- 09 11月, 2017 7 次提交
-
-
由 Chris Wilson 提交于
The shared fence array is not autopruning and may continue to grow as an object is shared between new timelines. Take the opportunity when we think the object is idle (we have to confirm that any external fence is also signaled) to decouple all the fences. We apply a similar trick after waiting on an object, see commit e54ca977 ("drm/i915: Remove completed fences after a wait") v2: No longer need to handle the batch pool as a special case. v3: Need to trylock from within i915_vma_retire as this may be called form the shrinker - and we may later try to allocate underneath the reservation lock, so a deadlock is possible. References: https://bugs.freedesktop.org/show_bug.cgi?id=102936 Fixes: d07f0e59 ("drm/i915: Move GEM activity tracking into a common struct reservation_object") Fixes: 80b204bc ("drm/i915: Enable multiple timelines") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171107220656.5020-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 1ab22356) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Chris Wilson 提交于
The handling of contexts are peculiar. Instead of tieing their vma to activity, we pin the context. This means that we cannot simply unbind the context object itself at will (which would normally cause us to wait for the vma to be idle), but must manually idle the GPU and retire requests first. A consequence of this peculiarity is when doing a last desperate attempt to recover memory. If the memory is tied up inside active context objects, we will fail to recover any memory simply by trying to unbind the objects without first doing a wait-for-idle. A side-effect of removing the call to shrinker_lock_uninterruptible() from i915_gem_shrinker_oom() was that we removed an unlocked wait-for-idle, and so lost the "natural" shrinkage of context objects. By replacing that with a locked wait from inside i915_gem_shrink(), we not only replace it with the ability to recover all context objects, but do so for all i915_gem_shrink_all() callers. v2: Switching requires request allocation, which is not permitted from inside the shrinker as it only uses ordinary allocations. References: https://bugs.freedesktop.org/show_bug.cgi?id=102936 Fixes: f2123818 ("drm/i915: Move dev_priv->mm.[un]bound_list to its own lock") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171108094400.1386-1-chris@chris-wilson.co.ukReviewed-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> (cherry picked from commit 2f6a3783) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Chris Wilson 提交于
An oversight in commit 87701b4b ("drm/i915: Only free the oldest stale object before a fresh allocation") was that not only do we have to serialise concurrent users of llist_del_first(), but we also have to lock llist_del_first() vs llist_del_all(). From llist.h, * This can be summarized as follows: * * | add | del_first | del_all * add | - | - | - * del_first | | L | L * del_all | | | - * * Where, a particular row's operation can happen concurrently with a column's * operation, with "-" being no lock needed, while "L" being lock is needed. This should hopefully explain: <4>[ 89.287106] general protection fault: 0000 [#1] PREEMPT SMP <4>[ 89.287126] Modules linked in: snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic x86_pkg_temp_thermal intel_powerclamp coretemp i915 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core r8169 mii mei_me mei snd_pcm prime_numbers i2c_hid pinctrl_geminilake pinctrl_intel <4>[ 89.287226] CPU: 2 PID: 23 Comm: ksoftirqd/2 Tainted: G U 4.14.0-rc8-CI-CI_DRM_3315+ #1 <4>[ 89.287247] Hardware name: Intel Corp. Geminilake/GLK RVP2 LP4SD (07), BIOS GELKRVPA.X64.0062.B30.1708222146 08/22/2017 <4>[ 89.287270] task: ffff88017ab34ec0 task.stack: ffffc90000128000 <4>[ 89.287290] RIP: 0010:llist_add_batch+0x4/0x20 <4>[ 89.287301] RSP: 0018:ffffc9000012bdb8 EFLAGS: 00010296 <4>[ 89.287314] RAX: ffffffff811017ad RBX: 6e468801a1560000 RCX: ef3e53fceecdeb81 <4>[ 89.287330] RDX: 6e468801a1566130 RSI: ffff880103d73d98 RDI: ffff880103d73d98 <4>[ 89.287346] RBP: ffffc9000012bdb8 R08: ffff88017ab35780 R09: 0000000000000000 <4>[ 89.287361] R10: ffffc9000012bd68 R11: 00000000abb18c3d R12: ffffffffa01369e0 <4>[ 89.287377] R13: ffff88017fd1b8f8 R14: ffff88017ab34ec0 R15: 000000000000000a <4>[ 89.287393] FS: 0000000000000000(0000) GS:ffff88017fd00000(0000) knlGS:0000000000000000 <4>[ 89.287411] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 <4>[ 89.287424] CR2: 00007ff0c0755018 CR3: 000000016df9b000 CR4: 00000000003406e0 <4>[ 89.287440] Call Trace: <4>[ 89.287511] __i915_gem_free_object_rcu+0x20/0x40 [i915] <4>[ 89.287527] rcu_process_callbacks+0x27a/0x730 <4>[ 89.287544] __do_softirq+0xc0/0x4ae <4>[ 89.287559] ? smpboot_thread_fn+0x2d/0x280 <4>[ 89.287571] run_ksoftirqd+0x1f/0x70 <4>[ 89.287582] smpboot_thread_fn+0x18a/0x280 <4>[ 89.287595] kthread+0x114/0x150 <4>[ 89.287605] ? sort_range+0x30/0x30 <4>[ 89.287615] ? kthread_create_on_node+0x40/0x40 <4>[ 89.287628] ret_from_fork+0x27/0x40 <4>[ 89.287641] Code: 0d 48 83 ea 01 4c 89 c1 48 83 fa ff 74 12 48 23 0c d7 74 ed 48 c1 e2 06 48 0f bd c9 48 8d 04 0a 5d c3 90 90 90 90 90 55 48 89 e5 <48> 8b 0a 48 89 0e 48 89 c8 f0 48 0f b1 3a 48 39 c1 75 ed 48 85 <1>[ 89.287774] RIP: llist_add_batch+0x4/0x20 RSP: ffffc9000012bdb8 <4>[ 89.287826] ---[ end trace e775d15174d8ae02 ]--- (Lockless lists are only easy (and lockless) when only using llist_add/llist_del_all!) Fixes: 87701b4b ("drm/i915: Only free the oldest stale object before a fresh allocation") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171106111508.11941-1-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> (cherry picked from commit f991c492) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Maarten Lankhorst 提交于
