Pull NVMe fixes from Christoph:

"nvme fixes for Linux 6.1

 - add NVME_QUIRK_BOGUS_NID for Lexar NM760 (Abhijit)
 - avoid the deepest sleep state on ZHITAI TiPro5000 SSDs (Xi Ruoyao)
 - fix possible hang caused during ctrl deletion (Sagi Grimberg)
 - fix possible hang in live ns resize with ANA access (Sagi Grimberg)"

* tag 'nvme-6.1-2022-10-12' of git://git.infradead.org/nvme:
  nvme-multipath: fix possible hang in live ns resize with ANA access
  nvme-pci: avoid the deepest sleep state on ZHITAI TiPro5000 SSDs
  nvme-pci: add NVME_QUIRK_BOGUS_NID for Lexar NM760
  nvme-tcp: fix possible hang caused during ctrl deletion
  nvme-rdma: fix possible hang caused during ctrl deletion

When we revalidate paths as part of ns size change (as of commit
e7d65803), it is possible that during the path revalidation, the
only paths that is IO capable (i.e. optimized/non-optimized) are the
ones that ns resize was not yet informed to the host, which will cause
inflight requests to be requeued (as we have available paths but none
are IO capable). These requests on the requeue list are waiting for
someone to resubmit them at some point.

The IO capable paths will eventually notify the ns resize change to the
host, but there is nothing that will kick the requeue list to resubmit
the queued requests.

Fix this by always kicking the requeue list, and if no IO capable path
exists, these requests will be queued again.

A typical log that indicates that IOs are requeued:
--
nvme nvme1: creating 4 I/O queues.
nvme nvme1: new ctrl: "testnqn1"
nvme nvme2: creating 4 I/O queues.
nvme nvme2: mapped 4/0/0 default/read/poll queues.
nvme nvme2: new ctrl: NQN "testnqn1", addr 127.0.0.1:8009
nvme nvme1: rescanning namespaces.
nvme1n1: detected capacity change from 2097152 to 4194304
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
block nvme1n1: no usable path - requeuing I/O
nvme nvme2: rescanning namespaces.
--
Reported-by: NYogev Cohen <yogev@lightbitslabs.com>
Fixes: e7d65803 ("nvme-multipath: revalidate paths during rescan")
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Cc: <stable@vger.kernel.org> # v5.15+
Signed-off-by: NChristoph Hellwig <hch@lst.de>

ZHITAI TiPro5000 SSDs has the same APST sleep problem as its cousin,
TiPro7000.  The quirk for TiPro7000 has been added in
commit 6b961bce ("nvme-pci: avoid the deepest sleep state on
ZHITAI TiPro7000 SSDs"), use the same quirk for TiPro5000.

The ASPT data from "nvme id-ctrl /dev/nvme1":

vid       : 0x1e49
ssvid     : 0x1e49
sn        : ZTA21T0KA2227304LM
mn        : ZHITAI TiPlus5000 1TB
fr        : ZTA09139
[...]
ps    0 : mp:6.50W operational enlat:0 exlat:0 rrt:0 rrl:0
         rwt:0 rwl:0 idle_power:- active_power:-
ps    1 : mp:5.80W operational enlat:0 exlat:0 rrt:1 rrl:1
         rwt:1 rwl:1 idle_power:- active_power:-
ps    2 : mp:3.60W operational enlat:0 exlat:0 rrt:2 rrl:2
         rwt:2 rwl:2 idle_power:- active_power:-
ps    3 : mp:0.0500W non-operational enlat:5000 exlat:10000 rrt:3 rrl:3
         rwt:3 rwl:3 idle_power:- active_power:-
ps    4 : mp:0.0025W non-operational enlat:8000 exlat:45000 rrt:4 rrl:4
         rwt:4 rwl:4 idle_power:- active_power:-
Reported-and-tested-by: NChang Feng <flukehn@gmail.com>
Signed-off-by: NXi Ruoyao <xry111@xry111.site>
Reviewed-by: NChaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Add a quirk to fix Lexar NM760 SSD drives reporting duplicate nsids.
Signed-off-by: NAbhijit <abhijit@abhijittomar.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

When we delete a controller, we execute the following:
1. nvme_stop_ctrl() - stop some work elements that may be
	inflight or scheduled (specifically also .stop_ctrl
	which cancels ctrl error recovery work)
2. nvme_remove_namespaces() - which first flushes scan_work
	to avoid competing ns addition/removal
3. continue to teardown the controller

However, if err_work was scheduled to run in (1), it is designed to
cancel any inflight I/O, particularly I/O that is originating from ns
scan_work in (2), but because it is cancelled in .stop_ctrl(), we can
prevent forward progress of (2) as ns scanning is blocking on I/O
(that will never be cancelled).

The race is:
1. transport layer error observed -> err_work is scheduled
2. scan_work executes, discovers ns, generate I/O to it
3. nvme_ctop_ctrl() -> .stop_ctrl() -> cancel_work_sync(err_work)
   - err_work never executed
4. nvme_remove_namespaces() -> flush_work(scan_work)
--> deadlock, because scan_work is blocked on I/O that was supposed
to be cancelled by err_work, but was cancelled before executing (see
stack trace [1]).

Fix this by flushing err_work instead of cancelling it, to force it
to execute and cancel all inflight I/O.

[1]:
--
Call Trace:
 <TASK>
 __schedule+0x390/0x910
 ? scan_shadow_nodes+0x40/0x40
 schedule+0x55/0xe0
 io_schedule+0x16/0x40
 do_read_cache_page+0x55d/0x850
 ? __page_cache_alloc+0x90/0x90
 read_cache_page+0x12/0x20
 read_part_sector+0x3f/0x110
 amiga_partition+0x3d/0x3e0
 ? osf_partition+0x33/0x220
 ? put_partition+0x90/0x90
 bdev_disk_changed+0x1fe/0x4d0
 blkdev_get_whole+0x7b/0x90
 blkdev_get_by_dev+0xda/0x2d0
 device_add_disk+0x356/0x3b0
 nvme_mpath_set_live+0x13c/0x1a0 [nvme_core]
 ? nvme_parse_ana_log+0xae/0x1a0 [nvme_core]
 nvme_update_ns_ana_state+0x3a/0x40 [nvme_core]
 nvme_mpath_add_disk+0x120/0x160 [nvme_core]
 nvme_alloc_ns+0x594/0xa00 [nvme_core]
 nvme_validate_or_alloc_ns+0xb9/0x1a0 [nvme_core]
 ? __nvme_submit_sync_cmd+0x1d2/0x210 [nvme_core]
 nvme_scan_work+0x281/0x410 [nvme_core]
 process_one_work+0x1be/0x380
 worker_thread+0x37/0x3b0
 ? process_one_work+0x380/0x380
 kthread+0x12d/0x150
 ? set_kthread_struct+0x50/0x50
 ret_from_fork+0x1f/0x30
 </TASK>
INFO: task nvme:6725 blocked for more than 491 seconds.
      Not tainted 5.15.65-f0.el7.x86_64 #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:nvme            state:D
 stack:    0 pid: 6725 ppid:  1761 flags:0x00004000
Call Trace:
 <TASK>
 __schedule+0x390/0x910
 ? sched_clock+0x9/0x10
 schedule+0x55/0xe0
 schedule_timeout+0x24b/0x2e0
 ? try_to_wake_up+0x358/0x510
 ? finish_task_switch+0x88/0x2c0
 wait_for_completion+0xa5/0x110
 __flush_work+0x144/0x210
 ? worker_attach_to_pool+0xc0/0xc0
 flush_work+0x10/0x20
 nvme_remove_namespaces+0x41/0xf0 [nvme_core]
 nvme_do_delete_ctrl+0x47/0x66 [nvme_core]
 nvme_sysfs_delete.cold.96+0x8/0xd [nvme_core]
 dev_attr_store+0x14/0x30
 sysfs_kf_write+0x38/0x50
 kernfs_fop_write_iter+0x146/0x1d0
 new_sync_write+0x114/0x1b0
 ? intel_pmu_handle_irq+0xe0/0x420
 vfs_write+0x18d/0x270
 ksys_write+0x61/0xe0
 __x64_sys_write+0x1a/0x20
 do_syscall_64+0x37/0x90
 entry_SYSCALL_64_after_hwframe+0x61/0xcb
--

Fixes: 3f2304f8 ("nvme-tcp: add NVMe over TCP host driver")
Reported-by: NJonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Tested-by: NJonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

When we delete a controller, we execute the following:
1. nvme_stop_ctrl() - stop some work elements that may be
        inflight or scheduled (specifically also .stop_ctrl
        which cancels ctrl error recovery work)
2. nvme_remove_namespaces() - which first flushes scan_work
        to avoid competing ns addition/removal
3. continue to teardown the controller

However, if err_work was scheduled to run in (1), it is designed to
cancel any inflight I/O, particularly I/O that is originating from ns
scan_work in (2), but because it is cancelled in .stop_ctrl(), we can
prevent forward progress of (2) as ns scanning is blocking on I/O
(that will never be cancelled).

