- 21 3月, 2012 19 次提交
-
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
We can now do the self test using debugfs, so remove the code and keep the debug flag to enable more traces. Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
This allow to call arbitrary sabi commands wihout modifying the driver at all. For example, setting the keyboard backlight brightness to 5 using debugfs interface can be done like that: ; Set the command echo 0x78 > command ; Set the data echo 0x0582 > d0 ; Fill the rest with 0 echo 0 > d1 echo 0 > d2 echo 0 > d3 ; And issue the command cat call Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
* SABI command are on 16 bits, not 8 * SABI can read/write up to 11 byte of data * There is not real difference between "get" and "set" commands, so refactorise the code of both functions Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Will be usefull later when we will have more platform sysfs files like battery_life_extender or usb_charge. Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
samsung-laptop is not at all related to ACPI, but since this interface is not documented at all, and the driver has to use it at load to understand how it works on the laptop, I think it's a good idea to disable it if a better solution is available. Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Create _init()/_exit() function for each subsystem, remove the local struct samsung_laptop * and only keep a struct platform_device * that can only be used in samsung_init() and samsung_exit(). Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Corentin Chary 提交于
Even if this driver can only be loaded once, it is still a good idea to create some kind of context structure. Signed-off-by: NCorentin Chary <corentincj@iksaif.net> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Axel Lin 提交于
This patch converts the drivers in drivers/platform/x86/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Hong Liu <hong.liu@intel.com> Cc: Durgadoss R <durgadoss.r@intel.com> Cc: Daniel Drake <dsd@laptop.org> Signed-off-by: NAxel Lin <axel.lin@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Borislav Petkov 提交于
Turn off the following triggered with gcc 4.6.1 on Debian testing: drivers/platform/x86/hdaps.c: In function ‘hdaps_temp2_show’: drivers/platform/x86/hdaps.c:398:16: warning: ‘temp’ may be used uninitialized in this function [-Wuninitialized] drivers/platform/x86/hdaps.c: In function ‘hdaps_temp1_show’: drivers/platform/x86/hdaps.c:385:16: warning: ‘temp’ may be used uninitialized in this function [-Wuninitialized] Cc: Frank Seidel <frank@f-seidel.de> Cc: Matthew Garrett <mjg@redhat.com> Cc: platform-driver-x86@vger.kernel.org Signed-off-by: NBorislav Petkov <bp@alien8.de> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 AceLan Kao 提交于
Add "Vostro 3555", "Inspiron N311z", and "Inspiron M5110" into quirks, so that they could have touchpad LED function work. Signed-off-by: NAceLan Kao <acelan.kao@canonical.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 John Hughes 提交于
Fix scancodes returned by driver to match scancodes used to remap keys. (Before the patch FN/E returned scancode 0x1B, but to remap scancode 0x14 had to be used). The scancodes returned by the sony-laptop driver for function keys did not match the scancodes used to remap keys. Also, since the scancode was sent to the input subsystem after the mapped keysym the /lib/udev/keymap utility was confused about which scancode to report for which keysym. This patch fixes the driver so the correct scancode is shown for each key. It also adds to the documentation a description of where to find the scancodes. Signed-off-by: NJohn Hughes <john@calva.com> Acked-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Alan Cox 提交于
All the production devices use the PC compatible version of this device so don't use the SCU interfaces or the SCU firmware interfaces. Delete lots of code and conditional paths Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Dmitry Torokhov 提交于
Use MODULE_DEVCE_TABLE instead of rolling MODULE_ALIAS by hand. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Dmitry Torokhov 提交于
Use MODULE_DEVCE_TABLE instead of rolling MODULE_ALIAS by hand. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Dmitry Torokhov 提交于
