In some cases initial bind of scm memory for an lpar can fail if
previously it wasn't released using a scm-unbind hcall. This situation
can arise due to panic of the previous kernel or forced lpar
fadump. In such cases the H_SCM_BIND_MEM return a H_OVERLAP error.

To mitigate such cases the patch updates papr_scm_probe() to force a
call to drc_pmem_unbind() in case the initial bind of scm memory fails
with EBUSY error. In case scm-bind operation again fails after the
forced scm-unbind then we follow the existing error path. We also
update drc_pmem_bind() to handle the H_OVERLAP error returned by phyp
and indicate it as a EBUSY error back to the caller.
Suggested-by: N"Oliver O'Halloran" <oohall@gmail.com>
Signed-off-by: NVaibhav Jain <vaibhav@linux.ibm.com>
Reviewed-by: NOliver O'Halloran <oohall@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190629160610.23402-4-vaibhav@linux.ibm.com

The new hcall named H_SCM_UNBIND_ALL has been introduce that can
unbind all or specific scm memory assigned to an lpar. This is
more efficient than using H_SCM_UNBIND_MEM as currently we don't
support partial unbind of scm memory.

Hence this patch proposes following changes to drc_pmem_unbind():

    * Update drc_pmem_unbind() to replace hcall H_SCM_UNBIND_MEM to
      H_SCM_UNBIND_ALL.

    * Update drc_pmem_unbind() to handles cases when PHYP asks the guest
      kernel to wait for specific amount of time before retrying the
      hcall via the 'LONG_BUSY' return value.

    * Ensure appropriate error code is returned back from the function
      in case of an error.
Reviewed-by: NOliver O'Halloran <oohall@gmail.com>
Signed-off-by: NVaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190629160610.23402-3-vaibhav@linux.ibm.com

Update the hvcalls.h to include op-codes for new hcalls introduce to
manage SCM memory. Also update existing hcall definitions to reflect
current papr specification for SCM.

The removed hcall op-codes H_SCM_MEM_QUERY, H_SCM_BLOCK_CLEAR were
transient proposals and there support was never implemented by
Power-VM nor they were used anywhere in Linux kernel. Hence we don't
expect anyone to be impacted by this change.
Signed-off-by: NVaibhav Jain <vaibhav@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190629160610.23402-2-vaibhav@linux.ibm.com

On systems like P9 powernv where we have no TM (or P8 booted with
ppc_tm=off), userspace can construct a signal context which still has
the MSR TS bits set. The kernel tries to restore this context which
results in the following crash:

  Unexpected TM Bad Thing exception at c0000000000022fc (msr 0x8000000102a03031) tm_scratch=800000020280f033
  Oops: Unrecoverable exception, sig: 6 [#1]
  LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in:
  CPU: 0 PID: 1636 Comm: sigfuz Not tainted 5.2.0-11043-g0a8ad0ff #69
  NIP:  c0000000000022fc LR: 00007fffb2d67e48 CTR: 0000000000000000
  REGS: c00000003fffbd70 TRAP: 0700   Not tainted  (5.2.0-11045-g7142b497d8)
  MSR:  8000000102a03031 <SF,VEC,VSX,FP,ME,IR,DR,LE,TM[E]>  CR: 42004242  XER: 00000000
  CFAR: c0000000000022e0 IRQMASK: 0
  GPR00: 0000000000000072 00007fffb2b6e560 00007fffb2d87f00 0000000000000669
  GPR04: 00007fffb2b6e728 0000000000000000 0000000000000000 00007fffb2b6f2a8
  GPR08: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
  GPR12: 0000000000000000 00007fffb2b76900 0000000000000000 0000000000000000
  GPR16: 00007fffb2370000 00007fffb2d84390 00007fffea3a15ac 000001000a250420
  GPR20: 00007fffb2b6f260 0000000010001770 0000000000000000 0000000000000000
  GPR24: 00007fffb2d843a0 00007fffea3a14a0 0000000000010000 0000000000800000
  GPR28: 00007fffea3a14d8 00000000003d0f00 0000000000000000 00007fffb2b6e728
  NIP [c0000000000022fc] rfi_flush_fallback+0x7c/0x80
  LR [00007fffb2d67e48] 0x7fffb2d67e48
  Call Trace:
  Instruction dump:
  e96a0220 e96a02a8 e96a0330 e96a03b8 394a0400 4200ffdc 7d2903a6 e92d0c00
  e94d0c08 e96d0c10 e82d0c18 7db242a6 <4c000024> 7db243a6 7db142a6 f82d0c18

The problem is the signal code assumes TM is enabled when
CONFIG_PPC_TRANSACTIONAL_MEM is enabled. This may not be the case as
with P9 powernv or if `ppc_tm=off` is used on P8.

This means any local user can crash the system.

Fix the problem by returning a bad stack frame to the user if they try
to set the MSR TS bits with sigreturn() on systems where TM is not
supported.

Found with sigfuz kernel selftest on P9.

This fixes CVE-2019-13648.

Fixes: 2b0a576d ("powerpc: Add new transactional memory state to the signal context")
Cc: stable@vger.kernel.org # v3.9
Reported-by: NPraveen Pandey <Praveen.Pandey@in.ibm.com>
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190719050502.405-1-mikey@neuling.org

The refactor of powerpc DMA functions in commit 6666cc17
("powerpc/dma: remove dma_nommu_mmap_coherent") incorrectly
changes the way DMA mappings are handled on powerpc.
Since this change, all mapped pages are marked as cache-inhibited
through the default implementation of arch_dma_mmap_pgprot.
This differs from the previous behavior of only marking pages
in noncoherent mappings as cache-inhibited and has resulted in
sporadic system crashes in certain hardware configurations and
workloads (see Bugzilla).

This commit restores the previous correct behavior by providing
an implementation of arch_dma_mmap_pgprot that only marks
pages in noncoherent mappings as cache-inhibited. As this behavior
should be universal for all powerpc platforms a new file,
dma-generic.c, was created to store it.

Fixes: 6666cc17 ("powerpc/dma: remove dma_nommu_mmap_coherent")
# NOTE: fixes commit 6666cc17 released in v5.1.
# Consider a stable tag:
# Cc: stable@vger.kernel.org # v5.1+
# NOTE: fixes commit 6666cc17 released in v5.1.
# Consider a stable tag:
# Cc: stable@vger.kernel.org # v5.1+
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: NShawn Anastasio <shawn@anastas.io>
Reviewed-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190717235437.12908-1-shawn@anastas.io

The XIVE device structure is now allocated in kvmppc_xive_get_device()
and kfree'd in kvmppc_core_destroy_vm(). In case of an OPAL error when
allocating the XIVE VPs, the kfree() call in kvmppc_xive_*create()
will result in a double free and corrupt the host memory.

