We had no more use for this flag after the conversion to io-wq, kill it
off.

Fixes: 561fb04a ("io_uring: replace workqueue usage with io-wq")
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If a request fails, we need to ensure we set REQ_F_FAIL_LINK on it if
REQ_F_LINK is set. Any failure in the chain should break the chain.

We were missing a few spots where this should be done. It might be nice
to generalize this somewhat at some point, as long as we factor in the
fact that failure looks different for each request type.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

As introduced by commit:

ba816ad6 ("io_uring: run dependent links inline if possible")

enable inline dependent link running for poll commands.
io_poll_complete_work() is the most important change, as it allows a
linked sequence of { POLL, READ } (for example) to proceed inline
instead of needing to get punted to another async context. The
submission side only potentially matters for sqthread, but may as well
include that bit.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We don't know what context we'll be called in for cancel, it could very
well be with IRQs disabled already. Use the IRQ saving variants of the
locking primitives.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We now have a list that's appropriate for both kernel and userspace
discussions on io_uring usage and development, add that to the
MAINTAINERS entry.

Also add the io-wq files.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We currently don't have a completion event trace, add one of those. And
to better be able to match up submissions and completions, add user_data
to the submission trace as well.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The callback function of call_rcu() just calls kfree(), so we can use
kfree_rcu() instead of call_rcu() + callback function.
Signed-off-by: NYueHaibing <yuehaibing@huawei.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This internal logic was killed with the conversion to io-wq, so we no
longer have a need for this particular trace. Kill it.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We didn't use -ERESTARTSYS to tell the application layer to restart the
system call, but instead return -EINTR. we can set -EINTR directly when
wakeup by the signal, which can help us save an assignment operation and
comparison operation.
Reviewed-by: NBob Liu <bob.liu@oracle.com>
Signed-off-by: NJackie Liu <liuyun01@kylinos.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This adds support for IORING_OP_ASYNC_CANCEL, which will attempt to
cancel requests that have been punted to async context and are now
in-flight. This works for regular read/write requests to files, as
long as they haven't been started yet. For socket based IO (or things
like accept4(2)), we can cancel work that is already running as well.

To cancel a request, the sqe must have ->addr set to the user_data of
the request it wishes to cancel. If the request is cancelled
successfully, the original request is completed with -ECANCELED
and the cancel request is completed with a result of 0. If the
request was already running, the original may or may not complete
in error. The cancel request will complete with -EALREADY for that
case. And finally, if the request to cancel wasn't found, the cancel
request is completed with -ENOENT.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

syzbot reported an issue where we crash at setup time if failslab is
used. The issue is that io_wq_create() returns an error pointer on
failure, not NULL. Hence io_uring thought the io-wq was setup just
fine, but in reality it's a garbage error pointer.

Use IS_ERR() instead of a NULL check, and assign ret appropriately.

Reported-by: syzbot+221cc24572a2fed23b6b@syzkaller.appspotmail.com
Fixes: 561fb04a ("io_uring: replace workqueue usage with io-wq")
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If we get -1 from hrtimer_try_to_cancel(), we know that the timer
is running. Hence leave all completion to the timeout handler. If
we don't, we can corrupt the list and miss a completion.

Fixes: 11365043 ("io_uring: add support for canceling timeout requests")
Reported-by: NHrvoje Zeba <zeba.hrvoje@gmail.com>
Tested-by: NHrvoje Zeba <zeba.hrvoje@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There's been a few requests for supporting more fixed files than 1024.
This isn't really tricky to do, we just need to split up the file table
into multiple tables and index appropriately. As we do so, reduce the
max single file table to 512. This enables us to do single page allocs
always for the tables, which is an improvement over the situation prior.

This patch adds support for up to 64K files, which should be enough for
everyone.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We index the file tables with a user given value. After we check
it's within our limits, use array_index_nospec() to prevent any
spectre attacks here.
Suggested-by: NJann Horn <jannh@google.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This allows an application to call accept4() in an async fashion. Like
other opcodes, we first try a non-blocking accept, then punt to async
context if we have to.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This is identical to __sys_accept4(), except it takes a struct file
instead of an fd, and it also allows passing in extra file->f_flags
flags. The latter is done to support masking in O_NONBLOCK without
manipulating the original file flags.

No functional changes in this patch.

