提交 · 3bdb259116059a6b805cfe9be66f4054f92598a3 · openeuler / Kernel

24 3月, 2014 20 次提交
- D
  iommu/vt-d: Make iommu_should_identity_map() take struct device · 3bdb2591
  由 David Woodhouse 提交于 3月 09, 2014
```
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  3bdb2591
- D
  iommu/vt-d: Handle RMRRs for non-PCI devices · 0b9d9753
  由 David Woodhouse 提交于 3月 09, 2014
```
Should hopefully never happen (RMRRs are an abomination) but while we're
busy eliminating all the PCI assumptions, we might as well do it.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  0b9d9753
- D
  iommu/vt-d: Make get_domain_for_dev() take struct device · 146922ec
  由 David Woodhouse 提交于 3月 09, 2014
```
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  146922ec
- D
  iommu/vt-d: Make domain_context_mapp{ed,ing}() take struct device · e1f167f3
  由 David Woodhouse 提交于 3月 09, 2014
```
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  e1f167f3
- D
  iommu/vt-d: Make device_to_iommu() cope with non-PCI devices · 156baca8
  由 David Woodhouse 提交于 3月 09, 2014
```
Pass the struct device to it, and also make it return the bus/devfn to use,
since that is also stored in the DMAR table.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  156baca8
- D
  iommu/vt-d: Make identity_mapping() take struct device not struct pci_dev · 9b226624
  由 David Woodhouse 提交于 3月 09, 2014
```
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  9b226624
- D
  iommu/vt-d: Remove segment from struct device_domain_info() · 41e80dca
  由 David Woodhouse 提交于 3月 09, 2014
```
It's accessible via info->iommu->segment so this is redundant.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  41e80dca
- D
  iommu/vt-d: Store PCI segment number in struct intel_iommu · 67ccac41
  由 David Woodhouse 提交于 3月 09, 2014
```
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  67ccac41
- D
  iommu/vt-d: Remove device_to_iommu() call from domain_remove_dev_info() · 7c7faa11
  由 David Woodhouse 提交于 3月 09, 2014
```
This was problematic because it works by domain/bus/devfn and we want
to make device_to_iommu() use only a struct device * (for handling non-PCI
devices). Now that the iommu pointer is reliably stored in the
device_domain_info, we don't need to look it up.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  7c7faa11
- D
  iommu/vt-d: Simplify iommu check in domain_remove_one_dev_info() · 8bbc4410
  由 David Woodhouse 提交于 3月 09, 2014
```
Now we store the iommu in the device_domain_info, we don't need to do a
lookup.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  8bbc4410
- D
  iommu/vt-d: Always store iommu in device_domain_info · 5a8f40e8
  由 David Woodhouse 提交于 3月 09, 2014
```
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  5a8f40e8
- D
  iommu/vt-d: Use domain_remove_one_dev_info() in domain_add_dev_info() error path · e2f8c5f6
  由 David Woodhouse 提交于 3月 09, 2014
```
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  e2f8c5f6
- D
  iommu/vt-d: use dmar_insert_dev_info() from dma_add_dev_info() · 0ac72664
  由 David Woodhouse 提交于 3月 09, 2014
```
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  0ac72664
- D
  iommu/vt-d: Stop dmar_insert_dev_info() freeing domains on losing race · b718cd3d
  由 David Woodhouse 提交于 3月 09, 2014
```
By moving this into get_domain_for_dev() we can make dmar_insert_dev_info()
suitable for use with "special" domains such as the si_domain, which
currently use domain_add_dev_info().
