Add support for NVRAM on GE Fanuc's PPC9A.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Add support for NVRAM on GE Fanuc's SBC310.
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch enables the NVRAM found on the GE Fanuc SBC610
Signed-off-by: NMartyn Welch <martyn.welch@gefanuc.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Re-write the code so its more standalone and fixed some issues:
* Bump'd # of CAM entries to 64 to support e500mc
* Make the code handle MAS7 properly
* Use pr_cont instead of creating a string as we go
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Introduce new FSL_SOC_BOOKE Kconfig to handle both 85xx and QorIQ
based chips.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Export is needed for modular builds, and a static inline stub is needed
for non-MPC83xx builds.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Simply add power management controller nodes and sleep properties.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch adds needed nodes and properties to support suspend/resume
on the MPC8610HPCD boards.

There is a dedicated switch (SW9) that is used to wake up the boards.
By default the SW9 button is routed to IRQ8, but could be re-routed
(via PIXIS) to sreset.

With 'no_console_suspend' kernel command line argument specified, the
board is also able to wakeup upon serial port input.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: Scott Wood <scottwood@freescale.com> [dts]
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

- Add power management controller nodes;
- Add interrupts for RTC nodes, the RTC interrupt may be used as a
  wakeup source;
- Add sleep properties (DEVDISR bit mask) and sleep-nexus nodes.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch adds suspend/resume support for MPC8540 and MPC8641D-
compatible CPUs. To reach sleep state, we just write the SLP bit
into the PM control and status register.

So far we don't support Deep Sleep mode as found in newer MPC85xx
CPUs (i.e. MPC8536). It can be relatively easy implemented though,
and for it we reserve 'mem' suspend type.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

So far the driver is used to reset QE upon resume, which is needed on
85xx. Later we can move some QE initialization steps into probe().
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch adds QE buffer descriptors mode support for the
spi_mpc8xxx driver, and as a side effect we now support CPM1
and CPM2 SPI controllers.

That means that today we support almost all MPC SPI controllers:

- MPC834x-style controllers (support PIO mode only);
- CPM1 and CPM2 controllers (support DMA mode only);
- QE SPI controllers in CPU mode (PIO mode with shift quirks);
- QE SPI controllers in buffer descriptors (DMA) mode;

The only controller we don't currently support is a newer eSPI
(with a dedicated chip selects and a bit different registers map).
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Soon there will be more flags introduced in subsequent patches, so
let's turn qe_mode into flags.

Also introduce mpc8xxx_spi_strmode() and print current SPI mode.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

We'll add more steps soon, so get rid of the duplication.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch fixes the following warning:

CC      drivers/spi/spi_mpc8xxx.o
  spi_mpc8xxx.c: In function 'of_mpc8xxx_spi_probe':
  spi_mpc8xxx.c:681: warning: 'ret' may be used uninitialized in this function
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This is needed to avoid ugly #ifdefs in drivers. Also update fsl_qe_udc
driver so that now it doesn't define its own versions that cause build
breakage when the generic stubs are used.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: NGreg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The bits are generic to CPM devices, so let's move them to the
common header file, so drivers won't need to privately reintroduce
another bunch of the same bits (as we can't include cpm2.h header
together with cpm1.h).
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

struct mcc defined in both immap_qe.h and immap_cpm2.h, so they will
conflic when included in a single file. The mcc struct is easy to deal
with, since it isn't used in any driver (yet), so let's just rename QE
version to qe_mcc.

The ucb_ctlr is a bit trickier, since it is used by fsl_qe_udc driver,
and the driver supports both CPM and QE UDCs, plus the QE version is
used to form a bigger immap struct.

I don't want to touch too much of USB code in this series, so for now
let's just copy most generic version into the common cpm.h header,
later we'll create cpm_usb.h where we'll place common USB structs that
are used by QE/CPM UDC and QE Host drivers (FHCI).

And as for the structs in qe.h and cpm2.h, just prefix them with qe_
and cpm_.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

When cpm2.h included into spi_mpc8xxx driver, the SPI defines
in the header conflict with defines in the driver.

