Move the handling of SiI1392 HDMI codec from patch_atihdmi.c to
patch_intelhdmi.c, which makes our ASUS P5E-VM HDMI board work.
Signed-off-by: NWu Fengguang <wfg@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Due to the recent change for multiple HP as line-out switch, only
one of the multiple headphons (usually a wrong one) is toggled
and the other pins are still disabled.  This causes the silent output
problem on some Dell laptops.

Also, the hp_switch check is screwed up when a line-in or a mic-in
jack exists.  This is added as an additional output, but hp_switch
check doesn't take it into account.

This patch fixes these issues: simplify hp_switch check by using
the NID instead of bool, and clean up / fix the toggle of HP pins
in unsol event handler code.

Reference: Novell bnc#443267
	https://bugzilla.novell.com/show_bug.cgi?id=443267Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The input pins are sometimes not initialized properly because
of the optimization check of the current pinctl code.

Force to initialize the mic input pins so that they can be set up
properly even if they were in a weird state.  But keep other input
pins if already set up as input, since this could be an extra mic
pin.

Reference: Novell bnc#443738
	https://bugzilla.novell.com/show_bug.cgi?id=443738Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The creation of analog-mux mixer element is missing in
patch_stac9200() due to the dynamic allocation patch.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a QUIRK to patch_analog.c for the HP Elitebook 8530p
(IDs 0x103c:0x30e7) to use AD1884A model 'laptop' by default.
Playback and Capture confirmed working.
Signed-off-by: NTravis Place <wishie@wishie.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Fix another silly bug in the amp cache list management.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added model=laptop for another HP machine (103c:3614) with AD1884A
codec.
Signed-off-by: NMichel Marti <mma@objectxp.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

BIOS on Dell Studio Desktop tells wrong codec probe masks.
This patch gives the preset mask value to avoid invalid access.
Reference: Novell bug#440907
	https://bugzilla.novell.com/show_bug.cgi?id=440907Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The master switch doesn't influence on NID 0x15, the headphone jack
on HP 3013 model because alc260_hp_master_update() ignores the passed
arguments.

Also, corrected the wrong arguments of hp3013 (0x10 and 0x15) although
this doesn't change any behavior.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The chaining for amp hash got broken due to the rewrite with
snd_array.  Fixed now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a check for max allocation size in snd_array_new() for a
debugging purpose.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added the missing NULL check from allocator in get_alloc_hash().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The widget layout of the Fujitsu Lifebook S6420 (which is ICH9M-based
and uses an ALC269) is similar but not identical to the Lifebook
S6410/E8410 (which are ICH8M-based and use an ALC262).

It is named lifebook as fujitsu is in use for Amilo machines. This builds
on the Quanta FL1 work and supports all analog inputs & outputs that I am
aware of.  Microphone autoswitch is implemented. The laptop mic port takes
precedence over the dock mic port if both happen to have a jack plugged in.
This made sense to me as a design decision (imagine a presentation
environment with the dock fully wired in and the presenter quickly wanting
to override the mic with a headset).

There is mention of a digital audio path on the codec graph, so perhaps
the headphone socket is dual-function analog/digital. I will follow up
with another patch if I can acquire equipment to test this.
Signed-off-by: NTony Vroon <tony@linx.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

When an error occurs during the codec probing, typically accessing to an
non-existing codec slot, the controller chip gets often screwed up and
can no longer communicate with the codecs.

This patch adds a preparation phase just to probe codec addresses before
actually creating codec instances.  If any error occurs during this
probing phase, the driver resets the controller to recover.

This will (hopefully) fix the famous "single_cmd" errors.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The hda_bus ops callback take struct hda_bus pointer.
Also, the command callback takes the composed command word, instead of
each small bits in arguments.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There are actually two variants of ALC268 Acer implementation, one
with an analog built-in mic (pin 0x19) and another with a digital
mic (pin 0x12).  Created a new model, acer-dmic, for the latter case
now.

