- 16 11月, 2013 11 次提交
-
-
由 Alex Deucher 提交于
After adjusting the dpm parameters this seems to be stable on most TN systems. DPM is important for APUs since the boot clocks are generally pretty low. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
Adjust some of the TN dpm settings for stability. Enabling these features causes hangs and other stability problems on certain boards. v2: leave uvd dpm enabled Bug: https://bugzilla.kernel.org/show_bug.cgi?id=63101Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Andrew Lewycky 提交于
A single doorbell page is plenty for cik kms compute. Use a single page and manage doorbell allocation by individual doorbells rather than pages. Identify doorbells by their index rather than byte offset. Signed-off-by: NAndrew Lewycky <Andrew.Lewycky@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
If we fail to allocate an indirect buffer (ib) when updating the ptes, return an error instead of trying to use the ib. Avoids a null pointer dereference. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=58621Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Christian König 提交于
Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Christian König 提交于
To workaround bugs and/or certain limits it's sometimes useful to fall back to waiting on fences. Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Christian König 提交于
Signed-off-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Jerome Glisse 提交于
GPU with low amount of ram can fails at pinning new framebuffer before unpinning old one. On such failure, retry with unpinning old one before pinning new one allowing to work around the issue. This is somewhat ugly but only affect those old GPU we care about. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Jerome Glisse 提交于
Useless to count the register index in number of bytes we are writing. Fixes a regression with hw i2c enabled. Signed-off-by: NJerome Glisse <jglisse@redhat.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alex Deucher 提交于
With CONFIG_ACPI=n the following build warning is seen: drivers/gpu/drm/radeon/cypress_dpm.c:302:31: warning: unused variable 'eg_pi' [-Wunused-variable] Protect eg_pi with CONFIG_ACPI. Based on patch from: Fabio Estevam <fabio.estevam@freescale.com> but doesn't mix allocation and code. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Fabio Estevam 提交于
With CONFIG_ACPI=n the following build warning is seen: drivers/gpu/drm/radeon/ni_dpm.c:3448:31: warning: unused variable 'eg_pi' [-Wunused-variable] Move the definition of eg_pi inside the CONFIG_ACPI 'if' block. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 15 11月, 2013 2 次提交
-
-
由 David Herrmann 提交于
We moved minor deallocation to drm_dev_free() in: commit 8f6599da Author: David Herrmann <dh.herrmann@gmail.com> Date: Sun Oct 20 18:55:45 2013 +0200 drm: delay minor destruction to drm_dev_free() However, this causes a call to drm_unplug_minor(), which should just do nothing as drm_dev_unregister() already called this. But a separate patch caused kdev lifetime changes: commit 5bdebb18 Author: Dave Airlie <airlied@redhat.com> Date: Fri Oct 11 14:07:25 2013 +1000 drm/sysfs: sort out minor and connector device object lifetimes. Thus making our dev_is_registered() call useles (and even segfault if it is NULL). Replace it with a simple !kdev test and we're fine. Reported-by: NHuax Lu <huax.lu@intel.com> Reported-by: NDaniel Vetter <daniel@ffwll.ch> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=71208Tested-by: Nlu hua <huax.lu@intel.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NDave Airlie <airlied@gmail.com>
-
由 Dave Airlie 提交于
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next - Page flipping fixes, with support for syncing them to vblank (finally...). - Misc other general fixes * 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: do not map evicted vram buffers in nouveau_bo_vma_add drm/nvc0-/gr: shift wrapping bug in nvc0_grctx_generate_r406800 drm/nouveau/pwr: fix missing mutex unlock in a failure path drm/nv40/therm: fix slowing down fan when pstate undefined drm/nv11-: synchronise flips to vblank, unless async flip requested drm/nvc0-: remove nasty fifo swmthd hack for flip completion method drm/nv10-: we no longer need to create nvsw object on user channels drm/nouveau: always queue flips relative to kernel channel activity drm/nouveau: there is no need to reserve/fence the new fb when flipping drm/nouveau: when bailing out of a pushbuf ioctl, do not remove previous fence drm/nouveau: allow nouveau_fence_ref() to be a noop drm/nvc8/mc: msi rearm is via the nvc0 method
-
- 14 11月, 2013 16 次提交
-
-
由 Maarten Lankhorst 提交于
