This adds mcount recording and updates dynamic ftrace for ARM to work
with the new ftrace dyamic tracing implementation.  It also adds support
for the mcount format used by newer ARM compilers.

With dynamic tracing, mcount() is implemented as a nop.  Callsites are
patched on startup with nops, and dynamically patched to call to the
ftrace_caller() routine as needed.

Acked-by: Steven Rostedt <rostedt@goodmis.org> [recordmcount.pl change]
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

On ARM, we have two ABIs, and the ABI used is controlled via a config
option.  Object files built with one ABI can't be merged with object
files built with the other ABI.  So, record_mcount.pl needs to use the
same compiler flags as the kernel when generating the object file with
the mcount locations.  Ensure this by passing CFLAGS to the script.
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Fix the mcount routines to build and run on a kernel built with the
Thumb-2 instruction set by correcting the following errors using the
fixes suggested by Catalin Marinas:

 - Problem: The following assembler errors appear at the "adr r0,
   ftrace_stub" instruction:

   entry-common.S: Assembler messages:
   entry-common.S:179: Error: invalid immediate for address calculation (value = 0x00000004)

   Fix: The errors don't occur with a non-global symbol, so use one.

 - Problem: The "mov lr, pc" does not set the lsb when storing the pc in
   lr.  The called function returns with "bx lr", and the mode changes
   to ARM.

   Fix: Add a label on the return address and use "adr lr, BSYM(label)".

We don't modify the old mcount because it won't be built when using
Thumb-2.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

When building as Thumb-2, the ".type foo, %function" annotation in
ENDPROC seems to be required in order for the assembly routines to be
recognized as Thumb-2 code.  If the ENDPROC annotations are not present,
calls to these routines are generated as BLX instead of BL.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

With a new enough GCC, ARM function tracing can be supported without the
need for frame pointers.  This is essential for Thumb-2 support, since
frame pointers aren't available then.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Acked-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

With current gcc, compiling with both -pg and -fomit-frame-pointer is
not allowed.  However, -pg can be used to build without actually
specifying -fno-omit-frame-pointer, upon which the default behaviour
for the target will be used.

On ARM, it is not possible to build a Thumb-2 kernel with
-fno-omit-frame-pointer (FRAME_POINTERS depends on !THUMB2_KERNEL). In
order to support ftrace for Thumb-2, we need to be able to allow a
combination of FUNCTION_TRACER and !FRAME_POINTER.  We do this by
omitting -fomit-frame-pointer if ftrace is enabled.
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf, x86, Pentium4: Clear the P4_CCCR_FORCE_OVF flag
  tracing/trace_stack: Fix stack trace on ppc64

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  Eliminate sparse warning - bad constant expression
  cifs: check for NULL session password
  missing changes during ntlmv2/ntlmssp auth and sign
  [CIFS] Fix ntlmv2 auth with ntlmssp
  cifs: correction of unicode header files
  cifs: fix NULL pointer dereference in cifs_find_smb_ses
  cifs: consolidate error handling in several functions
  cifs: clean up error handling in cifs_mknod

* 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  MAINTAINERS: hwmon/coretemp: Change maintainers
  hwmon: (k8temp) Differentiate between AM2 and ASB1
  hwmon: (ads7871) Fix ads7871_probe error paths
  hwmon: (coretemp) Fix harmless build warning

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, tsc, sched: Recompute cyc2ns_offset's during resume from sleep states
  sched: Fix rq->clock synchronization when migrating tasks

* 'upstream/core' of git://git.kernel.org/pub/scm/linux/kernel/git/jeremy/xen:
  xen: handle events as edge-triggered
  xen: use percpu interrupts for IPIs and VIRQs

* '2.6.36-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/xfsdev:
  xfs: do not discard page cache data on EAGAIN
  xfs: don't do memory allocation under the CIL context lock
  xfs: Reduce log force overhead for delayed logging
  xfs: dummy transactions should not dirty VFS state
  xfs: ensure f_ffree returned by statfs() is non-negative
  xfs: handle negative wbc->nr_to_write during sync writeback
  writeback: write_cache_pages doesn't terminate at nr_to_write <= 0
  xfs: fix untrusted inode number lookup
  xfs: ensure we mark all inodes in a freed cluster XFS_ISTALE
  xfs: unlock items before allowing the CIL to commit

Huaxu and Rudolf want me to be the hwmon coretemp driver maintainer and
remove their names from the coretemp maintainer entry.
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Acked-by: NRudolf Marek <r.marek@assembler.cz>
Acked-by: NHuaxu Wan <huaxu.wan@intel.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Commit 8bf0223ed515be24de0c671eedaff49e78bebc9c (hwmon, k8temp: Fix
temperature reporting for ASB1 processor revisions) fixed temperature
reporting for ASB1 CPUs. But those CPU models (model 0x6b, 0x6f, 0x7f)
were packaged both as AM2 (desktop) and ASB1 (mobile). Thus the commit
leads to wrong temperature reporting for AM2 CPU parts.