Fixes: 5422e951 ("KVM: PPC: Book3S HV: XIVE: Replace the 'destroy' method by a 'release' method")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Tested-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/6ea6998b-a890-2511-01d1-747d7621eb19@kaod.org

xive_find_target_in_mask() has the following for(;;) loop which has a
bug when @first == cpumask_first(@mask) and condition 1 fails to hold
for every CPU in @mask. In this case we loop forever in the for-loop.

  first = cpu;
  for (;;) {
  	  if (cpu_online(cpu) && xive_try_pick_target(cpu)) // condition 1
		  return cpu;
	  cpu = cpumask_next(cpu, mask);
	  if (cpu == first) // condition 2
		  break;

	  if (cpu >= nr_cpu_ids) // condition 3
		  cpu = cpumask_first(mask);
  }

This is because, when @first == cpumask_first(@mask), we never hit the
condition 2 (cpu == first) since prior to this check, we would have
executed "cpu = cpumask_next(cpu, mask)" which will set the value of
@cpu to a value greater than @first or to nr_cpus_ids. When this is
coupled with the fact that condition 1 is not met, we will never exit
this loop.

This was discovered by the hard-lockup detector while running LTP test
concurrently with SMT switch tests.

 watchdog: CPU 12 detected hard LOCKUP on other CPUs 68
 watchdog: CPU 12 TB:85587019220796, last SMP heartbeat TB:85578827223399 (15999ms ago)
 watchdog: CPU 68 Hard LOCKUP
 watchdog: CPU 68 TB:85587019361273, last heartbeat TB:85576815065016 (19930ms ago)
 CPU: 68 PID: 45050 Comm: hxediag Kdump: loaded Not tainted 4.18.0-100.el8.ppc64le #1
 NIP:  c0000000006f5578 LR: c000000000cba9ec CTR: 0000000000000000
 REGS: c000201fff3c7d80 TRAP: 0100   Not tainted  (4.18.0-100.el8.ppc64le)
 MSR:  9000000002883033 <SF,HV,VEC,VSX,FP,ME,IR,DR,RI,LE>  CR: 24028424  XER: 00000000
 CFAR: c0000000006f558c IRQMASK: 1
 GPR00: c0000000000afc58 c000201c01c43400 c0000000015ce500 c000201cae26ec18
 GPR04: 0000000000000800 0000000000000540 0000000000000800 00000000000000f8
 GPR08: 0000000000000020 00000000000000a8 0000000080000000 c00800001a1beed8
 GPR12: c0000000000b1410 c000201fff7f4c00 0000000000000000 0000000000000000
 GPR16: 0000000000000000 0000000000000000 0000000000000540 0000000000000001
 GPR20: 0000000000000048 0000000010110000 c00800001a1e3780 c000201cae26ed18
 GPR24: 0000000000000000 c000201cae26ed8c 0000000000000001 c000000001116bc0
 GPR28: c000000001601ee8 c000000001602494 c000201cae26ec18 000000000000001f
 NIP [c0000000006f5578] find_next_bit+0x38/0x90
 LR [c000000000cba9ec] cpumask_next+0x2c/0x50
 Call Trace:
 [c000201c01c43400] [c000201cae26ec18] 0xc000201cae26ec18 (unreliable)
 [c000201c01c43420] [c0000000000afc58] xive_find_target_in_mask+0x1b8/0x240
 [c000201c01c43470] [c0000000000b0228] xive_pick_irq_target.isra.3+0x168/0x1f0
 [c000201c01c435c0] [c0000000000b1470] xive_irq_startup+0x60/0x260
 [c000201c01c43640] [c0000000001d8328] __irq_startup+0x58/0xf0
 [c000201c01c43670] [c0000000001d844c] irq_startup+0x8c/0x1a0
 [c000201c01c436b0] [c0000000001d57b0] __setup_irq+0x9f0/0xa90
 [c000201c01c43760] [c0000000001d5aa0] request_threaded_irq+0x140/0x220
 [c000201c01c437d0] [c00800001a17b3d4] bnx2x_nic_load+0x188c/0x3040 [bnx2x]
 [c000201c01c43950] [c00800001a187c44] bnx2x_self_test+0x1fc/0x1f70 [bnx2x]
 [c000201c01c43a90] [c000000000adc748] dev_ethtool+0x11d8/0x2cb0
 [c000201c01c43b60] [c000000000b0b61c] dev_ioctl+0x5ac/0xa50
 [c000201c01c43bf0] [c000000000a8d4ec] sock_do_ioctl+0xbc/0x1b0
 [c000201c01c43c60] [c000000000a8dfb8] sock_ioctl+0x258/0x4f0
 [c000201c01c43d20] [c0000000004c9704] do_vfs_ioctl+0xd4/0xa70
 [c000201c01c43de0] [c0000000004ca274] sys_ioctl+0xc4/0x160
 [c000201c01c43e30] [c00000000000b388] system_call+0x5c/0x70
 Instruction dump:
 78aad182 54a806be 3920ffff 78a50664 794a1f24 7d294036 7d43502a 7d295039
 4182001c 48000034 78a9d182 79291f24 <7d23482a> 2fa90000 409e0020 38a50040

To fix this, move the check for condition 2 after the check for
condition 3, so that we are able to break out of the loop soon after
iterating through all the CPUs in the @mask in the problem case. Use
do..while() to achieve this.

Fixes: 243e2511 ("powerpc/xive: Native exploitation of the XIVE interrupt controller")
Cc: stable@vger.kernel.org # v4.12+
Reported-by: NIndira P. Joga <indira.priya@in.ibm.com>
Signed-off-by: NGautham R. Shenoy <ego@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1563359724-13931-1-git-send-email-ego@linux.vnet.ibm.com

25078dc1 first introduced an off by
one error in the ZONE_DMA initialization of PPC_BOOK3E_64=y and since
9739ab7e the off by one applies to
PPC32=y too. This simply corrects the off by one and should resolve
crashes like below:

[   65.179101] page 0x7fff outside node 0 zone DMA [ 0x0 - 0x7fff ]

Unfortunately in various MM places "max" means a non inclusive end of
range. free_area_init_nodes max_zone_pfn parameter is one case and
MAX_ORDER is another one (unrelated) that comes by memory.
Reported-by: NZorro Lang <zlang@redhat.com>
Fixes: 25078dc1 ("powerpc: use mm zones more sensibly")
Fixes: 9739ab7e ("powerpc: enable a 30-bit ZONE_DMA for 32-bit pmac")
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190625141727.2883-1-aarcange@redhat.com

The Performance Stop Status and Control Register (PSSCR) is used to
control the power saving facilities of the processor. This register
has various fields, some of which can be modified only in hypervisor
state, and others which can be modified in both hypervisor and
privileged non-hypervisor state. The bits which can be modified in
privileged non-hypervisor state are referred to as guest visible.

