This reverts commit 757055ae.

The commit caused that ttynull was used as the default console
on several systems[1][2][3]. As a result, the console was
blank even when a better alternative existed.

It happened when there was no console configured
on the command line and ttynull_init() was the first initcall
calling register_console().

Or it happened when /dev/ did not exist when console_on_rootfs()
was called. It was not able to open /dev/console even though
a console driver was registered. It tried to add ttynull console
but it obviously did not help. But ttynull became the preferred
console and was used by /dev/console when it was available later.

The commit tried to fix a historical problem that have been there
for ages. The primary motivation was the commit 3cffa06a
("printk/console: Allow to disable console output by using console=""
 or console=null"). It provided a clean solution for a workaround
 that was widely used and worked only by chance.

This revert causes that the console="" or console=null command line
options will again work only by chance. These options will cause that
a particular console will be preferred and the default (tty) ones
will not get enabled. There will be no console registered at
all. As a result there won't be stdin, stdout, and stderr for
the init process. But it worked exactly this way even before.

The proper solution has to fulfill many conditions:

  + Register ttynull only when explicitly required or as
    the ultimate fallback.

  + ttynull should get associated with /dev/console but it must
    not become preferred console when used as a fallback.
    Especially, it must still be possible to replace it
    by a better console later.

Such a change requires clean up of the register_console() code.
Otherwise, it would be even harder to follow. Especially, the use
of has_preferred_console and CON_CONSDEV flag is tricky. The clean
up is risky. The ordering of consoles is not well defined. And
any changes tend to break existing user settings.

Do the revert at the least risky solution for now.

[1] https://lore.kernel.org/linux-kselftest/20201221144302.GR4077@smile.fi.intel.com/
[2] https://lore.kernel.org/lkml/d2a3b3c0-e548-7dd1-730f-59bc5c04e191@synopsys.com/
[3] https://patchwork.ozlabs.org/project/linux-um/patch/20210105120128.10854-1-thomas@m3y3r.de/Reported-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: NVineet Gupta <vgupta@synopsys.com>
Reported-by: NThomas Meyer <thomas@m3y3r.de>
Signed-off-by: NPetr Mladek <pmladek@suse.com>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Expose firmware indication that it supports setting eswitch uplink state
to follow (follow the physical link). Condition setting the eswitch
uplink admin-state with this capability bit. Older FW may not support
the uplink state setting.

Fixes: 7d0314b1 ("net/mlx5e: Modify uplink state on interface up/down")
Signed-off-by: NAya Levin <ayal@nvidia.com>
Reviewed-by: NMoshe Shemesh <moshe@nvidia.com>
Signed-off-by: NSaeed Mahameed <saeedm@nvidia.com>

It adds a stub acpi_create_platform_device() for !CONFIG_ACPI build, so
that caller doesn't have to deal with !CONFIG_ACPI build issue.
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NShawn Guo <shawn.guo@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The aux-domain attach/detach are not tracked, some data structures might
be used after free. This causes general protection faults when multiple
subdevices are created and assigned to a same guest machine:

  | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI
  | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0
  | [...]
  | Call Trace:
  |  iommu_aux_detach_device+0x24/0x70
  |  vfio_mdev_detach_domain+0x3b/0x60
  |  ? vfio_mdev_set_domain+0x50/0x50
  |  iommu_group_for_each_dev+0x4f/0x80
  |  vfio_iommu_detach_group.isra.0+0x22/0x30
  |  vfio_iommu_type1_detach_group.cold+0x71/0x211
  |  ? find_exported_symbol_in_section+0x4a/0xd0
  |  ? each_symbol_section+0x28/0x50
  |  __vfio_group_unset_container+0x4d/0x150
  |  vfio_group_try_dissolve_container+0x25/0x30
  |  vfio_group_put_external_user+0x13/0x20
  |  kvm_vfio_group_put_external_user+0x27/0x40 [kvm]
  |  kvm_vfio_destroy+0x45/0xb0 [kvm]
  |  kvm_put_kvm+0x1bb/0x2e0 [kvm]
  |  kvm_vm_release+0x22/0x30 [kvm]
  |  __fput+0xcc/0x260
  |  ____fput+0xe/0x10
  |  task_work_run+0x8f/0xb0
  |  do_exit+0x358/0xaf0
  |  ? wake_up_state+0x10/0x20
  |  ? signal_wake_up_state+0x1a/0x30
  |  do_group_exit+0x47/0xb0
  |  __x64_sys_exit_group+0x18/0x20
  |  do_syscall_64+0x57/0x1d0
  |  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix the crash by tracking the subdevices when attaching and detaching
aux-domains.

