- 25 1月, 2014 1 次提交
-
-
由 Paul Gortmaker 提交于
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NJohn Crispin <blogic@openwrt.org> Patchwork: http://patchwork.linux-mips.org/patch/6320/
-
- 15 7月, 2013 1 次提交
-
-
由 Paul Gortmaker 提交于
commit 3747069b25e419f6b51395f48127e9812abc3596 upstream. The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) and are flagged as __cpuinit -- so if we remove the __cpuinit from the arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit related content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. Here, we remove all the MIPS __cpuinit from C code and __CPUINIT from asm files. MIPS is interesting in this respect, because there are also uasm users hiding behind their own renamed versions of the __cpuinit macros. [1] https://lkml.org/lkml/2013/5/20/589 [ralf@linux-mips.org: Folded in Paul's followup fix.] Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5494/ Patchwork: https://patchwork.linux-mips.org/patch/5495/ Patchwork: https://patchwork.linux-mips.org/patch/5509/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 17 5月, 2013 1 次提交
-
-
由 David Daney 提交于
This reverts commit d532f3d2. The original commit has several problems: 1) Doesn't work with 64-bit kernels. 2) Calls TLBMISS_HANDLER_SETUP() before the code is generated. 3) Calls TLBMISS_HANDLER_SETUP() twice in per_cpu_trap_init() when only one call is needed. [ralf@linux-mips.org: Also revert the bits of the ASID patch which were hidden in the KVM merge.] Signed-off-by: NDavid Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: "Steven J. Hill" <Steven.Hill@imgtec.com> Cc: David Daney <david.daney@cavium.com> Patchwork: https://patchwork.linux-mips.org/patch/5242/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 08 5月, 2013 1 次提交
-
-
由 Steven J. Hill 提交于
Original patch by Ralf Baechle and removed by Harold Koerfgen with commit f67e4ffc79905482c3b9b8c8dd65197bac7eb508. This allows for more generic kernels since the size of the ASID and corresponding masks can be determined at run-time. This patch is also required for the new Aptiv cores and has been tested on Malta and Malta Aptiv platforms. [ralf@linux-mips.org: Added relevant part of fix https://patchwork.linux-mips.org/patch/5213/] Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 29 3月, 2012 1 次提交
-
-
由 David Howells 提交于
Disintegrate asm/system.h for MIPS. Signed-off-by: NDavid Howells <dhowells@redhat.com> Acked-by: NRalf Baechle <ralf@linux-mips.org> cc: linux-mips@linux-mips.org
-
- 08 12月, 2011 1 次提交
-
-
由 Ralf Baechle 提交于
Move add_wired_entry to its own header file from where it will be always included. Patch up other users of add_wired_entry to also include the header as needed. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 25 10月, 2011 1 次提交
-
-
由 Manuel Lauss 提交于
For Alchemy-PCI I need to add a wired entry after resuming from RAM; remove the __init from add_wired_entry() so that this actually works. Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2684/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 06 4月, 2011 1 次提交
-
-
由 Justin P. Mattock 提交于
Signed-off-by: NJustin P. Mattock <justinmattock@gmail.com> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 25 6月, 2009 1 次提交
-
-
由 Ralf Baechle 提交于
Some of the were relying into smp.h being dragged in by another header which of course is fragile. <asm/cpu-info.h> uses smp_processor_id() only in macros and including smp.h there leads to an include loop, so don't change cpu-info.h. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 21 5月, 2009 1 次提交
-
-
由 Greg Ungerer 提交于
The address range size calculation inside local_flush_tlb_kernel_range() is being truncated by a too small size variable holder on 64-bit systems. The truncated size can result in an erroneous tlbsize check that means we sit spinning inside a loop trying to flush a hige number of TLB entries. This is for all intents and purposes a system hang. Fix by using an appropriately sized valiable to hold the size. [Ralf: Greg's original patch submission identified the issue and fixed one instance in tlb-r4k.c but there there were several more. For consistency I also modified tlb-r3k.c even though that file is only used on 32-bit.] Signed-off-by: NGreg Ungerer <gerg@snapgear.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 31 7月, 2008 1 次提交
-
-
由 Ralf Baechle 提交于
Bug originally found and reported by Julia Lawall <julia@diku.dk>. I decieded that the whole error check was mostly useless paranoia and should be discarded. It would only ever trigger if r3k_have_wired_reg has a wrong value. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 12 3月, 2008 1 次提交
-
-
由 Ralf Baechle 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-