Currently the L0 hypervisor saves and restores both it's own host
value as well as the guest value of the PSSCR when context switching
between the hypervisor and guest. However a nested hypervisor running
it's own nested guests (as indicated by kvmhv_on_pseries()) doesn't
context switch the PSSCR register. That means if a nested (L2) guest
modifies the PSSCR then the L1 guest hypervisor will run with that
modified value, and if the L1 guest hypervisor modifies the PSSCR and
then goes to run the nested (L2) guest again then the L2 PSSCR value
will be lost.

Fix this by having the (L1) nested hypervisor save and restore both
its host and the guest PSSCR value when entering and exiting a
nested (L2) guest. Note that only the guest visible parts of the PSSCR
are context switched since this is all the L1 nested hypervisor can
access, this is fine however as these are the only fields the L0
hypervisor provides guest control of anyway and so all other fields
are ignored.

This could also have been implemented by adding the PSSCR register to
the hv_regs passed to the L0 hypervisor as input to the H_ENTER_NESTED
hcall, however this would have meant updating the structure layout and
thus required modifications to both the L0 and L1 kernels. Whereas the
approach used doesn't require L0 kernel modifications while achieving
the same result.

Fixes: 95a6432c ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190703012022.15644-3-sjitindarsingh@gmail.com

The ability to run nested guests under KVM means that a guest can also
act as a hypervisor for it's own nested guest. Currently
ppc_set_pmu_inuse() assumes that either FW_FEATURE_LPAR is set,
indicating a guest environment, and so sets the pmcregs_in_use flag in
the lppaca, or that it isn't set, indicating a hypervisor environment,
and so sets the pmcregs_in_use flag in the paca.

The pmcregs_in_use flag in the lppaca is used to communicate this
information to a hypervisor and so must be set in a guest environment.
The pmcregs_in_use flag in the paca is used by KVM code to determine
whether the host state of the performance monitoring unit (PMU) must
be saved and restored when running a guest.

Thus when a guest also acts as a hypervisor it must set this bit in
both places since it needs to ensure both that the real hypervisor
saves it's PMU registers when it runs (requires pmcregs_in_use flag in
lppaca), and that it saves it's own PMU registers when running a
nested guest (requires pmcregs_in_use flag in paca).

Modify ppc_set_pmu_inuse() so that the pmcregs_in_use bit is set in
both the lppaca and the paca when a guest (LPAR) is running with the
capability of running it's own guests (CONFIG_KVM_BOOK3S_HV_POSSIBLE).

Fixes: 95a6432c ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190703012022.15644-2-sjitindarsingh@gmail.com

The performance monitoring unit (PMU) registers are saved on guest
exit when the guest has set the pmcregs_in_use flag in its lppaca, if
it exists, or unconditionally if it doesn't. If a nested guest is
being run then the hypervisor doesn't, and in most cases can't, know
if the PMU registers are in use since it doesn't know the location of
the lppaca for the nested guest, although it may have one for its
immediate guest. This results in the values of these registers being
lost across nested guest entry and exit in the case where the nested
guest was making use of the performance monitoring facility while it's
nested guest hypervisor wasn't.

Further more the hypervisor could interrupt a guest hypervisor between
when it has loaded up the PMU registers and it calling H_ENTER_NESTED
or between returning from the nested guest to the guest hypervisor and
the guest hypervisor reading the PMU registers, in
kvmhv_p9_guest_entry(). This means that it isn't sufficient to just
save the PMU registers when entering or exiting a nested guest, but
that it is necessary to always save the PMU registers whenever a guest
is capable of running nested guests to ensure the register values
aren't lost in the context switch.

Ensure the PMU register values are preserved by always saving their
value into the vcpu struct when a guest is capable of running nested
guests.

This should have minimal performance impact however any impact can be
avoided by booting a guest with "-machine pseries,cap-nested-hv=false"
on the qemu commandline.

Fixes: 95a6432c ("KVM: PPC: Book3S HV: Streamlined guest entry/exit path on P9 for radix guests")
Cc: stable@vger.kernel.org # v4.20+
Signed-off-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190703012022.15644-1-sjitindarsingh@gmail.com

The virtual real mode addressing (VRMA) mechanism is used when a
partition is using HPT (Hash Page Table) translation and performs real
mode accesses (MSR[IR|DR] = 0) in non-hypervisor mode. In this mode
effective address bits 0:23 are treated as zero (i.e. the access is
aliased to 0) and the access is performed using an implicit 1TB SLB
entry.

The size of the RMA (Real Memory Area) is communicated to the guest as
the size of the first memory region in the device tree. And because of
the mechanism described above can be expected to not exceed 1TB. In
the event that the host erroneously represents the RMA as being larger
than 1TB, guest accesses in real mode to memory addresses above 1TB
will be aliased down to below 1TB. This means that a memory access
performed in real mode may differ to one performed in virtual mode for
the same memory address, which would likely have unintended
consequences.

To avoid this outcome have the guest explicitly limit the size of the
RMA to the current maximum, which is 1TB. This means that even if the
first memory block is larger than 1TB, only the first 1TB should be
accessed in real mode.

Fixes: c610d65c ("powerpc/pseries: lift RTAS limit for hash")
Cc: stable@vger.kernel.org # v4.16+
Signed-off-by: NSuraj Jitindar Singh <sjitindarsingh@gmail.com>
Tested-by: NSatheesh Rajendran <sathnaga@linux.vnet.ibm.com>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20190710052018.14628-1-sjitindarsingh@gmail.com

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Removal of the NPU DMA code, used by the out-of-tree Nvidia driver,
     as well as some other functions only used by drivers that haven't
     (yet?) made it upstream.

   - A fix for a bug in our handling of hardware watchpoints (eg. perf
     record -e mem: ...) which could lead to register corruption and
     kernel crashes.

   - Enable HAVE_ARCH_HUGE_VMAP, which allows us to use large pages for
     vmalloc when using the Radix MMU.

   - A large but incremental rewrite of our exception handling code to
     use gas macros rather than multiple levels of nested CPP macros.

  And the usual small fixes, cleanups and improvements.

