- 01 9月, 2016 11 次提交
-
-
由 David S. Miller 提交于
Sean Wang says: ==================== net: ethernet: mediatek: a couple of fixes a couple of fixes come out from integrating with linux-4.8 rc1 they all are verified and workable on linux-4.8 rc1 Changes since v1: - usage of loops to work out if all required clock are ready instead of tedious coding - remove redundant pinctrl setup that is already done by core driver thanks for careful and patient reviewing by Andrew Lunn - splitting distinct changes into the separate patches - change variable naming from err to ret for readable coding Changes since v2: - restore to original clock disabling sequence that is changed accidentally in the last version - refine the commit log that would cause misunderstanding what has been done in the changes - refine the commit log that would cause footnote losing due to improper delimiter use Changes since v3: - fix git rejects caused by mixing a change from net-next, so remake the patch set based on the current net branch again. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
Return -ENODEV if the MDIO bus is disabled in the device tree. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Acked-by: NJohn Crispin <john@phrozen.org> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
a lot of parts in the driver uses devm_* APIs to gain benefits from the device resource management, so devm_mdiobus_alloc is also used instead of mdiobus_alloc to have more elegant code flow. Using common code provided by the devm_* helps to 1) have simplified the code flow as [1] says 2) decrease the risk of incorrect error handling by human 3) only a few drivers used it since it was proposed on linux 3.16, so just hope to promote for this. Ref: [1] https://patchwork.ozlabs.org/patch/344093/Signed-off-by: NSean Wang <sean.wang@mediatek.com> Reviewed-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
This patch adds the missing of_node_put() after finishing the usage of of_get_child_by_name. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Acked-by: NJohn Crispin <john@phrozen.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
mtk_stop() must be called to stop for freeing DMA resources acquired and restoring state changed by mtk_open() firstly when module removal. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
original mdio_cleanup is not in the symmetric place against where mdio_init is, so relocate mdio_cleanup to the right one. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Acked-by: NJohn Crispin <john@phrozen.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
these irqs are not used for shared irq and disabled during ethernet stops. irq requested by devm_request_irq is safe to be freed automatically on driver detach. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Acked-by: NJohn Crispin <john@phrozen.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
use skb_free_frag() instead of legacy put_page() Signed-off-by: NSean Wang <sean.wang@mediatek.com> Acked-by: NJohn Crispin <john@phrozen.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
1) If the return value of devm_clk_get is EPROBE_DEFER, we should defer probing the driver. The change is verified and works based on 4.8-rc1 staying with the latest clk-next code for MT7623. 2) Changing with the usage of loops to work out if all clocks required are fine Signed-off-by: NSean Wang <sean.wang@mediatek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sean Wang 提交于
which net device the SKB is complete for depends on the forward port on txd4 on the corresponding TX descriptor, but the information isn't set up well in case of SKB fragments that would lead to watchdog timeout from the upper layer, so fix it up. Signed-off-by: NSean Wang <sean.wang@mediatek.com> Acked-by: NJohn Crispin <john@phrozen.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Davide Caratti 提交于
commit bc8c20ac ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") seems to have accidentally reverted commit 47cc84ce ("bridge: fix parsing of MLDv2 reports"). This commit brings back a change to br_ip6_multicast_mld2_report() where parsing of MLDv2 reports stops when the first group is successfully added to the MDB cache. Fixes: bc8c20ac ("bridge: multicast: treat igmpv3 report with INCLUDE and no sources as a leave") Signed-off-by: NDavide Caratti <dcaratti@redhat.com> Acked-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: NThadeu Lima de Souza Cascardo <cascardo@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 8月, 2016 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf由 David S. Miller 提交于