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  b718cd3d
- D
  iommu/vt-d: Pass iommu to domain_context_mapping_one() and iommu_support_dev_iotlb() · 64ae892b
  由 David Woodhouse 提交于 3月 09, 2014
```
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  64ae892b
- D
  iommu/vt-d: Use struct device in device_domain_info, not struct pci_dev · 0bcb3e28
  由 David Woodhouse 提交于 3月 06, 2014
```
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  0bcb3e28
- D
  iommu/vt-d: Make dmar_insert_dev_info() take struct device instead of struct pci_dev · 1525a29a
  由 David Woodhouse 提交于 3月 06, 2014
```
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  1525a29a
- D
  iommu/vt-d: Make iommu_dummy() take struct device instead of struct pci_dev · 3d89194a
  由 David Woodhouse 提交于 3月 06, 2014
```
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  3d89194a
- D
  iommu/vt-d: Add ACPI devices into dmaru->devices[] array · ed40356b
  由 David Woodhouse 提交于 3月 07, 2014
```
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  ed40356b
- D
  iommu/vt-d: Change scope lists to struct device, bus, devfn · 832bd858
  由 David Woodhouse 提交于 3月 07, 2014
```
It's not only for PCI devices any more, and the scope information for an
ACPI device provides the bus and devfn so that has to be stored here too.

It is the device pointer itself which needs to be protected with RCU,
so the __rcu annotation follows it into the definition of struct
dmar_dev_scope, since we're no longer just passing arrays of device
pointers around.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
  832bd858
20 3月, 2014 7 次提交

D
iommu/vt-d: Allocate space for ACPI devices · 07cb52ff
由 David Woodhouse 提交于 3月 07, 2014
```
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
07cb52ff
D
iommu/vt-d: Parse ANDD records · e625b4a9
由 David Woodhouse 提交于 3月 07, 2014
```
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
e625b4a9
D
iommu/vt-d: Add ACPI namespace device reporting structures · 86a54dcc
由 David Woodhouse 提交于 3月 07, 2014
```
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
86a54dcc

iommu/vt-d: Be less pessimistic about domain coherency where possible · d0501960

由 David Woodhouse 提交于 3月 11, 2014

In commit 2e12bc29 ("intel-iommu: Default to non-coherent for domains
unattached to iommus") we decided to err on the side of caution and
always assume that it's possible that a device will be attached which is
behind a non-coherent IOMMU.

In some cases, however, that just *cannot* happen. If there *are* no
IOMMUs in the system which are non-coherent, then we don't need to do
it. And flushing the dcache is a *significant* performance hit.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

d0501960

D
iommu/vt-d: Honour intel_iommu=sp_off for non-VMM domains · 214e39aa
由 David Woodhouse 提交于 3月 19, 2014
```
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
```
214e39aa

iommu/vt-d: Clean up and fix page table clear/free behaviour · ea8ea460

由 David Woodhouse 提交于 3月 05, 2014

There is a race condition between the existing clear/free code and the
hardware. The IOMMU is actually permitted to cache the intermediate
levels of the page tables, and doesn't need to walk the table from the
very top of the PGD each time. So the existing back-to-back calls to
dma_pte_clear_range() and dma_pte_free_pagetable() can lead to a
use-after-free where the IOMMU reads from a freed page table.

When freeing page tables we actually need to do the IOTLB flush, with
the 'invalidation hint' bit clear to indicate that it's not just a
leaf-node flush, after unlinking each page table page from the next level
up but before actually freeing it.

So in the rewritten domain_unmap() we just return a list of pages (using
pg->freelist to make a list of them), and then the caller is expected to
do the appropriate IOTLB flush (or tear down the domain completely,
whatever), before finally calling dma_free_pagelist() to free the pages.

As an added bonus, we no longer need to flush the CPU's data cache for
pages which are about to be *removed* from the page table hierarchy anyway,
in the non-cache-coherent case. This drastically improves the performance
of large unmaps.

As a side-effect of all these changes, this also fixes the fact that
intel_iommu_unmap() was neglecting to free the page tables for the range
in question after clearing them.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

ea8ea460

iommu/vt-d: Clean up size handling for intel_iommu_unmap() · 5cf0a76f

由 David Woodhouse 提交于 3月 19, 2014

We have this horrid API where iommu_unmap() can unmap more than it's asked
to, if the IOVA in question happens to be mapped with a large page.

Instead of propagating this nonsense to the point where we end up returning
the page order from dma_pte_clear_range(), let's just do it once and adjust
the 'size' parameter accordingly.