  Thanks to: Alastair D'Silva, Alexey Kardashevskiy, Andreas Schwab,
  Aneesh Kumar K.V, Anju T Sudhakar, Anton Blanchard, Arnd Bergmann,
  Athira Rajeev, Cédric Le Goater, Christian Lamparter, Christophe
  Leroy, Christophe Lombard, Christoph Hellwig, Daniel Axtens, Denis
  Efremov, Enrico Weigelt, Frederic Barrat, Gautham R. Shenoy, Geert
  Uytterhoeven, Geliang Tang, Gen Zhang, Greg Kroah-Hartman, Greg Kurz,
  Gustavo Romero, Krzysztof Kozlowski, Madhavan Srinivasan, Masahiro
  Yamada, Mathieu Malaterre, Michael Neuling, Nathan Lynch, Naveen N.
  Rao, Nicholas Piggin, Nishad Kamdar, Oliver O'Halloran, Qian Cai, Ravi
  Bangoria, Sachin Sant, Sam Bobroff, Satheesh Rajendran, Segher
  Boessenkool, Shaokun Zhang, Shawn Anastasio, Stewart Smith, Suraj
  Jitindar Singh, Thiago Jung Bauermann, YueHaibing"

* tag 'powerpc-5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (163 commits)
  powerpc/powernv/idle: Fix restore of SPRN_LDBAR for POWER9 stop state.
  powerpc/eeh: Handle hugepages in ioremap space
  ocxl: Update for AFU descriptor template version 1.1
  powerpc/boot: pass CONFIG options in a simpler and more robust way
  powerpc/boot: add {get, put}_unaligned_be32 to xz_config.h
  powerpc/irq: Don't WARN continuously in arch_local_irq_restore()
  powerpc/module64: Use symbolic instructions names.
  powerpc/module32: Use symbolic instructions names.
  powerpc: Move PPC_HA() PPC_HI() and PPC_LO() to ppc-opcode.h
  powerpc/module64: Fix comment in R_PPC64_ENTRY handling
  powerpc/boot: Add lzo support for uImage
  powerpc/boot: Add lzma support for uImage
  powerpc/boot: don't force gzipped uImage
  powerpc/8xx: Add microcode patch to move SMC parameter RAM.
  powerpc/8xx: Use IO accessors in microcode programming.
  powerpc/8xx: replace #ifdefs by IS_ENABLED() in microcode.c
  powerpc/8xx: refactor programming of microcode CPM params.
  powerpc/8xx: refactor printing of microcode patch name.
  powerpc/8xx: Refactor microcode write
  powerpc/8xx: refactor writing of CPM microcode arrays
  ...

Pull sparc updates from David Miller:
 "Just a few small changes:

   - Fix console naming inconsistency with hypervisor consoles, from
     John Paul Adrian Glaubitz

   - Fix userland compilation due to use of u_int, from Masahiro Yamada"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Add missing newline at end of file
  sparc: fix unknown type name u_int in uapi header
  sparc: configs: Remove useless UEVENT_HELPER_PATH
  sparc: Remove redundant copy of the LGPL-2.0
  sunhv: Fix device naming inconsistency between sunhv_console and sunhv_reg

Pull networking fixes from David Miller:

 1) Fix excessive stack usage in cxgb4, from Arnd Bergmann.

 2) Missing skb queue lock init in tipc, from Chris Packham.

 3) Fix some regressions in ipv6 flow label handling, from Eric Dumazet.

 4) Elide flow dissection of local packets in FIB rules, from Petar
    Penkov.

 5) Fix TLS support build failure in mlx5, from Tariq Toukab.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (36 commits)
  ppp: mppe: Revert "ppp: mppe: Add softdep to arc4"
  net: dsa: qca8k: replace legacy gpio include
  net: hisilicon: Use devm_platform_ioremap_resource
  cxgb4: reduce kernel stack usage in cudbg_collect_mem_region()
  tipc: ensure head->lock is initialised
  tc-tests: updated skbedit tests
  nfp: flower: ensure ip protocol is specified for L4 matches
  nfp: flower: fix ethernet check on match fields
  net/mlx5e: Provide cb_list pointer when setting up tc block on rep
  net: phy: make exported variables non-static
  net: sched: Fix NULL-pointer dereference in tc_indr_block_ing_cmd()
  davinci_cpdma: don't cast dma_addr_t to pointer
  net: openvswitch: do not update max_headroom if new headroom is equal to old headroom
  net/mlx5e: Convert single case statement switch statements into if statements
  net/mlx5: E-Switch, Reduce ingress acl modify metadata stack usage
  net/mlx5e: Fix unused variable warning when CONFIG_MLX5_ESWITCH is off
  net/mlx5e: Fix compilation error in TLS code
  ipv6: fix static key imbalance in fl_create()
  ipv6: fix potential crash in ip6_datagram_dst_update()
  ipv6: tcp: fix flowlabels reflection for RST packets
  ...

Pull IDE update from David Miller:
 "Small cleanup"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide:
  ide: use BIT() macro for defining bit-flags

Pull MTD updates from Miquel Raynal:
 "This contains the following changes for MTD:

  MTD core changes:
   - New Hyperbus framework
   - New _is_locked (concat) implementation
   - Various cleanups

  NAND core changes:
   - use longest matching pattern in ->exec_op() default parser
   - export NAND operation tracer
   - add flag to indicate panic_write in MTD
   - use kzalloc() instead of kmalloc() and memset()

  Raw NAND controller drivers changes:
   - brcmnand:
       - fix BCH ECC layout for large page NAND parts
       - fallback to detected ecc-strength, ecc-step-size
       - when oops in progress use pio and interrupt polling
       - code refactor code to introduce helper functions
       - add support for v7.3 controller
   - FSMC:
       - use nand_op_trace for operation tracing
   - GPMI:
       - move all driver code into single file
       - various cleanups (including dmaengine changes)
       - use runtime PM to manage clocks
       - implement exec_op
   - MTK:
       - correct low level time calculation of r/w cycle
       - improve data sampling timing for read cycle
       - add validity check for CE# pin setting
       - fix wrongly assigned OOB buffer pointer issue
       - re-license MTK NAND driver as Dual MIT/GPL
   - STM32:
       - manage the get_irq error case
       - increase DMA completion timeouts

  Raw NAND chips drivers changes:
   - Macronix: add read-retry support

  Onenand driver changes:
   - add support for 8Gb datasize chips
   - avoid fall-through warnings

  SPI-NAND changes:
   - define macros for page-read ops with three-byte addresses
   - add support for two-byte device IDs and then for GigaDevice
     GD5F1GQ4UFxxG
   - add initial support for Paragon PN26G0xA
   - handle the case where the last page read has bitflips

  SPI-NOR core changes:
   - add support for the mt25ql02g and w25q16jv flashes
   - print error in case of jedec read id fails
   - is25lp256: add post BFPT fix to correct the addr_width

  SPI NOR controller drivers changes:
   - intel-spi: Add support for Intel Elkhart Lake SPI serial flash
   - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c
   - cadence-quadspi: add reset control"

* tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits)
  mtd: concat: implement _is_locked mtd operation
  mtd: concat: refactor concat_lock/concat_unlock
  mtd: abi: do not use C++ style comments in uapi header
  mtd: afs: remove unneeded NULL check
  mtd: rawnand: stm32_fmc2: increase DMA completion timeouts
  mtd: rawnand: Use kzalloc() instead of kmalloc() and memset()
  mtd: hyperbus: Add driver for TI's HyperBus memory controller
  mtd: spinand: read returns badly if the last page has bitflips
  mtd: spinand: Add initial support for Paragon PN26G0xA
  mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL
  mtd: rawnand: gpmi: remove double assignment to block_size
  dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support
  mtd: rawnand: brcmnand: Add support for v7.3 controller
  mtd: rawnand: brcmnand: Refactored code to introduce helper functions
  mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling
  mtd: Add flag to indicate panic_write
  mtd: rawnand: Add Macronix NAND read retry support
  mtd: onenand: Avoid fall-through warnings
  mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG
  mtd: spinand: Add support for two-byte device IDs
  ...