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for your net tree, they are: 1) Allow nf_tables reject expression from input, forward and output hooks, since only there the routing information is available, otherwise we crash. 2) Fix unsafe list iteration when flushing timeout and accouting objects. 3) Fix refcount leak on timeout policy parsing failure. 4) Unlink timeout object for unconfirmed conntracks too 5) Missing validation of pkttype mangling from bridge family. 6) Fix refcount leak on ebtables on second lookup for the specific bridge match extension, this patch from Sabrina Dubroca. 7) Remove unnecessary ip_hdr() in nf_tables_netdev family. Patches from 1-5 and 7 from Liping Zhang. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Merge tag 'mac80211-for-davem-2016-08-30' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Three little fixes: * revert a recent wext patch, which Ben Hutchings noticed was wrong, and it turns out not to be necessary for any driver * fix an infinite loop that can occur under certain conditions in mac80211's TDLS code (depending on regulatory information) * add a cfg80211_get_station() static inline when cfg80211 isn't built, to allow other modules to not have to depend on it for it ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 8月, 2016 8 次提交
-
-
由 Liping Zhang 提交于
We have already use skb_header_pointer to get the ip header pointer, so there's no need to use ip_hdr again. Moreover, in NETDEV INGRESS hook, ip header maybe not linear, so use ip_hdr is not appropriate, remove it. Signed-off-by: NLiping Zhang <liping.zhang@spreadtrum.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Linus Lüssing 提交于
This allows modules using this function (currently: batman-adv) to compile even if cfg80211 is not built at all, thus relaxing dependencies. Signed-off-by: NLinus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Arik Nemtsov 提交于
Stop downgrading TDLS chandef when reaching the AP BW. The AP provides the necessary regulatory protection in this case. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=153961, which reported an infinite loop here. Reported-by: NKamil Toman <kamil.toman@gmail.com> Signed-off-by: NArik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
由 Linus Torvalds 提交于
Merge tag 'hwmon-for-linus-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull hwmon fix from Guenter Roeck: "Add missing sysfs attribute group terminator to it87 driver" * tag 'hwmon-for-linus-v4.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: hwmon: (it87) Add missing sysfs attribute group terminator
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4由 Linus Torvalds 提交于
Pull ext4 fixes from Ted Ts'o: "Fix bugs that could cause kernel deadlocks or file system corruption while moving xattrs to expand the extended inode. Also add some sanity checks to the block group descriptors to make sure we don't end up overwriting the superblock" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: avoid deadlock when expanding inode size ext4: properly align shifted xattrs when expanding inodes ext4: fix xattr shifting when expanding inodes part 2 ext4: fix xattr shifting when expanding inodes ext4: validate that metadata blocks do not overlap superblock ext4: reserve xattr index for the Hurd
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) Segregate namespaces properly in conntrack dumps, from Liping Zhang. 2) tcp listener refcount fix in netfilter tproxy, from Eric Dumazet. 3) Fix timeouts in qed driver due to xmit_more, from Yuval Mintz. 4) Fix use-after-free in tcp_xmit_retransmit_queue(). 5) Userspace header fixups (use of __u32, missing includes, etc.) from Mikko Rapeli. 6) Further refinements to fragmentation wrt gso and tunnels, from Shmulik Ladkani. 7) Trigger poll correctly for zero length UDP packets, from Eric Dumazet. 8) TCP window scaling fix, also from Eric Dumazet. 9) SLAB_DESTROY_BY_RCU is not relevant any more for UDP sockets. 10) Module refcount leak in qdisc_create_dflt(), from Eric Dumazet. 11) Fix deadlock in cp_rx_poll() of 8139cp driver, from Gao Feng. 12) Memory leak in rhashtable's alloc_bucket_locks(), from Eric Dumazet. 13) Add new device ID to alx driver, from Owen Lin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (83 commits) Add Killer E2500 device ID in alx driver. net: smc91x: fix SMC accesses Documentation: networking: dsa: Remove platform device TODO net/mlx5: Increase number of ethtool steering priorities net/mlx5: Add error prints when validate ETS failed net/mlx5e: Fix memory leak if refreshing TIRs fails net/mlx5e: Add ethtool counter for TX xmit_more net/mlx5e: Fix ethtool -g/G rx ring parameter report with striding RQ net/mlx5e: Don't wait for SQ completions on close net/mlx5e: Don't post fragmented MPWQE when RQ is disabled net/mlx5e: Don't wait for RQ completions on close net/mlx5e: Limit UMR length to the device's limitation rhashtable: fix a memory leak in alloc_bucket_locks() sfc: fix potential stack corruption from running past stat bitmask team: loadbalance: push lacpdus to exact delivery net: hns: dereference ppe_cb->ppe_common_cb if it is non-null 8139cp: Fix one possible deadloop in cp_rx_poll i40e: Change some init flow for the client Revert "phy: IRQ cannot be shared" net: dsa: bcm_sf2: Fix race condition while unmasking interrupts ...
