Move Freescale elbc interrupt from nand driver to elbc driver.
Then all elbc devices can use the interrupt instead of ONLY nand.

For former nand driver, it had the two functions:

1. detecting nand flash partitions;
2. registering elbc interrupt.

Now, second function is removed to fsl_lbc.c.
Signed-off-by: NLan Chunhe-B25806 <b25806@freescale.com>
Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com>
Reviewed-by: NAnton Vorontsov <cbouatmailru@gmail.com>
Cc: Wood Scott-B07421 <B07421@freescale.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This is the same driver submitted by ST Micros SPEAr team but
generalized and tested on the ST-Ericsson U300. It probably
easily works on the NHK8815 too.
Signed-off-by: NVipin Kumar <vipin.kumar@st.com>
Signed-off-by: NRajeev Kumar <rajeev-dlh.kumar@st.com>
Signed-off-by: NShiraz Hashim <shiraz.hashim@st.com>
Signed-off-by: NViresh Kumar <viresh.kumar@st.com>
Signed-off-by: NLinus Walleij <linus.walleij@stericsson.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Adding a new flash definition would need less code.
Keep the platform passing flash definition method.
If one flash is both defined in platform data and builtin table,
driver would select the one from platform data first.

By this way, platform could select the timing most suit for itself,
not need to follow the common settings.
Signed-off-by: NLei Wen <leiwen@marvell.com>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: NEric Miao <eric.y.miao@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Add support for the NAND controller on JZ4740 SoCs.
Signed-off-by: NLars-Peter Clausen <lars@metafoo.de>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: linux-mtd@lists.infradead.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/1470/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NKarl Beldan <karl.beldan@gmail.com>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Look for dependency checks for "FOO" when inside of an "if FOO" block and remove them.
Signed-off-by: NKyle Spaans <kspaans@uwaterloo.ca>
Reviewed-by: NRobert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Move MTD_NAND_ECC and MTD_NAND_ECC_SMC above NAND memuconfig, to unbreak
display in xconfig. This shouldn't change any dependencies.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

There is more work to be done on this but it is basically working now.
Signed-off-by: NJason Roberts <jason.e.roberts@intel.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NFerenc Wagner <wferi@niif.hu>
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This way drivers could use ecc routines without depedency on whole nand
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Update the Kconfig entry for the sh_flctl driver to
enable build on SH-Mobile ARM platforms.
Signed-off-by: NMagnus Damm <damm@opensource.se>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

r852 fails to build when CONFIG_PCI is not enabled since it uses
pci_*() calls and is a PCI driver, so it should depend on PCI
to prevent build errors.
It should also #include <linux/pci.h>.

drivers/mtd/nand/r852.c:1053: error: implicit declaration of function 'pci_prepare_to_sleep'
drivers/mtd/nand/r852.c:1062: error: implicit declaration of function 'pci_back_from_sleep'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Cc: Maxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This adds a driver for Ricoh R5C852 xD card reader.

This reader is a part of larger mulifunction chip
and found at least in R5C832

Driver is complete, but bewere of the fact that some
(probably only type M) xD cards are 'fake' which means that
they have an on board CPU and expose emulated nand command set

These cards don't even store the  oob area on the flash,
but generate it on the fly from something else.

Thus they demand to have proper values written in the oob area,
and therefore only useful with SmartMedia FTL.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

(and remove the CONFIG_MTD_NAND_SMARTMEDIA option which isn't going to be
used now that we're doing it this way)
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This small module implements few helpers that are usefull
for nand drivers for SmartMedia/xD card readers.
Signed-off-by: NMaxim Levitsky <maximlevitsky@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Adds NAND Flash Controller driver for MPC5121 Revision 2.
All device features, except hardware ECC and power management,
are supported.
Signed-off-by: NPiotr Ziecik <kosmo@semihalf.com>
Signed-off-by: NWolfgang Denk <wd@denx.de>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch contains a few changes for the sh_flctl driver:
 - not sh7723-only driver - get rid of kconfig dependency
 - use dev_err() instead of printk()
 - use __devinit and __devexit for probe()/remove()
 - fix probe() return values
Signed-off-by: NMagnus Damm <damm@opensource.se>
Acked-by: NYoshihiro Shimoda <shimoda.yoshihiro@renesas.com>
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>

Signed-off-by: NBaruch Siach <baruch@tkos.co.il>
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