Merge tag 'for-5.3/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper updates from Mike Snitzer:

 - Add encrypted byte-offset initialization vector (eboiv) to DM crypt.

 - Add optional discard features to DM snapshot which allow freeing
   space from a DM device whose free space was exhausted.

 - Various small improvements to use struct_size() and kzalloc().

 - Fix to check if DM thin metadata is in fail_io mode before attempting
   to update the superblock to set the needs_check flag. Otherwise the
   DM thin-pool can hang.

 - Fix DM bufio shrinker's potential for ABBA recursion deadlock with DM
   thin provisioning on loop usecase.

* tag 'for-5.3/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm bufio: fix deadlock with loop device
  dm snapshot: add optional discard support features
  dm crypt: implement eboiv - encrypted byte-offset initialization vector
  dm crypt: remove obsolete comment about plumb IV
  dm crypt: wipe private IV struct after key invalid flag is set
  dm integrity: use kzalloc() instead of kmalloc() + memset()
  dm: update stale comment in end_clone_bio()
  dm log writes: fix incorrect comment about the logged sequence example
  dm log writes: use struct_size() to calculate size of pending_block
  dm crypt: use struct_size() when allocating encryption context
  dm integrity: always set version on superblock update
  dm thin metadata: check if in fail_io mode when setting needs_check

Pull IPMI updates from Corey Minyard:
 "Some small fixes for various things, nothing huge, mostly found by
  automated tools.

  Plus add a driver that allows Linux to act as an IPMB slave device, so
  it can be a satellite MC in an IPMI network"

* tag 'for-linus-5.3' of git://github.com/cminyard/linux-ipmi:
  docs: ipmb: place it at driver-api and convert to ReST
  fix platform_no_drv_owner.cocci warnings
  ipmi: ipmb: don't allocate i2c_client on stack
  ipmi: ipmb: Fix build error while CONFIG_I2C is set to m
  Add support for IPMB driver
  drivers: ipmi: Drop device reference
  ipmi_ssif: fix unexpected driver unregister warning
  ipmi_si: use bool type for initialized variable
  ipmi_si: fix unexpected driver unregister warning

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes for the v5.3 kernel cycle:

  Core changes:

   - Device links can optionally be added between a pin control producer
     and its consumers. This will affect how the system power management
     is handled: a pin controller will not suspend before all of its
     consumers have been suspended.

     This was necessary for the ST Microelectronics STMFX expander and
     need to be tested on other systems as well: it makes sense to make
     this default in the long run.

     Right now it is opt-in per driver.

   - Drive strength can be specified in microamps. With decreases in
     silicon technology, milliamps isn't granular enough, let's make it
     possible to select drive strengths in microamps.

     Right now the Meson (AMlogic) driver needs this.

  New drivers:

   - New subdriver for the Tegra 194 SoC.

   - New subdriver for the Qualcomm SDM845.

   - New subdriver for the Qualcomm SM8150.

   - New subdriver for the Freescale i.MX8MN (Freescale is now a product
     line of NXP).

   - New subdriver for Marvell MV98DX1135.

  Driver improvements:

   - The Bitmain BM1880 driver now supports pin config in addition to
     muxing.

   - The Qualcomm drivers can now reserve some GPIOs as taken aside and
     not usable for users. This is used in ACPI systems to take out some
     GPIO lines used by the BIOS so that noone else (neither kernel nor
     userspace) will play with them by mistake and crash the machine.

   - A slew of refurbishing around the Aspeed drivers (board management
     controllers for servers) in preparation for the new Aspeed AST2600
     SoC.

   - A slew of improvements over the SH PFC drivers as usual.

   - Misc cleanups and fixes"

* tag 'pinctrl-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (106 commits)
  pinctrl: aspeed: Strip moved macros and structs from private header
  pinctrl: aspeed: Fix missed include
  pinctrl: baytrail: Use GENMASK() consistently
  pinctrl: baytrail: Re-use data structures from pinctrl-intel.h
  pinctrl: baytrail: Use defined macro instead of magic in byt_get_gpio_mux()
  pinctrl: qcom: Add SM8150 pinctrl driver
  dt-bindings: pinctrl: qcom: Add SM8150 pinctrl binding
  dt-bindings: pinctrl: qcom: Document missing gpio nodes
  pinctrl: aspeed: Add implementation-related documentation
  pinctrl: aspeed: Split out pinmux from general pinctrl
  pinctrl: aspeed: Clarify comment about strapping W1C
  pinctrl: aspeed: Correct comment that is no longer true
  MAINTAINERS: Add entry for ASPEED pinctrl drivers
  dt-bindings: pinctrl: aspeed: Convert AST2500 bindings to json-schema
  dt-bindings: pinctrl: aspeed: Convert AST2400 bindings to json-schema
  dt-bindings: pinctrl: aspeed: Split bindings document in two
  pinctrl: qcom: Add irq_enable callback for msm gpio
  pinctrl: madera: Fixup SPDX headers
  pinctrl: qcom: sdm845: Fix CONFIG preprocessor guard
  pinctrl: tegra: Add bitmask support for parked bits
  ...