Augment pfn_to_dma_pte() to return the level at which the PTE was found,
which will also be useful later if we end up changing the API for
iommu_iova_to_phys() to behave the same way as is being discussed upstream.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

5cf0a76f

05 3月, 2014 13 次提交

iommu/vt-d: Update IOMMU state when memory hotplug happens · 75f05569

由 Jiang Liu 提交于 2月 19, 2014

If static identity domain is created, IOMMU driver needs to update
si_domain page table when memory hotplug event happens. Otherwise
PCI device DMA operations can't access the hot-added memory regions.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NJoerg Roedel <joro@8bytes.org>

75f05569

iommu/vt-d: Unify the way to process DMAR device scope array · 2e455289

由 Jiang Liu 提交于 2月 19, 2014

Now we have a PCI bus notification based mechanism to update DMAR
device scope array, we could extend the mechanism to support boot
time initialization too, which will help to unify and simplify
the implementation.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NJoerg Roedel <joro@8bytes.org>

2e455289

iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens · 59ce0515

由 Jiang Liu 提交于 2月 19, 2014

Current Intel DMAR/IOMMU driver assumes that all PCI devices associated
with DMAR/RMRR/ATSR device scope arrays are created at boot time and
won't change at runtime, so it caches pointers of associated PCI device
object. That assumption may be wrong now due to:
1) introduction of PCI host bridge hotplug
2) PCI device hotplug through sysfs interfaces.

Wang Yijing has tried to solve this issue by caching <bus, dev, func>
tupple instead of the PCI device object pointer, but that's still
unreliable because PCI bus number may change in case of hotplug.
Please refer to http://lkml.org/lkml/2013/11/5/64
Message from Yingjing's mail:
after remove and rescan a pci device
[  611.857095] dmar: DRHD: handling fault status reg 2
[  611.857109] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff7000
[  611.857109] DMAR:[fault reason 02] Present bit in context entry is clear
[  611.857524] dmar: DRHD: handling fault status reg 102
[  611.857534] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff6000
[  611.857534] DMAR:[fault reason 02] Present bit in context entry is clear
[  611.857936] dmar: DRHD: handling fault status reg 202
[  611.857947] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff5000
[  611.857947] DMAR:[fault reason 02] Present bit in context entry is clear
[  611.858351] dmar: DRHD: handling fault status reg 302
[  611.858362] dmar: DMAR:[DMA Read] Request device [86:00.3] fault addr ffff4000
[  611.858362] DMAR:[fault reason 02] Present bit in context entry is clear
[  611.860819] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[  611.860983] dmar: DRHD: handling fault status reg 402
[  611.860995] dmar: INTR-REMAP: Request device [[86:00.3] fault index a4
[  611.860995] INTR-REMAP:[fault reason 34] Present field in the IRTE entry is clear

This patch introduces a new mechanism to update the DRHD/RMRR/ATSR device scope
caches by hooking PCI bus notification.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NJoerg Roedel <joro@8bytes.org>

59ce0515

iommu/vt-d: Use RCU to protect global resources in interrupt context · 0e242612

由 Jiang Liu 提交于 2月 19, 2014

Global DMA and interrupt remapping resources may be accessed in
interrupt context, so use RCU instead of rwsem to protect them
in such cases.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NJoerg Roedel <joro@8bytes.org>

0e242612

iommu/vt-d: Introduce a rwsem to protect global data structures · 3a5670e8

由 Jiang Liu 提交于 2月 19, 2014

Introduce a global rwsem dmar_global_lock, which will be used to
protect DMAR related global data structures from DMAR/PCI/memory
device hotplug operations in process context.

DMA and interrupt remapping related data structures are read most,
and only change when memory/PCI/DMAR hotplug event happens.
So a global rwsem solution is adopted for balance between simplicity
and performance.

For interrupt remapping driver, function intel_irq_remapping_supported(),
dmar_table_init(), intel_enable_irq_remapping(), disable_irq_remapping(),
reenable_irq_remapping() and enable_drhd_fault_handling() etc
are called during booting, suspending and resuming with interrupt
disabled, so no need to take the global lock.

For interrupt remapping entry allocation, the locking model is:
	down_read(&dmar_global_lock);
	/* Find corresponding iommu */
	iommu = map_hpet_to_ir(id);
	if (iommu)
		/*
		 * Allocate remapping entry and mark entry busy,
		 * the IOMMU won't be hot-removed until the
		 * allocated entry has been released.
