T4, Cell, powernv, and pseries had the same implementation, so switch
them to use a generic version. A2 apparently had a version, but
removed it at some point, so we remove the declaration, too.
Signed-off-by: NAndy Fleming <afleming@freescale.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Although the shared_proc field in the lppaca works today, it is
not architected. A shared processor partition will always have a non
zero yield_count so use that instead. Create a wrapper so users
don't have to know about the details.

In order for older kernels to continue to work on KVM we need
to set the shared_proc bit. While here, remove the ugly bitfield.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Address some of the trivial sparse warnings in arch/powerpc.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

plpar_get_term_char is only used once and just adds a layer
of complexity to H_GET_TERM_CHAR. plpar_put_term_char isn't
used at all so we can remove it.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The function pci_devs_phb_init is invoked more earlier than we really
probe the pci controller, so it does nothing at all. And we also don't
need the pci_dn stuff for the fsl powerpc64 boards, just remove it.

It also seems that we don't support ISA on all the current corenet ds
boards. So picking a primary bus seems useless, remove that function
too.
Signed-off-by: NKevin Hao <haokexin@gmail.com>

The p1020rdb-pd has the similar feature as the p1020rdb.
Therefore, p1020rdb-pd use the same platform file as the p1/p2 rdb board.
Overview of P1020RDB-PD platform:
- DDR3 2GB
- NOR flash 64MB
- NAND flash 128MB
- SPI flash 16MB
- I2C EEPROM 256Kb
	- eTSEC1 (RGMII PHY) connected to VSC7385 L2 switch
	- eTSEC2 (SGMII PHY)
- eTSEC3 (RGMII PHY)
	- SDHC
	- 2 USB ports
	- 4 TDM ports
	- PCIe
Signed-off-by: NHaijun Zhang <Haijun.Zhang@freescale.com>
Signed-off-by: NJerry Huang <Chang-Ming.Huang@freescale.com>
CC: Scott Wood <scottwood@freescale.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>

Mark pnv_pci_init_ioda2_phb() as __init.  It is called only from an
init function (pnv_pci_init()), and it calls an init function
(pnv_pci_init_ioda_phb()):

    pnv_pci_init                # init
      pnv_pci_init_ioda2_phb    # non-init
	pnv_pci_init_ioda_phb   # init

This should fix a section mismatch warning.
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Commit 801eb73f introduced
a bug while checking PTE flags. We have to drop the _PAGE_COHERENT flag
when __PAGE_NO_CACHE is set and the cache update policy is not write-through
(i.e. _PAGE_WRITETHRU is not set)
Signed-off-by: NDenis Kirjanov <kda@linux-powerpc.org>
Reviewed-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
CC:  Michael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The patch introduces flag EEH_DEV_SYSFS to keep track that the sysfs
entries for the corresponding EEH device (then PCI device) has been
added or removed, in order to avoid race condition.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

While restoring BARs for one specific PCI device, the pci_dev
instance should have been released. So it's not reliable to use
the pci_dev instance on restoring BARs. However, we still need
some information (e.g. PCIe capability position, header type) from
the pci_dev instance. So we have to store those information to
EEH device in advance.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

When EEH error happens to one specific PE, some devices with drivers
supporting EEH won't except hotplug on the device. However, there
might have other deivces without driver, or with driver without EEH
support. For the case, we need do partial hotplug in order to make
sure that the PE becomes absolutely quite during reset. Otherise,
the PE reset might fail and leads to failure of error recovery.

The current code doesn't handle that 'mixed' case properly, it either
uses the error callbacks to the drivers, or tries hotplug, but doesn't
handle a PE (EEH domain) composed of a combination of the two.

The patch intends to support so-called "partial" hotplug for EEH:
Before we do reset, we stop and remove those PCI devices without
EEH sensitive driver. The corresponding EEH devices are not detached
from its PE, but with special flag. After the reset is done, those
EEH devices with the special flag will be scanned one by one.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

During Machine Check interrupt on pseries platform, R3 generally points to
memory region inside RTAS (FWNMI) area. We see r3 corruption because when RTAS
delivers the machine check exception it passes the address inside FWNMI area
with the top most bit set. This patch fixes this issue by masking top two bit
in machine check exception handler.
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The Kconfig symbol HOTPLUG was removed with commit 40b31360 ("Finally
eradicate CONFIG_HOTPLUG"). But there's still one select statement for
that symbol. It seems that select statement was added after the patch to
remove CONFIG_HOTPLUG was submitted. Anyhow, it is useless and can be
dropped.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Reviewed-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The driver provides a way to wake up the system by the MPIC timer.