We don't need them in the header file, so remove them. Plus
remove "struct spi", we'll use a better version in the driver.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

P1020 is another member of Freescale QorIQ series of processors.
It is an e500 based dual core SOC.
Being a scaled down version of P2020 it has following differences from P2020:
- 533MHz - 800MHz core frequency.
- 256Kbyte L2 cache
- Ethernet controllers with classification capabilities(new controller).

From board perspective P1020RDB is same as P2020RDB.
Signed-off-by: NPoonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

It appears that QE shuts down on all MPC85xx CPUs (i.e. MPC8568 and
MPC8569) and thus needs reset upon resume.

So modify qe_alive_during_sleep() to account that.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

For MPC8569 CPUs we'll need to reset QE after each suspend, so make
qe_reset() code path suitable for repeated invocation, that is:

- Don't initialize rheap structures if already initialized;
- Don't allocate muram for SDMA if already allocated, just reinitialize
  registers with previously allocated muram offset;
- Remove __init attributes from qe_reset() and cpm_muram_init();
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch creates the dts files for each core and splits the devices
between the two cores for P2020RDB.

core0 has memory, L2, i2c, spi, dma1, usb, eth0, eth1, crypto,
		global-util, pci0,
core1 has L2, dma2, eth0, pci1, msi.

MPIC is shared between two cores but each core will protect its
interrupts from other core by using "protected-sources" of mpic.
Signed-off-by: NPoonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This is needed to avoid #ifdefs in MPC85xx suspend/resume code.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

MPC8569 CPUs have four QE RISCs, so we need to increase MAX_QE_RISC
constant, otherwise qe_upload_firmware() fails at sanity checking.
Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com>
Acked-by: NTimur Tabi <timur@freescale.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable:
  Btrfs: fix panic when trying to destroy a newly allocated
  Btrfs: allow more metadata chunk preallocation
  Btrfs: fallback on uncompressed io if compressed io fails
  Btrfs: find ideal block group for caching
  Btrfs: avoid null deref in unpin_extent_cache()
  Btrfs: skip btrfs_release_path in btrfs_update_root and btrfs_del_root
  Btrfs: fix some metadata enospc issues
  Btrfs: fix how we set max_size for free space clusters
  Btrfs: cleanup transaction starting and fix journal_info usage
  Btrfs: fix data allocation hint start

Rafael debugged a resume-time hang (with oopses in workqueue handling)
on his laptop that was due to the 'waker' workqueue entry being
disconnected and then released without the workqueue entry having been
synchronized.

Several people were involved, with Oleg Nesterov doing a debugging patch
showing what workqueue entry was corrupt etc.

This was a regression introduced by commit 7bee549e ("Bluetooth: Add
USB autosuspend support to btusb driver") as Rafael points out (not
actually bisected, but it became clear once the bug was found).
Tested-and-reported-by: NRafael J. Wysocki <rjw@sisk.pl>
Acked-by: NOliver Neukum <oliver@neukum.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a problem where iget5_locked will look for an inode, not find it, and
then subsequently try to allocate it.  Another CPU will have raced in and
allocated the inode instead, so when iget5_locked gets the inode spin lock again
and does a search, it finds the new inode.  So it goes ahead and calls
destroy_inode on the inode it just allocated.  The problem is we don't set
BTRFS_I(inode)->root until the new inode is completely initialized.  This patch
makes us set root to NULL when alloc'ing a new inode, so when we get to
btrfs_destroy_inode and we see that root is NULL we can just free up the memory
and continue on.  This fixes the panic

http://www.kerneloops.org/submitresult.php?number=812690

Thanks,
Signed-off-by: NJosef Bacik <josef@redhat.com>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6:
  JBD/JBD2: free j_wbuf if journal init fails.
  ext3: Wait for proper transaction commit on fsync
  ext3: retry failed direct IO allocations

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - possible read past array alc88[02]_parse_auto_config()
  sound: rawmidi: fix MIDI device O_APPEND error handling
  sound: rawmidi: fix checking of O_APPEND when opening MIDI device
  sound: rawmidi: fix double init when opening MIDI device with O_APPEND
  ALSA: hda - Avoid quirk for HP dc5750
  ALSA: hda - Tweak OLPC XO-1.5 microphone bias
  ALSA: hda: Use model=auto quirk for Sony VAIO VGN-FW170J using ALC262