The ts72xx platform has been updated to use the generic platform nand
driver (plat_nand.c).  This removes the now-defunct ts7250.c nand driver.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Matthieu Crapet <mcrapet@gmail.com>
Cc: Jesse Off <joff@embeddedARM.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

The platform has never been fully merged 
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
Cc: Thomas Koeller <thomas.koeller@baslerweb.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Cc: linux-kernel@vger.kernel.org
Cc: linux-mtd@lists.infradead.org
Acked-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Acked-by: NWim Van Sebroeck <wim@iguana.be>

MTD_NAND_PXA3xx module is shared between ARCH_PXA and ARCH_MMP. Update
this configuration according to it.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>

Additionally, some excessive newlines removed.
Signed-off-by: NMichael Roth <mroth@nessie.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NLeo Hao Chen <leochen@broadcom.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NAlessandro Rubini <rubini@unipv.it>
Acked-by: NAndrea Gallo <andrea.gallo@stericsson.com>
Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch adds DMA mode support for nand prefetch/post-write engine.
Signed-off-by: NVimal Singh <vimalsingh@ti.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch adds prefetch support to access nand flash in mpu mode.
This patch also adds 8-bit nand support (omap_read/write_buf8).
Prefetch can be used for both 8- and 16-bit devices.
Signed-off-by: NVimal Singh <vimalsingh@ti.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Add w90p910 NAND driver for w90p910 evaluation board
based on w90p910,there is a K8F1G08 NAND on my board.

[dwmw2: depend on MTD_PARTITIONS]
Signed-off-by: NWan ZongShun <mcuos.com@gmail.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

.ko is normally not included in Kconfig help, make it consistent.
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Add s3c6400 support to the s3c2410 driver. The nand controller in
the s3c64xx devices is compatible with the one in the s3c2412, so
simply reuse that code.
Signed-off-by: NPeter Korsgaard <jacmet@sunsite.dk>
Acked-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This driver is present in the OMAP tree, now pushing it to MTD.

Original author(s):
       Jian Zhang <jzhang@ti.com>
Signed-off-by: NVimal Singh <vimalsingh@ti.com>
Cc: Jian Zhang <jzhang@ti.com>
Cc: Artem Bityutskiy <dedekind@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NIlya Yanok <yanok@emcraft.com>
Acked-by: NWolfgang Grandegger <wg@grandegger.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This patch adds support for the integrated NAND flash controller of the
TXx9 family.

Once upon a time there were tx4925ndfmc and tx4938ndfmc driver.  They
were removed due to bitrot in 2005.
This new driver is completely rewritten based on a driver in CELF patch
archive.
Signed-off-by: NAtsushi Nemoto <anemo@mba.ocn.ne.jp>
Cc: Ralf Bächle <ralf@linux-mips.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

This is a device driver for the NAND flash controller found on the various
DaVinci family chips.  It handles up to four SoC chipselects, and some
flavors of secondary chipselect (e.g.  based on upper bits of the address
bus) as used with some multichip packages.  (Including the 2 GiB chips
used on some TI devel boards.)

The 1-bit ECC hardware is supported (3 bytes ECC per 512 bytes data); but
not yet the newer 4-bit ECC (10 bytes ECC per 512 bytes data), as
available on chips like the DM355 or OMAP-L137 and needed with the more
error-prone MLC NAND chips.

This is a cleaned-up version of code that's been in use for several years
now; sanity checked with the new drivers/mtd/tests.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NSudhakar Rajashekhara <sudhakar.raj@ti.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

X86_PC is the only remaining 'sub' architecture, so we dont need
it anymore.

This also cleans up a few spurious references to X86_PC in the
driver space - those certainly should be X86.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>

X86_GENERICARCH is a misnomer - it contains non-PC 32-bit architectures
that are not included in the default build.

Rename it to X86_32_NON_STANDARD.
Signed-off-by: NIngo Molnar <mingo@elte.hu>

The current ndfc driver only compiles under arch/ppc. This arch was
removed from the kernel. I notice the event entry for the ndfc in
Kconfig has been removed in 2.6.28.

This patch converts the ndfc to a proper OF (OpenFirmware) driver. I
can give a working example of the DTS if needed.

The patch has been in production use on the PIKA Warp Appliance and is
in use by others. The Warp basically boots from NAND, so the ndfc driver
is very important to us.
Signed-off-by: NSean MacLennan <smaclennan@pikatech.com>
Acked-By: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>

Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>