The solution is to determine the package type for models 0x6b, 0x6f,
0x7f.

This is done using BrandId from CPUID Fn8000_0001_EBX[15:0]. See
"Constructing the processor Name String" in "Revision Guide for AMD
NPT Family 0Fh Processors" (Rev. 3.46).

Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: stable@kernel.org [.32.x, .33.x, .34.x, .35.x]
Reported-by: NVladislav Guberinic <neosisani@gmail.com>
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: NJean Delvare <khali@linux-fr.org>

1. remove 'status' variable
2. remove unneeded initialization of 'err' variable
3. return missing error code if sysfs_create_group fail.
4. fix the init sequence as:
   - check hardware existence
   - kzalloc for ads7871_data
   - sysfs_create_group
   - hwmon_device_register
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NJean Delvare <khali@linux-fr.org>

Fix the following build warning:

  CC [M]  drivers/hwmon/coretemp.o
drivers/hwmon/coretemp.c: In function "coretemp_init":
drivers/hwmon/coretemp.c:521: warning: unused variable "n"
drivers/hwmon/coretemp.c:521: warning: unused variable "p"

Introduced by commit 851b29cb. When
you drop code, you also have to drop the variables this code was
using.
Signed-off-by: NJean Delvare <khali@linux-fr.org>
Cc: Chen Gong <gong.chen@linux.intel.com>
Cc: Rudolf Marek <r.marek@assembler.cz>
Cc: Huaxu Wan <huaxu.wan@intel.com>

If on Pentium4 CPUs the FORCE_OVF flag is set then an NMI happens
on every event, which can generate a flood of NMIs. Clear it.
Reported-by: NVince Weaver <vweaver1@eecs.utk.edu>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

save_stack_trace() stores the instruction pointer, not the
function descriptor. On ppc64 the trace stack code currently
dereferences the instruction pointer and shows 8 bytes of
instructions in our backtraces:

 # cat /sys/kernel/debug/tracing/stack_trace
        Depth    Size   Location    (26 entries)
        -----    ----   --------
  0)     5424     112   0x6000000048000004
  1)     5312     160   0x60000000ebad01b0
  2)     5152     160   0x2c23000041c20030
  3)     4992     240   0x600000007c781b79
  4)     4752     160   0xe84100284800000c
  5)     4592     192   0x600000002fa30000
  6)     4400     256   0x7f1800347b7407e0
  7)     4144     208   0xe89f0108f87f0070
  8)     3936     272   0xe84100282fa30000

Since we aren't dealing with function descriptors, use %pS
instead of %pF to fix it:

 # cat /sys/kernel/debug/tracing/stack_trace
        Depth    Size   Location    (26 entries)
        -----    ----   --------
  0)     5424     112   ftrace_call+0x4/0x8
  1)     5312     160   .current_io_context+0x28/0x74
  2)     5152     160   .get_io_context+0x48/0xa0
  3)     4992     240   .cfq_set_request+0x94/0x4c4
  4)     4752     160   .elv_set_request+0x60/0x84
  5)     4592     192   .get_request+0x2d4/0x468
  6)     4400     256   .get_request_wait+0x7c/0x258
  7)     4144     208   .__make_request+0x49c/0x610
  8)     3936     272   .generic_make_request+0x390/0x434
Signed-off-by: NAnton Blanchard <anton@samba.org>
Cc: rostedt@goodmis.org
Cc: fweisbec@gmail.com
LKML-Reference: <20100825013238.GE28360@kryten>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  watchdog: Don't throttle the watchdog
  tracing: Fix timer tracing

Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  mutex: Improve the scalability of optimistic spinning

pa-risc and ia64 have stacks that grow upwards. Check that
they do not run into other mappings. By making VM_GROWSUP
0x0 on architectures that do not ever use it, we can avoid
some unpleasant #ifdefs in check_stack_guard_page().
Signed-off-by: NTony Luck <tony.luck@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When converting this to the new wait_for macro I inverted the wait
condition, which causes all sorts of problems.  So correct it to fix
several failures caused by the bad wait (flickering, bad output
detection, tearing, etc.).
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NSitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Xen events are logically edge triggered, as Xen only calls the event
upcall when an event is newly set, but not continuously as it remains set.
As a result, use handle_edge_irq rather than handle_level_irq.

