This allows reservation objects to be used in dma-buf. it's required
for implementing polling support on the fences that belong to a dma-buf.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Acked-by: Mauro Carvalho Chehab <m.chehab@samsung.com> #drivers/media/v4l2-core/
Acked-by: Thomas Hellstrom <thellstrom@vmware.com> #drivers/gpu/drm/ttm
Acked-by: NSumit Semwal <sumit.semwal@linaro.org>
Acked-by: NDaniel Vetter <daniel@ffwll.ch>
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net> #drivers/gpu/drm/armada/
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

For Haswell and Broadwell, if the display power well has been disabled,
the display audio controller divider values EM4 M VALUE and EM5 N VALUE
will have been lost. The CDCLK frequency is required for reprogramming them
to generate 24MHz HD-A link BCLK. So provide a private interface for the
audio driver to query CDCLK.

This is a stopgap solution until a more generic interface between audio
and display drivers has been implemented.
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NMengdong Lin <mengdong.lin@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Commit "drm/vmwgfx: correct fb_fix_screeninfo.line_length", while fixing a
vmwgfx fbdev bug, also writes the pitch to a supposedly read-only register:
SVGA_REG_BYTES_PER_LINE, while it should be (and also in fact is) written to
SVGA_REG_PITCHLOCK.

This patch is Cc'd stable because of the unknown effects writing to this
register might have, particularly on older device versions.

v2: Updated log message.

Cc: stable@vger.kernel.org
Cc: Christopher Friedt <chrisfriedt@gmail.com>
Tested-by: NChristopher Friedt <chrisfriedt@gmail.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>

1539fb9b managed to somehow +x
drm_drv.c undo it.
Signed-off-by: NDave Airlie <airlied@redhat.com>

Userspace shouldn't be able to access them.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Volatile bit was in the wrong location.  This bit is
not used at the moment.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This prevents a panic: radeon_crtc_handle_page_flip() could run before
radeon_flip_work_func(), triggering the BUG_ON() in drm_vblank_put().
Tested-by: NDieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We were using the vddc mask rather than the vddci mask.

Bug:
https://bugzilla.kernel.org/show_bug.cgi?id=79071

May also fix:
https://bugs.freedesktop.org/show_bug.cgi?id=69723

Noticed by: Dieter Nützel <Dieter@nuetzel-hh.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

We were using the vddc mask rather than the vddci mask.

Bug:
https://bugzilla.kernel.org/show_bug.cgi?id=79071

Possibly also fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=68571Noticed-by: NJonathan Howard <jonathan@unbiased.name>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

v2: agd5f: compile fix
Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NStefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Some monitors seem to have problems with deep color enabled, even
though they claim to support it.  I'm not sure if the monitor
need a quirk or if the driver is doing something the monitor doesn't
like.  At this point lets just disable deep color by default like
we did for hdmi audio and work through the bugs so we can eventually
enable it by default.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=80531Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

bapm enabled the GPU and CPU to share TDP headroom.  It was
disabled by default since some laptops hung when it was enabled
in conjunction with dpm.  It seems to be stable on desktop
boards and fixes hangs on boot with dpm enabled on certain
boards, so enable it by default on desktop boards.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=72921Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

bapm allows the GPU and CPU to share TDP.  This allows
for additional performance out of the GPU and CPU when
the headroom is available.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer asics shouldn't need any manual adjustment.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Set the default to 600Mhz if it's not set in the bios,
and bump the default to 600Mhz if it's lower than that.

This fixes display issues with certain 4k DP monitors when
using 5.4 Ghz DP clocks.

v2: fix typo.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Drop WA to fix Voltage not getting dropped to Vmin when Gfx is power
gated for latest VLV revision.

Workaround fixed in Latest VLV revision. Forcing Gfx clk up not needed,
and Requesting the min freq should bring bring the voltage Vnn.

v2: Drop WA for Latest VLV revision (Ville)
Signed-off-by: NDeepak S <deepak.s@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[Jani: modified code comment, reformatted the commit message a bit.]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Apparently we can't trust this field on other platforms and need to find
some other way.

