Currently __blk_rq_prep_clone() copies only REQ_WRITE and REQ_DISCARD.
There's no reason to omit other command flags and REQ_FUA needs to be
copied to implement FUA support in request-based dm.

REQ_COMMON_MASK which specifies flags to be copied from bio to request
already identifies all the command flags.  Define REQ_CLONE_MASK to be
the same as REQ_COMMON_MASK for clarity and make __blk_rq_prep_clone()
copy all flags in the mask.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

This patch converts md to support REQ_FLUSH/FUA instead of now
deprecated REQ_HARDBARRIER.  In the core part (md.c), the following
changes are notable.

* Unlike REQ_HARDBARRIER, REQ_FLUSH/FUA don't interfere with
  processing of other requests and thus there is no reason to mark the
  queue congested while FLUSH/FUA is in progress.

* REQ_FLUSH/FUA failures are final and its users don't need retry
  logic.  Retry logic is removed.

* Preflush needs to be issued to all member devices but FUA writes can
  be handled the same way as other writes - their processing can be
  deferred to request_queue of member devices.  md_barrier_request()
  is renamed to md_flush_request() and simplified accordingly.

For linear, raid0 and multipath, the core changes are enough.  raid1,
5 and 10 need the following conversions.

* raid1: Handling of FLUSH/FUA bio's can simply be deferred to
  request_queues of member devices.  Barrier related logic removed.

* raid5: Queue draining logic dropped.  FUA bit is propagated through
  biodrain and stripe resconstruction such that all the updated parts
  of the stripe are written out with FUA writes if any of the dirtying
  writes was FUA.  preread_active_stripes handling in make_request()
  is updated as suggested by Neil Brown.

* raid10: FUA bit needs to be propagated to write clones.

linear, raid0, 1, 5 and 10 tested.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reviewed-by: NNeil Brown <neilb@suse.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

VIRTIO_F_BARRIER is deprecated.  Replace it with VIRTIO_F_FLUSH
support.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Remove now unused REQ_HARDBARRIER support.  virtio_blk already
supports REQ_FLUSH and the usefulness of REQ_FUA for virtio_blk is
questionable at this point, so there's nothing else to do to support
new REQ_FLUSH/FUA interface.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Deprecate REQ_HARDBARRIER and implement REQ_FLUSH/FUA instead.  Also,
instead of checking file->f_op->fsync() directly, look at the value of
vfs_fsync() and ignore -EINVAL return.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Update blkdev_issue_flush() to use new REQ_FLUSH interface.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

rq->rq_disk and bio->bi_bdev->bd_disk may differ if a request has
passed through remapping drivers.  FSEQ_DATA request incorrectly
followed bio->bi_bdev->bd_disk ending up being issued w/ mismatching
rq_disk.  Make it follow orig_rq->rq_disk.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Tested-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

While completing a request from a REQ_FLUSH/FUA sequence, another
request can be pushed to the request queue.  If a driver tests
elv_queue_empty() before completing a request and runs the queue again
only if the queue wasn't empty, this may lead to hang.  Please note
that most drivers either kick the queue unconditionally or test queue
emptiness after completing the current request and don't have this
problem.

This patch removes this possibility by making REQ_FLUSH/FUA sequence
code kick the queue if the queue was empty before completing a request
from REQ_FLUSH/FUA sequence.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

init_flush_request() only set REQ_FLUSH when initializing flush
requests making them READ requests.  Use WRITE_FLUSH instead.
Signed-off-by: NTejun Heo <tj@kernel.org>
Reported-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

We need to call blk_rq_init and elv_insert for all cases in queue_next_fseq,
so take these calls into common code.  Also move the end_io initialization
from queue_flush into queue_next_fseq and rename queue_flush to
init_flush_request now that it's old name doesn't apply anymore.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

There are a number of make_request based drivers which don't support
cache flushes.  Filter out flush bio's in __generic_make_request() so
that they don't have to worry about them.  All FLUSH/FUA requests with
data are converted to regular IO requests and empty ones are completed
immediately.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Now that the backend conversion is complete, export sequenced
FLUSH/FUA capability through REQ_FLUSH/FUA flags.  REQ_FLUSH means the
device cache should be flushed before executing the request.  REQ_FUA
means that the data in the request should be on non-volatile media on
completion.