Use MODULE_DEVCE_TABLE instead of rolling MODULE_ALIAS by hand. Signed-off-by: NDmitry Torokhov <dtor@mail.ru> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Marcos Paulo de Souza 提交于
Signed-off-by: NMarcos Paulo de Souza <marcos.mage@gmail.com> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
由 Josh Boyer 提交于
When the keyboard backlight support was originally added, the commit said to default it to on with a 10 second timeout. That actually wasn't the case, as the default value is commented out for the kbd_backlight parameter. Because it is a static variable, it gets set to 0 by default without some other form of initialization. However, it seems the function to set the value wasn't actually called immediately, so whatever state the keyboard was in initially would remain. Then commit df410d52 was introduced during the 2.6.39 timeframe to immediately set whatever value was present (as well as attempt to restore/reset the state on module removal or resume). That seems to have now forced the light off immediately when the module is loaded unless the option kbd_backlight=1 is specified. Let's enable it by default again (for the first time). This should solve https://bugzilla.redhat.com/show_bug.cgi?id=728478Signed-off-by: NJosh Boyer <jwboyer@redhat.com> Acked-by: NMattia Dongili <malattia@linux.it> Signed-off-by: NMatthew Garrett <mjg@redhat.com>
-
- 19 3月, 2012 2 次提交
-
-
由 Linus Torvalds 提交于
-
由 Jason Baron 提交于
Commit 28d82dc1 ("epoll: limit paths") that I did to limit the number of possible wakeup paths in epoll is causing a few applications to longer work (dovecot for one). The original patch is really about limiting the amount of epoll nesting (since epoll fds can be attached to other fds). Thus, we probably can allow an unlimited number of paths of depth 1. My current patch limits it at 1000. And enforce the limits on paths that have a greater depth. This is captured in: https://bugzilla.redhat.com/show_bug.cgi?id=681578Signed-off-by: NJason Baron <jbaron@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 18 3月, 2012 2 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/net由 Linus Torvalds 提交于
Pull networking changes from David Miller: "1) icmp6_dst_alloc() returns NULL instead of ERR_PTR() leading to crashes, particularly during shutdown. Reported by Dave Jones and fixed by Eric Dumazet. 2) hyperv and wimax/i2400m return NETDEV_TX_BUSY when they have already freed the SKB, which causes crashes as to the caller this means requeue the packet. Fixes from Eric Dumazet. 3) usbnet driver doesn't allocate the right amount of headroom on fresh RX SKBs, fix from Eric Dumazet. 4) Fix regression in ip6_mc_find_dev_rcu(), as an RCU lookup it abolutely should not take a reference to 'dev', this leads to leaks. Fix from RonQing Li. 5) Fix netfilter ctnetlink race between delete and timeout expiration. From Pablo Neira Ayuso. 6) Revert SFQ change which causes regressions, specifically queueing to tail can lead to unavoidable flow starvation. From Eric Dumazet. 7) Fix a memory leak and a crash on corrupt firmware files in bnx2x, from Michal Schmidt." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: netfilter: ctnetlink: fix race between delete and timeout expiration ipv6: Don't dev_hold(dev) in ip6_mc_find_dev_rcu. wimax/i2400m: fix erroneous NETDEV_TX_BUSY use net/hyperv: fix erroneous NETDEV_TX_BUSY use net/usbnet: reserve headroom on rx skbs bnx2x: fix memory leak in bnx2x_init_firmware() bnx2x: fix a crash on corrupt firmware file sch_sfq: revert dont put new flow at the end of flows ipv6: fix icmp6_dst_alloc()
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull perf fixes from Ingo Molnar. * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf tools, x86: Build perf on older user-space as well perf tools: Use scnprintf where applicable perf tools: Incorrect use of snprintf results in SEGV
-
- 17 3月, 2012 9 次提交
-
-
由 Pablo Neira Ayuso 提交于
Kerin Millar reported hardlockups while running `conntrackd -c' in a busy firewall. That system (with several processors) was acting as backup in a primary-backup setup. After several tries, I found a race condition between the deletion operation of ctnetlink and timeout expiration. This patch fixes this problem. Tested-by: NKerin Millar <kerframil@gmail.com> Reported-by: NKerin Millar <kerframil@gmail.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 RongQing.Li 提交于
