For loopback purposes, RoCE devices should have a default GID in the
port GID table, even when the interface is down. In order to do so,
we use the IPv6 link local address which would have been genenrated
for the related Ethernet netdevice when it goes up as a default GID.

addrconf_ifid_eui48 is used to gernerate this address, export it.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fully replaced by a more generic and suitable
ib_alloc_mr.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Ported from upstream qib commit
68c02e232b8a ("qib: Support ib_alloc_mr verb")
Tested-by: NJubin John <jubin.john@intel.com>
Reviewed-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Svcrdma was incorrectly allocating fastreg MRs and page lists using
RPCSVC_MAXPAGES, which can exceed the device capabilities.  So limit
the depth to the minimum of RPCSVC_MAXPAGES and xprt->sc_frmr_pg_list_len.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use ib_alloc_mr with specific parameters.
Change the existing callers.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This was added in a thought of uniting all mr allocation
and deallocation routines but the fact is we have a single
deallocation routine already, ib_dereg_mr.

And, move mlx5_ib_destroy_mr specific logic into mlx5_ib_dereg_mr
(includes only signature stuff for now).

And, fixup the only callers (iser/isert) accordingly.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When no matching listening ID is found for a given request, the net_dev
that was used to find the request isn't released.

Fixes: 0b3ca768 ("IB/cma: Use found net_dev for passive connections")
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Now that there are no ib_cm clients using the compare_data feature for
matching IB CM requests' private data, remove the compare_data parameter of
ib_cm_listen and remove the code implementing the feature.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Use ib_cm_insert_listen to create listening IB CM IDs or share existing
ones if needed. When given a request on a specific CM ID, the code now
matches the request to the RDMA CM ID based on the request parameters, so
it no longer needs to rely on the ib_cm's private data matching
capabilities.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When receiving a new connection in cma_req_handler, we actually already
know the net_dev that is used for the connection's creation. Instead of
calling cma_translate_addr to resolve the new connection id's source
address, just use the net_dev that was found.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Pass incoming request parameters through the relevant IPv4/IPv6 routing
tables and make sure the network stack is configured to handle such
requests.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Instead of relying on a the ib_cm module to check an incoming CM request's
private data header, add these checks to the RDMA CM module. This allows a
following patch to to clean up the ib_cm interface and remove the code that
looks into the private headers. It will also allow supporting namespaces in
RDMA CM by making these checks namespace aware later on.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The rdma_cm module will later use the P_Key from the BTH to de-mux
requests.

See discussion at:
  http://www.spinics.net/lists/netdev/msg336067.html

Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Liran Liss <liranl@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Add helper functions to access the IDRs by port-space and port number.

Pass around the port-space enum in cma.c instead of using pointers to
port-space IDRs.
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NYotam Kenneth <yotamke@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Signed-off-by: NGuy Shapiro <guysh@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When receiving a connection request, rdma_cm needs to associate the request
with a network device, in order to disambiguate requests. To do this, it
needs to know the request's destination IP. For this the module needs to
allow getting this information from the private data in the request packet,
instead of relying on the information already being in the listening RDMA
CM ID.

When creating a new incoming connection ID, the code in
cma_save_ip{4,6}_info can no longer rely on the listener's private data to
find the port number, so it reads it from the requested service ID.
Signed-off-by: NGuy Shapiro <guysh@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NYotam Kenneth <yotamke@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Enabling network namespaces for RDMA CM will allow processes on different
namespaces to listen on the same port. In order to leave namespace support
out of the CM layer, this requires that multiple RDMA CM IDs will be able
to share a single CM ID.

This patch adds infrastructure to retrieve an existing listening ib_cm_id,
based on its device and service ID, or create a new one if one does not
already exist. It also adds a reference count for such instances
(cm_id_private.listen_sharecount), and prevents cm_destroy_id from
destroying a CM if it is still shared. See the relevant discussion [1].

[1] Re: [PATCH v3 for-next 05/13] IB/cm: Reference count ib_cm_ids
    http://www.spinics.net/lists/netdev/msg328860.htmlReviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Expose the service ID on an incoming CM or SIDR request to the event
handler. This will allow the RDMA CM module to de-multiplex connection
requests based on the information encoded in the service ID.
Acked-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Implement the get_net_device_by_port_pkey_ip callback that returns network
device to ib_core according to connection parameters. Check the ipoib
device and iterate over all child devices to look for a match.

For each IPoIB device we iterate through all upper devices when searching
for a matching IP, in order to support bonding.
Signed-off-by: NGuy Shapiro <guysh@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NYotam Kenneth <yotamke@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In the case of IPoIB, and maybe in other cases, the network device is
managed by an upper-layer protocol (ULP). In order to expose this
network device to other users of the IB device, let ULPs implement
a callback that returns network device according to connection parameters.

