- 05 4月, 2014 1 次提交
-
-
由 Joe Perches 提交于
Most of it duplicates function tracing and one of them has an uncompilable printf %P use. Others have format/argument mismatches. Remove unused DBG1 macro definition Neaten uart401.c use of ok test around this DBG macro removal. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 04 4月, 2014 2 次提交
-
-
由 Ondrej Zary 提交于
Save/restore routing and rate registers during suspend/resume. This fixes S/PDIF input being disabled after resume. Tested with Audiophile 24/96. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ondrej Zary 提交于
Also restore AK4xxx mixer volumes on resume for M-Audio ICE1712-based cards. This fixes incorrect (sound working) zero mixer volumes after resume. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 4月, 2014 4 次提交
-
-
由 Ondrej Zary 提交于
Add S/PDIF suspend support for M-Audio cards based on ICE1712 chip. Tested (playback only) on Audiophile 24/96. Capture will probably not work. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ondrej Zary 提交于
Separate HW initialization from device creation. This is needed for suspend/resume support. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The recent fixups for HP laptops to support the mute LED made the speaker output silent on some machines. It turned out that they use the NID 0x18 for the speaker while it's also used for controlling the LED via VREF bits although the current driver code blindly assumes that such a node is a mic pin (where 0x18 is usually so). This patch fixes the problem by only changing the VREF bits and keeping the other pin ctl bits. Reported-and-tested-by: NHui Wang <hui.wang@canonical.com> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Kailang Yang 提交于
If it only has single output of HP out of machine. The driver parser will copy hp_pins to line_out_pins. hp_pins will empty for alc283_init and alc283_shutup functions. This will cause not have value for hp_pin_sense. Add check line_out_type code will solve it . Signed-off-by: NKailang Yang <kailang@realtek.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 31 3月, 2014 6 次提交
-
-
由 Takashi Iwai 提交于
Merge tag 'asoc-v3.15-4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Final updates for v3.15 merge window A few more updates from last week - use of the tdm_slot mapping from Xiubo plus a few smaller fixes and cleanups.
-
由 Ondrej Zary 提交于
Add suspend support for M-Audio cards based on ICE1712 chip. Tested with M-Audio Audiophile 24/96. S/PDIF will probably not work. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Ondrej Zary 提交于
Add suspend/resume support for ICE1712 chip. Card-specific subdrivers need to enable it and provide callbacks that suspend/resume the codecs. Signed-off-by: NOndrej Zary <linux@rainbow-software.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
-
由 W. Trevor King 提交于
The `lspci -nnvv` output contains (wrapped for line length): 00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04) Subsystem: ASUSTeK Computer Inc. Device [1043:115d] Signed-off-by: NW. Trevor King <wking@tremily.us> Cc: <stable@vger.kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Dan Carpenter 提交于
This used to be a part of a condition until f3d145aa ('ALSA: asihpi: MMAP for non-busmaster cards') but now it's not and we can remove an indent level. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 3月, 2014 14 次提交
-
-
由 Hui Wang 提交于
When we plug a 3-ring headset on the Dell machines (VID: 0x10ec0255, SID: 0x10280632; VID: 0x10ec0293, SID: 0x1028062c; VID: 0x10ec0293, SID: 0x1028062e), the headset mic can't be detected, after apply this patch, the headset mic can work well. BugLink: https://bugs.launchpad.net/bugs/1297581 Cc: David Henningsson <david.henningsson@canonical.com> Cc: stable@vger.kernel.org Signed-off-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
-
由 Mark Brown 提交于
ASoC: A few more fixes for rcar Since Linus hasn't done the release yet and Morimoto-san here are some additional bug fixes for rcar which Morimoto-san sent overnight. # gpg: Signature made Mon 24 Mar 2014 11:21:18 GMT using RSA key ID 7EA229BD # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
由 Mark Brown 提交于
ASoC: Updates for v3.15 A few more updates for the merge window: - Fixes for the simple-card DAI format DT mess. - A new driver for Cirrus cs42xx8 devices. - DT support for a couple more devices. - A revert of a previous buggy fix for soc-pcm, plus a few more fixes and cleanups. # gpg: Signature made Sun 23 Mar 2014 16:56:11 GMT using RSA key ID 7EA229BD # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