		 */
		index = alloc_irte(iommu, irq, 1);
	up_read(&dmar_global_lock);

For DMA remmaping driver, we only uses the dmar_global_lock rwsem to
protect functions which are only called in process context. For any
function which may be called in interrupt context, we will use RCU
to protect them in following patches.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NJoerg Roedel <joro@8bytes.org>

3a5670e8

iommu/vt-d: Introduce macro for_each_dev_scope() to walk device scope entries · b683b230

由 Jiang Liu 提交于 2月 19, 2014

Introduce for_each_dev_scope()/for_each_active_dev_scope() to walk
{active} device scope entries. This will help following RCU lock
related patches.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NJoerg Roedel <joro@8bytes.org>

b683b230

iommu/vt-d: Fix error in detect ATS capability · b5f82ddf

由 Jiang Liu 提交于 2月 19, 2014

Current Intel IOMMU driver only matches a PCIe root port with the first
DRHD unit with the samge segment number. It will report false result
if there are multiple DRHD units with the same segment number, thus fail
to detect ATS capability for some PCIe devices.

This patch refines function dmar_find_matched_atsr_unit() to search all
DRHD units with the same segment number.

An example DMAR table entries as below:
[1D0h 0464  2]                Subtable Type : 0002 <Root Port ATS Capability>
[1D2h 0466  2]                       Length : 0028
[1D4h 0468  1]                        Flags : 00
[1D5h 0469  1]                     Reserved : 00
[1D6h 0470  2]           PCI Segment Number : 0000

[1D8h 0472  1]      Device Scope Entry Type : 02
[1D9h 0473  1]                 Entry Length : 08
[1DAh 0474  2]                     Reserved : 0000
[1DCh 0476  1]               Enumeration ID : 00
[1DDh 0477  1]               PCI Bus Number : 00
[1DEh 0478  2]                     PCI Path : [02, 00]

[1E0h 0480  1]      Device Scope Entry Type : 02
[1E1h 0481  1]                 Entry Length : 08
[1E2h 0482  2]                     Reserved : 0000
[1E4h 0484  1]               Enumeration ID : 00
[1E5h 0485  1]               PCI Bus Number : 00
[1E6h 0486  2]                     PCI Path : [03, 00]

[1E8h 0488  1]      Device Scope Entry Type : 02
[1E9h 0489  1]                 Entry Length : 08
[1EAh 0490  2]                     Reserved : 0000
[1ECh 0492  1]               Enumeration ID : 00
[1EDh 0493  1]               PCI Bus Number : 00
[1EEh 0494  2]                     PCI Path : [03, 02]

[1F0h 0496  1]      Device Scope Entry Type : 02
[1F1h 0497  1]                 Entry Length : 08
[1F2h 0498  2]                     Reserved : 0000
[1F4h 0500  1]               Enumeration ID : 00
[1F5h 0501  1]               PCI Bus Number : 00
[1F6h 0502  2]                     PCI Path : [03, 03]

[1F8h 0504  2]                Subtable Type : 0002 <Root Port ATS Capability>
[1FAh 0506  2]                       Length : 0020
[1FCh 0508  1]                        Flags : 00
[1FDh 0509  1]                     Reserved : 00
[1FEh 0510  2]           PCI Segment Number : 0000

[200h 0512  1]      Device Scope Entry Type : 02
[201h 0513  1]                 Entry Length : 08
[202h 0514  2]                     Reserved : 0000
[204h 0516  1]               Enumeration ID : 00
[205h 0517  1]               PCI Bus Number : 40
[206h 0518  2]                     PCI Path : [02, 00]

[208h 0520  1]      Device Scope Entry Type : 02
[209h 0521  1]                 Entry Length : 08
[20Ah 0522  2]                     Reserved : 0000
[20Ch 0524  1]               Enumeration ID : 00