This fixes a regression introduced in
commit 27da3bdf
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Fri Apr 4 16:12:07 2014 -0700

    drm/i915: use VBT to determine whether to enumerate the VGA port
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

BDW signals the flip done interrupt immediately after the DSPSURF write
when the plane is disabled. This is true even if we've already armed
DSPCNTR to enable the plane at the next vblank. This causes major
problems for our page flip code which relies on the flip done interrupts
happening at vblank time.

So what happens is that we enable the plane, and immediately allow
userspace to submit a page flip. If the plane is still in the process
of being enabled when the page flip is issued, the flip done gets
signalled immediately. Our DSPSURFLIVE check catches this to prevent
premature flip completion, but it also means that we don't get a flip
done interrupt when the plane actually gets enabled, and so the page
flip is never completed.

Work around this by re-introducing blocking vblank waits on BDW
whenever we enable the primary plane.

I removed some of the vblank waits here:
 commit 6304cd91
 Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
 Date:   Fri Apr 25 13:30:12 2014 +0300

    drm/i915: Drop the excessive vblank waits from modeset codepaths

To avoid these blocking vblank waits we should start using the vblank
interrupt instead of the flip done interrupt to complete page flips.
But that's material for another patch.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79354Tested-by: NGuo Jinxian <jinxianx.guo@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

The TDA998x can't handle modes with clocks above 150MHz, or resolutions
larger than 8192x2048.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

One of Jean-Francois patches changed the EDID polling to once every
10ms for 10 interations, whereas the original code did 1ms for 100
interations.  This appears to cause boot-time detection to take
noticably longer.  Revert this change.
Acked-by: NJean-Francois Moine <moinejf@free.fr>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Currently tda998x_encoder_destroy() calls cec_write() and reg_clear(),
as part of the release procedure. Such calls need to access the I2C bus
and therefore, we need to call them before drm_i2c_encoder_destroy()
which unregisters the I2C device.

This commit moves the latter so it's done afterwards.
Signed-off-by: NGuido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: NEzequiel García <ezequiel@vanguardiasur.com.ar>
Cc: <stable@vger.kernel.org> #v3.9+
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

For MIPI, DSI PLL is configured separately in vlv_configure_dsi_pll
during the DSI enable sequence

Causing WARN dump otherwise in dpio_reads

v2: Add IS_CHERRYVIEW check as suggested by Ville
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

If user uses wrong ioctl command with _IOC_NONE and argument size
greater than 0, it can cause NULL pointer access from memset of line
463. If _IOC_NONE, don't memset to 0 for kdata.
Signed-off-by: NZhaowei Yuan <zhaowei.yuan@samsung.com>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

mixer_wait_for_vblank function expects that the upcoming
vsync interrupt handler routine will clear the
wait_vsync_event atomic variable.

For this to happen, interrupts should be enabled and
disabled properly.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Mixer soft reset is a recommended step before reconfiguring
the mixer after power on. Mixer looses the previous state of
DMAs if soft reset. This is the recommendation from the
hardware team.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Allowing only one layer update per vsync can cause issues
while there are update available for both layers. There is
a good amount of possibility to loose updates if we allow
single update per vsync.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Fixes an issue whereby we may race with the table updates (before the
core takes the struct_mutex) and so risk dereferencing a stale pointer in
the iterator for /debugfs/.../i915_gem_objects. For example,