-
由 Linus Torvalds 提交于
Merge tag 'platform-drivers-x86-v4.8-4' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86 Pull x86 platform driver fixes from Darren Hart: "Remove module related code from two drivers that are only configurable as built-in: intel_pmic_gpio and platform/olpc" * tag 'platform-drivers-x86-v4.8-4' of git://git.infradead.org/users/dvhart/linux-platform-drivers-x86: intel_pmic_gpio: Make explicitly non-modular platform/olpc: Make ec explicitly non-modular
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux由 Linus Torvalds 提交于
Pull powerpc fixes from Ben Herrenschmidt: "This was meant to be sent early last week, but I has a change pending on one of the fixes and other things made me forget all about. Ugh. We have some misc fixes for powerpc 4.8. Some trivial bits and some regressions, and a trivial cleanup or two that I saw no point in letting rot in patchwork" * tag 'powerpc-4.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: signals: Discard transaction state from signal frames powerpc/powernv : Drop reference added by kset_find_obj() powerpc/tm: do not use r13 for tabort_syscall powerpc: move hmi.c to arch/powerpc/kvm/ powerpc: sysdev: cpm: fix gpio save_regs functions powerpc/pseries: PACA save area fix for MCE vs MCE powerpc/pseries: PACA save area fix for general exception vs MCE powerpc/prom: Fix sub-processor option passed to ibm, client-architecture-support powerpc, hotplug: Avoid to touch non-existent cpumasks. powerpc: migrate exception table users off module.h and onto extable.h powerpc/powernv/pci: fix iterator signedness powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb) cxl: use pcibios_free_controller_deferred() when removing vPHBs powerpc: mpc8349emitx: Delete unnecessary assignment for the field "owner" powerpc/512x: Delete unnecessary assignment for the field "owner" drivers/macintosh: Delete owner assignment powerpc: cputhreads: Add missing include file
-
- 29 8月, 2016 19 次提交
-
-
由 Jean Delvare 提交于
Attribute array it87_attributes_in lacks its NULL terminator, causing random behavior when operating on the attribute group. Fixes: 52929715 ("hwmon: (it87) Use is_visible for voltage sensors") Signed-off-by: NJean Delvare <jdelvare@suse.de> Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
-
由 Paul Gortmaker 提交于
The Kconfig entry controlling compilation of this code is: drivers/platform/x86/Kconfig:config GPIO_INTEL_PMIC drivers/platform/x86/Kconfig: bool "Intel PMIC GPIO support" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. We don't replace module.h with init.h since the file already has that. Cc: Alek Du <alek.du@intel.com> Cc: platform-driver-x86@vger.kernel.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Paul Gortmaker 提交于
The Kconfig entry controlling compilation of this code is: arch/x86/Kconfig:config OLPC arch/x86/Kconfig: bool "One Laptop Per Child support" ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. We delete the MODULE_LICENSE tag etc. since all that information was (or is now) contained at the top of the file in the comments. Cc: platform-driver-x86@vger.kernel.org Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Acked-by: NAndres Salomon <dilinger@queued.net> Signed-off-by: NDarren Hart <dvhart@linux.intel.com>
-
由 Owen Lin 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Russell King 提交于
Commit b70661c7 ("net: smc91x: use run-time configuration on all ARM machines") broke some ARM platforms through several mistakes. Firstly, the access size must correspond to the following rule: (a) at least one of 16-bit or 8-bit access size must be supported (b) 32-bit accesses are optional, and may be enabled in addition to the above. Secondly, it provides no emulation of 16-bit accesses, instead blindly making 16-bit accesses even when the platform specifies that only 8-bit is supported. Reorganise smc91x.h so we can make use of the existing 16-bit access emulation already provided - if 16-bit accesses are supported, use 16-bit accesses directly, otherwise if 8-bit accesses are supported, use the provided 16-bit access emulation. If neither, BUG(). This exactly reflects the driver behaviour prior to the commit being fixed. Since the conversion incorrectly cut down the available access sizes on several platforms, we also need to go through every platform and fix up the overly-restrictive access size: Arnd assumed that if a platform can perform 32-bit, 16-bit and 8-bit accesses, then only a 32-bit access size needed to be specified - not so, all available access sizes must be specified. This likely fixes some performance regressions in doing this: if a platform does not support 8-bit accesses, 8-bit accesses have been emulated by performing a 16-bit read-modify-write access. Tested on the Intel Assabet/Neponset platform, which supports only 8-bit accesses, which was broken by the original commit. Fixes: b70661c7 ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by: NRussell King <rmk+kernel@armlinux.org.uk> Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Florian Fainelli 提交于