[20Dh 0525  1]               PCI Bus Number : 40
[20Eh 0526  2]                     PCI Path : [02, 02]

[210h 0528  1]      Device Scope Entry Type : 02
[211h 0529  1]                 Entry Length : 08
[212h 0530  2]                     Reserved : 0000
[214h 0532  1]               Enumeration ID : 00
[215h 0533  1]               PCI Bus Number : 40
[216h 0534  2]                     PCI Path : [03, 00]

[218h 0536  2]                Subtable Type : 0002 <Root Port ATS Capability>
[21Ah 0538  2]                       Length : 0020
[21Ch 0540  1]                        Flags : 00
[21Dh 0541  1]                     Reserved : 00
[21Eh 0542  2]           PCI Segment Number : 0000

[220h 0544  1]      Device Scope Entry Type : 02
[221h 0545  1]                 Entry Length : 08
[222h 0546  2]                     Reserved : 0000
[224h 0548  1]               Enumeration ID : 00
[225h 0549  1]               PCI Bus Number : 80
[226h 0550  2]                     PCI Path : [02, 00]

[228h 0552  1]      Device Scope Entry Type : 02
[229h 0553  1]                 Entry Length : 08
[22Ah 0554  2]                     Reserved : 0000
[22Ch 0556  1]               Enumeration ID : 00
[22Dh 0557  1]               PCI Bus Number : 80
[22Eh 0558  2]                     PCI Path : [02, 02]

[230h 0560  1]      Device Scope Entry Type : 02
[231h 0561  1]                 Entry Length : 08
[232h 0562  2]                     Reserved : 0000
[234h 0564  1]               Enumeration ID : 00
[235h 0565  1]               PCI Bus Number : 80
[236h 0566  2]                     PCI Path : [03, 00]

[238h 0568  2]                Subtable Type : 0002 <Root Port ATS Capability>
[23Ah 0570  2]                       Length : 0020
[23Ch 0572  1]                        Flags : 00
[23Dh 0573  1]                     Reserved : 00
[23Eh 0574  2]           PCI Segment Number : 0000

[240h 0576  1]      Device Scope Entry Type : 02
[241h 0577  1]                 Entry Length : 08
[242h 0578  2]                     Reserved : 0000
[244h 0580  1]               Enumeration ID : 00
[245h 0581  1]               PCI Bus Number : C0
[246h 0582  2]                     PCI Path : [02, 00]

[248h 0584  1]      Device Scope Entry Type : 02
[249h 0585  1]                 Entry Length : 08
[24Ah 0586  2]                     Reserved : 0000
[24Ch 0588  1]               Enumeration ID : 00
[24Dh 0589  1]               PCI Bus Number : C0
[24Eh 0590  2]                     PCI Path : [02, 02]

[250h 0592  1]      Device Scope Entry Type : 02
[251h 0593  1]                 Entry Length : 08
[252h 0594  2]                     Reserved : 0000
[254h 0596  1]               Enumeration ID : 00
[255h 0597  1]               PCI Bus Number : C0
[256h 0598  2]                     PCI Path : [03, 00]
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NJoerg Roedel <joro@8bytes.org>

b5f82ddf

iommu/vt-d: Check for NULL pointer when freeing IOMMU data structure · a4eaa86c

由 Jiang Liu 提交于 2月 19, 2014

Domain id 0 will be assigned to invalid translation without allocating
domain data structure if DMAR unit supports caching mode. So in function
free_dmar_iommu(), we should check whether the domain pointer is NULL,
otherwise it will cause system crash as below:
[    6.790519] BUG: unable to handle kernel NULL pointer dereference at 00000000000000c8
[    6.799520] IP: [<ffffffff810e2dc8>] __lock_acquire+0x11f8/0x1430
[    6.806493] PGD 0
[    6.817972] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[    6.823303] Modules linked in:
[    6.826862] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1+ #126
[    6.834252] Hardware name: Intel Corporation BRICKLAND/BRICKLAND, BIOS BRIVTIN1.86B.0047.R00.1402050741 02/05/2014
[    6.845951] task: ffff880455a80000 ti: ffff880455a88000 task.ti: ffff880455a88000
[    6.854437] RIP: 0010:[<ffffffff810e2dc8>]  [<ffffffff810e2dc8>] __lock_acquire+0x11f8/0x1430
[    6.864154] RSP: 0000:ffff880455a89ce0  EFLAGS: 00010046
[    6.870179] RAX: 0000000000000046 RBX: 0000000000000002 RCX: 0000000000000000
[    6.878249] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 00000000000000c8
[    6.886318] RBP: ffff880455a89d40 R08: 0000000000000002 R09: 0000000000000001
[    6.894387] R10: 0000000000000000 R11: 0000000000000001 R12: ffff880455a80000
[    6.902458] R13: 0000000000000000 R14: 00000000000000c8 R15: 0000000000000000
[    6.910520] FS:  0000000000000000(0000) GS:ffff88045b800000(0000) knlGS:0000000000000000
[    6.919687] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[    6.926198] CR2: 00000000000000c8 CR3: 0000000001e0e000 CR4: 00000000001407f0
[    6.934269] Stack:
[    6.936588]  ffffffffffffff10 ffffffff810f59db 0000000000000010 0000000000000246
[    6.945219]  ffff880455a89d10 0000000000000000 ffffffff82bcb980 0000000000000046
[    6.953850]  0000000000000000 0000000000000000 0000000000000002 0000000000000000
[    6.962482] Call Trace:
[    6.965300]  [<ffffffff810f59db>] ? vprintk_emit+0x4fb/0x5a0
[    6.971716]  [<ffffffff810e3185>] lock_acquire+0x185/0x200
[    6.977941]  [<ffffffff821fbbee>] ? init_dmars+0x839/0xa1d
[    6.984167]  [<ffffffff81870b06>] _raw_spin_lock_irqsave+0x56/0x90
[    6.991158]  [<ffffffff821fbbee>] ? init_dmars+0x839/0xa1d
[    6.997380]  [<ffffffff821fbbee>] init_dmars+0x839/0xa1d
[    7.003410]  [<ffffffff8147d575>] ? pci_get_dev_by_id+0x75/0xd0
[    7.010119]  [<ffffffff821fc146>] intel_iommu_init+0x2f0/0x502
[    7.016735]  [<ffffffff821a7947>] ? iommu_setup+0x27d/0x27d
[    7.023056]  [<ffffffff821a796f>] pci_iommu_init+0x28/0x52
[    7.029282]  [<ffffffff81002162>] do_one_initcall+0xf2/0x220
[    7.035702]  [<ffffffff810a4a29>] ? parse_args+0x2c9/0x450
[    7.041919]  [<ffffffff8219d1b1>] kernel_init_freeable+0x1c9/0x25b
[    7.048919]  [<ffffffff8219c8d2>] ? do_early_param+0x8a/0x8a
[    7.055336]  [<ffffffff8184d3f0>] ? rest_init+0x150/0x150
[    7.061461]  [<ffffffff8184d3fe>] kernel_init+0xe/0x100
[    7.067393]  [<ffffffff8187b5fc>] ret_from_fork+0x7c/0xb0
[    7.073518]  [<ffffffff8184d3f0>] ? rest_init+0x150/0x150
[    7.079642] Code: 01 76 18 89 05 46 04 36 01 41 be 01 00 00 00 e9 2f 02 00 00 0f 1f 80 00 00 00 00 41 be 01 00 00 00 e9 1d 02 00 00 0f 1f 44 00 00 <49> 81 3e c0 31 34 82 b8 01 00 00 00 0f 44 d8 41 83 ff 01 0f 87
[    7.104944] RIP  [<ffffffff810e2dc8>] __lock_acquire+0x11f8/0x1430
[    7.112008]  RSP <ffff880455a89ce0>
[    7.115988] CR2: 00000000000000c8
[    7.119784] ---[ end trace 13d756f0f462c538 ]---
[    7.125034] note: swapper/0[1] exited with preempt_count 1
[    7.131285] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009
[    7.131285]
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NJoerg Roedel <joro@8bytes.org>

a4eaa86c

iommu/vt-d: Fix incorrect iommu_count for si_domain · 9ebd682e

由 Jiang Liu 提交于 2月 19, 2014

The iommu_count field in si_domain(static identity domain) is
initialized to zero and never increases. It will underflow
when tearing down iommu unit in function free_dmar_iommu()
and leak memory. So refine code to correctly manage
si_domain->iommu_count.