Cc: netdev@vger.kernel.org
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This is in preparation for adding opcodes that need to add new files
in a process file table, system calls like open(2) or accept4(2).

If an opcode needs this, it must set IO_WQ_WORK_NEEDS_FILES in the work
item. If work that needs to get punted to async context have this
set, the async worker will assume the original task file table before
executing the work.

Note that opcodes that need access to the current files of an
application cannot be done through IORING_SETUP_SQPOLL.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Drop various work-arounds we have for workqueues:

- We no longer need the async_list for tracking sequential IO.

- We don't have to maintain our own mm tracking/setting.

- We don't need a separate workqueue for buffered writes. This didn't
  even work that well to begin with, as it was suboptimal for multiple
  buffered writers on multiple files.

- We can properly cancel pending interruptible work. This fixes
  deadlocks with particularly socket IO, where we cannot cancel them
  when the io_uring is closed. Hence the ring will wait forever for
  these requests to complete, which may never happen. This is different
  from disk IO where we know requests will complete in a finite amount
  of time.

- Due to being able to cancel work interruptible work that is already
  running, we can implement file table support for work. We need that
  for supporting system calls that add to a process file table.

- It gets us one step closer to adding async support for any system
  call.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This adds support for io-wq, a smaller and specialized thread pool
implementation. This is meant to replace workqueues for io_uring. Among
the reasons for this addition are:

- We can assign memory context smarter and more persistently if we
  manage the life time of threads.

- We can drop various work-arounds we have in io_uring, like the
  async_list.

- We can implement hashed work insertion, to manage concurrency of
  buffered writes without needing a) an extra workqueue, or b)
  needlessly making the concurrency of said workqueue very low
  which hurts performance of multiple buffered file writers.

- We can implement cancel through signals, for cancelling
  interruptible work like read/write (or send/recv) to/from sockets.

- We need the above cancel for being able to assign and use file tables
  from a process.

- We can implement a more thorough cancel operation in general.

- We need it to move towards a syslet/threadlet model for even faster
  async execution. For that we need to take ownership of the used
  threads.

This list is just off the top of my head. Performance should be the
same, or better, at least that's what I've seen in my testing. io-wq
supports basic NUMA functionality, setting up a pool per node.

io-wq hooks up to the scheduler schedule in/out just like workqueue
and uses that to drive the need for more/less workers.
Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Commit fb5ccc98 ("io_uring: Fix broken links with offloading")
introduced a potential performance regression with unconditionally
taking mm even for READ/WRITE_FIXED operations.

Return the logic handling it back. mm-faulted requests will go through
the generic submission path, so honoring links and drains, but will
fail further on req->has_user check.

Fixes: fb5ccc98 ("io_uring: Fix broken links with offloading")
Cc: stable@vger.kernel.org # v5.4
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

submit->index is used only for inbound check in submission path (i.e.
head < ctx->sq_entries). However, it always will be true, as
1. it's already validated by io_get_sqring()
2. ctx->sq_entries can't be changedd in between, because of held
ctx->uring_lock and ctx->refs.
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

To trace io_uring activity one can get an information from workqueue and
io trace events, but looks like some parts could be hard to identify via
this approach. Making what happens inside io_uring more transparent is
important to be able to reason about many aspects of it, hence introduce
the set of tracing events.

All such events could be roughly divided into two categories:

* those, that are helping to understand correctness (from both kernel
  and an application point of view). E.g. a ring creation, file
  registration, or waiting for available CQE. Proposed approach is to
  get a pointer to an original structure of interest (ring context, or
  request), and then find relevant events. io_uring_queue_async_work
  also exposes a pointer to work_struct, to be able to track down
  corresponding workqueue events.

* those, that provide performance related information. Mostly it's about
  events that change the flow of requests, e.g. whether an async work
  was queued, or delayed due to some dependencies. Another important
  case is how io_uring optimizations (e.g. registered files) are
  utilized.
Signed-off-by: NDmitrii Dolgov <9erthalion6@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We might have cases where the need for a specific timeout is gone, add
support for canceling an existing timeout operation. This works like the
POLL_REMOVE command, where the application passes in the user_data of
the timeout it wishes to cancel in the sqe->addr field.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This is a pretty trivial addition on top of the relative timeouts
we have now, but it's handy for ensuring tighter timing for those
that are building scheduling primitives on top of io_uring.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

There is no function change, just to clean up the code, use s->in_async
to make the code know where it is.
Signed-off-by: NJackie Liu <liuyun01@kylinos.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We currently size the CQ ring as twice the SQ ring, to allow some
flexibility in not overflowing the CQ ring. This is done because the
SQE life time is different than that of the IO request itself, the SQE
is consumed as soon as the kernel has seen the entry.