The IB device and port, together with the P_Key and the GID should
be enough to uniquely identify the ULP net device. However, in current
kernels there can be multiple IPoIB interfaces created with the same GID.
Furthermore, such configuration may be desireable to support ipvlan-like
configurations for RDMA CM with IPoIB.  To resolve the device in these
cases the code will also take the IP address as an additional input.
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NYotam Kenneth <yotamke@mellanox.com>
Signed-off-by: NShachar Raindel <raindel@mellanox.com>
Signed-off-by: NGuy Shapiro <guysh@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

An ib_client callback that is called with the lists_rwsem locked only for
read is protected from changes to the IB client lists, but not from
ib_unregister_device() freeing its client data. This is because
ib_unregister_device() will remove the device from the device list with
lists_rwsem locked for write, but perform the rest of the cleanup,
including the call to remove() without that lock.

Mark client data that is undergoing de-registration with a new going_down
flag in the client data context. Lock the client data list with lists_rwsem
for write in addition to using the spinlock, so that functions calling the
callback would be able to lock only lists_rwsem for read and let callbacks
sleep.

Since ib_unregister_client() now marks the client data context, no need for
remove() to search the context again, so pass the client data directly to
remove() callbacks.
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Currently the RDMA subsystem's device list and client list are protected by
a single mutex. This prevents adding user-facing APIs that iterate these
lists, since using them may cause a deadlock. The patch attempts to solve
this problem by adding a read-write semaphore to protect the lists. Readers
now don't need the mutex, and are safe just by read-locking the semaphore.

The ib_register_device, ib_register_client, ib_unregister_device, and
ib_unregister_client functions are modified to lock the semaphore for write
during their respective list modification. Also, in order to make sure
client callbacks are called only between add() and remove() calls, the code
is changed to only add items to the lists after the add() calls and remove
from the lists before the remove() calls.

This patch attempts to solve a similar need [1] that was seen in the RoCE
v2 patch series.

[1] http://www.spinics.net/lists/linux-rdma/msg24733.htmlReviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Cc: Matan Barak <matanb@mellanox.com>
Signed-off-by: NHaggai Eran <haggaie@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This functionality already exists via the max_sge_rd
device capability.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Applications must not assume that max_sge and max_sge_rd are the same,
Hence expose max_sge_rd correctly as well.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Acked-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Applications must not assume that max_sge and max_sge_rd are the same,
Hence expose max_sge_rd correctly as well.
Reported-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Running checkpatch.pl on mad.c produces several
"ERROR: code indent should use tabs where possible" messages.
This patch fixes these.
Signed-off-by: NJeff Becker <Jeffrey.C.Becker@nasa.gov>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Signed-off-by: NAndrew Friedley <andrew.friedley@intel.com>
Signed-off-by: NArthur Kepner <arthur.kepner@intel.com>
Signed-off-by: NBrendan Cunningham <brendan.cunningham@intel.com>
Signed-off-by: NBrian Welty <brian.welty@intel.com>
Signed-off-by: NCaz Yokoyama <caz.yokoyama@intel.com>
Signed-off-by: NDean Luick <dean.luick@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NEaswar Hariharan <easwar.hariharan@intel.com>
Signed-off-by: NHarish Chegondi <harish.chegondi@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NJim Snow <jim.m.snow@intel.com>
Signed-off-by: NJohn Gregor <john.a.gregor@intel.com>
Signed-off-by: NJubin John <jubin.john@intel.com>
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Signed-off-by: NKevin Pine <kevin.pine@intel.com>
Signed-off-by: NKyle Liddell <kyle.liddell@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NMitko Haralanov <mitko.haralanov@intel.com>
Signed-off-by: NRavi Krishnaswamy <ravi.krishnaswamy@intel.com>
Signed-off-by: NSadanand Warrier <sadanand.warrier@intel.com>
Signed-off-by: NSanath Kumar <sanath.s.kumar@intel.com>
Signed-off-by: NSudeep Dutt <sudeep.dutt@intel.com>
Signed-off-by: NVlad Danushevsky <vladimir.danusevsky@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This patch adds the value of the CNP opcode to the existing list of enumerated
opcodes in ib_pack.h

Add common OPA header definitions for driver
build:
- opa_port_info.h
- opa_smi.h
- hfi1_user.h

Additionally, ib_mad.h, has additional definitions
that are common to ib_drivers including:
- trap support
- cca support

The qib driver has the duplication removed in favor
those in ib_mad.h
Reviewed-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Reviewed-by: NJohn, Jubin <jubin.john@intel.com>
Signed-off-by: NIra Weiny <ira.weiny@intel.com>
Signed-off-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>