If you try to build a kernel with KCONFIG_CONFIG set (to a value
not equal to .config) and that config sets CONFIG_IKCONFIG then the
build will fail with:

make[1]: *** No rule to make target `.config', needed by \
`kernel/config_data.gz'.  Stop.

because the kernel/Makefile contains a direct reference to .config.

This issue has been present since the introduction of KCONFIG_CONFIG
in 14cdd3c4.
Signed-off-by: NBen Gardiner <bengardiner@nanometrics.ca>
CC: Roman Zippel <zippel@linux-m68k.org>
CC: Michal Marek <mmarek@suse.cz>
Reviewed-by: NMichal Marek <mmarek@suse.cz>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Add 'sparc32' ARCH target to test all{yes,mod}config for 32-bit build.
Signed-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The config option used by archs to let the build system know that
the C version of the recordmcount works for said arch is currently
called HAVE_C_MCOUNT_RECORD which enables BUILD_C_RECORDMCOUNT. To
be more consistent with the name that all archs may use, it has been
renamed to HAVE_C_RECORDMCOUNT. This will be less confusing since
we are building a C recordmcount and not a mcount_record.
Suggested-by: NIngo Molnar <mingo@elte.hu>
Cc: <linux-arch@vger.kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Cc: John Reiser <jreiser@bitwagon.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

This patch adds the support for the C version of recordmcount and
compile times show ~ 12% improvement.

After verifying this works, other archs can add:

 HAVE_C_MCOUNT_RECORD

in its Kconfig and it will use the C version of recordmcount
instead of the perl version.

Cc: <linux-arch@vger.kernel.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: linux-kbuild@vger.kernel.org
Cc: John Reiser <jreiser@bitwagon.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

base patch to implement 'jump labeling'. Based on a new 'asm goto' inline
assembly gcc mechanism, we can now branch to labels from an 'asm goto'
statment. This allows us to create a 'no-op' fastpath, which can subsequently
be patched with a jump to the slowpath code. This is useful for code which
might be rarely used, but which we'd like to be able to call, if needed.
Tracepoints are the current usecase that these are being implemented for.
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NJason Baron <jbaron@redhat.com>
LKML-Reference: <ee8b3595967989fdaf84e698dc7447d315ce972a.1284733808.git.jbaron@redhat.com>

[ cleaned up some formating ]
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The list of patterns for the external modules case was constantly
lagging behind.
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NMichal Marek <mmarek@suse.cz>

With current gcc, compiling with both -pg and -fomit-frame-pointer is
not allowed.  However, -pg can be used to build without actually
specifying -fno-omit-frame-pointer, upon which the default behaviour
for the target will be used.

On ARM, it is not possible to build a Thumb-2 kernel with
-fno-omit-frame-pointer (FRAME_POINTERS depends on !THUMB2_KERNEL). In
order to support ftrace for Thumb-2, we need to be able to allow a
combination of FUNCTION_TRACER and !FRAME_POINTER.  We do this by
omitting -fomit-frame-pointer if ftrace is enabled.
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NRabin Vincent <rabin@rab.in>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Brice reported that 'kernelrelease' has a dependence on include/config/kernel.release,
causes this file to be regenerated every time when invoke it. It doesn't have to.
Reported-by: NBrice Goglin <Brice.Goglin@inria.fr>
Tested-by: NBrice Goglin <Brice.Goglin@inria.fr>
Signed-off-by: NWANG Cong <amwang@redhat.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Signed-off-by: NYegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

It is now possible to assign options to AS and CC
on the command line - which is only used for built-in code.

{A,C}FLAGS_KERNEL was used both in the top-level Makefile
in the arch makefiles, thus users had no way to specify
additional options to AS, CC without overriding
the original value.

Introduce a new set of variables KBUILD_{A,C}FLAGS_KERNEL
that is used by arch specific files and free up
{A,C}FLAGS_KERNEL so they can be assigned on
the command line.