由 Mark Brown 提交于
ASoC: Updates for v3.15 This is mostly a few additional fixes from Lars-Peter, a new driver and cleaning up a git failure with merging the Intel branch (combined with an xargs failure to pay attention to error codes). The history lists a bunch of additional commits for the branch but the content of those commits is actually present already but not recorded in history due to git failing. Unfortunately xargs is used in the merge script and it doesn't do a good job of noticing errors from the commands it invokes. # gpg: Signature made Thu 13 Mar 2014 14:25:44 GMT using RSA key ID 7EA229BD # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
由 Mark Brown 提交于
ASoC: Updates for v3.15 Quite a busy release for ASoC this time, more on janitorial work than exciting new features but welcome nontheless: - Lots of cleanups from Takashi for enumerations; the original API for these was error prone so he's refactored lots of code to use more modern APIs which avoid issues. - Elimination of the ASoC level wrappers for I2C and SPI moving us closer to converting to regmap completely and avoiding some randconfig hassle. - Provide both manually and transparently locked DAPM APIs rather than a mix of the two fixing some concurrency issues. - Start converting CODEC drivers to use separate bus interface drivers rather than having them all in one file helping avoid dependency issues. - DPCM support for Intel Haswell and Bay Trail platforms. - Lots of work on improvements for simple-card, DaVinci and the Renesas rcar drivers. - New drivers for Analog Devices ADAU1977, TI PCM512x and parts of the CSR SiRF SoC. # gpg: Signature made Wed 12 Mar 2014 23:05:45 GMT using RSA key ID 7EA229BD # gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>" # gpg: aka "Mark Brown <broonie@debian.org>" # gpg: aka "Mark Brown <broonie@kernel.org>" # gpg: aka "Mark Brown <broonie@tardis.ed.ac.uk>" # gpg: aka "Mark Brown <broonie@linaro.org>" # gpg: aka "Mark Brown <Mark.Brown@linaro.org>"
-
由 Mark Brown 提交于
Merge remote-tracking branches 'asoc/fix/cs42l51', 'asoc/fix/cs42l52', 'asoc/fix/cs42l73', 'asoc/fix/rcar', 'asoc/fix/spear' and 'asoc/fix/tegra' into asoc-linus
-
由 Mark Brown 提交于
-
由 Lucas Stach 提交于
On Tegra the convention is to have a single machine driver that's controlling the whole audio subsystem. Move the clock handling to the machine driver, to be in line with the other Tegra drivers and give the machine driver full control over the single Tegra audio PLL. Signed-off-by: NLucas Stach <dev@lynxeye.de> Acked-by: NStephen Warren <swarren@nvidia.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jean-Francois Moine 提交于
Some simple audio cards may have many DAI links. This patch extends the simple-card driver for handling such cards. Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jean-Francois Moine 提交于
Many couples of CPU/CODEC DAI links may be described in the DT thanks to 'simple-audio-card,dai-link' containers. Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Jean-Francois Moine 提交于
The DAI link array and the properties (fmt, sysclk slots) are hard-coded for a single CPU / CODEC link. This patch dynamically allocates the DAI link array and the properties with the aim of supporting many DAI links. Signed-off-by: NJean-Francois Moine <moinejf@free.fr> Signed-off-by: NMark Brown <broonie@linaro.org>
-
- 25 3月, 2014 13 次提交
-
-
由 Xiubo Li 提交于
This patch add .xlate_tdm_slot_mask support for IMX SSI, and this will generate the TDM slot TX and RX masks. Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Xiubo Li 提交于
This patch add .xlate_tdm_slot_mask support for ESAI, and this will generate the TDM slot TX and RX masks. Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Xiubo Li 提交于
This patch add fsl_asoc_xlate_tdm_slot_mask() support for utils. For the some spcified DAI driver, this will be used to generate the TDM slot TX/RX mask. And the TX/RX mask will use a 0 bit for an active slot as default, and the default active bits are at the LSB of the masks. Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Xiubo Li 提交于
The 'of_' is not appropriate here for there hasn't any DT parsing. Signed-off-by: NXiubo Li <Li.Xiubo@freescale.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Kuninori Morimoto 提交于
rcar_sound,ssi/src/dai subnode documentation become more cleaner Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Lars-Peter Clausen 提交于