Pull input updates from Dmitry Torokhov:

 - an update to Elan touchpad SMBus driver to fetch device parameters
   (size, resolution) while it is still in PS/2 mode, before switching
   over to SMBus, as in that mode some devices return garbage dimensions

 - update to iforce joystick driver

 - miscellaneous driver fixes

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (48 commits)
  Input: gpio_keys_polled - allow specifying name of input device
  Input: edt-ft5x06 - simplify event reporting code
  Input: max77650-onkey - add MODULE_ALIAS()
  Input: atmel_mxt_ts - fix leak in mxt_update_cfg()
  Input: synaptics - enable SMBUS on T480 thinkpad trackpad
  Input: atmel_mxt_ts - fix -Wunused-const-variable
  Input: joydev - extend absolute mouse detection
  HID: quirks: Refactor ELAN 400 and 401 handling
  Input: elan_i2c - export the device id whitelist
  Input: edt-ft5x06 - use get_unaligned_be16()
  Input: iforce - add the Saitek R440 Force Wheel
  Input: iforce - use unaligned accessors, where appropriate
  Input: iforce - drop couple of temps from transport code
  Input: iforce - drop bus type from iforce structure
  Input: iforce - use DMA-safe buffores for USB transfers
  Input: iforce - allow callers supply data buffer when fetching device IDs
  Input: iforce - only call iforce_process_packet() if initialized
  Input: iforce - signal command completion from transport code
  Input: iforce - do not combine arguments for iforce_process_packet()
  Input: iforce - factor out hat handling when parsing packets
  ...

Pull io_uring updates from Jens Axboe:
 "This contains:

   - Support for recvmsg/sendmsg as first class opcodes.

     I don't envision going much further down this path, as there are
     plans in progress to support potentially any system call in an
     async fashion through io_uring. But I think it does make sense to
     have certain core ops available directly, especially those that can
     support a "try this non-blocking" flag/mode. (me)

   - Handle generic short reads automatically.

     This can happen fairly easily if parts of the buffered read is
     cached. Since the application needs to issue another request for
     the remainder, just do this internally and save kernel/user
     roundtrip while providing a nicer more robust API. (me)

   - Support for linked SQEs.

     This allows SQEs to depend on each other, enabling an application
     to eg queue a read-from-this-file,write-to-that-file pair. (me)

   - Fix race in stopping SQ thread (Jackie)"

* tag 'for-5.3/io_uring-20190711' of git://git.kernel.dk/linux-block:
  io_uring: fix io_sq_thread_stop running in front of io_sq_thread
  io_uring: add support for recvmsg()
  io_uring: add support for sendmsg()
  io_uring: add support for sqe links
  io_uring: punt short reads to async context
  uio: make import_iovec()/compat_import_iovec() return bytes on success

Commit 0e5a610b ("ppp: mppe: switch to RC4 library interface"),
which was merged through the crypto tree for v5.3, changed ppp_mppe.c to
use the new arc4_crypt() library function rather than access RC4 through
the dynamic crypto_skcipher API.

Meanwhile commit aad1dcc4 ("ppp: mppe: Add softdep to arc4") was
merged through the net tree and added a module soft-dependency on "arc4".

The latter commit no longer makes sense because the code now uses the
"libarc4" module rather than "arc4", and also due to the direct use of
arc4_crypt(), no module soft-dependency is required.

So revert the latter commit.

Cc: Takashi Iwai <tiwai@suse.de>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull dlm updates from David Teigland:
 "This set removes some unnecessary debugfs error handling, and checks
  that lowcomms workqueues are not NULL before destroying"

* tag 'dlm-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
  dlm: no need to check return value of debugfs_create functions
  dlm: check if workqueues are NULL before flushing/destroying

Pull 9p updates from Dominique Martinet:
 "Two small fixes to properly cleanup the 9p transports list if
  virtio/xen module initialization fail.

  9p might otherwise try to access memory from a module that failed to
  register got freed"

* tag '9p-for-5.3' of git://github.com/martinetd/linux:
  9p/xen: Add cleanup path in p9_trans_xen_init
  9p/virtio: Add cleanup path in p9_virtio_init

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've introduced native swap file support which can
  exploit DIO, enhanced existing checkpoint=disable feature with
  additional mount option to tune the triggering condition, and allowed
  user to preallocate physical blocks in a pinned file which will be
  useful to avoid f2fs fragmentation in append-only workloads. In
  addition, we've fixed subtle quota corruption issue.

  Enhancements:
   - add swap file support which uses DIO
   - allocate blocks for pinned file
   - allow SSR and mount option to enhance checkpoint=disable
   - enhance IPU IOs
   - add more sanity checks such as memory boundary access

  Bug fixes:
   - quota corruption in very corner case of error-injected SPO case
   - fix root_reserved on remount and some wrong counts
   - add missing fsck flag

  Some patches were also introduced to clean up ambiguous i_flags and
  debugging messages codes"

* tag 'f2fs-for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (33 commits)
  f2fs: improve print log in f2fs_sanity_check_ckpt()
  f2fs: avoid out-of-range memory access
  f2fs: fix to avoid long latency during umount
  f2fs: allow all the users to pin a file
  f2fs: support swap file w/ DIO
  f2fs: allocate blocks for pinned file
  f2fs: fix is_idle() check for discard type
  f2fs: add a rw_sem to cover quota flag changes
  f2fs: set SBI_NEED_FSCK for xattr corruption case
  f2fs: use generic EFSBADCRC/EFSCORRUPTED
  f2fs: Use DIV_ROUND_UP() instead of open-coding
  f2fs: print kernel message if filesystem is inconsistent
  f2fs: introduce f2fs_<level> macros to wrap f2fs_printk()
  f2fs: avoid get_valid_blocks() for cleanup
  f2fs: ioctl for removing a range from F2FS
  f2fs: only set project inherit bit for directory
  f2fs: separate f2fs i_flags from fs_flags and ext4 i_flags
  f2fs: replace ktype default_attrs with default_groups
  f2fs: Add option to limit required GC for checkpoint=disable
  f2fs: Fix accounting for unusable blocks
  ...

Pull xfs updates from Darrick Wong:
 "In this release there are a significant amounts of consolidations and
  cleanups in the log code; restructuring of the log to issue struct
  bios directly; new bulkstat ioctls to return v5 fs inode information
  (and fix all the padding problems of the old ioctl); the beginnings of
  multithreaded inode walks (e.g. quotacheck); and a reduction in memory
  usage in the online scrub code leading to reduced runtimes.

   - Refactor inode geometry calculation into a single structure instead
     of open-coding pieces everywhere.

   - Add online repair to build options.

   - Remove unnecessary function call flags and functions.

   - Claim maintainership of various loose xfs documentation and header
     files.

   - Use struct bio directly for log buffer IOs instead of struct
     xfs_buf.

   - Reduce log item boilerplate code requirements.

   - Merge log item code spread across too many files.

   - Further distinguish between log item commits and cancellations.

   - Various small cleanups to the ag small allocator.

   - Support cgroup-aware writeback

   - libxfs refactoring for mkfs cleanup

   - Remove unneeded #includes

   - Fix a memory allocation miscalculation in the new log bio code

   - Fix bisection problems

   - Fix a crash in ioend processing caused by tripping over freeing of
     preallocated transactions

   - Split out a generic inode walk mechanism from the bulkstat code,
     hook up all the internal users to use the walking code, then clean
     up bulkstat to serve only the bulkstat ioctls.