The watermarks it should calculate against are the old optimal watermarks. The currently active crtc watermarks are pure fiction, and are invalid in case of a nonblocking modeset, page flip enabling/disabling planes or any other reason. When the crtc is disabled or during a modeset the intermediate watermarks don't need to be programmed separately, and could be directly assigned to the optimal watermarks. Changes since v1: - Use intel_atomic_get_old_crtc_state. (ville) Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: NMatt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171019151341.4579-2-maarten.lankhorst@linux.intel.com [mlankhorst: Add cc stable and bugzilla link, since previous patch doesn't fix issue by itself] Cc: stable@vger.kernel.org #v4.8+ Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102373 (cherry picked from commit b6b178a7) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Joonas Lahtinen 提交于
When running under virtualization (vGPU active), we must disable the lazy PPGTT page table initialization optimization introduced by commit 14826673 ("drm/i915: Only initialize partially filled pagetables"). We must do this because GVT-g makes unduly assumptions about guest behaviour, which this optimization breaks. This results in following looking errors in the host: ERROR gvt: guest page write error -22, gfn 0x7ada8, pa 0x7ada89a8, var 0x6, len 1 The real fix is to not to depend on i915 driver behaviour, but instead either rely on only the contracts that i915 has with the hardware, or add some paravirtualization. While the real fix is en route, it won't be finished in time for 4.15, so the best option is to disable the optimization for now when vGPU is active to avoid breaking 4.15 guests in existing VM environments. Fixes: 14826673 ("drm/i915: Only initialize partially filled pagetables") Suggested-by: NXiaolin Zhang <xiaolin.zhang@intel.com> Signed-off-by: NXiaolin Zhang <xiaolin.zhang@intel.com> [Joonas: Rewrote the commit message and added tags.] Signed-off-by: NJoonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhi Wang <zhi.a.wang@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Matthew Auld <matthew.auld@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by: NChris Wilson <chris@chris-wilson.co.uk> Acked-by: NZhenyu Wang <zhenyuw@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171023153209.10527-1-joonas.lahtinen@linux.intel.com (cherry picked from commit 22a8a4fc) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Chris Wilson 提交于
Originally we set the priority to max upon inserting the request into the execlists queue (and removing it from the scheduler lists). We could then use the prio==INT_MAX as a shortcut within execlists_schedule() to detect the end of the dependency chain. Since commit 1f181225 ("drm/i915/execlists: Keep request->priority for its lifetime") this is no longer true as we use the request completion as an indicator the schedule dependency chain is complete instead. (This allows us to then reschedule requests even when its context is in flight.) However, this makes the GEM_BUG_ON() inside execlists_schedule() racy as we may change the rq->prio at the same time. As the assertion is useful, let's keep the assertion and remove the micro-optimisation. Fixes: 1f181225 ("drm/i915/execlists: Keep request->priority for its lifetime") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171024115501.21033-1-chris@chris-wilson.co.ukReviewed-by: NMichał Winiarski <michal.winiarski@intel.com> (cherry picked from commit 64b80085) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Chris Wilson 提交于
Back in commit a4b2b015 ("drm/i915: Don't mark an execlists context-switch when idle") we noticed the presence of late context-switch interrupts. We were able to filter those out by looking at whether the ELSP remained active, but in commit beecec90 ("drm/i915/execlists: Preemption!") that became problematic as we now anticipate receiving a context-switch event for preemption while ELSP may be empty. To restore the spurious interrupt suppression, add a counter for the expected number of pending context-switches and skip if we do not need to handle this interrupt to make forward progress. v2: Don't forget to switch on for preempt. v3: Reduce the counter to a on/off boolean tracker. Declare the HW as active when we first submit, and idle after the final completion event (with which we confirm the HW says it is idle), and track each source of activity separately. With a finite number of sources, it should aide us in debugging which gets stuck. Fixes: beecec90 ("drm/i915/execlists: Preemption!") Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com> Cc: Mika Kuoppala <mika.kuoppala@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171023213237.26536-3-chris@chris-wilson.co.ukReviewed-by: NMika Kuoppala <mika.kuoppala@linux.intel.com> (cherry picked from commit 4a118ecb) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