ip6_mc_find_dev_rcu() is called with rcu_read_lock(), so don't need to dev_hold(). With dev_hold(), not corresponding dev_put(), will lead to leak. [ bug introduced in 96b52e61 (ipv6: mcast: RCU conversions) ] Signed-off-by: NRongQing.Li <roy.qing.li@gmail.com> Acked-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Linus Torvalds 提交于
Merge some more email patches from Andrew Morton: "A couple of nilfs fixes" * emailed from Andrew Morton <akpm@linux-foundation.org>: nilfs2: fix NULL pointer dereference in nilfs_load_super_block() nilfs2: clamp ns_r_segments_percentage to [1, 99]
-
由 Ryusuke Konishi 提交于
According to the report from Slicky Devil, nilfs caused kernel oops at nilfs_load_super_block function during mount after he shrank the partition without resizing the filesystem: BUG: unable to handle kernel NULL pointer dereference at 00000048 IP: [<d0d7a08e>] nilfs_load_super_block+0x17e/0x280 [nilfs2] *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP ... Call Trace: [<d0d7a87b>] init_nilfs+0x4b/0x2e0 [nilfs2] [<d0d6f707>] nilfs_mount+0x447/0x5b0 [nilfs2] [<c0226636>] mount_fs+0x36/0x180 [<c023d961>] vfs_kern_mount+0x51/0xa0 [<c023ddae>] do_kern_mount+0x3e/0xe0 [<c023f189>] do_mount+0x169/0x700 [<c023fa9b>] sys_mount+0x6b/0xa0 [<c04abd1f>] sysenter_do_call+0x12/0x28 Code: 53 18 8b 43 20 89 4b 18 8b 4b 24 89 53 1c 89 43 24 89 4b 20 8b 43 20 c7 43 2c 00 00 00 00 23 75 e8 8b 50 68 89 53 28 8b 54 b3 20 <8b> 72 48 8b 7a 4c 8b 55 08 89 b3 84 00 00 00 89 bb 88 00 00 00 EIP: [<d0d7a08e>] nilfs_load_super_block+0x17e/0x280 [nilfs2] SS:ESP 0068:ca9bbdcc CR2: 0000000000000048 This turned out due to a defect in an error path which runs if the calculated location of the secondary super block was invalid. This patch fixes it and eliminates the reported oops. Reported-by: NSlicky Devil <slicky.dvl@gmail.com> Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: NSlicky Devil <slicky.dvl@gmail.com> Cc: <stable@vger.kernel.org> [2.6.30+] Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Haogang Chen 提交于
ns_r_segments_percentage is read from the disk. Bogus or malicious value could cause integer overflow and malfunction due to meaningless disk usage calculation. This patch reports error when mounting such bogus volumes. Signed-off-by: NHaogang Chen <haogangchen@gmail.com> Signed-off-by: NRyusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security由 Linus Torvalds 提交于
Pull maintainer update from James Morris: "Please pull this patch which adds Serge as maintainer of the capabilities code, as discussed on lwn and the lsm list. New capabilities must be signed off by the maintainer, and new uses of any capabilities should at be cc'd to the maintainer." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: MAINTAINERS: Add Serge as maintainer of capabilities
-
git://linux-c6x.org/git/projects/linux-c6x-upstreaming由 Linus Torvalds 提交于
Pull c6x bugfix from Mark Salter: "Remove dead code from entry.S which causes a build failure when using a newer assembler (v2.22 complains about it, v2.20 ignores it)." * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: C6X: remove dead code from entry.S
-
由 Anton Blanchard 提交于
When writing files to afs I sometimes hit a BUG: kernel BUG at fs/afs/rxrpc.c:179! With a backtrace of: afs_free_call afs_make_call afs_fs_store_data afs_vnode_store_data afs_write_back_from_locked_page afs_writepages_region afs_writepages The cause is: ASSERT(skb_queue_empty(&call->rx_queue)); Looking at a tcpdump of the session the abort happens because we are exceeding our disk quota: rx abort fs reply store-data error diskquota exceeded (32) So the abort error is valid. We hit the BUG because we haven't freed all the resources for the call. By freeing any skbs in call->rx_queue before calling afs_free_call we avoid hitting leaking memory and avoid hitting the BUG. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NDavid Howells <dhowells@redhat.com> Cc: <stable@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Anton Blanchard 提交于