This has the important side-effect of fixing a long-standing bug of
events getting lost if:
 - an event's interrupt handler is running
 - the event is migrated to a different vcpu
 - the event is re-triggered

The most noticable symptom of these lost events is occasional lockups
of blkfront.

Many thanks to Tom Kopec and Daniel Stodden in tracking this down.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Tom Kopec <tek@acm.org>
Cc: Daniel Stodden <daniel.stodden@citrix.com>
Cc: Stable Kernel <stable@kernel.org>

IPIs and VIRQs are inherently per-cpu event types, so treat them as such:
 - use a specific percpu irq_chip implementation, and
 - handle them with handle_percpu_irq

This makes the path for delivering these interrupts more efficient
(no masking/unmasking, no locks), and it avoid problems with attempts
to migrate them.
Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Cc: Stable Kernel <stable@kernel.org>

Eliminiate sparse warning during usage of crypto_shash_* APIs
       error: bad constant expression

Allocate memory for shash descriptors once, so that we do not kmalloc/kfree it
for every signature generation (shash descriptor for md5 hash).

From ed7538619817777decc44b5660b52268077b74f3 Mon Sep 17 00:00:00 2001
From: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
Date: Tue, 24 Aug 2010 11:47:43 -0500
Subject: [PATCH] eliminate sparse warnings during crypto_shash_* APis usage
Signed-off-by: NShirish Pargaonkar <shirishpargaonkar@gmail.com>
Signed-off-by: NSteve French <sfrench@us.ibm.com>

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] fix tlb flushing vs. concurrent /proc accesses
  [S390] s390: fix build error (sys_execve)

We should pass the data to the data register.
Signed-off-by: NJianwei Yang <jianwei.yang@intel.com>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It looks like there is an off-by-one error in one of your changes to
drivers/staging/rar_register/rar_register.c:
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This build bug triggers:

 drivers/built-in.o: In function `mantis_exit':
 (.text+0x377413): undefined reference to `ir_input_unregister'
 drivers/built-in.o: In function `mantis_input_init':
 (.text+0x3774ff): undefined reference to `__ir_input_register'

If MANTIS_CORE is enabled but IR_CORE is not. Add the correct
dependency.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Acked-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Get rid of indirect p1275 PROM call buffer.
  sparc64: Fill a missing delay slot.
  sparc64: Make lock backoff really a NOP on UP builds.
  sparc64: simple microoptimizations for atomic functions
  sparc64: Make rwsems 64-bit.
  sparc64: Really fix atomic64_t interface types.

The tlb flushing code uses the mm_users field of the mm_struct to
decide if each page table entry needs to be flushed individually with
IPTE or if a global flush for the mm_struct is sufficient after all page
table updates have been done. The comment for mm_users says "How many
users with user space?" but the /proc code increases mm_users after it
found the process structure by pid without creating a new user process.
Which makes mm_users useless for the decision between the two tlb
flusing methods. The current code can be confused to not flush tlb
entries by a concurrent access to /proc files if e.g. a fork is in
progres. The solution for this problem is to make the tlb flushing
logic independent from the mm_users field.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (25 commits)
  powerpc: Fix config dependency problem with MPIC_U3_HT_IRQS
  via-pmu: Add compat_pmu_ioctl
  powerpc: Wire up fanotify_init, fanotify_mark, prlimit64 syscalls
  powerpc/pci: Fix checking for child bridges in PCI code.
  powerpc: Fix typo in uImage target
  powerpc: Initialise paca->kstack before early_setup_secondary
  powerpc: Fix bogus it_blocksize in VIO iommu code
  powerpc: Inline ppc64_runlatch_off
  powerpc: Correct smt_enabled=X boot option for > 2 threads per core
  powerpc: Silence xics_migrate_irqs_away() during cpu offline
  powerpc: Silence __cpu_up() under normal operation
  powerpc: Re-enable preemption before cpu_die()
  powerpc/pci: Drop unnecessary null test
  powerpc/powermac: Drop unnecessary null test
  powerpc/powermac: Drop unnecessary of_node_put
  powerpc/kdump: Stop all other CPUs before running crash handlers
  powerpc/mm: Fix vsid_scrample typo
  powerpc: Use is_32bit_task() helper to test 32 bit binary
  powerpc: Export memstart_addr and kernstart_addr on ppc64
  powerpc: Make rwsem use "long" type
  ...