All arch Makefiles that used the old variables has been updated.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

It is now possible to assign options to AS, CC and LD
on the command line - which is only used when building modules.

{A,C,LD}FLAGS_MODULE was all used both in the top-level Makefile
in the arch makefiles, thus users had no way to specify
additional options to AS, CC, LD when building modules
without overriding the original value.

Introduce a new set of variables KBUILD_{A,C,LD}FLAGS_MODULE
that is used by arch specific files and free up
{A,C,LD}FLAGS_MODULE so they can be assigned on
the command line.

All arch Makefiles that used the old variables has been updated.

Note: Previously we had a MODFLAGS variable for both
AS and CC. But in favour of consistency this was dropped.
So in some cases arch Makefile has one assignmnet replaced by
two assignmnets.

Note2: MODFLAGS was not documented and is dropped
without any notice. I do not expect much/any breakage
from this.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: Haavard Skinnemoen <hskinnemoen@atmel.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Chen Liqin <liqin.chen@sunplusct.com>
Acked-by: Mike Frysinger <vapier@gentoo.org> [blackfin]
Acked-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com> [avr32]
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Newer gcc has a -femit-struct-debug-baseonly option that dramatically
reduces the size of object files with debug info. What it does
is to only emit type information for structures when the structures
are defined in the same file or in a header file.

This means the type information for most headers are not included.
This is not good when the type information is actually
needed (e.g. with kgdb or systemtap)

But often kernel hackers only care about line numbers and don't
need all the type information anyways. In this case setting
the option can be a big win:

A build dir for a specific x86-64 configuration with gcc 4.5
shrunk from 2.3G to 1.2G. The compilation was also nearly a minute
faster.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
[mmarek: reformatted help text]
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Commit 0a564b26 broke LOCALVERSION for O=... builds. Ouch.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Reported-and-tested-by: NRafael J. Wysocki <rjw@sisk.pl>
Reported-by: NPeter Anvin <hpa@zytor.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Variables given on the make commandline are not exported to $(shell
...) commands, so run the setlocalversion script in the make rule
directly.
Signed-off-by: NMichal Marek <mmarek@suse.cz>

After commit 85a256d8, 'make kernelrelease'
doesn't show the correct full kernel version. This patch fixes it,
'make kernelrelease' will show the same version name with the one
you finally get.

Cc: David Rientjes <rientjes@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: NAmerigo Wang <amwang@redhat.com>
[mmarek: merged with 09155120 and added dependency on
include/config/kernel.release]
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Now that we run scripts/setlocalversion during every build, it makes
sense to move all the localversion logic there. This cleans up the
toplevel Makefile and also makes sure that the script is called only
once in 'make prepare' (previously, it would be called every time due to
a variable expansion in an ifneq statement). No user-visible change is
intended, unless one runs the setlocalversion script directly.
Reported-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: Nico Schottelius <nico-linuxsetlocalversion@schottelius.org>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

In the commit below the version string handling was modified, adding
a '+' where no other version information was supplied:

    commit 85a256d8
    Author: David Rientjes <rientjes@google.com>
    Date:   Wed Jan 13 13:01:05 2010 -0800

From the commit the intent was as below:

     - when CONFIG_LOCALVERSION_AUTO is disabled, a `+' is appended if the
       repository has been revised beyond a tagged commit and LOCALVERSION=
       was not passed to "make".

However if the user supplies an empty LOCALVERSION on the command line
the plus suffix is still added.  This form is useful in the case where
the build environment knows that the version as specified is correct and
complete but does not correspond to a specific tag.

This patch changes the implementation to match the documentation
such that specifying LOCALVERSION= on the build line is sufficient
to suppress any suffix.
Signed-off-by: NAndy Whitcroft <apw@canonical.com>
Acked-by: NDavid Rientjes <rientjes@google.com>
Signed-off-by: NMichal Marek <mmarek@suse.cz>