The race is:
1. transport layer error observed -> err_work is scheduled
2. scan_work executes, discovers ns, generate I/O to it
3. nvme_ctop_ctrl() -> .stop_ctrl() -> cancel_work_sync(err_work)
   - err_work never executed
4. nvme_remove_namespaces() -> flush_work(scan_work)
--> deadlock, because scan_work is blocked on I/O that was supposed
to be cancelled by err_work, but was cancelled before executing.

Fix this by flushing err_work instead of cancelling it, to force it
to execute and cancel all inflight I/O.

Fixes: b435ecea ("nvme: Add .stop_ctrl to nvme ctrl ops")
Fixes: f6c8e432 ("nvme: flush namespace scanning work just before removing namespaces")
Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Merge in later fixes.

* for-6.1/block:
  block: fix leaking minors of hidden disks
  block: avoid sign extend problem with default queue flags mask
  blk-wbt: fix that 'rwb->wc' is always set to 1 in wbt_init()
  block: Remove the repeat word 'can'
  MAINTAINERS: Update SED-Opal Maintainers

The major/minor of a hidden gendisk is not propagated to the block
device because it is never registered using bdev_add.  But the lack of
bd_dev also causes the dynamic major minor number not to be freed.
Assign bd_dev manually to ensure the dynamic major minor gets freed.

Based on a patch by Keith Busch.

Fixes: 8ddcd653 ("block: introduce GENHD_FL_HIDDEN")
Reported-by: NDaniel Wagner <dwagner@suse.de>
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Tested-by: NDaniel Wagner <dwagner@suse.de>
Reviewed-by: NKeith Busch <kbusch@kernel.org>
Link: https://lore.kernel.org/r/20221010131857.748129-1-hch@lst.deSigned-off-by: NJens Axboe <axboe@kernel.dk>

request_queue->queue_flags is unsigned long, which is 8-bytes on
64-bit architectures. Most queue flag modifications occur through
bit field helpers, but default flags can be logically OR'd via the
QUEUE_FLAG_MQ_DEFAULT mask. If this mask happens to include bit 31,
the assignment can sign extend the field and set all upper 32 bits.

This exact problem has been observed on a downstream kernel that
happens to use bit 31 for QUEUE_FLAG_NOWAIT. This is not an
immediate problem for current upstream because bit 31 is not
included in the default flag assignment (and is not used at all,
actually). Regardless, fix up the QUEUE_FLAG_MQ_DEFAULT mask
definition to avoid the landmine in the future.
Signed-off-by: NBrian Foster <bfoster@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221003133534.1075582-1-bfoster@redhat.comSigned-off-by: NJens Axboe <axboe@kernel.dk>

Merge tag 'ucount-rlimits-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ucounts update from Eric Biederman:
 "Split rlimit and ucount values and max values

  After the ucount rlimit code was merged a bunch of small but
  siginificant bugs were found and fixed. At the time it was realized
  that part of the problem was that while the ucount rlimits were very
  similar to the oridinary ucounts (in being nested counts with limits)
  the semantics were slightly different and the code would be less error
  prone if there was less sharing.

  This is the long awaited cleanup that should hopefully keep things
  more comprehensible and less error prone for whoever needs to touch
  that code next"

* tag 'ucount-rlimits-cleanups-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ucounts: Split rlimit and ucount values and max values

Merge tag 'signal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ptrace update from Eric Biederman:
 "ptrace: Stop supporting SIGKILL for PTRACE_EVENT_EXIT

  Recently I had a conversation where it was pointed out to me that
  SIGKILL sent to a tracee stropped in PTRACE_EVENT_EXIT is quite
  difficult for a tracer to handle.

  Keeping SIGKILL working after the process has been killed is pain from
  an implementation point of view.

  So since the debuggers don't want this behavior let's see if we can
  remove this wart for the userspace API

  If a regression is detected it should only need to be the last change
  that is the reverted. The other two are just general cleanups that
  make the last patch simpler"

* tag 'signal-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  signal: Drop signals received after a fatal signal has been processed
  signal: Guarantee that SIGNAL_GROUP_EXIT is set on process exit
  signal: Ensure SIGNAL_GROUP_EXIT gets set in do_group_exit

Merge tag 'retire_mq_sysctls-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull mqueue fix from Eric Biederman:
 "A fix for an unlikely but possible memory leak"

* tag 'retire_mq_sysctls-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ipc: mqueue: fix possible memory leak in init_mqueue_fs()

Merge tag 'interrupting_kthread_stop-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull kthread update from Eric Biederman:
 "Break out of wait loops on kthread_stop()

  This is a small tweak to kthread_stop so it breaks out of
  interruptible waits, that don't explicitly test for kthread_stop.

  These interruptible waits occassionaly occur in kernel threads do to
  code sharing"

* tag 'interrupting_kthread_stop-for-v5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  signal: break out of wait loops on kthread_stop()

Pull powerpc updates from Michael Ellerman:

 - Remove our now never-true definitions for pgd_huge() and p4d_leaf().

 - Add pte_needs_flush() and huge_pmd_needs_flush() for 64-bit.

 - Add support for syscall wrappers.

 - Add support for KFENCE on 64-bit.

 - Update 64-bit HV KVM to use the new guest state entry/exit accounting
   API.

 - Support execute-only memory when using the Radix MMU (P9 or later).

 - Implement CONFIG_PARAVIRT_TIME_ACCOUNTING for pseries guests.

 - Updates to our linker script to move more data into read-only
   sections.

 - Allow the VDSO to be randomised on 32-bit.

 - Many other small features and fixes.

Thanks to Andrew Donnellan, Aneesh Kumar K.V, Arnd Bergmann, Athira
Rajeev, Christophe Leroy, David Hildenbrand, Disha Goel, Fabiano Rosas,
Gaosheng Cui, Gustavo A. R. Silva, Haren Myneni, Hari Bathini, Jilin
Yuan, Joel Stanley, Kajol Jain, Kees Cook, Krzysztof Kozlowski, Laurent
Dufour, Liang He, Li Huafei, Lukas Bulwahn, Madhavan Srinivasan, Nathan
Chancellor, Nathan Lynch, Nicholas Miehlbradt, Nicholas Piggin, Pali
Rohár, Rohan McLure, Russell Currey, Sachin Sant, Segher Boessenkool,
Shrikanth Hegde, Tyrel Datwyler, Wolfram Sang, ye xingchen, and Zheng
Yongjun.

* tag 'powerpc-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (214 commits)
  KVM: PPC: Book3S HV: Fix stack frame regs marker
  powerpc: Don't add __powerpc_ prefix to syscall entry points
  powerpc/64s/interrupt: Fix stack frame regs marker
  powerpc/64: Fix msr_check_and_set/clear MSR[EE] race
  powerpc/64s/interrupt: Change must-hard-mask interrupt check from BUG to WARN
  powerpc/pseries: Add firmware details to the hardware description
  powerpc/powernv: Add opal details to the hardware description
  powerpc: Add device-tree model to the hardware description
  powerpc/64: Add logical PVR to the hardware description
  powerpc: Add PVR & CPU name to hardware description
  powerpc: Add hardware description string
  powerpc/configs: Enable PPC_UV in powernv_defconfig
  powerpc/configs: Update config files for removed/renamed symbols
  powerpc/mm: Fix UBSAN warning reported on hugetlb
  powerpc/mm: Always update max/min_low_pfn in mem_topology_setup()
  powerpc/mm/book3s/hash: Rename flush_tlb_pmd_range
  powerpc: Drops STABS_DEBUG from linker scripts
  powerpc/64s: Remove lost/old comment
  powerpc/64s: Remove old STAB comment
  powerpc: remove orphan systbl_chk.sh
  ...

Pull s390 updates from Vasily Gorbik:

 - Make use of the IBM z16 processor activity instrumentation facility
   extension to count neural network processor assist operations: add a
   new PMU device driver so that perf can make use of this.

 - Rework memcpy_real() to avoid DAT-off mode.

 - Rework absolute lowcore access code.

 - Various small fixes and improvements all over the code.

* tag 's390-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: remove unused bus_next field from struct zpci_dev
  s390/cio: remove unused ccw_device_force_console() declaration
  s390/pai: Add support for PAI Extension 1 NNPA counters
  s390/mm: fix no previous prototype warnings in maccess.c
  s390/mm: uninline copy_oldmem_kernel() function
  s390/mm,ptdump: add real memory copy page markers
  s390/mm: rework memcpy_real() to avoid DAT-off mode
  s390/dump: save IPL CPU registers once DAT is available
  s390/pci: convert high_memory to physical address
  s390/smp,ptdump: add absolute lowcore markers
  s390/smp: rework absolute lowcore access
  s390/smp: call smp_reinit_ipl_cpu() before scheduler is available
  s390/ptdump: add missing amode31 markers
  s390/mm: split lowcore pages with set_memory_4k()
  s390/mm: remove unused access parameter from do_fault_error()
  s390/delay: sync comment within __delay() with reality
  s390: move from strlcpy with unused retval to strscpy

Pull RISC-V updates from Palmer Dabbelt:

 - Improvements to the CPU topology subsystem, which fix some issues
   where RISC-V would report bad topology information.