For example,
echo 5 > /sys/devices/system/mpic/timer_wakeup
echo standby > /sys/power/state

After 5 seconds the MPIC timer will generate an interrupt to wake up
the system.
Signed-off-by: NWang Dongsheng <dongsheng.wang@freescale.com>
Signed-off-by: NZhao Chenhui <chenhui.zhao@freescale.com>
Signed-off-by: NLi Yang <leoli@freescale.com>

The MPIC global timer is a hardware timer inside the Freescale PIC complying
with OpenPIC standard. When the specified interval times out, the hardware
timer generates an interrupt. The driver currently is only tested on fsl chip,
but it can potentially support other global timers complying to OpenPIC
standard.

The two independent groups of global timer on fsl chip, group A and group B,
are identical in their functionality, except that they appear at different
locations within the PIC register map. The hardware timer can be cascaded to
create timers larger than the default 31-bit global timers. Timer cascade
fields allow configuration of up to two 63-bit timers. But These two groups
of timers cannot be cascaded together.

It can be used as a wakeup source for low power modes. It also could be used
as periodical timer for protocols, drivers and etc.
Signed-off-by: NWang Dongsheng <dongsheng.wang@freescale.com>
Signed-off-by: NLi Yang <leoli@freescale.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>

With the patch 7230c564 (powerpc: Rework lazy-interrupt handling),
it seems that the coreint works pretty well on the 85xx 64bit kernel.
So use the coreint by default for these boards.
Signed-off-by: NKevin Hao <haokexin@gmail.com>
Signed-off-by: NScott Wood <scottwood@freescale.com>

irq_eoi() is already called by generic_handle_irq() so
it shall not be called a again
Signed-off-by: NChristophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: NScott Wood <scottwood@freescale.com>

The patch set supports compression of oops messages while writing to NVRAM,
this helps in capturing more of oops data to lnx,oops-log. The pstore file
for oops messages will be in decompressed format making it readable.

In case compression fails, the patch takes care of copying the header added
by pstore and last oops_data_sz bytes of big_oops_buf to NVRAM so that we
have recent oops messages in lnx,oops-log.

In case decompression fails, it will result in absence of oops file but still
have files (in /dev/pstore) for other partitions.
Signed-off-by: NAruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

nvram_compress() and zip_oops() is used by the nvram_pstore_write
API to compress oops messages hence re-organise the functions
accordingly to avoid forward declarations.
Signed-off-by: NAruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Header size is needed to distinguish between header and the dump data.
Incorporate the addition of new argument (hsize) in the pstore write
callback.
Signed-off-by: NAruna Balakrishnaiah <aruna@linux.vnet.ibm.com>
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

So because those things always end up in trainwrecks... In 7846de40
we moved back the iommu initialization earlier, essentially undoing
37f02195 which was causing us endless trouble... except that in the
meantime we had merged 959c9bdd (to workaround the original breakage)
which is now ... broken :-)

This fixes it by doing a partial revert of the latter (we keep the
ppc_md. path which will be needed in the hotplug case, which happens
also during some EEH error recovery situations).
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.10]

On LPAR systems we need to inform the hypervisor that we are using the
EBB registers. We do this by setting a bit in the Virtual Processor Area
(VPA) - formerly known as the lppaca.

For now we do this always, ie. we do not dynamically enable/disable.
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

This removes all the powerpc uses of the __cpuinit macros.  There
are no __CPUINIT users in assembly files in powerpc.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Josh Boyer <jwboyer@gmail.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Currently, we're using the combo (PCI bus + devfn) in the PCI
config accessors and PCI config accessors in EEH depends on them.
However, it's not safe to refer the PCI bus which might have been
removed during hotplug. So we're using device node in the PCI
config accessors and the corresponding backends just reuse them.