Fixes: 67b8e02b ("iommu/vt-d: Aux-domain specific domain attach/detach")
Co-developed-by: NXin Zeng <xin.zeng@intel.com>
Signed-off-by: NXin Zeng <xin.zeng@intel.com>
Signed-off-by: NLiu Yi L <yi.l.liu@intel.com>
Acked-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.comSigned-off-by: NWill Deacon <will@kernel.org>

'struct intel_svm' is shared by all devices bound to a give process,
but records only a single pointer to a 'struct intel_iommu'. Consequently,
cache invalidations may only be applied to a single DMAR unit, and are
erroneously skipped for the other devices.

In preparation for fixing this, rework the structures so that the iommu
pointer resides in 'struct intel_svm_dev', allowing 'struct intel_svm'
to track them in its device list.

Fixes: 1c4f88b7 ("iommu/vt-d: Shared virtual address in scalable mode")
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Raj Ashok <ashok.raj@intel.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Reported-by: NGuo Kaijie <Kaijie.Guo@intel.com>
Reported-by: NXin Zeng <xin.zeng@intel.com>
Signed-off-by: NGuo Kaijie <Kaijie.Guo@intel.com>
Signed-off-by: NXin Zeng <xin.zeng@intel.com>
Signed-off-by: NLiu Yi L <yi.l.liu@intel.com>
Tested-by: NGuo Kaijie <Kaijie.Guo@intel.com>
Cc: stable@vger.kernel.org # v5.0+
Acked-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1609949037-25291-2-git-send-email-yi.l.liu@intel.comSigned-off-by: NWill Deacon <will@kernel.org>

Done opencode in_serving_softirq() checks in in_serving_softirq() to avoid
cluttering the code, hide them in kcov helpers instead.

Fixes: aee9ddb1 ("kcov, usb: only collect coverage from __usb_hcd_giveback_urb in softirq")
Signed-off-by: NAndrey Konovalov <andreyknvl@google.com>
Link: https://lore.kernel.org/r/aeb430c5bb90b0ccdf1ec302c70831c1a47b9c45.1609876340.git.andreyknvl@google.comSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Silly GCC doesn't always inline these trivial functions.

Fixes the following warning:

  arch/x86/kernel/sys_ia32.o: warning: objtool: cp_stat64()+0xd8: call to new_encode_dev() with UACCESS enabled

Link: https://lkml.kernel.org/r/984353b44a4484d86ba9f73884b7306232e25e30.1608737428.git.jpoimboe@redhat.comSigned-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Reported-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>	[build-tested]
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add these macros, since we can use them in drivers.

Link: https://lkml.kernel.org/r/20201229072819.11183-1-sjhuang@iluvatar.aiSigned-off-by: NHuang Shijie <sjhuang@iluvatar.ai>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

VMware observed a performance regression during memmap init on their
platform, and bisected to commit 73a6e474 ("mm: memmap_init:
iterate over memblock regions rather that check each PFN") causing it.

Before the commit:

  [0.033176] Normal zone: 1445888 pages used for memmap
  [0.033176] Normal zone: 89391104 pages, LIFO batch:63
  [0.035851] ACPI: PM-Timer IO Port: 0x448

With commit

  [0.026874] Normal zone: 1445888 pages used for memmap
  [0.026875] Normal zone: 89391104 pages, LIFO batch:63
  [2.028450] ACPI: PM-Timer IO Port: 0x448

The root cause is the current memmap defer init doesn't work as expected.

Before, memmap_init_zone() was used to do memmap init of one whole zone,
to initialize all low zones of one numa node, but defer memmap init of
the last zone in that numa node.  However, since commit 73a6e474,
function memmap_init() is adapted to iterater over memblock regions
inside one zone, then call memmap_init_zone() to do memmap init for each
region.

E.g, on VMware's system, the memory layout is as below, there are two
memory regions in node 2.  The current code will mistakenly initialize the
whole 1st region [mem 0xab00000000-0xfcffffffff], then do memmap defer to
iniatialize only one memmory section on the 2nd region [mem
0x10000000000-0x1033fffffff].  In fact, we only expect to see that there's
only one memory section's memmap initialized.  That's why more time is
costed at the time.

