- 28 10月, 2005 40 次提交
-
-
由 Lennert Buytenhek 提交于
Patch from Lennert Buytenhek We already had a mapping for the msf, but we didn't have any register definitions for it yet. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ian Campbell 提交于
[ARM] 3044/1: Fix sparse warnings about incompatible pointer types for register defined in pxa-regs.h Patch from Ian Campbell The sparse warning initially surfaced in sound/arm/pxa2xx-ac97.c because it was using u32 * variables to hold the unsigned long * register addresses. I submitted an ALSA patch for this http://thread.gmane.org/gmane.linux.alsa.devel/27804 issue and it was suggested that it might be preferable to change the register definitions to use u32. Most other subarches seem to use u32 for their register type, at least the ones which use a __REG macro (like the PXA) do. Nico indicated in the thread above that he wouldn't mind this patch. Changing the type required fixes for opposite warnings in the pxa2xx usb gadget code but that was the only new warning introduced on defconfig or lubbock, mainstone and our own PXA255 boards. Signed-off-by: NIan Campbell <icampbell@arcom.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks From: Guillaume GOURAT <guillaume.gourat@nexvision.fr> A number of devices have an extra byte on the end of their areas due to mis-calculating the .end field of their resources Signed-off-by: NGuillaume GOURAT <guillaume.gourat@nexvision.fr> Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ben Dooks 提交于
Patch from Ben Dooks Add generic values for the parameters to the s3c2410_gpio_cfgpin() function, so that a caller does not need to know the exact constant for the specified pin. This is very useful for the case where a driver is passed a gpio pin number and needs to reconfigure the pin's function. Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre Here's an ARM assembly SHA1 implementation to replace the default C version. It is approximately 50% faster than the generic C version. On an XScale processor running at 400MHz: generic C version: 9.8 MB/s my version: 14.5 MB/s This code is useful to quite a few callers in the tree: crypto/sha1.c: sha_transform(sctx->state, sctx->buffer, temp); crypto/sha1.c: sha_transform(sctx->state, &data[i], temp); drivers/char/random.c: sha_transform(buf, (__u8 *)r->pool+i, buf + 5); drivers/char/random.c: sha_transform(buf, (__u8 *)data, buf + 5); net/ipv4/syncookies.c: sha_transform(tmp + 16, (__u8 *)tmp, tmp + 16 + 5); Signed-off-by: NNicolas Pitre <nico@cam.org> Seems to work fine on big-endian as well. Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena This patch adds support for 36-bit static mapped I/O. While there are no platforms in the tree ATM that use it, it has been tested tested on the IXP2350 NPU and I would like to get the support for that chipset upstream one piece at a time. There are also other Intel chipset ports in development that are waiting on this to go upstream. The patch replaces the print formats for physical addresses with %016llx which will create a bit extraneous output on 32-bit systems, but I think that is cleaner than having #ifdefs, specially since users will only see the output in error cases. Depends on 3016/1. Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena Convert map_desc.physical to map_desc.pfn. This allows us to add support for 36-bit addressed physical devices in the static maps without having to resort to u64 variables. Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena Integrator map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena iMX map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena H720x map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena Footbridge map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena EBSA110 map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena EPXA10DB mapd_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena Versatile map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena CLSP7500 map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena CLSP711x map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena SA1100 map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena Shark map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena S3C2410 map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena RiscPC map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena PXA map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena OMAP map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena LH7A40x map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena IXP4xx map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena IXP2000 map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena IOP3xx map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Deepak Saxena 提交于
Patch from Deepak Saxena aaec2000 map_desc.pfn conversion Signed-off-by: NDeepak Saxena <dsaxena@plexity.net> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
There is nothing special about having the init code separate from the common code, so combine the two. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
The common oprofile code assumes the name "PMU" (from Intel's performance management unit). This is misleading when we start adding oprofile support for other machine types which don't use the same terminology. Call it op_arm_* instead of pmu_*. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
The oprofile suspend/resume was missing locking. If we failed to start oprofile on resume, we still reported that it was enabled. Instead, disable oprofile on error. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Make ARM independent of the way bootmem operates internally. We now map each node as we initialise it, and place the bootmem bitmap inside each node, rather than all in the first node. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Fix sparse warnings in arch/arm/kernel/module.c, arch/arm/mm/consistent.c, drivers/pcmcia/sa1111_generic.c, and platform support files. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
EBSA110 only requires hardware.h to be included for a couple of files. Move the include there. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Including asm/hardware.h into asm/io.h can cause #define clashes between platform specific definitions and driver local definitions. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Torvalds 提交于
"Better late than never"
-
由 Linus Torvalds 提交于
-
由 Dave Jones 提交于
Don't try to access not-present CPUs. Conservative governor will always oops on SMP without this fix. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=4781Signed-off-by: NVenkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: NDave Jones <davej@redhat.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-