Block layer will choose the correct way of implementing the semantics
and execute it.  The request may be passed to the device directly if
the device can handle it; otherwise, it will be sequenced using one or
more proxy requests.  Devices will never see REQ_FLUSH and/or FUA
which it doesn't support.

Also, unlike the original REQ_HARDBARRIER, REQ_FLUSH/FUA requests are
never failed with -EOPNOTSUPP.  If the underlying device doesn't
support FLUSH/FUA, the block layer simply make those noop.  IOW, it no
longer distinguishes between writeback cache which doesn't support
cache flush and writethrough/no cache.  Devices which have WB cache
w/o flush are very difficult to come by these days and there's nothing
much we can do anyway, so it doesn't make sense to require everyone to
implement -EOPNOTSUPP handling.  This will simplify filesystems and
block drivers as they can drop -EOPNOTSUPP retry logic for barriers.

* QUEUE_ORDERED_* are removed and QUEUE_FSEQ_* are moved into
  blk-flush.c.

* REQ_FLUSH w/o data can also be directly passed to drivers without
  sequencing but some drivers assume that zero length requests don't
  have rq->bio which isn't true for these requests requiring the use
  of proxy requests.

* REQ_COMMON_MASK now includes REQ_FLUSH | REQ_FUA so that they are
  copied from bio to request.

* WRITE_BARRIER is marked deprecated and WRITE_FLUSH, WRITE_FUA and
  WRITE_FLUSH_FUA are added.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

With ordering requirements dropped, barrier and ordered are misnomers.
Now all block layer does is sequencing FLUSH and FUA.  Rename them to
flush.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Without ordering requirements, barrier and ordering are minomers.
Rename block/blk-barrier.c to block/blk-flush.c.  Rename of symbols
will follow.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Filesystems will take all the responsibilities for ordering requests
around commit writes and will only indicate how the commit writes
themselves should be handled by block layers.  This patch drops
barrier ordering by queue draining from block layer.  Ordering by
draining implementation was somewhat invasive to request handling.
List of notable changes follow.

* Each queue has 1 bit color which is flipped on each barrier issue.
  This is used to track whether a given request is issued before the
  current barrier or not.  REQ_ORDERED_COLOR flag and coloring
  implementation in __elv_add_request() are removed.

* Requests which shouldn't be processed yet for draining were stalled
  by returning -EAGAIN from blk_do_ordered() according to the test
  result between blk_ordered_req_seq() and blk_blk_ordered_cur_seq().
  This logic is removed.

* Draining completion logic in elv_completed_request() removed.

* All barrier sequence requests were queued to request queue and then
  trckled to lower layer according to progress and thus maintaining
  request orders during requeue was necessary.  This is replaced by
  queueing the next request in the barrier sequence only after the
  current one is complete from blk_ordered_complete_seq(), which
  removes the need for multiple proxy requests in struct request_queue
  and the request sorting logic in the ELEVATOR_INSERT_REQUEUE path of
  elv_insert().

* As barriers no longer have ordering constraints, there's no need to
  dump the whole elevator onto the dispatch queue on each barrier.
  Insert barriers at the front instead.

* If other barrier requests come to the front of the dispatch queue
  while one is already in progress, they are stored in
  q->pending_barriers and restored to dispatch queue one-by-one after
  each barrier completion from blk_ordered_complete_seq().
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Make the following cleanups in preparation of barrier/flush update.

* blk_do_ordered() declaration is moved from include/linux/blkdev.h to
  block/blk.h.

* blk_do_ordered() now returns pointer to struct request, with %NULL
  meaning "try the next request" and ERR_PTR(-EAGAIN) "try again
  later".  The third case will be dropped with further changes.