   - Add a multithreaded iwalk implementation to speed up quotacheck on
     fast storage with many CPUs.

   - Remove unnecessary return values in logging teardown functions.

   - Supplement the bstat and inogrp structures with new bulkstat and
     inumbers structures that have all the fields we need for v5
     filesystem features and none of the padding problems of their
     predecessors.

   - Wire up new ioctls that use the new structures with a much simpler
     bulk_ireq structure at the head instead of the pointerhappy mess we
     had before.

   - Enable userspace to constrain bulkstat returns to a single AG or a
     single special inode so that we can phase out a lot of geometry
     guesswork in userspace.

   - Reduce memory consumption and zeroing overhead in extended
     attribute scrub code.

   - Fix some behavioral regressions in the new bulkstat backend code.

   - Fix some behavioral regressions in the new log bio code"

* tag 'xfs-5.3-merge-12' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (100 commits)
  xfs: chain bios the right way around in xfs_rw_bdev
  xfs: bump INUMBERS cursor correctly in xfs_inumbers_walk
  xfs: don't update lastino for FSBULKSTAT_SINGLE
  xfs: online scrub needn't bother zeroing its temporary buffer
  xfs: only allocate memory for scrubbing attributes when we need it
  xfs: refactor attr scrub memory allocation function
  xfs: refactor extended attribute buffer pointer functions
  xfs: attribute scrub should use seen_enough to pass error values
  xfs: allow single bulkstat of special inodes
  xfs: specify AG in bulk req
  xfs: wire up the v5 inumbers ioctl
  xfs: wire up new v5 bulkstat ioctls
  xfs: introduce v5 inode group structure
  xfs: introduce new v5 bulkstat structure
  xfs: rename bulkstat functions
  xfs: remove various bulk request typedef usage
  fs: xfs: xfs_log: Change return type from int to void
  xfs: poll waiting for quotacheck
  xfs: multithreaded iwalk implementation
  xfs: refactor INUMBERS to use iwalk functions
  ...

Pull common SETFLAGS/FSSETXATTR parameter checking from Darrick Wong:
 "Here's a patch series that sets up common parameter checking functions
  for the FS_IOC_SETFLAGS and FS_IOC_FSSETXATTR ioctl implementations.

  The goal here is to reduce the amount of behaviorial variance between
  the filesystems where those ioctls originated (ext2 and XFS,
  respectively) and everybody else.

   - Standardize parameter checking for the SETFLAGS and FSSETXATTR
     ioctls (which were the file attribute setters for ext4 and xfs and
     have now been hoisted to the vfs)

   - Only allow the DAX flag to be set on files and directories"

* tag 'vfs-fix-ioctl-checking-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  vfs: only allow FSSETXATTR to set DAX flag on files and dirs
  vfs: teach vfs_ioc_fssetxattr_check to check extent size hints
  vfs: teach vfs_ioc_fssetxattr_check to check project id info
  vfs: create a generic checking function for FS_IOC_FSSETXATTR
  vfs: create a generic checking and prep function for FS_IOC_SETFLAGS

Merge tag 'linux-kselftest-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:
 "This Kselftest update for Linux 5.3-rc1 consists of build failure
  fixes and minor code cleaning patch to remove duplicate headers"

* tag 'linux-kselftest-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  rseq/selftests: Fix Thumb mode build failure on arm32
  kselftests: cgroup: remove duplicated include from test_freezer.c
  selftests: timestamping: Fix SIOCGSTAMP undeclared build failure
  selftests: dma-buf: Adding kernel config fragment CONFIG_UDMABUF=y

Pull Kconfig updates from Masahiro Yamada:

 - always require argument for --defconfig and remove the hard-coded
   arch/$(ARCH)/defconfig path

 - make arch/$(SRCARCH)/configs/defconfig the new default of defconfig

 - some code cleanups

* tag 'kconfig-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kconfig: remove meaningless if-conditional in conf_read()
  kconfig: Fix spelling of sym_is_changable
  unicore32: rename unicore32_defconfig to defconfig
  kconfig: make arch/*/configs/defconfig the default of KBUILD_DEFCONFIG
  kconfig: add static qualifier to expand_string()
  kconfig: require the argument of --defconfig
  kconfig: remove always false ifeq ($(KBUILD_DEFCONFIG,) conditional

Pull Kbuild updates from Masahiro Yamada:

 - remove headers_{install,check}_all targets

 - remove unreasonable 'depends on !UML' from CONFIG_SAMPLES

 - re-implement 'make headers_install' more cleanly

 - add new header-test-y syntax to compile-test headers

 - compile-test exported headers to ensure they are compilable in
   user-space

 - compile-test headers under include/ to ensure they are self-contained

 - remove -Waggregate-return, -Wno-uninitialized, -Wno-unused-value
   flags

 - add -Werror=unknown-warning-option for Clang

 - add 128-bit built-in types support to genksyms

 - fix missed rebuild of modules.builtin

 - propagate 'No space left on device' error in fixdep to Make

 - allow Clang to use its integrated assembler

 - improve some coccinelle scripts

 - add a new flag KBUILD_ABS_SRCTREE to request Kbuild to use absolute
   path for $(srctree).

 - do not ignore errors when compression utility is missing

 - misc cleanups

* tag 'kbuild-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (49 commits)
  kbuild: use -- separater intead of $(filter-out ...) for cc-cross-prefix
  kbuild: Inform user to pass ARCH= for make mrproper
  kbuild: fix compression errors getting ignored
  kbuild: add a flag to force absolute path for srctree
  kbuild: replace KBUILD_SRCTREE with boolean building_out_of_srctree
  kbuild: remove src and obj from the top Makefile
  scripts/tags.sh: remove unused environment variables from comments
  scripts/tags.sh: drop SUBARCH support for ARM
  kbuild: compile-test kernel headers to ensure they are self-contained
  kheaders: include only headers into kheaders_data.tar.xz
  kheaders: remove meaningless -R option of 'ls'
  kbuild: support header-test-pattern-y
  kbuild: do not create wrappers for header-test-y
  kbuild: compile-test exported headers to ensure they are self-contained
  init/Kconfig: add CONFIG_CC_CAN_LINK
  kallsyms: exclude kasan local symbols on s390
  kbuild: add more hints about SUBDIRS replacement
  coccinelle: api/stream_open: treat all wait_.*() calls as blocking
  coccinelle: put_device: Add a cast to an expression for an assignment
  coccinelle: put_device: Adjust a message construction
  ...