 - The default NR_CPUS has increased to XLEN, and the maximum
   configurable value is 512.

 - The CD-ROM filesystems have been enabled in the defconfig.

 - Support for THP_SWAP has been added for rv64 systems.

There are also a handful of cleanups and fixes throughout the tree.

* tag 'riscv-for-linus-6.1-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: enable THP_SWAP for RV64
  RISC-V: Print SSTC in canonical order
  riscv: compat: s/failed/unsupported if compat mode isn't supported
  RISC-V: Increase range and default value of NR_CPUS
  cpuidle: riscv-sbi: Fix CPU_PM_CPU_IDLE_ENTER_xyz() macro usage
  perf: RISC-V: throttle perf events
  perf: RISC-V: exclude invalid pmu counters from SBI calls
  riscv: enable CD-ROM file systems in defconfig
  riscv: topology: fix default topology reporting
  arm64: topology: move store_cpu_topology() to shared code

Pull microblaze updates from Michal Simek:
 "This adds architecture support for error injection which can be done
  only via local memory (BRAM) with enabling path for recovery after
  reset.

  These patches targets Triple Modular Redundacy (TMR) configuration
  where 3 Microblazes are running in parallel with monitoring logic.

  When an error happens (or is injected) system goes to break handler
  with full CPU reset and system recovery back to origin context. More
  information can be found at [1]"

Link: https://www.xilinx.com/content/dam/xilinx/support/documents/ip_documentation/tmr/v1_0/pg268-tmr.pdf [1]

* tag 'microblaze-v6.1' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: Add support for error injection
  microblaze: Add custom break vector handler for mb manager
  microblaze: Add xmb_manager_register function

Pull kvm updates from Paolo Bonzini:
 "The first batch of KVM patches, mostly covering x86.

  ARM:

   - Account stage2 page table allocations in memory stats

  x86:

   - Account EPT/NPT arm64 page table allocations in memory stats

   - Tracepoint cleanups/fixes for nested VM-Enter and emulated MSR
     accesses

   - Drop eVMCS controls filtering for KVM on Hyper-V, all known
     versions of Hyper-V now support eVMCS fields associated with
     features that are enumerated to the guest

   - Use KVM's sanitized VMCS config as the basis for the values of
     nested VMX capabilities MSRs

   - A myriad event/exception fixes and cleanups. Most notably, pending
     exceptions morph into VM-Exits earlier, as soon as the exception is
     queued, instead of waiting until the next vmentry. This fixed a
     longstanding issue where the exceptions would incorrecly become
     double-faults instead of triggering a vmexit; the common case of
     page-fault vmexits had a special workaround, but now it's fixed for
     good

   - A handful of fixes for memory leaks in error paths

   - Cleanups for VMREAD trampoline and VMX's VM-Exit assembly flow

   - Never write to memory from non-sleepable kvm_vcpu_check_block()

   - Selftests refinements and cleanups

   - Misc typo cleanups

  Generic:

   - remove KVM_REQ_UNHALT"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (94 commits)
  KVM: remove KVM_REQ_UNHALT
  KVM: mips, x86: do not rely on KVM_REQ_UNHALT
  KVM: x86: never write to memory from kvm_vcpu_check_block()
  KVM: x86: Don't snapshot pending INIT/SIPI prior to checking nested events
  KVM: nVMX: Make event request on VMXOFF iff INIT/SIPI is pending
  KVM: nVMX: Make an event request if INIT or SIPI is pending on VM-Enter
  KVM: SVM: Make an event request if INIT or SIPI is pending when GIF is set
  KVM: x86: lapic does not have to process INIT if it is blocked
  KVM: x86: Rename kvm_apic_has_events() to make it INIT/SIPI specific
  KVM: x86: Rename and expose helper to detect if INIT/SIPI are allowed
  KVM: nVMX: Make an event request when pending an MTF nested VM-Exit
  KVM: x86: make vendor code check for all nested events
  mailmap: Update Oliver's email address
  KVM: x86: Allow force_emulation_prefix to be written without a reload
  KVM: selftests: Add an x86-only test to verify nested exception queueing
  KVM: selftests: Use uapi header to get VMX and SVM exit reasons/codes
  KVM: x86: Rename inject_pending_events() to kvm_check_and_inject_events()
  KVM: VMX: Update MTF and ICEBP comments to document KVM's subtle behavior
  KVM: x86: Treat pending TRIPLE_FAULT requests as pending exceptions
  KVM: x86: Morph pending exceptions to pending VM-Exits at queue time
  ...

Pull EFI updates from Ard Biesheuvel:
 "A bit more going on than usual in the EFI subsystem. The main driver
  for this has been the introduction of the LoonArch architecture last
  cycle, which inspired some cleanup and refactoring of the EFI code.
  Another driver for EFI changes this cycle and in the future is
  confidential compute.

  The LoongArch architecture does not use either struct bootparams or DT
  natively [yet], and so passing information between the EFI stub and
  the core kernel using either of those is undesirable. And in general,
  overloading DT has been a source of issues on arm64, so using DT for
  this on new architectures is a to avoid for the time being (even if we
  might converge on something DT based for non-x86 architectures in the
  future). For this reason, in addition to the patch that enables EFI
  boot for LoongArch, there are a number of refactoring patches applied
  on top of which separate the DT bits from the generic EFI stub bits.
  These changes are on a separate topich branch that has been shared
  with the LoongArch maintainers, who will include it in their pull
  request as well. This is not ideal, but the best way to manage the
  conflicts without stalling LoongArch for another cycle.

  Another development inspired by LoongArch is the newly added support
  for EFI based decompressors. Instead of adding yet another
  arch-specific incarnation of this pattern for LoongArch, we are
  introducing an EFI app based on the existing EFI libstub
  infrastructure that encapulates the decompression code we use on other
  architectures, but in a way that is fully generic. This has been
  developed and tested in collaboration with distro and systemd folks,
  who are eager to start using this for systemd-boot and also for arm64
  secure boot on Fedora. Note that the EFI zimage files this introduces
  can also be decompressed by non-EFI bootloaders if needed, as the
  image header describes the location of the payload inside the image,
  and the type of compression that was used. (Note that Fedora's arm64
  GRUB is buggy [0] so you'll need a recent version or switch to
  systemd-boot in order to use this.)

  Finally, we are adding TPM measurement of the kernel command line
  provided by EFI. There is an oversight in the TCG spec which results
  in a blind spot for command line arguments passed to loaded images,
  which means that either the loader or the stub needs to take the
  measurement. Given the combinatorial explosion I am anticipating when
  it comes to firmware/bootloader stacks and firmware based attestation
  protocols (SEV-SNP, TDX, DICE, DRTM), it is good to set a baseline now
  when it comes to EFI measured boot, which is that the kernel measures
  the initrd and command line. Intermediate loaders can measure
  additional assets if needed, but with the baseline in place, we can
  deploy measured boot in a meaningful way even if you boot into Linux
  straight from the EFI firmware.

  Summary:

   - implement EFI boot support for LoongArch

   - implement generic EFI compressed boot support for arm64, RISC-V and
     LoongArch, none of which implement a decompressor today

   - measure the kernel command line into the TPM if measured boot is in
     effect

   - refactor the EFI stub code in order to isolate DT dependencies for
     architectures other than x86

   - avoid calling SetVirtualAddressMap() on arm64 if the configured
     size of the VA space guarantees that doing so is unnecessary

   - move some ARM specific code out of the generic EFI source files

   - unmap kernel code from the x86 mixed mode 1:1 page tables"

* tag 'efi-next-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: (24 commits)
  efi/arm64: libstub: avoid SetVirtualAddressMap() when possible
  efi: zboot: create MemoryMapped() device path for the parent if needed
  efi: libstub: fix up the last remaining open coded boot service call
  efi/arm: libstub: move ARM specific code out of generic routines
  efi/libstub: measure EFI LoadOptions
  efi/libstub: refactor the initrd measuring functions
  efi/loongarch: libstub: remove dependency on flattened DT
  efi: libstub: install boot-time memory map as config table
  efi: libstub: remove DT dependency from generic stub
  efi: libstub: unify initrd loading between architectures
  efi: libstub: remove pointless goto kludge
  efi: libstub: simplify efi_get_memory_map() and struct efi_boot_memmap
  efi: libstub: avoid efi_get_memory_map() for allocating the virt map
  efi: libstub: drop pointless get_memory_map() call
  efi: libstub: fix type confusion for load_options_size
  arm64: efi: enable generic EFI compressed boot
  loongarch: efi: enable generic EFI compressed boot
  riscv: efi: enable generic EFI compressed boot
  efi/libstub: implement generic EFI zboot
  efi/libstub: move efi_system_table global var into separate object
  ...

commit 8c5035df ("blk-wbt: call rq_qos_add() after wb_normal is
initialized") moves wbt_set_write_cache() before rq_qos_add(), which
is wrong because wbt_rq_qos() is still NULL.