* In the initialization of proxy barrier request, data direction is
  already set by init_request_from_bio().  Drop unnecessary explicit
  REQ_WRITE setting and move init_request_from_bio() above REQ_FUA
  flag setting.

* add_request() is collapsed into __make_request().

These changes don't make any functional difference.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

REQ_HARDBARRIER is deprecated.  Remove spurious uses in the following
users.  Please note that other than osdblk, all other uses were
already spurious before deprecation.

* osdblk: osdblk_rq_fn() won't receive any request with
  REQ_HARDBARRIER set.  Remove the test for it.

* pktcdvd: use of REQ_HARDBARRIER in pkt_generic_packet() doesn't mean
  anything.  Removed.

* aic7xxx_old: Setting MSG_ORDERED_Q_TAG on REQ_HARDBARRIER is
  spurious.  Removed.

* sas_scsi_host: Setting TASK_ATTR_ORDERED on REQ_HARDBARRIER is
  spurious.  Removed.

* scsi_tcq: The ordered tag path wasn't being used anyway.  Removed.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NBoaz Harrosh <bharrosh@panasas.com>
Cc: James Bottomley <James.Bottomley@suse.de>
Cc: Peter Osterlund <petero2@telia.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Barrier is deemed too heavy and will soon be replaced by FLUSH/FUA
requests.  Deprecate barrier.  All REQ_HARDBARRIERs are failed with
-EOPNOTSUPP and blk_queue_ordered() is replaced with simpler
blk_queue_flush().

blk_queue_flush() takes combinations of REQ_FLUSH and FUA.  If a
device has write cache and can flush it, it should set REQ_FLUSH.  If
the device can handle FUA writes, it should also set REQ_FUA.

All blk_queue_ordered() users are converted.

* ORDERED_DRAIN is mapped to 0 which is the default value.
* ORDERED_DRAIN_FLUSH is mapped to REQ_FLUSH.
* ORDERED_DRAIN_FLUSH_FUA is mapped to REQ_FLUSH | REQ_FUA.
Signed-off-by: NTejun Heo <tj@kernel.org>
Acked-by: NBoaz Harrosh <bharrosh@panasas.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: Stefan Weinhuber <wein@de.ibm.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Nobody is making meaningful use of ORDERED_BY_TAG now and queue
draining for barrier requests will be removed soon which will render
the advantage of tag ordering moot.  Kill ORDERED_BY_TAG.  The
following users are affected.

* brd: converted to ORDERED_DRAIN.
* virtio_blk: ORDERED_TAG path was already marked deprecated.  Removed.
* xen-blkfront: ORDERED_TAG case dropped.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

loop implements FLUSH using fsync but was incorrectly setting its
ordered mode to DRAIN.  Change it to DRAIN_FLUSH.  In practice, this
doesn't change anything as loop doesn't make use of the block layer
ordered implementation.
Signed-off-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

Unplugging from a request function doesn't really help much (it's
already in the request_fn) and soon block layer will be updated to mix
barrier sequence with other commands, so there's no need to treat
queue flushing any differently.

ide was the only user of blk_queue_flushing().  Remove it.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>

* 'kvm-updates/2.6.36' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PIT: free irq source id in handling error path
  KVM: destroy workqueue on kvm_create_pit() failures
  KVM: fix poison overwritten caused by using wrong xstate size