Certain application don't need a huge SQ ring size, since they just
submit IO in batches. But they may have a lot of requests pending, and
hence need a big CQ ring to hold them all. By allowing the application
to control the CQ ring size multiplier, we can cater to those
applications more efficiently.

If an application wants to define its own CQ ring size, it must set
IORING_SETUP_CQSIZE in the setup flags, and fill out
io_uring_params->cq_entries. The value must be a power of two.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Allows the application to remove/replace/add files to/from a file set.
Passes in a struct:

struct io_uring_files_update {
	__u32 offset;
	__s32 *fds;
};

that holds an array of fds, size of array passed in through the usual
nr_args part of the io_uring_register() system call. The logic is as
follows:

1) If ->fds[i] is -1, the existing file at i + ->offset is removed from
   the set.
2) If ->fds[i] is a valid fd, the existing file at i + ->offset is
   replaced with ->fds[i].

For case #2, is the existing file is currently empty (fd == -1), the
new fd is simply added to the array.
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This is in preparation for allowing updates to fixed file sets without
requiring a full unregister+register.
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Currently any dependent link is executed from a new workqueue context,
which means that we'll be doing a context switch per link in the chain.
If we are running the completion of the current request from our async
workqueue and find that the next request is a link, then run it directly
from the workqueue context instead of forcing another switch.

This improves the performance of linked SQEs, and reduces the CPU
overhead.
Reviewed-by: NJackie Liu <liuyun01@kylinos.cn>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fixes crashes due to ubd requeue logic conflicting with the block-mq
logic. Crash is reproducible in 5.0 - 5.3.

Fixes: 53766def ("um: Clean-up command processing in UML UBD driver")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: NAnton Ivanov <anton.ivanov@cambridgegreys.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

groups_only mode in nvme_read_ana_log() is no longer used: remove it.
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NAnton Eidelman <anton@lightbitslabs.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The following scenario results in an IO hang:
1) ctrl completes a request with NVME_SC_ANA_TRANSITION.
   NVME_NS_ANA_PENDING bit in ns->flags is set and ana_work is triggered.
2) ana_work: nvme_read_ana_log() tries to get the ANA log page from the ctrl.
   This fails because ctrl disconnects.
   Therefore nvme_update_ns_ana_state() is not called
   and NVME_NS_ANA_PENDING bit in ns->flags is not cleared.
3) ctrl reconnects: nvme_mpath_init(ctrl,...) calls
   nvme_read_ana_log(ctrl, groups_only=true).
   However, nvme_update_ana_state() does not update namespaces
   because nr_nsids = 0 (due to groups_only mode).
4) scan_work calls nvme_validate_ns() finds the ns and re-validates OK.

Result:
The ctrl is now live but NVME_NS_ANA_PENDING bit in ns->flags is still set.
Consequently ctrl will never be considered a viable path by __nvme_find_path().
IO will hang if ctrl is the only or the last path to the namespace.

More generally, while ctrl is reconnecting, its ANA state may change.
And because nvme_mpath_init() requests ANA log in groups_only mode,
these changes are not propagated to the existing ctrl namespaces.
This may result in a mal-function or an IO hang.

Solution:
nvme_mpath_init() will nvme_read_ana_log() with groups_only set to false.
This will not harm the new ctrl case (no namespaces present),
and will make sure the ANA state of namespaces gets updated after reconnect.

Note: Another option would be for nvme_mpath_init() to invoke
nvme_parse_ana_log(..., nvme_set_ns_ana_state) for each existing namespace.
Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
Signed-off-by: NAnton Eidelman <anton@lightbitslabs.com>
Signed-off-by: NKeith Busch <kbusch@kernel.org>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

syzkaller reported an issue where it looks like a malicious app can
trigger a use-after-free of reading the ctx ->sq_array and ->rings
value right after having installed the ring fd in the process file
table.

Defer ring fd installation until after we're done reading those
values.