Since commit 83c0afae ("net: dsa: Add new binding implementation"), the shortcomings of the dsa platform device have been addressed, remove that TODO item. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Acked-by: NAndrew Lunn <andrew@lunn.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Saeed Mahameed says: ==================== Mellanox 100G mlx5 fixes 2016-08-29 This series contains some bug fixes for the mlx5 core and mlx5 ethernet driver. From Saeed, Fix UMR to consider hardware translation table field size limitation when calculating the maximum number of MTTs required by the driver. Three patches to speed-up netdevice close time by serializing channel (SQs & RQs) destruction rather than issuing and waiting for hardware interrupts to free them. From Eran, Fix ethtool ring parameter reporting for striding RQ layout. Add error prints on ETS validation failure. From Kamal, Fix memory leak on error flow. From Maor, Fix ethtool steering priorities number. ==================== Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Maor Gottlieb 提交于
Ethtool has 11 flow tables, each flow table has its own priority. Increase the number of priorities to be aligned with the number of flow tables. Fixes: 1174fce8 ('net/mlx5e: Support l3/l4 flow type specs in ethtool flow steering') Signed-off-by: NMaor Gottlieb <maorg@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eran Ben Elisha 提交于
Upon set ETS failure due to user invalid input, add error prints to specify the exact error to the user. Fixes: cdcf1121 ('net/mlx5e: Validate BW weight values of ETS') Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kamal Heib 提交于
Free 'in' command object also when mlx5_core_modify_tir fails. Fixes: 724b2aa1 ("net/mlx5e: TIRs management refactoring") Signed-off-by: NKamal Heib <kamalh@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tariq Toukan 提交于
Add a counter in ethtool for the number of times that TX xmit_more was used. Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eran Ben Elisha 提交于
The driver RQ has two possible configurations: striding RQ and non-striding RQ. Until this patch, the driver always reported the number of hardware WQEs (ring descriptors). For non striding RQ configuration, this was OK since we have one WQE per pending packet For striding RQ, multiple packets can fit into one WQE. For better user experience we normalize the rx_pending parameter (size of wqe/mtu) as the average ring size in case of striding RQ. Fixes: 461017cb ('net/mlx5e: Support RX multi-packet WQE ...') Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
Instead of asking the firmware to flush the SQ (Send Queue) via asynchronous completions when moved to error, we handle SQ flush manually (mlx5e_free_tx_descs) same as we did when SQ flush got timed out or on tx_timeout. This will reduce SQs flush time and speedup interface down procedure. Moved mlx5e_free_tx_descs to the end of en_tx.c for tx critical code locality. Fixes: 29429f33 ('net/mlx5e: Timeout if SQ doesn't flush during close') Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
ICO (Internal control operations) SQ (Send Queue) is closed/disabled after RQ (Receive Queue). After RQ is closed an ICO SQ completion might post a fragmented MPWQE (Multi Packet Work Queue Element) into that RQ. As on regular RQ post, check if we are allowed to post to that RQ (RQ is enabled). Cleanup in-progress UMR MPWQE on mlx5e_free_rx_descs if needed. Fixes: bc77b240 ('net/mlx5e: Add fragmented memory support for RX multi packet WQE') Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
This will significantly reduce receive queue flush time on interface down. Instead of asking the firmware to flush the RQ (Receive Queue) via asynchronous completions when moved to error, we handle RQ flush manually (mlx5e_free_rx_descs) same as we did when RQ flush got timed out. This will reduce RQs flush time and speedup interface down procedure (ifconfig down) from 6 sec to 0.3 sec on a 48 cores system. Moved mlx5e_free_rx_descs en_main.c where it is needed, to keep en_rx.c free form non critical data path code for better code locality. Fixes: 6cd392a0 ('net/mlx5e: Handle RQ flush in error cases') Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Saeed Mahameed 提交于
ConnectX-4 UMR (User Memory Region) MTT translation table offset in WQE is limited to U16_MAX, before this patch we ignored that limitation and requested the maximum possible UMR translation length that the netdev might need (MAX channels * MAX pages per channel). In case of a system with #cores > 32 and when linear WQE allocation fails, falling back to using UMR WQEs will cause the RQ (Receive Queue) to get stuck. Here we limit UMR length to min(U16_MAX, max required pages) (while considering the required alignments) on driver load, by default U16_MAX is sufficient since the default RX rings value guarantees that we are in range, dynamically (on set_ringparam/set_channels) we will check if the new required UMR length (num mtts) is still in range, if not, fail the request. Fixes: bc77b240 ('net/mlx5e: Add fragmented memory support for RX multi packet WQE') Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Cyril Bur 提交于