Fix the problem by removing wbt_set_write_cache() and setting 'rwb->wc'
directly. Noted that this patch also remove the redundant setting of
'rab->wc'.

Fixes: 8c5035df ("blk-wbt: call rq_qos_add() after wb_normal is initialized")
Reported-by: Nkernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202210081045.77ddf59b-yujie.liu@intel.comSigned-off-by: NYu Kuai <yukuai3@huawei.com>
Reviewed-by: NMing Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221009101038.1692875-1-yukuai1@huaweicloud.comSigned-off-by: NJens Axboe <axboe@kernel.dk>

Pull mailbox updates from Jassi Brar:

 - apple: implement poll and flush callbacks

 - qcom: fix clocks for IPQ6018 and IPQ8074 irq handler as not-a-thread

 - microchip: split reg-space into two

 - imx: RST channel fix

 - bcm: fix dma_map_sg error handling

 - misc: spelling fix in pcc driver

* tag 'mailbox-v6.1' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: qcom-ipcc: flag IRQ NO_THREAD
  mailbox: pcc: Fix spelling mistake "Plaform" -> "Platform"
  mailbox: bcm-ferxrm-mailbox: Fix error check for dma_map_sg
  mailbox: qcom-apcs-ipc: add IPQ8074 APSS clock support
  dt-bindings: mailbox: qcom: correct clocks for IPQ6018 and IPQ8074
  dt-bindings: mailbox: qcom: set correct #clock-cells
  mailbox: mpfs: account for mbox offsets while sending
  mailbox: mpfs: fix handling of the reg property
  dt-bindings: mailbox: fix the mpfs' reg property
  mailbox: imx: fix RST channel support
  mailbox: apple: Implement poll_data() operation
  mailbox: apple: Implement flush() operation

Pull clk updates from Stephen Boyd:
 "We have some late breaking reports that a patch series to rework clk
  rate range support broke boot on some devices, so I've left that
  branch out of this. Hopefully we can get to that next week, or punt on
  it and let it bake another cycle. That means we don't really have any
  changes to the core framework this time around besides a few typo
  fixes. Instead this is all clk driver updates and fixes.

  The usual suspects are here (again), with Qualcomm dominating the
  diffstat. We look to have gained support for quite a few new Qualcomm
  SoCs and Dmitry worked on updating many of the existing Qualcomm
  drivers to use clk_parent_data. After that we have MediaTek drivers
  getting some much needed updates, in particular to support GPU DVFS.
  There are also quite a few Samsung clk driver patches, but that's
  mostly because there was a maintainer change and so last release we
  missed some of those patches.

  Overall things look normal, but I'm slowly reviewing core framework
  code nowadays and that shows given the rate range patches had to be
  yanked last minute. Let's hope this situation changes soon.

  New Drivers:
   - Support for Renesas VersaClock7 clock generator family
   - Add Spreadtrum UMS512 SoC clk support
   - New clock drivers for MediaTek Helio X10 MT6795
   - Display clks for Qualcomm SM6115, SM8450
   - GPU clks for Qualcomm SC8280XP
   - Qualcomm MSM8909 and SM6375 global and SMD RPM clk drivers

  Deleted Drivers:
   - Remove DaVinci DM644x and DM646x clk driver support

  Updates:
   - Convert Baikal-T1 CCU driver to platform driver
   - Split reset support out of primary Baikal-T1 CCU driver
   - Add some missing clks required for RPiVid Video Decoder on
     RaspberryPi
   - Mark PLLC critical on bcm2835
   - More devm helpers for fixed rate registration
   - Various PXA168 clk driver fixes
   - Add resets for MediaTek MT8195 PCIe and USB
   - Miscellaneous of_node_put() fixes
   - Nuke dt-bindings/clk path (again) by moving headers to
     dt-bindings/clock
   - Convert gpio-clk-gate binding to YAML
   - Various fixes to AMD/Xilinx Zynqmp clk driver
   - Graduate AMD/Xilinx "clocking wizard" driver from staging
   - Add missing DPI1_HDMI clock in MT8195 VDOSYS1
   - Clock driver changes to support GPU DVFS on MT8183, MT8192, MT8195
   - Fix GPU clock topology on MT8195
   - Propogate rate changes from GPU clock gate up the tree
   - Clock mux notifiers for GPU-related PLLs
   - Conversion of more "simple" drivers to mtk_clk_simple_probe()
   - Hook up mtk_clk_simple_remove() for "simple" MT8192 clock drivers
   - Fixes to previous |struct clk| to |struct clk_hw| conversion on
     MediaTek
   - Shrink MT8192 clock driver by deduplicating clock parent lists
   - Change order between 'sim_enet_root_clk' and 'enet_qos_root_clk'
     clocks for i.MX8MP
   - Drop unnecessary newline in i.MX8MM dt-bindings
   - Add more MU1 and SAI clocks dt-bindings Ids
   - Introduce slice busy bit check for i.MX93 composite clock
   - Introduce white list bit check for i.MX93 composite clock
   - Add new i.MX93 clock gate
   - Add MU1 and MU2 clocks to i.MX93 clock provider
   - Add SAI IPG clocks to i.MX93 clock provider
   - add generic clocks for U(S)ART available on SAMA5D2 SoCs
   - reset controller support for Polarfire clocks
   - .round_rate and .set rate support for clk-mpfs
   - code cleanup for clk-mpfs
   - PLL support for PolarFire SoC's Clock Conditioning Circuitry
   - Add watchdog, I2C, pin control/GPIO, and Ethernet clocks on R-Car
     V4H
   - Add SDHI, Timer (CMT/TMU), and SPI (MSIOF) clocks on R-Car S4-8
   - Add I2C clocks and resets on RZ/V2M
   - Document clock support for the RZ/Five SoC
   - mux-variant clock using the table variant to select parents
   - clock controller for the rv1126 soc
   - conversion of rk3128 to yaml and relicensing of the yaml bindings
     to gpl2+MIT (following dt-binding guildelines)
   - Exynos7885: add FSYS, TREX and MFC clock controllers
   - Exynos850: add IS and AUD (audio) clock controllers with bindings
   - ExynosAutov9: add FSYS clock controllers with bindings
   - ExynosAutov9: correct clock IDs in bindings of Peric 0 and 1 clock
     controllers, due to duplicated entries. This is an acceptable ABI
     break: recently developed/added platform so without legacies, acked
     by known users/developers
   - ExynosAutov9: add few missing Peric 0/1 gates
   - ExynosAutov9: correct register offsets of few Peric 0/1 clocks
   - Minor code improvements (use of_device_get_match_data() helper,
     code style)
   - Add Krzysztof Kozlowski as co-maintainer of Samsung SoC clocks, as
     he already maintainers that architecture/platform
   - Keep Qualcomm GDSCs enabled when PWRSTS_RET flag is there, solving
     retention issues during suspend of USB on Qualcomm sc7180/sc7280
     and SC8280XP
   - Qualcomm SM6115 and QCM2260 are moved to reuse PLL configuration
   - Qualcomm SDM660 SDCC1 moved to floor clk ops
   - Support for the APCS PLLs for Qualcomm IPQ8064, IPQ8074 and IPQ6018
     was added/fixed
   - The Qualcomm MSM8996 CPU clocks are updated with support for ACD
   - Support for Qualcomm SDM670 GCC and RPMh clks was added
   - Transition to parent_data, parent_hws and use of ARRAY_SIZE() for
     num_parents was done for many Qualcomm SoCs
   - Support for per-reset defined delay on Qualcomm was introduced"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (283 commits)
  clk: qcom: gcc-sm6375: Ensure unsigned long type
  clk: qcom: gcc-sm6375: Remove unused variables
  clk: qcom: kpss-xcc: convert to parent data API
  clk: introduce (devm_)hw_register_mux_parent_data_table API
  clk: allow building lan966x as a module
  clk: clk-xgene: simplify if-if to if-else
  clk: ast2600: BCLK comes from EPLL
  clk: clocking-wizard: Depend on HAS_IOMEM
  clk: clocking-wizard: Use dev_err_probe() helper
  clk: nxp: fix typo in comment
  clk: pxa: add a check for the return value of kzalloc()
  clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975
  dt-bindings: clock: vc5: Add 5P49V6975
  clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable
  clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe
  clk: Renesas versaclock7 ccf device driver
  dt-bindings: Renesas versaclock7 device tree bindings
  clk: ti: Balance of_node_get() calls for of_find_node_by_name()
  clk: imx: scu: fix memleak on platform_device_add() fails
  clk: vc5: Use regmap_{set,clear}_bits() where appropriate
  ...

Pull gpio updates from Bartosz Golaszewski:
 "We have a single new driver, support for a bunch of new models,
  improvements in drivers and core gpiolib code as well device-tree
  bindings changes.