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: (58 commits)
  drm/i915,intel_agp: Add support for Sandybridge D0
  drm/i915: fix render pipe control notify on sandybridge
  agp/intel: set 40-bit dma mask on Sandybridge
  drm/i915: Remove the conflicting BUG_ON()
  drm/i915/suspend: s/IS_IRONLAKE/HAS_PCH_SPLIT/
  drm/i915/suspend: Flush register writes before busy-waiting.
  i915: disable DAC on Ironlake also when doing CRT load detection.
  drm/i915: wait for actual vblank, not just 20ms
  drm/i915: make sure eDP PLL is enabled at the right time
  drm/i915: fix VGA plane disable for Ironlake+
  drm/i915: eDP mode set sequence corrections
  drm/i915: add panel reset workaround
  drm/i915: Enable RC6 on Ironlake.
  drm/i915/sdvo: Only set is_lvds if we have a valid fixed mode.
  drm/i915: Set up a render context on Ironlake
  drm/i915 invalidate indirect state pointers at end of ring exec
  drm/i915: Wake-up wait_request() from elapsed hang-check (v2)
  drm/i915: Apply i830 errata for cursor alignment
  drm/i915: Only update i845/i865 CURBASE when disabled (v2)
  drm/i915: FBC is updated within set_base() so remove second call in mode_set()
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/slab-2.6:
  slab: fix object alignment
  slub: add missing __percpu markup in mm/slub_def.h

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ryusuke/nilfs2:
  nilfs2: wait for discard to finish

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

This one is missed in last pipe control fix for sandybridge,
that really unmask interrupt bit for notify in render engine IMR.
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

We now attempt to free "active" objects following a GPU hang as either
the GPU will be reset or the hang is permenant. In either case, the GPU
writes will not be flushed to main memory and it should be safe to
return that memory back to the system.

The BUG_ON(active) is thus overkill and can erroneously fire after a
EIO.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

For the shared paths on the next generation chipsets.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NEric Anholt <eric@anholt.net>

Like on Sandybridge, disabling the DAC here when doing CRT load detect
avoids forever hangs waiting on the hardware.

test procedure on HP 2740p:
boot with no VGA plugged in, start X,
plug in VGA monitor (1280x1024)
chvt 3
machine hangs waiting forever.
Signed-off-by: NDave Airlie <airlied@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

Waiting for a hard coded 20ms isn't always enough to make sure a vblank
period has actually occurred, so add code to make sure we really have
passed through a vblank period (or that the pipe is off when disabling).

This prevents problems with mode setting and link training, and seems to
fix a bug like https://bugs.freedesktop.org/show_bug.cgi?id=29278, but
on an HP 8440p instead.  Hopefully also fixes
https://bugs.freedesktop.org/show_bug.cgi?id=29141.
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NEric Anholt <eric@anholt.net>

With the introduction of the new unified work queue thread pools,
we lost one feature: It's no longer possible to know which worker
is causing the CPU to wake out of idle. The result is that PowerTOP
now reports a lot of "kworker/a:b" instead of more readable results.

This patch adds a pair of tracepoints to the new workqueue code,
similar in style to the timer/hrtimer tracepoints.

With this pair of tracepoints, the next PowerTOP can correctly
report which work item caused the wakeup (and how long it took):

Interrupt (43)            i915      time   3.51ms    wakeups 141
Work      ieee80211_iface_work      time   0.81ms    wakeups  29
Work              do_dbs_timer      time   0.55ms    wakeups  24
Process                   Xorg      time  21.36ms    wakeups   4
Timer    sched_rt_period_timer      time   0.01ms    wakeups   1
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.infradead.org/mtd-2.6:
  mtd: nand: Fix probe of Samsung NAND chips
  mtd: nand: Fix regression in BBM detection
  pxa3xx: fix ns2cycle equation

The "Configure" word tends to make user believe they have to say 'yes'
to be able to choose the number of procs/nodes.  "Enable" should be
unambiguous enough.
Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Like the mlock() change previously, this makes the stack guard check
code use vma->vm_prev to see what the mapping below the current stack
is, rather than have to look it up with find_vma().

Also, accept an abutting stack segment, since that happens naturally if
you split the stack with mlock or mprotect.
Tested-by: NIan Campbell <ijc@hellion.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If we've split the stack vma, only the lowest one has the guard page.
Now that we have a doubly linked list of vma's, checking this is trivial.
Tested-by: NIan Campbell <ijc@hellion.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>