- 04 11月, 2017 3 次提交
-
-
由 Michel Dänzer 提交于
Memory allocation failure should generally be handled gracefully by callers. In particular, with transparent hugepage support, attempts to allocate huge pages can fail under memory pressure, but the callers fall back to allocating individual pages instead. In that case, there would be spurious [TTM] Unable to get page %u error messages in dmesg. Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Michel Dänzer 提交于
Fixes a use-after-free due to a race condition in ttm_bo_cleanup_refs_and_unlock, which allows one task to reserve a BO and destroy its ttm_resv while another task is waiting for it to signal in reservation_object_wait_timeout_rcu. v2: * Always initialize bo->ttm_resv in ttm_bo_init_reserved (Christian König) Fixes: 0d2bd2ae "drm/ttm: fix memory leak while individualizing BOs" Reviewed-by: Chunming Zhou <david1.zhou@amd.com> # v1 Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Akshu Agrawal 提交于
Enabling of ACP in hw_init does away with requirement of order of probe on designware_i2s and acp dma driver. designware_i2s reads i2s registers and this use to fail if acp dma driver was not probed prior to it. BUG=:b:62103837 TEST=modprobe snd-soc-acp-pcm modprobe snd-soc-acp-rt5645-mach aplay -l **** List of PLAYBACK Hardware Devices **** card 0: acprt5650 [acprt5650], device 0: RT5645_AIF1 rt5645-aif1-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 v2: use proper device in dev_err to fix warnings (Alex) Signed-off-by: NAkshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://chromium-review.googlesource.com/670207Reviewed-by: NJason Clinton <jclinton@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/676628Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 03 11月, 2017 6 次提交
-
-
由 Arnd Bergmann 提交于
Accessing the THIS_MODULE directly is only possible when modules are enabled, otherwise we get a build failure: drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c: In function 'amdgpu_virt_init_data_exchange': drivers/gpu/drm/amd/amdgpu/amdgpu_virt.c:331:20: error: dereferencing pointer to incomplete type 'struct module' Further, THIS_MODULE is NULL when the driver is built-in, so the code would likely cause a NULL pointer dereference. This adds an #ifdef check to avoid the compile-time error, plus a NULL pointer check before dereferencing THIS_MODULE. It might be better to find a way to avoid using the module version altogether. Fixes: 2dc8f81e ("drm/amdgpu: SR-IOV data exchange between PF&VF") Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NHarry Wentland <harry.wentland@amd.com> Reviewed-By: NXiangliang Yu <Xiangliang.Yu@amd.com>
-
由 Gustavo A. R. Silva 提交于
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 1260018 Addresses-Coverity-ID: 1260019 Addresses-Coverity-ID: 1260022 Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Gustavo A. R. Silva 提交于
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. Addresses-Coverity-ID: 143119 Addresses-Coverity-ID: 143120 Addresses-Coverity-ID: 143121 Addresses-Coverity-ID: 143122 Addresses-Coverity-ID: 143123 Addresses-Coverity-ID: 143124 Signed-off-by: NGustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Colin Ian King 提交于
Don't populate arrays hwsq_signature and edid_sig on the stack but instead make them static. Makes the object code smaller by over 190 bytes: Before: text data bss dec hex filename 35676 3312 64 39052 988c nouveau_bios.o After: text data bss dec hex filename 35319 3472 64 38855 97c7 nouveau_bios.o (gcc version 7.2.0 x86_64) Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Rounding value is guaranteed to be power-of-two, so this is better anyway. Fixes build on 32-bit. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 02 11月, 2017 24 次提交
-
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Enables the use of Pascal's 2MiB pages for larger buffers. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
VMAs are about to not take references on the VMM they belong to, which means more care is required when handling delayed unmapping. Queuing it on the client workqueue ensures all pending VMA unmaps will have completed before the VMM is destroyed. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
This is already handled in the top-level gem_new() ioctl in another manner, but this will be removed in a future commit. Ideally we'd not need to check up-front at all, and let the VMM code handle error checking, but there are paths in the current BO management code where this isn't possible due to map() not always being called during BO creation, and map() calls not being allowed to fail during buffer migration. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-