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Dan Carpenter 提交于
We care about the upper 32 bits here so we have to use 1ULL instead of 1 to avoid a shift wrapping bug. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Not required anymore as flips are always done on the kernel's channel, which means we can use a proper software object class instead. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Cc: stable@vger.kernel.org Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
One last patch I keep forgetting to include. Fix for EDID quirk handling. Been on the list and reviewed for several months now, I just keep forgetting about it. * 'drm-next-3.13' of git://people.freedesktop.org/~agd5f/linux: drm/edid: compare actual vrefresh for all modes for quirks
-
由 Dave Airlie 提交于
Merge tag 'drm-intel-fixes-2013-11-12' of git://people.freedesktop.org/~danvet/drm-intel into drm-next Just one patch to fix compile fail for CONFIG_ACPI=n. Figured I better send this out quickly to minimize the broken build span. Otherwise no bugfixes (besides some bdw stuff) anywhere in sight. * tag 'drm-intel-fixes-2013-11-12' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915/opregion: fix build error on CONFIG_ACPI=n
-
git://people.freedesktop.org/~thomash/linux由 Dave Airlie 提交于
The page-prot bit fix. * 'ttm-next-3.13' of git://people.freedesktop.org/~thomash/linux: drm/ttm: Fix vma page_prot bit manipulation
-
git://people.freedesktop.org/~thomash/linux由 Dave Airlie 提交于
A resource eviction fix, and a fix for compilation / sparse problems from the previous pull. * 'vmwgfx-next-3.13' of git://people.freedesktop.org/~thomash/linux: drm/vmwgfx: Fix a couple of compile / sparse warnings and errors drm/vmwgfx: Resource evict fixes
-
- 13 11月, 2013 3 次提交
-
-
由 Thomas Hellstrom 提交于
Fix a long-standing TTM issue where we manipulated the vma page_prot bits while mmap_sem was taken in read mode only. We now make a local copy of the vma structure which we pass when we set the ptes. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Reviewed-by: NJerome Glisse <jglisse@redhat.com>
-
由 Thomas Hellstrom 提交于
Fixes *) an implicit function declaration on mips, *) a defined but not used label on !CONFIG_INTEL_IOMMU *) Hopefully a couple of sparse warnings where we implicitly typecast integer to __le32 and vice versa. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Reviewed-by: NBrian Paul <brianp@vmware.com>
-
由 Thomas Hellstrom 提交于
Fix an error message that was incorrectly blaming device resource id shortage. Also make sure we correctly catch resource eviction errors, that could otherwise lead to evictable resources temporarily not being on the LRU list. Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com> Reviewed-by: NJakob Bornecrantz <jakob@vmware.com> Cc: stable@vger.kernel.org
-
- 12 11月, 2013 1 次提交
-
-
由 Alex Deucher 提交于
The vrefresh field of the mode is 0 for most modes fetched from the EDID (e.g., established timings). When dealing with monitors that have a bogus preferred mode, we may not always select the mode we want because we compare the target refresh to the mode's vrefresh which is 0 in a lot of cases. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
-
- 11 11月, 2013 1 次提交
-
-
git://github.com/patjak/drm-gma500由 Dave Airlie 提交于
SDVO support for minnowboard * 'gma500-next' of git://github.com/patjak/drm-gma500: drm/gma500/mrst: Add SDVO to output init drm/gma500/mrst: Don't blindly guess a mode for LVDS drm/gma500/mrst: Setup GMBUS for oaktrail/mrst drm/gma500/mrst: Replace WMs and chickenbits with values from EMGD drm/gma500/mrst: Add aux register writes to SDVO drm/gma500/mrst: Properly route oaktrail hdmi hooks drm/gma500/mrst: Add aux register writes when programming pipe drm/gma500/mrst: Add SDVO clock calculation drm/gma500: Add aux device support for gmbus drm/gma500: Add support for aux pci vdc device drm/gma500: Add chip specific sdvo masks drm/gma500: Add Minnowboard to the IS_MRST() macro
-
- 10 11月, 2013 5 次提交
-
-
由 Laurent Pinchart 提交于
Turn clk_enable() and clk_disable() calls into clk_prepare_enable() and clk_disable_unprepare() to get ready for the migration to the common clock framework. Cc: David Airlie <airlied@linux.ie> Cc: dri-devel@lists.freedesktop.org Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