A read of a large file on an afs mount failed: # cat junk.file > /dev/null cat: junk.file: Bad message Looking at the trace, call->offset wrapped since it is only an unsigned short. In afs_extract_data: _enter("{%u},{%zu},%d,,%zu", call->offset, len, last, count); ... if (call->offset < count) { if (last) { _leave(" = -EBADMSG [%d < %zu]", call->offset, count); return -EBADMSG; } Which matches the trace: [cat ] ==> afs_extract_data({65132},{524},1,,65536) [cat ] <== afs_extract_data() = -EBADMSG [0 < 65536] call->offset went from 65132 to 0. Fix this by making call->offset an unsigned int. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NDavid Howells <dhowells@redhat.com> Cc: <stable@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 3月, 2012 8 次提交
-
-
由 Mark Salter 提交于
The ENDPROC() on sys_fadvise64_c6x() in arch/c6x/kernel/entry.S is outside of the conditional block with the matching ENTRY() macro. This leads a newer (v2.22 vs. v2.20) assembler to complain: /tmp/ccGZBaPT.s: Assembler messages: /tmp/ccGZBaPT.s: Error: .size expression for sys_fadvise64_c6x does not evaluate to a constant The conditional block became dead code when c6x switched to generic unistd.h and should be removed along with the offending ENDPROC(). Signed-off-by: NMark Salter <msalter@redhat.com> Acked-by: NDavid Howells <dhowells@redhat.com>
-
由 Eric Dumazet 提交于
A driver start_xmit() method cannot free skb and return NETDEV_TX_BUSY, since caller is going to reuse freed skb. In fact netif_tx_stop_queue() / netif_stop_queue() is needed before returning NETDEV_TX_BUSY or you can trigger a ksoftirqd fatal loop. In case of memory allocation error, only safe way is to drop the packet and return NETDEV_TX_OK Also increments tx_dropped counter Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
A driver start_xmit() method cannot free skb and return NETDEV_TX_BUSY, since caller is going to reuse freed skb. This is mostly a revert of commit bf769375 (staging: hv: fix the return status of netvsc_start_xmit()) In fact netif_tx_stop_queue() / netif_stop_queue() is needed before returning NETDEV_TX_BUSY or you can trigger a ksoftirqd fatal loop. In case of memory allocation error, only safe way is to drop the packet and return NETDEV_TX_OK Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
network drivers should reserve some headroom on incoming skbs so that we dont need expensive reallocations, eg forwarding packets in tunnels. This NET_SKB_PAD padding is done in various helpers, like __netdev_alloc_skb_ip_align() in this patch, combining NET_SKB_PAD and NET_IP_ALIGN magic. Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Cc: Oliver Neukum <oneukum@suse.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: NOliver Neukum <oneukum@suse.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
When cycling the interface down and up, bnx2x_init_firmware() knows that the firmware is already loaded, but nevertheless it allocates certain arrays anew (init_data, init_ops, init_ops_offsets, iro_arr). The old arrays are leaked. Fix the leaks by returning early if the firmware was already loaded. Because if the firmware is loaded, so are the arrays. Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Acked-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michal Schmidt 提交于
If the requested firmware is deemed corrupt and then released, reset the pointer to NULL in order to avoid double-freeing it in bnx2x_release_firmware() or dereferencing it in bnx2x_init_firmware(). Signed-off-by: NMichal Schmidt <mschmidt@redhat.com> Acked-by: NEilon Greenstein <eilong@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
This reverts commit d47a0ac7 (sch_sfq: dont put new flow at the end of flows) As Jesper found out, patch sounded great but has bad side effects. In stress situation, pushing new flows in front of the queue can prevent old flows doing any progress. Packets can stay in SFQ queue for unlimited amount of time. It's possible to add heuristics to limit this problem, but this would add complexity outside of SFQ scope. A more sensible answer to Dave Taht concerns (who reported the issued I tried to solve in original commit) is probably to use a qdisc hierarchy so that high prio packets dont enter a potentially crowded SFQ qdisc. Reported-by: NJesper Dangaard Brouer <jdb@comx.dk> Cc: Dave Taht <dave.taht@gmail.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
commit 87a11578 ( ipv6: Move xfrm_lookup() call down into icmp6_dst_alloc().) forgot to convert one error path, leading to crashes in mld_sendpack() Many thanks to Dave Jones for providing a very complete bug report. Reported-by: NDave Jones <davej@redhat.com> Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-