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
  x86/PCI: Adjust GFP mask handling for coherent allocations
  PCI ASPM: fix oops on root port removal

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc:
  powerpc: pasemi_defconfig update
  powerpc: 2.6.32 update of defconfigs for embedded 6xx/7xxx, 8xx, 8{3,5,6}xxx
  powerpc/8xxx: enable IPsec ESP by default on mpc83xx/mpc85xx
  powerpc/83xx: Fix u-boot partion size for MPC8377E-WLAN boards
  powerpc/85xx: Fix USB GPIOs for MPC8569E-MDS boards
  powerpc/82xx: kmalloc failure ignored in ep8248e_mdio_probe()
  powerpc/85xx: sbc8548 - fixup of PCI-e related DTS fields

* master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: Use a definition for the userspace cmpxchg emulation syscall
  [ARM] Fix test for unimplemented ARM syscalls
  ARM: 5784/1: fix early boot machine ID mismatch error display
  [ARM] orion5x: update defconfig
  [ARM] Kirkwood: update defconfig
  [ARM] Kirkwood: clarify PCIe MEM bus/physical address distinction
  [ARM] kirkwood: fix PCI I/O port assignment
  [ARM] kirkwood: fix section mismatch
  [ARM] OpenRD base: Initialize PCI express and i2c
  [ARM] properly report mv78100 stepping A1
  ARM: 5780/1: KS8695: Fix macro definition bug in regs-switch.c
  ARM: 5779/1: ep93xx/micro9.c: fix implicit declaration of function __raw_readl and IOMEM
  RealView: Add sparsemem support for the RealView PBX platform
  RealView: Remove duplicated #define REALVIEW_SYS_FLAGS* statements
  RealView: Add default memory configuration
  Check whether the SCU was already initialised
  ARMv7: Check whether the SMP/nAMP mode was already enabled
  [ARM] pxa: fix resume failure by saving/restoring IPRx registers
  [ARM] pxa/palm: fix incorrect initialization of Palm Tungsten C keyboard
  [ARM] pxa/zaurus: fix NAND flash OOB layout for Borzoi

* 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: (52 commits)
  drm/kms: Init the CRTC info fields for modes forced from the command line.
  drm/radeon/r600: CS parser updates
  drm/radeon/kms: add debugfs for power management for AtomBIOS devices
  drm/radeon/kms: initial mode validation support
  drm/radeon/kms/atom/dce3: call transmitter init on mode set
  drm/radeon/kms: store detailed connector info
  drm/radeon/kms/atom/dce3: fix up usPixelClock calculation for Transmitter tables
  drm/radeon/kms/r600: fix rs880 support v2
  drm/radeon/kms/r700: fix some typos in chip init
  drm/radeon/kms: remove some misleading debugging output
  drm/radeon/kms: stop putting VRAM at 0 in MC space on r600s.
  drm/radeon/kms: disable D1VGA and D2VGA if enabled
  drm/radeon/kms: Don't RMW CP_RB_CNTL
  drm/radeon/kms: fix coherency issues on AGP cards.
  drm/radeon/kms: fix rc410 suspend/resume.
  drm/radeon/kms: add quirk for hp dc5750
  drm/radeon/kms/atom: fix potential oops in spread spectrum code
  drm/kms: typo fix
  drm/radeon/kms/atom: Make card_info per device
  drm/radeon/kms/atom: Fix DVO support
  ...

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  highmem: Fix debug_kmap_atomic() to also handle KM_IRQ_PTE, KM_NMI, and KM_NMI_PTE
  highmem: Fix race in debug_kmap_atomic() which could cause warn_count to underflow
  rcu: Fix long-grace-period race between forcing and initialization
  uids: Prevent tear down race

Merge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: try_one_irq() must be called with irq disabled

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf tools: Fix permission checks
  perf_events: Fix some typo in the perf events config description

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Use root_task_group_empty only with FAIR_GROUP_SCHED
  sched: Fix kernel-doc function parameter name