fix this build error:
arch/s390/kernel/process.c:272: error: conflicting types for 'sys_execve'
arch/s390/kernel/entry.h:45: error: previous declaration of 'sys_execve' was here
make[1]: *** [arch/s390/kernel/process.o] Error 1
make: *** [arch/s390/kernel] Error 2

introduced by d7627467Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6:
  Staging: sep: remove driver
  Staging: batman-adv: Don't write in not allocated packet_buff
  Staging: batman-adv: Don't use net_dev after dev_put
  Staging: batman-adv: Create batman_if only on register event
  Staging: batman-adv: fix own mac address detection
  Staging: batman-adv: always reply batman icmp packets with primary mac
  Staging: batman-adv: fix batman icmp originating from secondary interface
  Staging: batman-adv: unify orig_hash_lock spinlock handling to avoid deadlocks
  Staging: batman-adv: Fix merge of linus tree
  Staging: spectra: removes unused functions
  Staging: spectra: initializa lblk variable
  Staging: spectra: removes unused variable
  Staging: spectra: remove duplicate GLOB_VERSION definition
  Staging: spectra: don't use locked_ioctl, fix build
  Staging: use new REQ_FLUSH flag, fix build breakage
  Staging: spectra: removes q->prepare_flush_fn, fix build breakage

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6:
  68328serial: check return value of copy_*_user() instead of access_ok()
  synclink: add mutex_unlock() on error path
  rocket: add a mutex_unlock()
  ip2: return -EFAULT on copy_to_user errors
  ip2: remove unneeded NULL check
  serial: print early console device address in hex

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  kobject_uevent: fix typo in comments
  firmware_class: fix typo in error path
  kobject: Break the kobject namespace defs into their own header

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (29 commits)
  ARM: imx: fix build failure concerning otg/ulpi
  USB: ftdi_sio: add product ID for Lenz LI-USB
  USB: adutux: fix misuse of return value of copy_to_user()
  USB: iowarrior: fix misuse of return value of copy_to_user()
  USB: xHCI: update ring dequeue pointer when process missed tds
  USB: xhci: Remove buggy assignment in next_trb()
  USB: ftdi_sio: Add ID for Ionics PlugComputer
  USB: serial: io_ti.c: don't return 0 if writing the download record failed
  USB: otg: twl4030: fix wrong assumption of starting state
  USB: gadget: Return -ENOMEM on memory allocation failure
  USB: gadget: fix composite kernel-doc warnings
  USB: ssu100: set tty_flags in ssu100_process_packet
  USB: ssu100: add disconnect function for ssu100
  USB: serial: export symbol usb_serial_generic_disconnect
  USB: ssu100: rework logic for TIOCMIWAIT
  USB: ssu100: add register parameter to ssu100_setregister
  USB: ssu100: remove duplicate #defines in ssu100
  USB: ssu100: refine process_packet in ssu100
  USB: ssu100: add locking for port private data in ssu100
  USB: r8a66597-udc: return -ENOMEM if kzalloc() fails
  ...

This is based upon a report by Meelis Roos showing that it's possible
that we'll try to fetch a property that is 32K in size with some
devices.  With the current fixed 3K buffer we use for moving data in
and out of the firmware during PROM calls, that simply won't work.

In fact, it will scramble random kernel data during bootup.

The reasoning behind the temporary buffer is entirely historical.  It
used to be the case that we had problems referencing dynamic kernel
memory (including the stack) early in the boot process before we
explicitly told the firwmare to switch us over to the kernel trap
table.

So what we did was always give the firmware buffers that were locked
into the main kernel image.

But we no longer have problems like that, so get rid of all of this
indirect bounce buffering.

Besides fixing Meelis's bug, this also makes the kernel data about 3K
smaller.

It was also discovered during these conversions that the
implementation of prom_retain() was completely wrong, so that was
fixed here as well.  Currently that interface is not in use.
Reported-by: NMeelis Roos <mroos@linux.ee>
Tested-by: NMeelis Roos <mroos@linux.ee>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

MPIC_U3_HT_IRQS is selected both by PPC_PMAC64 and PPC_MAPLE, but depends
on PPC_MAPLE, so a PPC_PMAC64-only config gets this warning:

warning: (PPC_PMAC64 && PPC_PMAC && POWER4 || PPC_MAPLE && PPC64 && PPC_BOOK3S) selects MPIC_U3_HT_IRQS which has unmet direct dependencies (PPC_MAPLE)

Fix that by removing the dependency on PPC_MAPLE.
Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The ioctls are actually compatible, but due to historical mistake the
numbers differ between 32bit and 64bit.
Signed-off-by: NAndreas Schwab <schwab@linux-m68k.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>