[ 1524.757545] BUG: unable to handle kernel paging request at f53af748
[ 1524.757572] IP: [<c1406982>] per_file_stats+0x12/0x100
[ 1524.757599] *pdpt = 0000000001b13001 *pde = 00000000379fb067 *pte = 80000000353af060
[ 1524.757621] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC
[ 1524.757637] Modules linked in: ctr ccm arc4 ath9k ath9k_common ath9k_hw ath snd_hda_codec_conexant mac80211 snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec bnep snd_hwdep rfcomm snd_pcm gpio_ich dell_wmi sparse_keymap snd_seq_midi hid_multitouch uvcvideo snd_seq_midi_event dell_laptop snd_rawmidi dcdbas snd_seq videobuf2_vmalloc videobuf2_memops videobuf2_core usbhid videodev snd_seq_device coretemp snd_timer hid joydev kvm_intel cfg80211 ath3k kvm btusb bluetooth serio_raw snd microcode soundcore lpc_ich wmi mac_hid parport_pc ppdev lp parport psmouse ahci libahci
[ 1524.757825] CPU: 3 PID: 1911 Comm: intel-gpu-overl Tainted: G        W  OE 3.15.0-rc3+ #96
[ 1524.757840] Hardware name: Dell Inc. Inspiron 1090/Inspiron 1090, BIOS A06 08/23/2011
[ 1524.757855] task: f52f36c0 ti: f4cbc000 task.ti: f4cbc000
[ 1524.757869] EIP: 0060:[<c1406982>] EFLAGS: 00210202 CPU: 3
[ 1524.757884] EIP is at per_file_stats+0x12/0x100
[ 1524.757896] EAX: 0000002d EBX: 00000000 ECX: f4cbdefc EDX: f53af700
[ 1524.757909] ESI: c1406970 EDI: f53af700 EBP: f4cbde6c ESP: f4cbde5c
[ 1524.757922]  DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[ 1524.757934] CR0: 80050033 CR2: f53af748 CR3: 356af000 CR4: 000007f0
[ 1524.757945] Stack:
[ 1524.757957]  f4cbdefc 00000000 c1406970 f53af700 f4cbdea8 c12e5f15 f4cbdefc c1406970
[ 1524.757993]  0000ffff f4cbde90 0000002d f5dc5cd0 e4e80438 c1181d59 f4cbded8 f4d89900
[ 1524.758027]  f5631b40 e5131074 c1903f37 f4cbdf28 c14068e6 f52648a0 c1927748 c1903f37
[ 1524.758062] Call Trace:
[ 1524.758084]  [<c1406970>] ? i915_gem_object_info+0x510/0x510
[ 1524.758106]  [<c12e5f15>] idr_for_each+0xa5/0x100
[ 1524.758126]  [<c1406970>] ? i915_gem_object_info+0x510/0x510
[ 1524.758148]  [<c1181d59>] ? seq_vprintf+0x29/0x50
[ 1524.758168]  [<c14068e6>] i915_gem_object_info+0x486/0x510
[ 1524.758189]  [<c11823a6>] seq_read+0xd6/0x380
[ 1524.758208]  [<c116d11d>] ? final_putname+0x1d/0x40
[ 1524.758227]  [<c11822d0>] ? seq_hlist_next_percpu+0x90/0x90
[ 1524.758246]  [<c1163e52>] vfs_read+0x82/0x150
[ 1524.758265]  [<c11645d6>] SyS_read+0x46/0x90
[ 1524.758285]  [<c16b8d8c>] sysenter_do_call+0x12/0x22
[ 1524.758298] Code: f5 8f 2a 00 83 c4 6c 31 c0 5b 5e 5f 5d c3 8d 74 26 00 8d bc 27 00 00 00 00 55 89 e5 57 56 53 83 ec 04 3e 8d 74 26 00 83 41 04 01 <8b> 42 48 01 41 08 8b 42 4c 89 d7 85 c0 75 07 8b 42 60 85 c0 74
[ 1524.758461] EIP: [<c1406982>] per_file_stats+0x12/0x100 SS:ESP 0068:f4cbde5c
[ 1524.758485] CR2: 00000000f53af748
Reported-by: NSam Jansen <sam.jansen@starleaf.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Sam Jansen <sam.jansen@starleaf.com>
Cc: stable@vger.kernel.org
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Fallout from

commit 46470fc9
Author: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Date:   Wed May 21 19:01:06 2014 +0300

    drm/i915: Add null state batch to active list

undid the earlier fix of only marking the ctx as initialised after it is
saved by the hardware during a SET_CONTEXT operation:

commit ad1d2199
Author: Ben Widawsky <benjamin.widawsky@intel.com>
Date:   Sat Dec 28 13:31:49 2013 -0800

    drm/i915: set ctx->initialized only after RCS
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Damien Lespiau <damien.lespiau@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
[Jani: add reference to the earlier fix in the commit messsage.]
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Mixer should be power gated only after it is gracefully stopped.
The recommended sequence is to Stop the mixer and wait till
it enters to IDLE state before gating the clocks and power to
the mixer.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Power state variable holds the state of the mixer device.
Power on and power off functions are toggling these variable
at wrong place.