[    0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x0009ffff]
[    0.008842] ACPI: SRAT: Node 0 PXM 0 [mem 0x00100000-0xbfffffff]
[    0.008843] ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x55ffffffff]
[    0.008844] ACPI: SRAT: Node 1 PXM 1 [mem 0x5600000000-0xaaffffffff]
[    0.008844] ACPI: SRAT: Node 2 PXM 2 [mem 0xab00000000-0xfcffffffff]
[    0.008845] ACPI: SRAT: Node 2 PXM 2 [mem 0x10000000000-0x1033fffffff]

Now, let's add a parameter 'zone_end_pfn' to memmap_init_zone() to pass
down the real zone end pfn so that defer_init() can use it to judge
whether defer need be taken in zone wide.

Link: https://lkml.kernel.org/r/20201223080811.16211-1-bhe@redhat.com
Link: https://lkml.kernel.org/r/20201223080811.16211-2-bhe@redhat.com
Fixes: commit 73a6e474 ("mm: memmap_init: iterate over memblock regions rather that check each PFN")
Signed-off-by: NBaoquan He <bhe@redhat.com>
Reported-by: NRahul Gopakumar <gopakumarr@vmware.com>
Reviewed-by: NMike Rapoport <rppt@linux.ibm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Otherwise it causes a gcc warning:

  mm/filemap.c:830:14: warning: no previous prototype for `__add_to_page_cache_locked' [-Wmissing-prototypes]

A previous attempt to make this function static led to compilation
errors when CONFIG_DEBUG_INFO_BTF is enabled because
__add_to_page_cache_locked() is referred to by BPF code.

Adding a prototype will silence the warning.

Link: https://lkml.kernel.org/r/1608693702-4665-1-git-send-email-jrdr.linux@gmail.comSigned-off-by: NSouptick Joarder <jrdr.linux@gmail.com>
Cc: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This reverts commit 14dc3983.

Macro Elver had sent a fix proper fix earlier, and also pointed out
corner cases:
 "I guess what you propose is simpler, but might still have corner cases
  where we still get warnings. In particular, if some file (for whatever
  reason) does not include build_bug.h and uses a raw _Static_assert(),
  then we still get warnings. E.g. I see 1 user of raw _Static_assert()
  (drivers/gpu/drm/amd/amdgpu/amdgv_sriovmsg.h )."

I believe the raw use of _Static_assert() should be allowed, so this
should be fixed in genksyms.

Even after commit 14dc3983 ("kbuild: avoid static_assert for
genksyms"), I confirmed the following test code emits the warning.

  ---------------->8----------------
  #include <linux/export.h>

  _Static_assert((1 ?: 0), "");

  void foo(void) { }
  EXPORT_SYMBOL(foo);
  ---------------->8----------------

  WARNING: modpost: EXPORT symbol "foo" [vmlinux] version generation failed, symbol will not be versioned.

Now that commit 869b91992bce ("genksyms: Ignore module scoped
_Static_assert()") fixed this issue properly, the workaround should
be reverted.

Link: https://lkml.org/lkml/2020/12/10/845
Link: https://lkml.kernel.org/r/20201219183911.181442-1-masahiroy@kernel.orgSigned-off-by: NMasahiro Yamada <masahiroy@kernel.org>
Cc: Marco Elver <elver@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Avoid -Wunused-const-variable warnings for "make W=1".
Reported-by: NJeff Layton <jlayton@kernel.org>
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

Commit

  121b32a5 ("x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments")

converted native x86-32 which take 64-bit arguments to use the
compat handlers to allow conversion to passing args via pt_regs.
sys_fanotify_mark() was however missed, as it has a general compat
handler. Add a config option that will use the syscall wrapper that
takes the split args for native 32-bit.

 [ bp: Fix typo in Kconfig help text. ]

Fixes: 121b32a5 ("x86/entry/32: Use IA32-specific wrappers for syscalls taking 64-bit arguments")
Reported-by: NPaweł Jasiak <pawel@jasiak.xyz>
Signed-off-by: NBrian Gerst <brgerst@gmail.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Acked-by: NJan Kara <jack@suse.cz>
Acked-by: NAndy Lutomirski <luto@kernel.org>
Link: https://lkml.kernel.org/r/20201130223059.101286-1-brgerst@gmail.com

The reason cache merging is disabled with KASAN is because KASAN puts its
metadata right after the allocated object. When the merged caches have
slightly different sizes, the metadata ends up in different places, which
KASAN doesn't support.

It might be possible to adjust the metadata allocation algorithm and make
it friendly to the cache merging code. Instead this change takes a simpler
approach and allows merging caches when no metadata is present. Which is
the case for hardware tag-based KASAN with kasan.mode=prod.