  Summary:

  New driver:
   - IMX System Controller Unit GPIOs

  GPIO core:
   - add fdinfo output for the GPIO character device file descriptors
     (allows user-space to determine which processes own which GPIO
     lines)
   - improvements to OF GPIO code
   - new quirk for Asus UM325UAZ in gpiolib-acpi
   - new quirk for Freescale SPI in gpiolib-of

  Driver improvements:
   - add a new macro that reduces the amount of boilerplate code in ISA
     drivers and use it in relevant drivers
   - support two new models in gpio-pca953x
   - support new model in gpio-f7188x
   - convert more drivers to use immutable irq chips
   - other minor tweaks

  Device-tree bindings:
   - add DT bindings for gpio-imx-scu
   - convert Xilinx GPIO bindings to YAML
   - reference the properties from the SPI peripheral device-tree
     bindings instead of providing custom ones in the GPIO controller
     document
   - add parsing of GPIO hog nodes to the DT bindings for gpio-mpfs-gpio
   - relax the node name requirements in gpio-stmpe
   - add new models for gpio-rcar and gpio-pxa95xx
   - add a new vendor prefix: Diodes (for Diodes, Inc.)

  Misc:
   - pulled in the immutable branch from the x86 platform drivers tree
     including support for a new simatic board that depends on GPIO
     changes"

* tag 'gpio-updates-for-v6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (36 commits)
  gpio: tc3589x: Make irqchip immutable
  gpiolib: cdev: add fdinfo output for line request file descriptors
  gpio: twl4030: Reorder functions which allows to drop a forward declaraion
  gpiolib: fix OOB access in quirk callbacks
  gpiolib: of: factor out conversion from OF flags
  gpiolib: rework quirk handling in of_find_gpio()
  gpiolib: of: make Freescale SPI quirk similar to all others
  gpiolib: of: do not ignore requested index when applying quirks
  gpio: ws16c48: Ensure number of irq matches number of base
  gpio: 104-idio-16: Ensure number of irq matches number of base
  gpio: 104-idi-48: Ensure number of irq matches number of base
  gpio: 104-dio-48e: Ensure number of irq matches number of base
  counter: 104-quad-8: Ensure number of irq matches number of base
  isa: Introduce the module_isa_driver_with_irq helper macro
  gpio: pca953x: Add support for PCAL6534
  gpio: pca953x: Swap if statements to save later complexity
  gpio: pca953x: Fix pca953x_gpio_set_pull_up_down()
  dt-bindings: gpio: pca95xx: add entry for pcal6534 and PI4IOE5V6534Q
  dt-bindings: vendor-prefixes: add Diodes
  gpio: mt7621: Switch to use platform_get_irq() function
  ...

Pull staging driver updates from Greg KH:
 "Here is the large set of staging driver changes for 6.1-rc1.

  Nothing really interesting in here at all except we deleted a driver
  (fwserial) as no one had been using it for a long time. Other than
  that, just the normal cleanups and minor fixes:

   - rtl8723bs driver cleanups

   - loads of r8188eu driver cleanups, making the driver smaller and
     fixing up some firmware dependency issues.

   - vt6655 driver cleanups.

   - lots of other small staging driver cleanups.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (266 commits)
  staging: rtl8192e: Rename variable Bandwidth to avoid CamelCase
  staging: r8188eu: remove PHY_RFConfig8188E()
  staging: r8188eu: remove PHY_RF6052_Config8188E()
  staging: r8188eu: convert ODM_ReadAndConfig_AGC_TAB_1T_8188E() to int
  staging: r8188eu: convert ODM_ReadAndConfig_PHY_REG_1T_8188E() to int
  staging: r8188eu: convert ODM_ReadAndConfig_RadioA_1T_8188E() to int
  staging: r8188eu: convert ODM_ReadAndConfig_MAC_REG_8188E() to int
  staging: rtl8192e: cmdpkt: Use skb_put_data() instead of skb_put/memcpy pair
  staging: r8188eu: Use skb_put_data() instead of skb_put/memcpy pair
  staging: r8188eu: remove hal/odm_RegConfig8188E.c
  staging: r8188eu: make odm_ConfigRF_RadioA_8188E() static
  staging: r8188eu: make odm_ConfigMAC_8188E() static
  staging: r8188eu: don't check for stop/removal in the blink worker
  staging: r8188eu: don't check bSurpriseRemoved in SwLedOff
  staging: rtl8192e: Remove unused variables ForcedAMSDUMaxSize, ...
  staging: rtl8192e: Rename CurrentMPDU..., ForcedAMPDU... and ForcedMPDU...
  staging: rtl8192e: Rename SelfMimoPs, CurrentOpMode and bForcedShortGI
  staging: rtl8192e: Rename PeerMimoPs, IOTAction and IOTRaFunc
  staging: rtl8192e: Rename RxRe...WinSize, RxReorder... and RxReorderDr...
  staging: rtl8192e: Rename szRT2RTAggBuffer, bRegRxRe... and bCurRxReo...
  ...

Pull char/misc and other driver updates from Greg KH:
 "Here is the large set of char/misc and other small driver subsystem
  changes for 6.1-rc1. Loads of different things in here:

   - IIO driver updates, additions, and changes. Probably the largest
     part of the diffstat

   - habanalabs driver update with support for new hardware and
     features, the second largest part of the diff.

   - fpga subsystem driver updates and additions

   - mhi subsystem updates

   - Coresight driver updates

   - gnss subsystem updates

   - extcon driver updates

   - icc subsystem updates

   - fsi subsystem updates

   - nvmem subsystem and driver updates

   - misc driver updates

   - speakup driver additions for new features

   - lots of tiny driver updates and cleanups

  All of these have been in the linux-next tree for a while with no
  reported issues"

* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
  w1: Split memcpy() of struct cn_msg flexible array
  spmi: pmic-arb: increase SPMI transaction timeout delay
  spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
  spmi: pmic-arb: correct duplicate APID to PPID mapping logic
  spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
  spmi: pmic-arb: check apid against limits before calling irq handler
  spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
  spmi: pmic-arb: handle spurious interrupt
  spmi: pmic-arb: add a print in cleanup_irq
  drivers: spmi: Directly use ida_alloc()/free()
  MAINTAINERS: add TI ECAP driver info
  counter: ti-ecap-capture: capture driver support for ECAP
  Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
  dt-bindings: counter: add ti,am62-ecap-capture.yaml
  counter: Introduce the COUNTER_COMP_ARRAY component type
  counter: Consolidate Counter extension sysfs attribute creation
  counter: Introduce the Count capture component
  counter: 104-quad-8: Add Signal polarity component
  counter: Introduce the Signal polarity component
  counter: interrupt-cnt: Implement watch_validate callback
  ...

Pull driver core updates from Greg KH:
 "Here is the big set of driver core and debug printk changes for
  6.1-rc1. Included in here is:

   - dynamic debug updates for the core and the drm subsystem. The drm
     changes have all been acked by the relevant maintainers

   - kernfs fixes for syzbot reported problems

   - kernfs refactors and updates for cgroup requirements

   - magic number cleanups and removals from the kernel tree (they were
     not being used and they really did not actually do anything)

   - other tiny cleanups

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (74 commits)
  docs: filesystems: sysfs: Make text and code for ->show() consistent
  Documentation: NBD_REQUEST_MAGIC isn't a magic number
  a.out: restore CMAGIC
  device property: Add const qualifier to device_get_match_data() parameter
  drm_print: add _ddebug descriptor to drm_*dbg prototypes
  drm_print: prefer bare printk KERN_DEBUG on generic fn
  drm_print: optimize drm_debug_enabled for jump-label
  drm-print: add drm_dbg_driver to improve namespace symmetry
  drm-print.h: include dyndbg header
  drm_print: wrap drm_*_dbg in dyndbg descriptor factory macro
  drm_print: interpose drm_*dbg with forwarding macros
  drm: POC drm on dyndbg - use in core, 2 helpers, 3 drivers.
  drm_print: condense enum drm_debug_category
  debugfs: use DEFINE_SHOW_ATTRIBUTE to define debugfs_regset32_fops
  driver core: use IS_ERR_OR_NULL() helper in device_create_groups_vargs()
  Documentation: ENI155_MAGIC isn't a magic number
  Documentation: NBD_REPLY_MAGIC isn't a magic number
  nbd: remove define-only NBD_MAGIC, previously magic number
  Documentation: FW_HEADER_MAGIC isn't a magic number
  Documentation: EEPROM_MAGIC_VALUE isn't a magic number
  ...

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver changes for 6.1-rc1.

  Nothing major in here, lots of little things with new devices
  supported and updates for a few drivers. Highlights include:

   - thunderbolt/USB4 devices supported a bit better than before, and
     some new ids to enable new hardware devices

   - USB gadget uvc updates for newer video formats and better v4l
     integration (the v4l portions were acked by those maintainers)

   - typec updates for tiny issues and more typec drivers for new chips.