Pull asm-generic updates from Arnd Bergmann:
 "The asm-generic changes for 5.3 consist of a cleanup series to remove
  ptrace.h from Christoph Hellwig, who explains:

    'asm-generic/ptrace.h is a little weird in that it doesn't actually
     implement any functionality, but it provided multiple layers of
     macros that just implement trivial inline functions. We implement
     those directly in the few architectures and be off with a much
     simpler design.'

  at https://lore.kernel.org/lkml/20190624054728.30966-1-hch@lst.de/"

* tag 'asm-generic-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: remove ptrace.h
  x86: don't use asm-generic/ptrace.h
  sh: don't use asm-generic/ptrace.h
  powerpc: don't use asm-generic/ptrace.h
  arm64: don't use asm-generic/ptrace.h

Pull more s390 updates from Vasily Gorbik:

 - Fix integer overflow during stack frame unwind with invalid
   backchain.

 - Cleanup unused symbol export in zcrypt code.

 - Fix MIO addressing control activation in PCI code and expose its
   usage via sysfs.

 - Fix kernel image signature verification report presence detection.

 - Fix irq registration in vfio-ap code.

 - Add CPU measurement counters for newer machines.

 - Add base DASD thin provisioning support and code cleanups.

* tag 's390-5.3-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (21 commits)
  s390/unwind: avoid int overflow in outside_of_stack
  s390/zcrypt: remove the exporting of ap_query_configuration
  s390/pci: add mio_enabled attribute
  s390: fix setting of mio addressing control
  s390/ipl: Fix detection of has_secure attribute
  s390: vfio-ap: fix irq registration
  s390/cpumf: Add extended counter set definitions for model 8561 and 8562
  s390/dasd: Handle out-of-space constraint
  s390/dasd: Add discard support for ESE volumes
  s390/dasd: Use ALIGN_DOWN macro
  s390/dasd: Make dasd_setup_queue() a discipline function
  s390/dasd: Add new ioctl to release space
  s390/dasd: Add dasd_sleep_on_queue_interruptible()
  s390/dasd: Add missing intensity definition
  s390/dasd: Fix whitespace
  s390/dasd: Add dynamic formatting support for ESE volumes
  s390/dasd: Recognise data for ESE volumes
  s390/dasd: Put sub-order definitions in a separate section
  s390/dasd: Make layout analysis ESE compatible
  s390/dasd: Remove old defines and function
  ...

This patch replaces the legacy bulk gpio.h include
with the proper gpio/consumer.h variant. This was
caught by the kbuild test robot that was running
into an error because of this.

For more information why linux/gpio.h is bad can be found in:
commit 56a46b61 ("gpio: Clarify that <linux/gpio.h> is legacy")
Reported-by: Nkbuild test robot <lkp@intel.com>
Link: https://www.spinics.net/lists/netdev/msg584447.html
Fixes: a653f2f5 ("net: dsa: qca8k: introduce reset via gpio feature")
Signed-off-by: NChristian Lamparter <chunkeey@gmail.com>
Reviewed-by: NVivien Didelot <vivien.didelot@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull arch/nios2 updates from Ley Foon Tan.

* tag 'nios2-v5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
  nios2: configs: Remove useless UEVENT_HELPER_PATH
  nios2: remove pointless second entry for CONFIG_TRACE_IRQFLAGS_SUPPORT

Use devm_platform_ioremap_resource instead of
devm_ioremap_resource. Make the code simpler.
Signed-off-by: NJiangfeng Xiao <xiaojiangfeng@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The cudbg_collect_mem_region() and cudbg_read_fw_mem() both use several
hundred kilobytes of kernel stack space. One gets inlined into the other,
which causes the stack usage to be combined beyond the warning limit
when building with clang:

drivers/net/ethernet/chelsio/cxgb4/cudbg_lib.c:1057:12: error: stack frame size of 1244 bytes in function 'cudbg_collect_mem_region' [-Werror,-Wframe-larger-than=]

Restructuring cudbg_collect_mem_region() lets clang do the same
optimization that gcc does and reuse the stack slots as it can
see that the large variables are never used together.

A better fix might be to avoid using cudbg_meminfo on the stack
altogether, but that requires a larger rewrite.

Fixes: a1c69520 ("cxgb4: collect MC memory dump")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull KVM updates from Paolo Bonzini:
 "ARM:
   - support for chained PMU counters in guests
   - improved SError handling
   - handle Neoverse N1 erratum #1349291
   - allow side-channel mitigation status to be migrated
   - standardise most AArch64 system register accesses to msr_s/mrs_s
   - fix host MPIDR corruption on 32bit
   - selftests ckleanups

  x86:
   - PMU event {white,black}listing
   - ability for the guest to disable host-side interrupt polling
   - fixes for enlightened VMCS (Hyper-V pv nested virtualization),
   - new hypercall to yield to IPI target
   - support for passing cstate MSRs through to the guest
   - lots of cleanups and optimizations

  Generic:
   - Some txt->rST conversions for the documentation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (128 commits)
  Documentation: virtual: Add toctree hooks
  Documentation: kvm: Convert cpuid.txt to .rst
  Documentation: virtual: Convert paravirt_ops.txt to .rst
  KVM: x86: Unconditionally enable irqs in guest context
  KVM: x86: PMU Event Filter
  kvm: x86: Fix -Wmissing-prototypes warnings
  KVM: Properly check if "page" is valid in kvm_vcpu_unmap
  KVM: arm/arm64: Initialise host's MPIDRs by reading the actual register
  KVM: LAPIC: Retry tune per-vCPU timer_advance_ns if adaptive tuning goes insane
  kvm: LAPIC: write down valid APIC registers
  KVM: arm64: Migrate _elx sysreg accessors to msr_s/mrs_s
  KVM: doc: Add API documentation on the KVM_REG_ARM_WORKAROUNDS register
  KVM: arm/arm64: Add save/restore support for firmware workaround state
  arm64: KVM: Propagate full Spectre v2 workaround state to KVM guests
  KVM: arm/arm64: Support chained PMU counters
  KVM: arm/arm64: Remove pmc->bitmask
  KVM: arm/arm64: Re-create event when setting counter value
  KVM: arm/arm64: Extract duplicated code to own function
  KVM: arm/arm64: Rename kvm_pmu_{enable/disable}_counter functions
  KVM: LAPIC: ARBPRI is a reserved register for x2APIC
  ...

tipc_named_node_up() creates a skb list. It passes the list to
tipc_node_xmit() which has some code paths that can call
skb_queue_purge() which relies on the list->lock being initialised.

The spin_lock is only needed if the messages end up on the receive path
but when the list is created in tipc_named_node_up() we don't
necessarily know if it is going to end up there.

Once all the skb list users are updated in tipc it will then be possible
to update them to use the unlocked variants of the skb list functions
and initialise the lock when we know the message will follow the receive
path.
Signed-off-by: NChris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Added mask upper bound test case
- Added mask validation test case
- Added mask replacement case
Signed-off-by: NRoman Mashak <mrv@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>