Link: https://lkml.kernel.org/r/37497e940bfd4b32c0a93a702a9ae4cf061d5392.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Ia114847dfb2244f297d2cb82d592bf6a07455dbaCo-developed-by: NVincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: NVincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Reviewed-by: NMarco Elver <elver@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rename kasan_poison_kfree() to kasan_slab_free_mempool() as it better
reflects what this annotation does. Also add a comment that explains the
PageSlab() check.

No functional changes.

Link: https://lkml.kernel.org/r/141675fb493555e984c5dca555e9d9f768c7bbaa.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/I5026f87364e556b506ef1baee725144bb04b8810Signed-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NMarco Elver <elver@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Declare the kasan_enabled static key in include/linux/kasan.h and in
include/linux/mm.h and check it in all kasan annotations. This allows to
avoid any slowdown caused by function calls when kasan_enabled is
disabled.

Link: https://lkml.kernel.org/r/9f90e3c0aa840dbb4833367c2335193299f69023.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/I2589451d3c96c97abbcbf714baabe6161c6f153eCo-developed-by: NVincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: NVincenzo Frascino <Vincenzo.Frascino@arm.com>
Signed-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NMarco Elver <elver@google.com>
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There's the external annotation kasan_unpoison_slab() that is currently
defined as static inline and uses kasan_unpoison_range(). Open-code this
function in mempool.c. Otherwise with an upcoming change this function
will result in an unnecessary function call.

Link: https://lkml.kernel.org/r/131a6694a978a9a8b150187e539eecc8bcbf759b.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/Ia7c8b659f79209935cbaab3913bf7f082cc43a0eSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NMarco Elver <elver@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Using kasan_reset_tag() currently results in a function call. As it's
called quite often from the allocator code, this leads to a noticeable
slowdown. Move it to include/linux/kasan.h and turn it into a static
inline function. Also remove the now unneeded reset_tag() internal KASAN
macro and use kasan_reset_tag() instead.

Link: https://lkml.kernel.org/r/6940383a3a9dfb416134d338d8fac97a9ebb8686.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/I4d2061acfe91d480a75df00b07c22d8494ef14b5Signed-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NMarco Elver <elver@google.com>
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There's a config option CONFIG_KASAN_STACK that has to be enabled for
KASAN to use stack instrumentation and perform validity checks for
stack variables.

There's no need to unpoison stack when CONFIG_KASAN_STACK is not enabled.
Only call kasan_unpoison_task_stack[_below]() when CONFIG_KASAN_STACK is
enabled.

Note, that CONFIG_KASAN_STACK is an option that is currently always
defined when CONFIG_KASAN is enabled, and therefore has to be tested
with #if instead of #ifdef.

Link: https://lkml.kernel.org/r/d09dd3f8abb388da397fd11598c5edeaa83fe559.1606162397.git.andreyknvl@google.com
Link: https://linux-review.googlesource.com/id/If8a891e9fe01ea543e00b576852685afec0887e3Signed-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NMarco Elver <elver@google.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NDmitry Vyukov <dvyukov@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Provide implementation of KASAN functions required for the hardware
tag-based mode.  Those include core functions for memory and pointer
tagging (tags_hw.c) and bug reporting (report_tags_hw.c).  Also adapt
common KASAN code to support the new mode.

Link: https://lkml.kernel.org/r/cfd0fbede579a6b66755c98c88c108e54f9c56bf.1606161801.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NAlexander Potapenko <glider@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some #ifdef CONFIG_KASAN checks are only relevant for software KASAN modes
(either related to shadow memory or compiler instrumentation).  Expand
those into CONFIG_KASAN_GENERIC || CONFIG_KASAN_SW_TAGS.

Link: https://lkml.kernel.org/r/e6971e432dbd72bb897ff14134ebb7e169bdcf0c.1606161801.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NAlexander Potapenko <glider@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Rename kasan_init_tags() to kasan_init_sw_tags() as the upcoming hardware
tag-based KASAN mode will have its own initialization routine.  Also
similarly to kasan_init() mark kasan_init_tags() as __init.

Link: https://lkml.kernel.org/r/71e52af72a09f4b50c8042f16101c60e50649fbb.1606161801.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NAlexander Potapenko <glider@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.

Hardware tag-based KASAN won't use kasan_depth.  Only define and use it
when one of the software KASAN modes are enabled.

No functional changes for software modes.