Warning message caused by si_domain memory leak:
[   14.609681] IOMMU: Setting RMRR:
[   14.613496] Ignoring identity map for HW passthrough device 0000:00:1a.0 [0xbdcfd000 - 0xbdd1dfff]
[   14.623809] Ignoring identity map for HW passthrough device 0000:00:1d.0 [0xbdcfd000 - 0xbdd1dfff]
[   14.634162] IOMMU: Prepare 0-16MiB unity mapping for LPC
[   14.640329] Ignoring identity map for HW passthrough device 0000:00:1f.0 [0x0 - 0xffffff]
[   14.673360] IOMMU: dmar init failed
[   14.678157] kmem_cache_destroy iommu_devinfo: Slab cache still has objects
[   14.686076] CPU: 12 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc1-gerry+ #59
[   14.694176] Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.99.99.x059.091020121352 09/10/2012
[   14.707412]  0000000000000000 ffff88042dd33db0 ffffffff8156223d ffff880c2cc37c00
[   14.716407]  ffff88042dd33dc8 ffffffff811790b1 ffff880c2d3533b8 ffff88042dd33e00
[   14.725468]  ffffffff81dc7a6a ffffffff81b1e8e0 ffffffff81f84058 ffffffff81d8a711
[   14.734464] Call Trace:
[   14.737453]  [<ffffffff8156223d>] dump_stack+0x4d/0x66
[   14.743430]  [<ffffffff811790b1>] kmem_cache_destroy+0xf1/0x100
[   14.750279]  [<ffffffff81dc7a6a>] intel_iommu_init+0x122/0x56a
[   14.757035]  [<ffffffff81d8a711>] ? iommu_setup+0x27d/0x27d
[   14.763491]  [<ffffffff81d8a739>] pci_iommu_init+0x28/0x52
[   14.769846]  [<ffffffff81000342>] do_one_initcall+0x122/0x180
[   14.776506]  [<ffffffff81077738>] ? parse_args+0x1e8/0x320
[   14.782866]  [<ffffffff81d850e8>] kernel_init_freeable+0x1e1/0x26c
[   14.789994]  [<ffffffff81d84833>] ? do_early_param+0x88/0x88
[   14.796556]  [<ffffffff8154ffc0>] ? rest_init+0xd0/0xd0
[   14.802626]  [<ffffffff8154ffce>] kernel_init+0xe/0x130
[   14.808698]  [<ffffffff815756ac>] ret_from_fork+0x7c/0xb0
[   14.814963]  [<ffffffff8154ffc0>] ? rest_init+0xd0/0xd0
[   14.821640] kmem_cache_destroy iommu_domain: Slab cache still has objects
[   14.829456] CPU: 12 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc1-gerry+ #59
[   14.837562] Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.99.99.x059.091020121352 09/10/2012
[   14.850803]  0000000000000000 ffff88042dd33db0 ffffffff8156223d ffff88102c1ee3c0
[   14.861222]  ffff88042dd33dc8 ffffffff811790b1 ffff880c2d3533b8 ffff88042dd33e00
[   14.870284]  ffffffff81dc7a76 ffffffff81b1e8e0 ffffffff81f84058 ffffffff81d8a711
[   14.879271] Call Trace:
[   14.882227]  [<ffffffff8156223d>] dump_stack+0x4d/0x66
[   14.888197]  [<ffffffff811790b1>] kmem_cache_destroy+0xf1/0x100
[   14.895034]  [<ffffffff81dc7a76>] intel_iommu_init+0x12e/0x56a
[   14.901781]  [<ffffffff81d8a711>] ? iommu_setup+0x27d/0x27d
[   14.908238]  [<ffffffff81d8a739>] pci_iommu_init+0x28/0x52
[   14.914594]  [<ffffffff81000342>] do_one_initcall+0x122/0x180
[   14.921244]  [<ffffffff81077738>] ? parse_args+0x1e8/0x320
[   14.927598]  [<ffffffff81d850e8>] kernel_init_freeable+0x1e1/0x26c
[   14.934738]  [<ffffffff81d84833>] ? do_early_param+0x88/0x88
[   14.941309]  [<ffffffff8154ffc0>] ? rest_init+0xd0/0xd0
[   14.947380]  [<ffffffff8154ffce>] kernel_init+0xe/0x130
