate from 2 to 1.

[How]
Change LS, HS and BL sample rate to 1.
Signed-off-by: NPo-Ting Chen <robin.chen@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NQingqing Zhuo <Qingqing.Zhuo@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use debugfs API directly instead of drm middle layer.

v2: squash in build fix (Alex)
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Retrieving radeon device struct from ring struct will be
used in next patch where debugfs's show function can only pass
one private data pointer.
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove the 'radeon_packet3_check_t' typedef as it is not used.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NChen Lin <chen.lin5@zte.com.cn>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drm/radeon/nislands_smc.h: Replace one-element array with flexible-array member in struct NISLANDS_SMC_SWSTATE

There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].

Use flexible-array member in struct NISLANDS_SMC_SWSTATE, instead of
one-element array.

Also, this helps with the ongoing efforts to enable -Warray-bounds by
fixing the following warnings:

drivers/gpu/drm/radeon/ni_dpm.c: In function ‘ni_convert_power_state_to_smc’:
drivers/gpu/drm/radeon/ni_dpm.c:2521:20: warning: array subscript 1 is above array bounds of ‘NISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’ {aka ‘struct NISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds]
 2521 |   smc_state->levels[i].dpm2.MaxPS =
      |   ~~~~~~~~~~~~~~~~~^~~
drivers/gpu/drm/radeon/ni_dpm.c:2523:20: warning: array subscript 1 is above array bounds of ‘NISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’ {aka ‘struct NISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds]
 2523 |   smc_state->levels[i].dpm2.NearTDPDec = NISLANDS_DPM2_NEAR_TDP_DEC;
      |   ~~~~~~~~~~~~~~~~~^~~
drivers/gpu/drm/radeon/ni_dpm.c:2524:20: warning: array subscript 1 is above array bounds of ‘NISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’ {aka ‘struct NISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds]
 2524 |   smc_state->levels[i].dpm2.AboveSafeInc = NISLANDS_DPM2_ABOVE_SAFE_INC;
      |   ~~~~~~~~~~~~~~~~~^~~
drivers/gpu/drm/radeon/ni_dpm.c:2525:20: warning: array subscript 1 is above array bounds of ‘NISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’ {aka ‘struct NISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds]
 2525 |   smc_state->levels[i].dpm2.BelowSafeInc = NISLANDS_DPM2_BELOW_SAFE_INC;
      |   ~~~~~~~~~~~~~~~~~^~~
drivers/gpu/drm/radeon/ni_dpm.c:2526:35: warning: array subscript 1 is above array bounds of ‘NISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’ {aka ‘struct NISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds]
 2526 |   smc_state->levels[i].stateFlags |=
      |                                   ^~
drivers/gpu/drm/radeon/ni_dpm.c:2526:35: warning: array subscript 1 is above array bounds of ‘NISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’ {aka ‘struct NISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds]
 2526 |   smc_state->levels[i].stateFlags |=
      |   ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~
 2527 |    ((i != (state->performance_level_count - 1)) && power_boost_limit) ?
      |    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 2528 |    PPSMC_STATEFLAG_POWERBOOST : 0;
      |    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/radeon/ni_dpm.c:2442:20: warning: array subscript 1 is above array bounds of ‘NISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’ {aka ‘struct NISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds]
 2442 |   smc_state->levels[i + 1].aT = cpu_to_be32(a_t);

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109Build-tested-by: Nkernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/6023ed54.BfIY+9Uz81I6nq19%25lkp@intel.com/Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

drm/amd/pm: Replace one-element array with flexible-array in struct _ATOM_Vega10_GFXCLK_Dependency_Table

There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].

Use flexible-array member in struct _ATOM_Vega10_GFXCLK_Dependency_Table,
instead of one-element array.

Also, this helps with the ongoing efforts to enable -Warray-bounds and
fix the following warning:

drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_hwmgr.c: In function ‘vega10_get_pp_table_entry_callback_func’:
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/vega10_hwmgr.c:3113:30: warning: array subscript 4 is above array bounds of ‘ATOM_Vega10_GFXCLK_Dependency_Record[1]’ {aka ‘struct _ATOM_Vega10_GFXCLK_Dependency_Record[1]’} [-Warray-bounds]
 3113 |     gfxclk_dep_table->entries[4].ulClk;
      |     ~~~~~~~~~~~~~~~~~~~~~~~~~^~~

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109Build-tested-by: Nkernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/6023ff3d.WY3sSCkGRQPdPlVo%25lkp@intel.com/Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].