Before we had card level support for DAPM and controls machine drivers would register their controls and DAPM elements with the CODEC. This required us to temporarily unset the name_prefix of a CODEC during the rtd init callback to avoid the machine level controls getting the CODEC's prefix. Now that all machine drivers properly register their machine level controls and DAPM elements with the card rather than with the CODEC we can drop the hack that sets the CODEC's name_prefix to NULL while calling the DAI link or AUX dev init callback. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@linaro.org>
-
由 Takashi Iwai 提交于
The auto-parser may ignore some pins that could be valid when they don't match with the assumption or if there are way too many pins assigned to the same output type. So far, such a pin has been silently ignored, but it's better to leave a message, which would help for debugging and understanding the problem. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux由 Linus Torvalds 提交于
Pull parisc updates from Helge Deller: - revert parts of the latest patch regarding font selection with STICON console - wire up the utimes() syscall for parisc - remove the unused parisc tmpalias code and unnecessary arch*relax defines * 'parisc-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: locks: remove redundant arch_*_relax operations parisc: wire up sys_utimes parisc: Remove unused CONFIG_PARISC_TMPALIAS code partly revert commit 8a10bc9d: parisc/sti_console: prefer Linux fonts over built-in ROM fonts
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc由 Linus Torvalds 提交于
Pull sparc fixes from David Miller: 1) Do serial locking in a way that makes things clear that these are IRQ spinlocks. 2) Conversion to generic idle loop broke first generation Niagara machines, need to have %pil interrupts enabled during cpu yield hypervisor call. 3) Do not use magic constants for iterations over tsb tables, from Doug Wilson. 4) Fix erroneous truncation of 64-bit system call return values to 32-bit. From Dave Kleikamp. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Make sure %pil interrupts are enabled during hypervisor yield. sparc64:tsb.c:use array size macro rather than number sparc64: don't treat 64-bit syscall return codes as 32-bit sparc: serial: Clean up the locking for -rt
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking fixes from David Miller: 1) OpenVswitch's lookup_datapath() returns error pointers, so don't check against NULL. From Jiri Pirko. 2) pfkey_compile_policy() code path tries to do a GFP_KERNEL allocation under RCU locks, fix by using GFP_ATOMIC when necessary. From Nikolay Aleksandrov. 3) phy_suspend() indirectly passes uninitialized data into the ethtool get wake-on-land implementations. Fix from Sebastian Hesselbarth. 4) CPSW driver unregisters CPTS twice, fix from Benedikt Spranger. 5) If SKB allocation of reply packet fails, vxlan's arp_reduce() defers a NULL pointer. Fix from David Stevens. 6) IPV6 neigh handling in vxlan doesn't validate the destination address properly, and it builds a packet with the src and dst reversed. Fix also from David Stevens. 7) Fix spinlock recursion during subscription failures in TIPC stack, from Erik Hugne. 8) Revert buggy conversion of davinci_emac to devm_request_irq, from Chrstian Riesch. 9) Wrong flags passed into forwarding database netlink notifications, from Nicolas Dichtel. 10) The netpoll neighbour soliciation handler checks wrong ethertype, needs to be ETH_P_IPV6 rather than ETH_P_ARP. Fix from Li RongQing. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits) tipc: fix spinlock recursion bug for failed subscriptions vxlan: fix nonfunctional neigh_reduce() net: davinci_emac: Fix rollback of emac_dev_open() net: davinci_emac: Replace devm_request_irq with request_irq netpoll: fix the skb check in pkt_is_ns net: micrel : ks8851-ml: add vdd-supply support ip6mr: fix mfc notification flags ipmr: fix mfc notification flags rtnetlink: fix fdb notification flags tcp: syncookies: do not use getnstimeofday() netlink: fix setsockopt in mmap examples in documentation openvswitch: Correctly report flow used times for first 5 minutes after boot. via-rhine: Disable device in error path ATHEROS-ATL1E: Convert iounmap to pci_iounmap vxlan: fix potential NULL dereference in arp_reduce() cnic: Update version to 2.5.20 and copyright year. cnic,bnx2i,bnx2fc: Fix inconsistent use of page size cnic: Use proper ulp_ops for per device operations. net: cdc_ncm: fix control message ordering ipv6: ip6_append_data_mtu do not handle the mtu of the second fragment properly ...