   - xhci tiny updates for minor issues

   - big usb-serial ftdi_sio driver update to handle new devices better

   - lots of tiny dwc3 fixes and updates for the IP block that is
     showing up everywhere these days

   - dts updates for new devices being supported

   - other tiny janitorial and cleanups fixes for lots of different USB
     drivers. Full details are in the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (169 commits)
  usb: gadget: uvc: don't put item still in use
  usb: gadget: uvc: Fix argument to sizeof() in uvc_register_video()
  usb: host: ehci-exynos: switch to using gpiod API
  Revert "usb: dwc3: Don't switch OTG -> peripheral if extcon is present"
  Revert "USB: fixup for merge issue with "usb: dwc3: Don't switch OTG -> peripheral if extcon is present""
  dt-bindings: usb: Convert FOTG210 to dt schema
  usb: mtu3: fix failed runtime suspend in host only mode
  USB: omap_udc: Fix spelling mistake: "tranceiver_ctrl" -> "transceiver_ctrl"
  usb: typec: ucsi_ccg: Disable UCSI ALT support on Tegra
  usb: typec: Replace custom implementation of device_match_fwnode()
  usb: typec: ucsi: Don't warn on probe deferral
  usb: add quirks for Lenovo OneLink+ Dock
  MAINTAINERS: switch dwc3 to Thinh
  usb: idmouse: fix an uninit-value in idmouse_open
  USB: PHY: JZ4770: Switch to use dev_err_probe() helper
  usb: phy: generic: Switch to use dev_err_probe() helper
  usb: ulpi: use DEFINE_SHOW_ATTRIBUTE to simplify ulpi_regs
  usb: cdns3: remove dead code
  usb: cdc-wdm: Use skb_put_data() instead of skb_put/memcpy pair
  usb: musb: sunxi: Switch to use dev_err_probe() helper
  ...

Pull tty/serial driver updates from Greg KH:
 "Here is the big set of TTY and Serial driver updates for 6.1-rc1.

  Lots of cleanups in here, no real new functionality this time around,
  with the diffstat being that we removed more lines than we added!

  Included in here are:

   - termios unification cleanups from Al Viro, it's nice to finally get
     this work done

   - tty serial transmit cleanups in various drivers in preparation for
     more cleanup and unification in future releases (that work was not
     ready for this release)

   - n_gsm fixes and updates

   - ktermios cleanups and code reductions

   - dt bindings json conversions and updates for new devices

   - some serial driver updates for new devices

   - lots of other tiny cleanups and janitorial stuff. Full details in
     the shortlog.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (102 commits)
  serial: cpm_uart: Don't request IRQ too early for console port
  tty: serial: do unlock on a common path in altera_jtaguart_console_putc()
  tty: serial: unify TX space reads under altera_jtaguart_tx_space()
  tty: serial: use FIELD_GET() in lqasc_tx_ready()
  tty: serial: extend lqasc_tx_ready() to lqasc_console_putchar()
  tty: serial: allow pxa.c to be COMPILE_TESTed
  serial: stm32: Fix unused-variable warning
  tty: serial: atmel: Add COMMON_CLK dependency to SERIAL_ATMEL
  serial: 8250: Fix restoring termios speed after suspend
  serial: Deassert Transmit Enable on probe in driver-specific way
  serial: 8250_dma: Convert to use uart_xmit_advance()
  serial: 8250_omap: Convert to use uart_xmit_advance()
  MAINTAINERS: Solve warning regarding inexistent atmel-usart binding
  serial: stm32: Deassert Transmit Enable on ->rs485_config()
  serial: ar933x: Deassert Transmit Enable on ->rs485_config()
  tty: serial: atmel: Use FIELD_PREP/FIELD_GET
  tty: serial: atmel: Make the driver aware of the existence of GCLK
  tty: serial: atmel: Only divide Clock Divisor if the IP is USART
  tty: serial: atmel: Separate mode clearing between UART and USART
  dt-bindings: serial: atmel,at91-usart: Add gclk as a possible USART clock
  ...

Pull soundwire updates from Vinod Koul:
 "Updates for Intel, Cadence and Qualcomm drivers:

   - another round of Intel driver cleanup to prepare for future code
     reorg which is expected in next cycle (Pierre-Louis Bossart)

   - bus unattach notifications processing during re-enumeration along
     with Cadence driver updates for this (Richard Fitzgerald)

   - Qualcomm driver updates to handle device0 status (Srinivas
     Kandagatla)"

* tag 'soundwire-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (42 commits)
  soundwire: intel: add helper to stop bus
  soundwire: intel: introduce helpers to start bus
  soundwire: intel: introduce intel_shim_check_wake() helper
  soundwire: intel: simplify read ops assignment
  soundwire: intel: remove intel_init() wrapper
  soundwire: intel: move shim initialization before power up/down
  soundwire: intel: remove clock_stop parameter in intel_shim_init()
  soundwire: intel: move all PDI initialization under intel_register_dai()
  soundwire: intel: move DAI registration and debugfs init earlier
  soundwire: intel: simplify flow and use devm_ for DAI registration
  soundwire: intel: fix error handling on dai registration issues
  soundwire: cadence: Simplify error paths in cdns_xfer_msg()
  soundwire: cadence: Fix error check in cdns_xfer_msg()
  soundwire: cadence: Write to correct address for each FIFO chunk
  soundwire: bus: Fix wrong port number in sdw_handle_slave_alerts()
  soundwire: qcom: do not send status of device 0 during alert
  soundwire: qcom: update status from device id 1
  soundwire: cadence: Don't overwrite msg->buf during write commands
  soundwire: bus: Don't exit early if no device IDs were programmed
  soundwire: cadence: Fix lost ATTACHED interrupts when enumerating
  ...

Pull phy updates from Vinod Koul:
 "This contains bunch of new device support and one new Sunplus driver
  along with updates which include another big round of qmp phy
  conversion.

  New support:
   - Qualcomm SC8280XP eDP & DP and USB3 UNI phy (Bjorn Andersson)
   - Rockchip rk3568 inno dsidphy (Chris Morgan)
   - ocelot-serdes phy yaml binding (Colin Foster)
   - Renesas gen2-usb phy yaml binding (Geert Uytterhoeven)
   - RGMII suport in lan966x driver (Horatiu Vultur)
   - Qualcomm SM6375 usb snps-femto-v2 bindings (Konrad Dybcio)
   - Rockchip rk356x csi-dphya (Michael Riesch)
   - Qualcomm sdm670 usb2 bindings (Richard Acayan)
   - Sunplus USB2 PHY (Vincent Shih)

  Updates:
   - Mediatek hdmi, ufs, tphy and xsphy updates to use bitfield helpers
     (Chunfeng Yun)
   - Continued Qualcomm qmp phy driver split and cleanup. More patches
     are under review and expected that next cycle might see completion
     of this activity (Dmitry Baryshkov & Johan Hovold)
   - TI wiz driver support for j7200 10g (Roger Quadros)
   - Qualcomm femto phy driver support for override params to help with
     tuning (Sandeep Maheswaram)
   - SGMII support in TI wiz driver (Siddharth Vadapalli)
   - dev_err_probe simplification (Yuan Can)"

* tag 'phy-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (170 commits)
  phy: phy-mtk-dp: make array driving_params static const
  dt-bindings: phy: qcom,qusb2: document sdm670 compatible
  phy: qcom-qmp-pcie: fix resource mapping for SDM845 QHP PHY
  phy: rockchip-snps-pcie3: only look for rockchip,pipe-grf on rk3588
  phy: tegra: xusb: Enable usb role switch attribute
  phy: mediatek: fix build warning of FIELD_PREP()
  phy: qcom-qmp-usb: Use dev_err_probe() to simplify code
  phy: qcom-qmp-ufs: Use dev_err_probe() to simplify code
  phy: qcom-qmp-pcie-msm8996: Use dev_err_probe() to simplify code
  phy: qcom-qmp-combo: Use dev_err_probe() to simplify code
  phy: qualcomm: call clk_disable_unprepare in the error handling
  phy: intel: Use dev_err_probe() to simplify code
  phy: tegra: xusb: Use dev_err_probe() to simplify code
  phy: qcom-snps: Use dev_err_probe() to simplify code
  phy: qcom-qusb2: Use dev_err_probe() to simplify code
  phy: qcom-qmp-pcie: Use dev_err_probe() to simplify code
  phy: ti: phy-j721e-wiz: fix reference leaks in wiz_probe()
  phy: mediatek: mipi: remove register access helpers
  phy: mediatek: mipi: mt8183: use common helper to access registers
  phy: mediatek: mipi: mt8183: use GENMASK to generate bits mask
  ...