Refactor the code according to the use of a flexible-array member in
struct SISLANDS_SMC_SWSTATE, instead of a one-element array, and use
the struct_size() helper to calculate the size for the allocation.

Also, this helps with the ongoing efforts to enable -Warray-bounds and
fix the following warnings:

drivers/gpu/drm/amd/amdgpu/../pm/powerplay/si_dpm.c:2448:20: warning: array
subscript 1 is above array bounds of ‘SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’
{aka ‘struct SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds]
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/si_dpm.c:2449:20: warning: array
subscript 1 is above array bounds of ‘SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’
{aka ‘struct SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds]
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/si_dpm.c:2450:20: warning: array
subscript 1 is above array bounds of ‘SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’
{aka ‘struct SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds]
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/si_dpm.c:2451:20: warning: array
subscript 1 is above array bounds of ‘SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’
{aka ‘struct SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds]
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/si_dpm.c:2452:20: warning: array
subscript 1 is above array bounds of ‘SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’
{aka ‘struct SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds]
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/si_dpm.c:5570:20: warning: array
subscript 1 is above array bounds of ‘SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’
{aka ‘struct SISLANDS_SMC_HW_PERFORMANCE_LEVEL[1]’} [-Warray-bounds]

[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays

Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109Build-tested-by: Nkernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/6023be58.sk66L%2FV4vuSJI5mI%25lkp@intel.com/Signed-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There are spelling mistakes in error and warning messages, the text
power_dpm_force_perfomance_level is missing a letter r and should be
power_dpm_force_performance_level.  Fix them.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use debugfs API directly instead of drm middle layer.

This also includes following debugfs file output changes:
1 amdgpu_evict_vram/amdgpu_evict_gtt output will not contain any braces.
  e.g. (0) --> 0
2 amdgpu_gpu_recover output will print return value of
  amdgpu_device_gpu_recover() instead of not so important "gpu recover"
  message.

v2: * checkpatch.pl: use '0444' instead of S_IRUGO.
    * remove S_IFREG from mode.
    * remove mode variable.
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use debugfs API directly instead of drm middle layer.

v2: * checkpatch.pl: use '0444' instead of S_IRUGO.
    * remove S_IFREG from mode.
    * remove mode variable.
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use debugfs API directly instead of drm middle layer.

v2: * checkpatch.pl: use '0444' instead of S_IRUGO.
    * remove S_IFREG from mode.
    * remove mode variable.
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Removed unused CONFIG_DRM_AMDGPU_GART_DEBUGFS code.
We can use umr instead of this gart debugfs.
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove unnecessary debugfs dentries and also radeon_ttm_debugfs_fini()
as drm_debugfs_cleanup() will recursively remove debugfs files.
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Cleanup unnecessary debugfs dentries and surrounding functions.

v3: remove return value check for debugfs_create_file()
v2: remove ttm_debugfs_entries array.
    do not init variables.
Signed-off-by: NNirmoy Das <nirmoy.das@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fixes the rlc reference clock used for GPU timestamps.
Value is 100Mhz.  Confirmed with hardware team.

v2: reword commit message.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1480Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Disable it on those boards.  No functional change, this just
removes the message about VCE failing to initialize.

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=197327Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

memalloc_nofs_save/restore are no longer sufficient to prevent recursive
lock warnings when holding locks that can be taken in MMU notifiers. Use
memalloc_noreclaim_save/restore instead.

Fixes: f920e413 ("mm: track mmu notifiers in fs_reclaim_acquire/release")
CC: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NPhilip Yang <Philip.Yang@amd.com>
Signed-off-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 5.10.x

dcn21_validate_bandwidth() calls functions that use floating point math.
On my machine this sometimes results in simd exceptions when there are
other FPU users such as KVM virtual machines running. The screen freezes
completely in this case.

Wrapping the function with DC_FP_START()/DC_FP_END() seems to solve the
problem. This mirrors the approach used for dcn20_validate_bandwidth.

Tested on a AMD Ryzen 7 PRO 4750U (Renoir).

Bug: https://bugzilla.kernel.org/show_bug.cgi?id=206987Signed-off-by: NJan Kokemüller <jan.kokemueller@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org