The patch also fix one potential risk: We possiblly have frozen
PE during the early PCI probe time, but we haven't setup the PE
mapping yet. So the errors should be counted to PE#0.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We needn't the the whole backtrace other than one-line message in
the error reporting interrupt handler. For errors triggered by
access PCI config space or MMIO, we replace "WARN(1, ...)" with
pr_err() and dump_stack(). The patch also adds more output messages
to indicate what EEH core is doing. Besides, some printk() are
replaced with pr_warning().
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

On the PowerNV platform, the EEH address cache isn't built correctly
because we skipped the EEH devices without binding PE. The patch
fixes that.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We have 2 fields in "struct pnv_phb" to trace the states. The patch
replace the fields with one and introduces flags for that. The patch
doesn't impact the logic.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Signed-off-by: NSebastien Bessiere <sebastien.bessiere@gmail.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

While running Linux as guest on top of phyp, we possiblly have
PE that includes single PCI device. However, we didn't return
its PCI bus correctly and it leads to failure on recovery from
EEH errors for single-dev-PE. The patch fixes the issue.

Cc: <stable@vger.kernel.org> # v3.7+
Cc: Steve Best <sbest@us.ibm.com>
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

new helpers - dir_emit_dot(file, ctx, dentry), dir_emit_dotdot(file, ctx),
dir_emit_dots(file, ctx).
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

commit f8f7d63f ("powerpc/eeh: Trace eeh
device from I/O cache") broke EEH on pseries for devices that were
present during boot and have not been hotplugged/DLPARed.

eeh_check_failure will get the eeh_dev from the cache, and will get
NULL. eeh_addr_cache_build adds the addresses to the cache, but eeh_dev
for the giving pci_device is not set yet. Just reordering the call to
eeh_addr_cache_insert_dev works fine. The ordering is similar to the one
in eeh_add_device_late.
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com>
Acked-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Use the module_i2c_driver() macro to make the code smaller
and a bit simpler.

dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NScott Wood <scottwood@freescale.com>

Only part of MPC5125 reset module is like as MPC5121.
In detail, RCWH register doesn't contain informations about:
- PCI arbiter
- NAND flash page size
- NAND flash port size

For this reason, in device tree, this module has a different name then
MPC5121 reset module but use the same "struct mpc512x_reset_module"
register definition and the same restart procedure.
Signed-off-by: NMatteo Facchinetti <engineering@sirius-es.it>
Signed-off-by: NAnatolij Gustschin <agust@denx.de>

Hugepage invalidate involves invalidating multiple hpte entries.
Optimize the operation using H_BULK_REMOVE on lpar platforms.
On native, reduce the number of tlb flush.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

We now have pmd entries covering 16MB range and the PMD table double its original size.
We use the second half of the PMD table to deposit the pgtable (PTE page).
The depoisted PTE page is further used to track the HPTE information. The information
include [ secondary group | 3 bit hidx | valid ]. We use one byte per each HPTE entry.
With 16MB hugepage and 64K HPTE we need 256 entries and with 4K HPTE we need
4096 entries. Both will fit in a 4K PTE page. On hugepage invalidate we need to walk
the PTE page and invalidate all valid HPTEs.

This patch implements necessary arch specific functions for THP support and also
hugepage invalidate logic. These PMD related functions are intentionally kept
similar to their PTE counter-part.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

If a hash bucket gets full, we "evict" a more/less random entry from it.
When we do that we don't invalidate the TLB (hpte_remove) because we assume
the old translation is still technically "valid". This implies that when
we are invalidating or updating pte, even if HPTE entry is not valid
we should do a tlb invalidate. With hugepages, we need to pass the correct
actual page size value for tlb invalidation.

This change update the patch 0608d692
"powerpc/mm: Always invalidate tlb on hpte invalidate and update" to handle
transparent hugepages correctly.
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The patch creates debugfs entries (powerpc/PCIxxxx/err_injct) for
injecting EEH errors for testing purpose.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The patch creates one debugfs directory ("powerpc/PCIxxxx") for
each PHB so that we can hook EEH error injection debugfs entry
there in proceeding patch.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The patch registers OPAL event notifier and process the PCI errors
from firmware. If we have pending PCI errors, special EEH event
(without binding PE) will be sent to EEH core for processing.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

While we're restarting or powering off the system, we needn't
the OPAL notifier any more. So just to disable that.
Signed-off-by: NGavin Shan <shangw@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>