[   14.953430]  [<ffffffff815756ac>] ret_from_fork+0x7c/0xb0
[   14.959689]  [<ffffffff8154ffc0>] ? rest_init+0xd0/0xd0
[   14.966299] kmem_cache_destroy iommu_iova: Slab cache still has objects
[   14.973923] CPU: 12 PID: 1 Comm: swapper/0 Not tainted 3.13.0-rc1-gerry+ #59
[   14.982020] Hardware name: Intel Corporation LH Pass ........../SVRBD-ROW_T, BIOS SE5C600.86B.99.99.x059.091020121352 09/10/2012
[   14.995263]  0000000000000000 ffff88042dd33db0 ffffffff8156223d ffff88042cb5c980
[   15.004265]  ffff88042dd33dc8 ffffffff811790b1 ffff880c2d3533b8 ffff88042dd33e00
[   15.013322]  ffffffff81dc7a82 ffffffff81b1e8e0 ffffffff81f84058 ffffffff81d8a711
[   15.022318] Call Trace:
[   15.025238]  [<ffffffff8156223d>] dump_stack+0x4d/0x66
[   15.031202]  [<ffffffff811790b1>] kmem_cache_destroy+0xf1/0x100
[   15.038038]  [<ffffffff81dc7a82>] intel_iommu_init+0x13a/0x56a
[   15.044786]  [<ffffffff81d8a711>] ? iommu_setup+0x27d/0x27d
[   15.051242]  [<ffffffff81d8a739>] pci_iommu_init+0x28/0x52
[   15.057601]  [<ffffffff81000342>] do_one_initcall+0x122/0x180
[   15.064254]  [<ffffffff81077738>] ? parse_args+0x1e8/0x320
[   15.070608]  [<ffffffff81d850e8>] kernel_init_freeable+0x1e1/0x26c
[   15.077747]  [<ffffffff81d84833>] ? do_early_param+0x88/0x88
[   15.084300]  [<ffffffff8154ffc0>] ? rest_init+0xd0/0xd0
[   15.090362]  [<ffffffff8154ffce>] kernel_init+0xe/0x130
[   15.096431]  [<ffffffff815756ac>] ret_from_fork+0x7c/0xb0
[   15.102693]  [<ffffffff8154ffc0>] ? rest_init+0xd0/0xd0
[   15.189273] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: NJoerg Roedel <joro@8bytes.org>

9ebd682e

iommu/vt-d: Reduce duplicated code to handle virtual machine domains · 92d03cc8

由 Jiang Liu 提交于 2月 19, 2014

Reduce duplicated code to handle virtual machine domains, there's no
functionality changes. It also improves code readability.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NJoerg Roedel <joro@8bytes.org>

92d03cc8

iommu/vt-d: Free resources if failed to create domain for PCIe endpoint · e85bb5d4

由 Jiang Liu 提交于 2月 19, 2014

Enhance function get_domain_for_dev() to release allocated resources
if failed to create domain for PCIe endpoint, otherwise the allocated
resources will get lost.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NJoerg Roedel <joro@8bytes.org>

e85bb5d4

iommu/vt-d: Simplify function get_domain_for_dev() · 745f2586

由 Jiang Liu 提交于 2月 19, 2014

Function get_domain_for_dev() is a little complex, simplify it
by factoring out dmar_search_domain_by_dev_info() and
dmar_insert_dev_info().
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NJoerg Roedel <joro@8bytes.org>

745f2586

iommu/vt-d: Move private structures and variables into intel-iommu.c · b94e4117

由 Jiang Liu 提交于 2月 19, 2014

Move private structures and variables into intel-iommu.c, which will
help to simplify locking policy for hotplug. Also delete redundant
declarations.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NJoerg Roedel <joro@8bytes.org>

b94e4117

openeuler / Kernel 1 年多 前同步成功

openeuler / Kernel
1 年多前同步成功