Merge tag 'bdw-stage1-2013-11-08-v2' of git://people.freedesktop.org/~danvet/drm-intel into drm-next So here's the Broadwell pull request. From a kernel driver pov there's two areas with big changes in Broadwell: - Completely new enumerated interrupt bits. On the plus side it now looks fairly unform and sane. - Completely new pagetable layout. To ensure minimal impact on existing platforms we've refactored both the irq and low-level gtt handling code a lot in anticipation of the bdw push. So now bdw enabling in these areas just plugs in a bunch of vfuncs. Otherwise it's all fairly harmless adjusting of switch cases and if-ladders to shovel bdw into the right blocks. So minimized impact on existing platforms. I've also merged the bdw-stage1 branch into our -nightly integration branch for the past week to make sure we don't break anything. Note that there's still quite a flurry or patches floating around, but I've figured I'll push this out. I plan to keep the bdw fixes separate from my usual -fixes stream so that you can reject them easily in case it still looks like too much churn. Also, bdw is for now hidden behind the preliminary hw enabling module option. So there's no real pressure to get follow-up patches all into 3.13. * tag 'bdw-stage1-2013-11-08-v2' of git://people.freedesktop.org/~danvet/drm-intel: (75 commits) drm/i915: Mask the vblank interrupt on bdw by default drm/i915: Wire up cpu fifo underrun reporting support for bdw drm/i915: Optimize gen8_enable|disable_vblank functions drm/i915: Wire up pipe CRC support for bdw drm/i915: Wire up PCH interrupts for bdw drm/i915: Wire up port A aux channel drm/i915: Fix up the bdw pipe interrupt enable lists drm/i915: Optimize pipe irq handling on bdw drm/i915/bdw: Take render error interrupt out of the mask drm/i915/bdw: Add BDW PCH check first drm/i915: Use hsw_crt_get_config on BDW drm/i915/bdw: Change dp aux timeout to 600us on DDIA drm/i915/bdw: Enable trickle feed on Broadwell drm/i915/bdw: WaSingleSubspanDispatchOnAALinesAndPoints drm/i915/bdw: conservative SBE VUE cache mode drm/i915/bdw: Limit SDE poly depth FIFO to 2 drm/i915/bdw: Sampler power bypass disable ddrm/i915/bdw: Disable centroid pixel perf optimization drm/i915/bdw: BWGTLB clock gate disable drm/i915/bdw: Implement edp PSR workarounds ...
-
git://people.freedesktop.org/~agd5f/linux由 Dave Airlie 提交于
A few more patches for 3.13. The big one here is Hawaii support. I wanted to get that out sooner, but was sick earlier this week. That said, it's mostly self contained, so it shouldn't impact other asics. The rest are just bug fixes and a merge fix. * 'drm-next-3.13' of git://people.freedesktop.org/~agd5f/linux: (23 commits) Revert "drm/radeon/audio: don't set speaker allocation on DCE4+" drm/radeon/audio: improve ACR calculation drm/radeon/audio: correct ACR table drm/radeon: fix mismerge of drm-next with 3.12 drm/radeon: add pci ids for hawaii drm/radeon: fill in radeon_asic_init for hawaii drm/radeon: modesetting updates for hawaii drm/radeon: atombios.h updates for hawaii drm/radeon: update cik_get_csb_buffer for hawaii drm/radeon: add hawaii dpm support drm/radeon/cik: add hawaii UVD support drm/radeon: update firmware loading for hawaii drm/radeon: update rb setup for hawaii drm/radeon: add golden register settings for hawaii drm/radeon: update cik_tiling_mode_table_init() for hawaii drm/radeon: minor updates to cik.c for hawaii drm/radeon: update cik_gpu_init() for hawaii drm/radeon: add Hawaii chip family drm/radeon: fix-up some float to fixed conversion thinkos drm/radeon: use HDP_MEM_COHERENCY_FLUSH_CNTL for sdma as well ...
-
git://people.freedesktop.org/~robclark/linux由 Dave Airlie 提交于
prime support, inactive rework, render nodes * 'msm-next' of git://people.freedesktop.org/~robclark/linux: drm/msm/mdp4: page_flip cleanups/fixes drm/msm: EBUSY status handling in msm_gem_fault() drm/msm: rework inactive-work drm/msm: add plane support drm/msm: resync generated headers drm/msm: support render nodes drm/msm: prime support
-
由 Dave Airlie 提交于
This uses the proper div macro. Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 09 11月, 2013 1 次提交
-
-
由 Jani Nikula 提交于
Fix CONFIG_ACPI=n build fail CC drivers/gpu/drm/i915/intel_opregion.o drivers/gpu/drm/i915/intel_opregion.c: In function ‘intel_opregion_setup’: drivers/gpu/drm/i915/intel_opregion.c:879:2: error: ‘asle_work’ undeclared (first use in this function) drivers/gpu/drm/i915/intel_opregion.c:879:2: note: each undeclared identifier is reported only once for each function it appears in make[4]: *** [drivers/gpu/drm/i915/intel_opregion.o] Error 1 introduced in commit 91a60f20 Author: Jani Nikula <jani.nikula@intel.com> Date: Thu Oct 31 18:55:48 2013 +0200 drm/i915: move opregion asle request handling to a work queue Reported-by: NJim Davis <jim.epost@gmail.com> Reference: http://lkml.kernel.org/r/CA+r1ZhjcFpr5KKVX0pLCOP8cAyZoiYO=UyqYMJtNSV-Kt_p7xQ@mail.gmail.comSigned-off-by: NJani Nikula <jani.nikula@intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
-