Fixes: 75b28aff ("io_uring: allocate the two rings together")
Reported-by: syzbot+6f03d895a6cd0d06187f@syzkaller.appspotmail.com
Signed-off-by: NJens Axboe <axboe@kernel.dk>

io_queue_link_head() owns shadow_req after taking it as an argument.
By not freeing it in case of an error, it can leak the request along
with taken ctx->refs.
Reviewed-by: NJackie Liu <liuyun01@kylinos.cn>
Signed-off-by: NPavel Begunkov <asml.silence@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Pull x86 fixes from Thomas Gleixner:
 "Two fixes for the VMWare guest support:

   - Unbreak VMWare platform detection which got wreckaged by converting
     an integer constant to a string constant.

   - Fix the clang build of the VMWAre hypercall by explicitely
     specifying the ouput register for INL instead of using the short
     form"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/cpu/vmware: Fix platform detection VMWARE_PORT macro
  x86/cpu/vmware: Use the full form of INL in VMWARE_HYPERCALL, for clang/llvm

Pull timer fixes from Thomas Gleixner:
 "A small set of fixes for time(keeping):

   - Add a missing include to prevent compiler warnings.

   - Make the VDSO implementation of clock_getres() POSIX compliant
     again. A recent change dropped the NULL pointer guard which is
     required as NULL is a valid pointer value for this function.

   - Fix two function documentation typos"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Fix two trivial comments
  timers/sched_clock: Include local timekeeping.h for missing declarations
  lib/vdso: Make clock_getres() POSIX compliant again

Pull perf fixes from Thomas Gleixner:
 "A set of perf fixes:

  kernel:

   - Unbreak the tracking of auxiliary buffer allocations which got
     imbalanced causing recource limit failures.

   - Fix the fallout of splitting of ToPA entries which missed to shift
     the base entry PA correctly.

   - Use the correct context to lookup the AUX event when unmapping the
     associated AUX buffer so the event can be stopped and the buffer
     reference dropped.

  tools:

   - Fix buildiid-cache mode setting in copyfile_mode_ns() when copying
     /proc/kcore

   - Fix freeing id arrays in the event list so the correct event is
     closed.

   - Sync sched.h anc kvm.h headers with the kernel sources.

   - Link jvmti against tools/lib/ctype.o to have weak strlcpy().

   - Fix multiple memory and file descriptor leaks, found by coverity in
     perf annotate.

   - Fix leaks in error handling paths in 'perf c2c', 'perf kmem', found
     by a static analysis tool"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/aux: Fix AUX output stopping
  perf/aux: Fix tracking of auxiliary trace buffer allocation
  perf/x86/intel/pt: Fix base for single entry topa
  perf kmem: Fix memory leak in compact_gfp_flags()
  tools headers UAPI: Sync sched.h with the kernel
  tools headers kvm: Sync kvm.h headers with the kernel sources
  tools headers kvm: Sync kvm headers with the kernel sources
  tools headers kvm: Sync kvm headers with the kernel sources
  perf c2c: Fix memory leak in build_cl_output()
  perf tools: Fix mode setting in copyfile_mode_ns()
  perf annotate: Fix multiple memory and file descriptor leaks
  perf tools: Fix resource leak of closedir() on the error paths
  perf evlist: Fix fix for freed id arrays
  perf jvmti: Link against tools/lib/ctype.h to have weak strlcpy()

Pull irq fixes from Thomas Gleixner:
 "Two fixes for interrupt controller drivers:

   - Skip IRQ_M_EXT entries in the device tree when initializing the
     RISCV PLIC controller to avoid a double init attempt.

   - Use the correct ITS list when issuing the VMOVP synchronization
     command so the operation works only on the ITS instances which are
     associated to a VM"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/sifive-plic: Skip contexts except supervisor in plic_init()
  irqchip/gic-v3-its: Use the exact ITSList for VMOVP

Pull cifs fixes from Steve French:
 "Seven cifs/smb3 fixes, including three for stable"

* tag '5.4-rc5-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Fix cifsInodeInfo lock_sem deadlock when reconnect occurs
  CIFS: Fix use after free of file info structures
  CIFS: Fix retry mid list corruption on reconnects
  cifs: Fix missed free operations
  CIFS: avoid using MID 0xFFFF
  cifs: clarify comment about timestamp granularity for old servers
  cifs: Handle -EINPROGRESS only when noblockcnt is set