-
由 Erik Hugne 提交于
If a topology event subscription fails for any reason, such as out of memory, max number reached or because we received an invalid request the correct behavior is to terminate the subscribers connection to the topology server. This is currently broken and produces the following oops: [27.953662] tipc: Subscription rejected, illegal request [27.955329] BUG: spinlock recursion on CPU#1, kworker/u4:0/6 [27.957066] lock: 0xffff88003c67f408, .magic: dead4ead, .owner: kworker/u4:0/6, .owner_cpu: 1 [27.958054] CPU: 1 PID: 6 Comm: kworker/u4:0 Not tainted 3.14.0-rc6+ #5 [27.960230] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [27.960874] Workqueue: tipc_rcv tipc_recv_work [tipc] [27.961430] ffff88003c67f408 ffff88003de27c18 ffffffff815c0207 ffff88003de1c050 [27.962292] ffff88003de27c38 ffffffff815beec5 ffff88003c67f408 ffffffff817f0a8a [27.963152] ffff88003de27c58 ffffffff815beeeb ffff88003c67f408 ffffffffa0013520 [27.964023] Call Trace: [27.964292] [<ffffffff815c0207>] dump_stack+0x45/0x56 [27.964874] [<ffffffff815beec5>] spin_dump+0x8c/0x91 [27.965420] [<ffffffff815beeeb>] spin_bug+0x21/0x26 [27.965995] [<ffffffff81083df6>] do_raw_spin_lock+0x116/0x140 [27.966631] [<ffffffff815c6215>] _raw_spin_lock_bh+0x15/0x20 [27.967256] [<ffffffffa0008540>] subscr_conn_shutdown_event+0x20/0xa0 [tipc] [27.968051] [<ffffffffa000fde4>] tipc_close_conn+0xa4/0xb0 [tipc] [27.968722] [<ffffffffa00101ba>] tipc_conn_terminate+0x1a/0x30 [tipc] [27.969436] [<ffffffffa00089a2>] subscr_conn_msg_event+0x1f2/0x2f0 [tipc] [27.970209] [<ffffffffa0010000>] tipc_receive_from_sock+0x90/0xf0 [tipc] [27.970972] [<ffffffffa000fa79>] tipc_recv_work+0x29/0x50 [tipc] [27.971633] [<ffffffff8105dbf5>] process_one_work+0x165/0x3e0 [27.972267] [<ffffffff8105e869>] worker_thread+0x119/0x3a0 [27.972896] [<ffffffff8105e750>] ? manage_workers.isra.25+0x2a0/0x2a0 [27.973622] [<ffffffff810648af>] kthread+0xdf/0x100 [27.974168] [<ffffffff810647d0>] ? kthread_create_on_node+0x1a0/0x1a0 [27.974893] [<ffffffff815ce13c>] ret_from_fork+0x7c/0xb0 [27.975466] [<ffffffff810647d0>] ? kthread_create_on_node+0x1a0/0x1a0 The recursion occurs when subscr_terminate tries to grab the subscriber lock, which is already taken by subscr_conn_msg_event. We fix this by checking if the request to establish a new subscription was successful, and if not we initiate termination of the subscriber after we have released the subscriber lock. Signed-off-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Stevens 提交于
The VXLAN neigh_reduce() code is completely non-functional since check-in. Specific errors: 1) The original code drops all packets with a multicast destination address, even though neighbor solicitations are sent to the solicited-node address, a multicast address. The code after this check was never run. 2) The neighbor table lookup used the IPv6 header destination, which is the solicited node address, rather than the target address from the neighbor solicitation. So neighbor lookups would always fail if it got this far. Also for L3MISSes. 3) The code calls ndisc_send_na(), which does a send on the tunnel device. The context for neigh_reduce() is the transmit path, vxlan_xmit(), where the host or a bridge-attached neighbor is trying to transmit a neighbor solicitation. To respond to it, the tunnel endpoint needs to do a *receive* of the appropriate neighbor advertisement. Doing a send, would only try to send the advertisement, encapsulated, to the remote destinations in the fdb -- hosts that definitely did not do the corresponding solicitation. 4) The code uses the tunnel endpoint IPv6 forwarding flag to determine the isrouter flag in the advertisement. This has nothing to do with whether or not the target is a router, and generally won't be set since the tunnel endpoint is bridging, not routing, traffic. The patch below creates a proxy neighbor advertisement to respond to neighbor solicitions as intended, providing proper IPv6 support for neighbor reduction. Signed-off-by: NDavid L Stevens <dlstevens@us.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-