Pull dmaengine updates from Vinod Koul:
 "New Support:

   - MT6795 SoC dma controller (AngeloGioacchino Del Regno)

   - qcom-adm controller yaml binding (Christian Marangi)

   - Renesas r8a779g0 dma controller yaml binding (Geert Uytterhoeven)

   - Qualcomm SM6350 GPI dma controller (Luca Weiss)

  Updates:

   - STM32 DMA-MDMA chaining support (Amelie Delaunay)

   - make hsu driver use managed resources (Andy Shevchenko)

   - the usual round of idxd driver updates (Dave Jiang & Jerry
     Snitselaar)

   - apple dma driver iommu and pd properties and remove use
     of devres for irqs (Janne Grunau & Martin Povišer)

   - device_synchronize support for Xilinx zynqmp driver (Swati
     Agarwal)"

* tag 'dmaengine-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (60 commits)
  dmaengine: ioat: remove unused declarations in dma.h
  dmaengine: ti: k3-udma: Respond TX done if DMA_PREP_INTERRUPT is not requested
  dmaengine: zynqmp_dma: Add device_synchronize support
  dt-bindings: dma: add additional pbus reset to qcom,adm
  dt-bindings: dma: rework qcom,adm Documentation to yaml schema
  dt-bindings: dma: apple,admac: Add iommus and power-domains properties
  dmaengine: dw-edma: Remove runtime PM support
  dmaengine: idxd: add configuration for concurrent batch descriptor processing
  dmaengine: idxd: add configuration for concurrent work descriptor processing
  dmaengine: idxd: add WQ operation cap restriction support
  dmanegine: idxd: reformat opcap output to match bitmap_parse() input
  dmaengine: idxd: convert ats_dis to a wq flag
  dmaengine: ioat: stop mod_timer from resurrecting deleted timer in __cleanup()
  dmaengine: qcom-adm: fix wrong calling convention for prep_slave_sg
  dmaengine: qcom-adm: fix wrong sizeof config in slave_config
  dmaengine: ti: k3-psil: add additional TX threads for j721e
  dmaengine: ti: k3-psil: add additional TX threads for j7200
  dmaengine: apple-admac: Trigger shared reset
  dmaengine: apple-admac: Do not use devres for IRQs
  dmaengine: ti: edma: Remove some unused functions
  ...

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (qla2xxx, lpfc, ufs, hisi_sas, mpi3mr,
  mpt3sas, target). The biggest change (from my biased viewpoint) being
  that the mpi3mr now attached to the SAS transport class, making it the
  first fusion type device to do so.

  Beyond the usual bug fixing and security class reworks, there aren't a
  huge number of core changes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (141 commits)
  scsi: iscsi: iscsi_tcp: Fix null-ptr-deref while calling getpeername()
  scsi: mpi3mr: Remove unnecessary cast
  scsi: stex: Properly zero out the passthrough command structure
  scsi: mpi3mr: Update driver version to 8.2.0.3.0
  scsi: mpi3mr: Fix scheduling while atomic type bug
  scsi: mpi3mr: Scan the devices during resume time
  scsi: mpi3mr: Free enclosure objects during driver unload
  scsi: mpi3mr: Handle 0xF003 Fault Code
  scsi: mpi3mr: Graceful handling of surprise removal of PCIe HBA
  scsi: mpi3mr: Schedule IRQ kthreads only on non-RT kernels
  scsi: mpi3mr: Support new power management framework
  scsi: mpi3mr: Update mpi3 header files
  scsi: mpt3sas: Revert "scsi: mpt3sas: Fix ioc->base_readl() use"
  scsi: mpt3sas: Revert "scsi: mpt3sas: Fix writel() use"
  scsi: wd33c93: Remove dead code related to the long-gone config WD33C93_PIO
  scsi: core: Add I/O timeout count for SCSI device
  scsi: qedf: Populate sysfs attributes for vport
  scsi: pm8001: Replace one-element array with flexible-array member
  scsi: 3w-xxxx: Replace one-element array with flexible-array member
  scsi: hptiop: Replace one-element array with flexible-array member in struct hpt_iop_request_ioctl_command()
  ...

Pull rdma updates from Jason Gunthorpe:
 "Not a big list of changes this cycle, mostly small things. The new
  MANA rdma driver should come next cycle along with a bunch of work on
  rxe.

  Summary:

   - Small bug fixes in mlx5, efa, rxe, hns, irdma, erdma, siw

   - rts tracing improvements

   - Code improvements: strlscpy conversion, unused parameter, spelling
     mistakes, unused variables, flex arrays

   - restrack device details report for hns

   - Simplify struct device initialization in SRP

   - Eliminate the never-used service_mask support in IB CM

   - Make rxe not print to the console for some kinds of network packets

   - Asymetric paths and router support in the CM through netlink
     messages

   - DMABUF importer support for mlx5devx umem's"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (84 commits)
  RDMA/rxe: Remove error/warning messages from packet receiver path
  RDMA/usnic: fix set-but-not-unused variable 'flags' warning
  IB/hfi1: Use skb_put_data() instead of skb_put/memcpy pair
  RDMA/hns: Unified Log Printing Style
  RDMA/hns: Replacing magic number with macros in apply_func_caps()
  RDMA/hns: Repacing 'dseg_len' by macros in fill_ext_sge_inl_data()
  RDMA/hns: Remove redundant 'max_srq_desc_sz' in caps
  RDMA/hns: Remove redundant 'num_mtt_segs' and 'max_extend_sg'
  RDMA/hns: Remove redundant 'phy_addr' in hns_roce_hem_list_find_mtt()
  RDMA/hns: Remove redundant 'use_lowmem' argument from hns_roce_init_hem_table()
  RDMA/hns: Remove redundant 'bt_level' for hem_list_alloc_item()
  RDMA/hns: Remove redundant 'attr_mask' in modify_qp_init_to_init()
  RDMA/hns: Remove unnecessary brackets when getting point
  RDMA/hns: Remove unnecessary braces for single statement blocks
  RDMA/hns: Cleanup for a spelling error of Asynchronous
  IB/rdmavt: Add __init/__exit annotations to module init/exit funcs
  RDMA/rxe: Remove redundant num_sge fields
  RDMA/mlx5: Enable ATS support for MRs and umems
  RDMA/mlx5: Add support for dmabuf to devx umem
  RDMA/core: Add UVERBS_ATTR_RAW_FD
  ...

Pull MTD updates from Miquel Raynal:
 "Core MTD changes:
   - mtdchar: add MEMREAD ioctl
   - Add ECC error accounting for each read request
   - always initialize 'stats' in struct mtd_oob_ops
   - Track maximum number of bitflips for each read request
   - Fix repeated word in comment
   - Move from strlcpy with unused retval to strscpy
   - Fix a typo in a comment
   - Add binding for U-Boot bootloader partitions

  MTD device drivers changes:
   - FTL: use container_of() rather than cast
   - docg3:
      - Use correct function names in comment blocks
      - Check the return value of devm_ioremap() in the probe
   - physmap-core: Fix NULL pointer dereferencing in
     of_select_probe_type()
   - parsers: add Broadcom's U-Boot parser

  Raw NAND core changes:
   - Replace of_gpio_named_count() by gpiod_count()
   - Remove misguided comment of nand_get_device()
   - bbt: Use the bitmap API to allocate bitmaps

  Raw NAND controller drivers changes:
   - Meson:
      - Stop supporting legacy clocks
      - Refine resource getting in probe
      - Convert bindings to yaml
      - Fix clock handling and update the bindings accordingly
      - Fix bit map use in meson_nfc_ecc_correct()
   - bcm47xx:
      - Fix spelling typo in comment
   - STM32 FMC2:
      - Switch to using devm_fwnode_gpiod_get()
      - Fix dma_map_sg error check
   - Cadence:
      - Remove an unneeded result variable
   - Marvell:
      - Fix error handle regarding dma_map_sg
   - Orion:
      - Use devm_clk_get_optional()
   - Cafe:
      - Use correct function name in comment block
   - Atmel:
      - Unmap streaming DMA mappings
   - Arasan:
      - Stop using 0 as NULL pointer
   - GPMI:
      - Fix typo 'the the' in comment
   - BRCM:
      - Add individual glue driver selection
      - Move Kconfig to driver folder
   - FSL: Fix none ECC mode
   - Intel:
      - Use devm_platform_ioremap_resource_byname()
      - Remove unused clk_rate member from struct ebu_nand
      - Remove unused nand_pa member from ebu_nand_cs
      - Don't re-define NAND_DATA_IFACE_CHECK_ONLY
      - Remove undocumented compatible string
      - Fix compatible string in the bindings
      - Read the chip-select line from the correct OF node
      - Fix maximum chip select value in the bindings"

* tag 'mtd/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (43 commits)
  mtd: rawnand: meson: stop supporting legacy clocks
  dt-bindings: nand: meson: convert txt to yaml
  mtd: rawnand: meson: refine resource getting in probe
  mtd: rawnand: meson: fix the clock
  dt-bindings: nand: meson: fix meson nfc clock
  mtd: rawnand: bcm47xx: fix spelling typo in comment
  mtd: rawnand: stm32_fmc2: switch to using devm_fwnode_gpiod_get()
  mtd: rawnand: cadence: Remove an unneeded result variable
  mtd: rawnand: Replace of_gpio_named_count() by gpiod_count()
  mtd: rawnand: marvell: Fix error handle regarding dma_map_sg
  mtd: rawnand: stm32_fmc2: Fix dma_map_sg error check
  mtd: rawnand: remove misguided comment of nand_get_device()
  mtd: rawnand: orion: Use devm_clk_get_optional()
  mtd: rawnand: cafe: Use correct function name in comment block
  mtd: rawnand: atmel: Unmap streaming DMA mappings
  mtd: rawnand: meson: fix bit map use in meson_nfc_ecc_correct()
  mtd: rawnand: arasan: stop using 0 as NULL pointer
  mtd: rawnand: gpmi: Fix typo 'the the' in comment
  mtd: rawnand: brcmnand: Add individual glue driver selection
  mtd: rawnand: brcmnand: Move Kconfig to driver folder
  ...