Userspace can begin and suspend a transaction within the signal handler which means they might enter sys_rt_sigreturn() with the processor in suspended state. sys_rt_sigreturn() wants to restore process context (which may have been in a transaction before signal delivery). To do this it must restore TM SPRS. To achieve this, any transaction initiated within the signal frame must be discarded in order to be able to restore TM SPRs as TM SPRs can only be manipulated non-transactionally.. >From the PowerPC ISA: TM Bad Thing Exception [Category: Transactional Memory] An attempt is made to execute a mtspr targeting a TM register in other than Non-transactional state. Not doing so results in a TM Bad Thing: [12045.221359] Kernel BUG at c000000000050a40 [verbose debug info unavailable] [12045.221470] Unexpected TM Bad Thing exception at c000000000050a40 (msr 0x201033) [12045.221540] Oops: Unrecoverable exception, sig: 6 [#1] [12045.221586] SMP NR_CPUS=2048 NUMA PowerNV [12045.221634] Modules linked in: xt_CHECKSUM iptable_mangle ipt_MASQUERADE nf_nat_masquerade_ipv4 iptable_nat nf_nat_ipv4 nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ipt_REJECT nf_reject_ipv4 xt_tcpudp bridge stp llc ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ip_tables x_tables kvm_hv kvm uio_pdrv_genirq ipmi_powernv uio powernv_rng ipmi_msghandler autofs4 ses enclosure scsi_transport_sas bnx2x ipr mdio libcrc32c [12045.222167] CPU: 68 PID: 6178 Comm: sigreturnpanic Not tainted 4.7.0 #34 [12045.222224] task: c0000000fce38600 ti: c0000000fceb4000 task.ti: c0000000fceb4000 [12045.222293] NIP: c000000000050a40 LR: c0000000000163bc CTR: 0000000000000000 [12045.222361] REGS: c0000000fceb7ac0 TRAP: 0700 Not tainted (4.7.0) [12045.222418] MSR: 9000000300201033 <SF,HV,ME,IR,DR,RI,LE,TM[SE]> CR: 28444280 XER: 20000000 [12045.222625] CFAR: c0000000000163b8 SOFTE: 0 PACATMSCRATCH: 900000014280f033 GPR00: 01100000b8000001 c0000000fceb7d40 c00000000139c100 c0000000fce390d0 GPR04: 900000034280f033 0000000000000000 0000000000000000 0000000000000000 GPR08: 0000000000000000 b000000000001033 0000000000000001 0000000000000000 GPR12: 0000000000000000 c000000002926400 0000000000000000 0000000000000000 GPR16: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000 GPR24: 0000000000000000 00003ffff98cadd0 00003ffff98cb470 0000000000000000 GPR28: 900000034280f033 c0000000fceb7ea0 0000000000000001 c0000000fce390d0 [12045.223535] NIP [c000000000050a40] tm_restore_sprs+0xc/0x1c [12045.223584] LR [c0000000000163bc] tm_recheckpoint+0x5c/0xa0 [12045.223630] Call Trace: [12045.223655] [c0000000fceb7d80] [c000000000026e74] sys_rt_sigreturn+0x494/0x6c0 [12045.223738] [c0000000fceb7e30] [c0000000000092e0] system_call+0x38/0x108 [12045.223806] Instruction dump: [12045.223841] 7c800164 4e800020 7c0022a6 f80304a8 7c0222a6 f80304b0 7c0122a6 f80304b8 [12045.223955] 4e800020 e80304a8 7c0023a6 e80304b0 <7c0223a6> e80304b8 7c0123a6 4e800020 [12045.224074] ---[ end trace cb8002ee240bae76 ]--- It isn't clear exactly if there is really a use case for userspace returning with a suspended transaction, however, doing so doesn't (on its own) constitute a bad frame. As such, this patch simply discards the transactional state of the context calling the sigreturn and continues. Reported-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com> Signed-off-by: NCyril Bur <cyrilbur@gmail.com> Tested-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com> Reviewed-by: NLaurent Dufour <ldufour@linux.vnet.ibm.com> Acked-by: NSimon Guo <wei.guo.simon@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Mukesh Ojha 提交于
In a situation, where Linux kernel gets notified about duplicate error log from OPAL, it is been observed that kernel fails to remove sysfs entries (/sys/firmware/opal/elog/0xXXXXXXXX) of such error logs. This is because, we currently search the error log/dump kobject in the kset list via 'kset_find_obj()' routine. Which eventually increment the reference count by one, once it founds the kobject. So, unless we decrement the reference count by one after it found the kobject, we would not be able to release the kobject properly later. This patch adds the 'kobject_put()' which was missing earlier. Signed-off-by: NMukesh Ojha <mukesh02@linux.vnet.ibm.com> Cc: stable@vger.kernel.org Reviewed-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Nicholas Piggin 提交于
tabort_syscall runs with RI=1, so a nested recoverable machine check will load the paca into r13 and overwrite what we loaded it with, because exceptions returning to privileged mode do not restore r13. Fixes: b4b56f9e (powerpc/tm: Abort syscalls in active transactions) Cc: stable@vger.kernel.org Signed-off-by: NNick Piggin <npiggin@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-