State variable should be changed to true only after Runtime
PM and clocks are enabled. Else it may result to a situation
where mixer registers are accessed with device power enabled.
Similar logic for poweroff sequence.
Signed-off-by: NRahul Sharma <rahul.sharma@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

The patch disables non-enabled HW windows on applying
configuration, it will allow to clear windows enabled
by bootloader.
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

'exynos_drm_pdev' was not getting unregistered if platform_driver_register()
failed. Fix the ordering to allow this. This also fixes the below warning by
moving the #endif macro. While at it also fix the ordering in the exit function
so that de-registration happens in opposite order of registration.
drivers/gpu/drm/exynos/exynos_drm_drv.c:768:1: warning: label
'err_unregister_pd' defined but not used [-Wunused-label]
Signed-off-by: NSachin Kamat <sachin.kamat@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

We recently changed this function to return a pointer instead of an int
so we need to change this zero to a NULL or Sparse complains:

	drivers/gpu/drm/exynos/exynos_drm_drv.h:346:47:
	warning: Using plain integer as NULL pointer
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

If there is no panel node in DT and instead display timings are provided
directly in FIMD node, there is no panel object created and ctx->panel
becomes NULL. However during Exynos DRM initialization
drm_helper_hpd_irq_event() is called, which in turns calls
exynos_dpi_detect(), which dereferences ctx->panel without a check,
causing a NULL pointer derefrence.

This patch fixes the issue by adding necessary NULL pointer check.
Signed-off-by: NTomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>

This patch resolves page fault issue of Mixer when disabled.

The SFRs of VP and Mixer are updated by Vertical Sync of Timing
generator which is a part of HDMI so the sequence to disable TV
Subsystem should be as following:
	VP -> Mixer -> HDMI

For this, this patch disables Mixer and VP (if used) prior to
disabling HDMI.
Signed-off-by: NInki Dae <inki.dae@samsung.com>

Apparently there are Apple laptops with magic smoke for a VBIOS, which
we fail to find and use. Default to having and setting up backlight in
this case.

This fixes a regression introduced by
commit c675949e
Author: Jani Nikula <jani.nikula@intel.com>
Date:   Wed Apr 9 11:31:37 2014 +0300

    drm/i915: do not setup backlight if not available according to VBT

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=77831Reported-and-tested-by: NMatteo Cypriani <mcy@lm7.fr>
Cc: stable@vger.kernel.org # 3.15+
Reviewed-by: NImre Deak <imre.deak@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

Jesse noticed that the punit communication needed to query the VLV power
well status can cause substantial delays. Since we can query the state
frequently, for example during I2C transfers, maintain a cached version
of the HW state to get rid of this delay.

This fixes at least one reported regression where boot time increased by
~4 seconds due to frequent power well state queries on VLV during eDP
EDID read.

This regression has been introduced in

commit bb4932c4
Author: Imre Deak <imre.deak@intel.com>
Date:   Mon Apr 14 20:24:33 2014 +0300

    drm/i915: vlv: check port power domain instead of only D0 for eDP VDD on
Reported-by: NJesse Barnes <jesse.barnes@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If probe fails after IOMMU is attached, we need to detach in order to
clean up properly.  Before this change, IOMMU faults would occur if the
probe failed (-EPROBE_DEFER).
Signed-off-by: NStephane Viau <sviau@codeaurora.org>
Signed-off-by: NRob Clark <robdclark@gmail.com>

use mm.h definition

Cc: David Airlie <airlied@linux.ie>
Cc: Rob Clark <robdclark@gmail.com>
Signed-off-by: NFabian Frederick <fabf@skynet.be>
Signed-off-by: NRob Clark <robdclark@gmail.com>