Pull remoteproc updates from Bjorn Andersson:
 "Support for remoteprocs that will perform recovery without help from
  Linux is introduced.

  The virtio integration is transitioned towards remoteproc_virtio.c and
  represented by a platform_device, in preparation for instantiating
  virtio instances from DeviceTree.

  The iMX remoteproc driver has a couple of sparse warnings corrected
  and a couple of error message printouts are cleaned up. The keystone
  driver is transitioned to use the gpiod API"

* tag 'rproc-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  remoteproc: virtio: Fix warning on bindings by removing the of_match_table
  remoteproc: Support attach recovery after rproc crash
  remoteproc: Introduce rproc features
  remoteproc: virtio: Create platform device for the remoteproc_virtio
  remoteproc: Move rproc_vdev management to remoteproc_virtio.c
  remoteproc: core: Introduce rproc_add_rvdev function
  remoteproc: core: Introduce rproc_rvdev_add_device function
  remoteproc: Harden rproc_handle_vdev() against integer overflow
  remoteproc/keystone: Switch to using gpiod API
  drivers/remoteproc: Fix repeated words in comments
  remoteproc: imx_dsp_rproc: fix argument 2 of rproc_mem_entry_init
  remoteproc: imx_rproc: Simplify some error message

Pull rpmsg updates from Bjorn Andersson:
 "This fixes a double free/destroy and drops an unnecessary local
  variable in the rpmsg char driver"

* tag 'rpmsg-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
  rpmsg: char: Avoid double destroy of default endpoint
  rpmsg: char: Remove the unneeded result variable

Pull power supply and reset updates from Sebastian Reichel:

 - new maintenance charging documentation

 - mt6370: new charger driver

 - bq25890: support input current limit

 - added Qualcomm PMK8350 PON support

 - misc minor fixes

* tag 'for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (22 commits)
  power: supply: ab8500: remove unused static local variable
  power: supply: mt6370: Fix return value check in mt6370_chg_probe()
  power: supply: ab8500: Remove unused struct ab8500_chargalg_sysfs_entry
  power: supply: mt6370: uses IIO interfaces, depends on IIO
  power: supply: max1721x: Fix spelling mistake "Gauage" -> "Gauge"
  power: supply: mt6370: Add MediaTek MT6370 charger driver
  dt-bindings: power: supply: Add MediaTek MT6370 Charger
  lib: add linear range index macro
  power: supply: bq25890: Fix enum conversion in bq25890_power_supply_set_property()
  power: supply: bq27xxx: fix NULL vs 0 warnings
  power: supply: bq27xxx: fix __be16 warnings
  power: supply: bq25890: Add support for setting IINLIM
  power: supply: bq25890: Disable PUMPX_EN on errors
  power: supply: Fix repeated word in comments
  power: supply: adp5061: show unknown capacity_level as text
  power: supply: adp5061: fix out-of-bounds read in adp5061_get_chg_type()
  power: supply: tps65217: Fix comments typo
  power: reset: qcom-pon: add support for qcom,pmk8350-pon compatible string
  dt-bindings: power: reset: qcom-pon: Add new compatible "qcom,pmk8350-pon"
  power: supply: cw2015: Use device managed API to simplify the code
  ...

Pull HSI updates from Sebastian Reichel:

 - completely switch to gpiod API

 - misc small fixes

* tag 'hsi-for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: nokia-modem: Replace of_gpio_count() by gpiod_count()
  HSI: ssi_protocol: fix potential resource leak in ssip_pn_open()
  HSI: omap_ssi_port: Fix dma_map_sg error check
  HSI: cmt_speech: Pass a pointer to virt_to_page()
  HSI: omap_ssi: Fix refcount leak in ssi_probe
  HSI: clients: remove duplicate assignment

Merge tag 'pwm/for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm

Pull pwm updates from Thierry Reding:
 "The Rockchip and Mediatek drivers gain support for more chips and the
  LPSS driver undergoes some refactoring and receives some improvements.

  Other than that there are various cleanups of the core"

* tag 'pwm/for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
  pwm: sysfs: Replace sprintf() with sysfs_emit()
  pwm: core: Replace custom implementation of device_match_fwnode()
  pwm: lpss: Add a comment to the bypass field
  pwm: lpss: Make use of bits.h macros for all masks
  pwm: lpss: Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr() macros
  pwm: lpss: Use device_get_match_data() to get device data
  pwm: lpss: Move resource mapping to the glue drivers
  pwm: lpss: Move exported symbols to PWM_LPSS namespace
  pwm: lpss: Deduplicate board info data structures
  dt-bindings: pwm: Add compatible for Mediatek MT8188
  dt-bindings: pwm: rockchip: Add rockchip,rk3128-pwm
  dt-bindings: pwm: rockchip: Add description for rk3588
  pwm: sysfs: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
  pwm: rockchip: Convert to use dev_err_probe()

Pull MFD updates from Lee Jones:
 "Core Frameworks:
   - Fix 'mfd_of_node_list' OF node entry resource leak

  New Drivers:
   - Add support for Ocelot VSC7512 Networking Chip
   - Add support for MediaTek MT6370 subPMIC
   - Add support for Richtek RT5120 (I2C) PMIC

  New Device Support:
   - Add support for Rockchip RV1126 and RK3588 to Syscon
   - Add support for Rockchip RK817 Battery Charger to RK808
   - Add support for Silergy SY7636a Voltage Regulator to Simple MFD
   - Add support for Qualcomm PMP8074 PMIC to QCOM SPMI
   - Add support for Secure Update to Intel M10 BMC

  New Functionality:
   - Provide SSP type to Intel's LPSS (PCI) SPI driver

  Fix-ups:
   - Remove legacy / unused code; stmpe, intel_soc_pmic_crc, syscon
   - Unify / simplify; intel_soc_pmic_crc
   - Trivial reordering / spelling, etc; Makefile, twl-core
   - Convert to managed resources; intel_soc_pmic_crc
   - Use appropriate APIs; intel_soc_pmic_crc
   - strscpy() conversion; htc-i2cpld, lpc_ich, mfd-core
   - GPIOD conversion; htc-i2cpld, stmpe
   - Add missing header file includes; twl4030-irq
   - DT goodies; stmpe, mediatek,mt6370, x-powers,axp152,
     aspeed,ast2x00-scu, mediatek,mt8195-scpsys, qcom,spmi-pmic, syscon,
     qcom,tcsr, rockchip,rk817, sprd,ums512-glbreg, dlg,da9063

  Bug Fixes:
   - Properly check return values; sm501, htc-i2cpld
   - Repair Two-Wire Bus Mode; da9062-core
   - Fix error handling; intel_soc_pmic_core, fsl-imx25-tsadc, lp8788,
     lp8788-irq"

* tag 'mfd-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (60 commits)
  mfd: syscon: Remove repetition of the regmap_get_val_endian()
  mfd: ocelot-spi: Add missing MODULE_DEVICE_TABLE
  power: supply: Add charger driver for Rockchip RK817
  dt-bindings: mfd: mt6370: Fix the indentation in the example
  mfd: da9061: Fix Failed to set Two-Wire Bus Mode.
  mfd: htc-i2cpld: Fix an IS_ERR() vs NULL bug in htcpld_core_probe()
  dt-bindings: mfd: qcom,tcsr: Drop simple-mfd from IPQ6018
  mfd: sm501: Add check for platform_driver_register()
  dt-bindings: mfd: mediatek: Add scpsys compatible for mt8186
  mfd: twl4030: Add missed linux/device.h header
  dt-bindings: mfd: dlg,da9063: Add missing regulator patterns
  dt-bindings: mfd: sprd: Add bindings for ums512 global registers
  mfd: intel_soc_pmic_chtdc_ti: Switch from __maybe_unused to pm_sleep_ptr() etc
  dt-bindings: mfd: syscon: Add rk3588 QoS register compatible
  mfd: stmpe: Switch to using gpiod API
  mfd: qcom-spmi-pmic: Add pm7250b compatible
  dt-bindings: mfd: Add missing (unevaluated|additional)Properties on child nodes
  mfd/omap1: htc-i2cpld: Convert to a pure GPIO driver
  mfd: intel-m10-bmc: Add d5005 bmc secure update driver
  dt-bindings: mfd: syscon: Drop ref from reg-io-width
  ...