So far, all known models are assigned to be analog-mic, according to
the BIOS setup.  If this doesn't match with the actual case, one needs
to try model=acer-dmic, and fix the entry to point ALC268_ACER_DMIC
if it works.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use model=lenovo-ms7195-dig for MEDION MD96630 laptop (17c0:4085)
with ALC888 codec.
Reference: Novell bnc#412548
	https://bugzilla.novell.com/show_bug.cgi?id=412528Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Asus V1s series laptops have an ALC660VD with PCI id: 0x1043, 0x1633.
1.) remove the previous behaviour of mapping that to the ALC861VD_LENOVO
    device.
2.) add a new ALC660VD_V1S device based on ALC861VD_LENOVO, with an
    added digital out.
Signed-off-by: NTristan Aston <astrotris@gmail.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a proper ifdef to shut out a compile warning:
   CC [M]  sound/pci/hda/patch_intelhdmi.o
sound/pci/hda/patch_intelhdmi.c:286: warning: ‘hdmi_get_dip_index’ defined but \
not used
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add support for Intel G45 integrated HDMI audio codecs.

This initial release supports:
	- 2 channel stereo sound output
	- report monitor's ELD information
Signed-off-by: NWu Fengguang <wfg@linux.intel.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Due to the hda-reconfiguration patches, the check of empty stream
is gone, and this results in an error with the codec setup with empty
streams.

This patch adds the check again to avoid the error at probing.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Limit the number of GPIOs shown in proc.  Otherwise it gets too long
unnecessarily, and hard to analyze.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add NULL-check of the return value of snd_kctl_new1() before
accessing it.  Also, make a sanity NULL check to snd_BUG_ON()
for debugging only.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The commit f9e336f6
    ALSA: hda - Unify capture mixer creation in realtek codes
removed the ADC check for ALC260 auto-probe mode accidentally.
Re-added to patch_alc260() again.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a preset model for FSC Amilo with ALC269 codec chip.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add support for explicitly enabling the EQ distortion hack for
systems without software biquad support.
Signed-off-by: NMatthew Ranostay <mranostay@embeddedalley.com>
Cc: stable@kernel.org
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a quirk for another Acer Aspier laptop (1025:0090) with ALC883
codec.  Reported in Novell bnc#426935:
    https://bugzilla.novell.com/show_bug.cgi?id=426935Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Re-added again "Input Source" control that was removed mistakenly
in the previous patchset.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Unified the capture mixer creation in patch_realtek.c.

ALC268 is still an exception since it has no AMP in ADC but in
MUX widget.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Unify the capture callbacks in patch_realtek.c.
The difference of matrix or mux style is checked via spec->is_mix_capture
flag.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use macro to add mixer and verb elements to check the possible
array overflow.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The digital mic wasn't detected properly for ALC269 auto-probing mode
because of its widget number.  Fixed now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The recent addition of automatic mic-muting is broken in some cases.
The code assumes that the pin nids <= 0x18, but the digital pins can
be less than 0x18.
Also, it assumes the front-mic being the internal mic, but it depends
on the hardware implementation actually.

Instead of complex case-fixes, better to disable the code as now.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The current snd-hda-intel driver seems blocking the power-off on some
devices like eeepc.  Although this is likely a BIOS problem, we can add
a workaround by disabling IRQ lines before power-off operation.
This patch adds the reboot notifier to achieve it.

The detailed problem description is found in bug#11889:
    http://bugme.linux-foundation.org/show_bug.cgi?id=11889Tested-by: NLuiz Fernando N. Capitulino <lcapitulino@mandriva.com.br>
Cc: stable@kernel.org
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Just cosmetic fixes of spacing that annoyed me.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The SPDIF mute switch code seems broken.  It doesn't set unmute bits
properly.  Also it contains the duplicated lines (merge error?) to be
cleaned up.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add Wolfson Microelectronics to the HDA vendor ID table.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Added a quirk entry for another HP mobile device with AD1884A codec.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Removed the old workaround to avoid the non-existing codec slot.
The current code should work without that workaround.  If any,
we can add a quirk table.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Some machines have broken BIOS resume that doesn't restore the default
pin configuration properly, which results in a wrong detection of HP
pin.  This causes a silent speaker output due to missing HP detection.
Related bug: Novell bug#406101
	https://bugzilla.novell.com/show_bug.cgi?id=406101

This patch fixes the issue by saving/restoring the default pin configs
by the driver itself.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>