Link: https://lkml.kernel.org/r/e16f15aeda90bc7fb4dfc2e243a14b74cc5c8219.1606161801.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: NCatalin Marinas <catalin.marinas@arm.com>
Reviewed-by: NAlexander Potapenko <glider@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Marco Elver <elver@google.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.

The new mode won't be using shadow memory.  Rename external annotation
kasan_unpoison_shadow() to kasan_unpoison_range(), and introduce internal
functions (un)poison_range() (without kasan_ prefix).
Co-developed-by: NMarco Elver <elver@google.com>
Link: https://lkml.kernel.org/r/fccdcaa13dc6b2211bf363d6c6d499279a54fe3a.1606161801.git.andreyknvl@google.comSigned-off-by: NMarco Elver <elver@google.com>
Signed-off-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: NAlexander Potapenko <glider@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.

Group shadow-related KASAN function declarations and only define them for
the two existing software modes.

No functional changes for software modes.

  Link: https://lkml.kernel.org/r/35126.1606402815@turing-police
  Link: https://lore.kernel.org/linux-arm-kernel/24105.1606397102@turing-police/

Link: https://lkml.kernel.org/r/e88d94eff94db883a65dca52e1736d80d28dd9bc.1606161801.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: NValdis Kletnieks <valdis.kletnieks@vt.edu>
Reviewed-by: NMarco Elver <elver@google.com>
Reviewed-by: NAlexander Potapenko <glider@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
[valdis.kletnieks@vt.edu: fix build issue with asmlinkage]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a preparatory commit for the upcoming addition of a new hardware
tag-based (MTE-based) KASAN mode.

Group all vmalloc-related function declarations in include/linux/kasan.h,
and their implementations in mm/kasan/common.c.

No functional changes.

Link: https://lkml.kernel.org/r/80a6fdd29b039962843bd6cf22ce2643a7c8904e.1606161801.git.andreyknvl@google.comSigned-off-by: NAndrey Konovalov <andreyknvl@google.com>
Signed-off-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Reviewed-by: NMarco Elver <elver@google.com>
Reviewed-by: NAlexander Potapenko <glider@google.com>
Tested-by: NVincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Branislav Rankov <Branislav.Rankov@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Kevin Brodsky <kevin.brodsky@arm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Split off from prev patch in the series that implements the syscall.

Link: https://lkml.kernel.org/r/20201121144401.3727659-4-willemdebruijn.kernel@gmail.comSigned-off-by: NWillem de Bruijn <willemb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

mem_cgroup_page_lruvec() in memcontrol.c and mem_cgroup_lruvec() in
memcontrol.h is very similar except for the param(page and memcg) which
also can be convert to each other.

So rewrite mem_cgroup_page_lruvec() with mem_cgroup_lruvec().

[alex.shi@linux.alibaba.com: add missed warning in mem_cgroup_lruvec]
  Link: https://lkml.kernel.org/r/94f17bb7-ec61-5b72-3555-fabeb5a4d73b@linux.alibaba.com
[lstoakes@gmail.com: warn on missing memcg on mem_cgroup_page_lruvec()]
  Link: https://lkml.kernel.org/r/20201125112202.387009-1-lstoakes@gmail.com

Link: https://lkml.kernel.org/r/20201108143731.GA74138@rlkSigned-off-by: Hui Su <sh_def@163.com>
Signed-off-by: NAlex Shi <alex.shi@linux.alibaba.com>
Signed-off-by: NLorenzo Stoakes <lstoakes@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Yafang Shao <laoar.shao@gmail.com>
Cc: Chris Down <chris@chrisdown.name>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some definitions are left unused, just clean them.

Link: https://lkml.kernel.org/r/20201108003834.12669-1-richard.weiyang@gmail.comSigned-off-by: NWei Yang <richard.weiyang@gmail.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Reviewed-by: NShakeel Butt <shakeelb@google.com>
Reviewed-by: NRoman Gushchin <guro@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add VM_WARN_ON_ONCE_PAGE() macro.

Since readahead page is charged on memcg too, in theory we don't have to
check this exception now.  Before safely remove them all, add a warning
for the unexpected !memcg.

Link: https://lkml.kernel.org/r/1604283436-18880-3-git-send-email-alex.shi@linux.alibaba.comSigned-off-by: NAlex Shi <alex.shi@linux.alibaba.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NHugh Dickins <hughd@google.com>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add missing comment for number of virtqueue.
Signed-off-by: NParav Pandit <parav@nvidia.com>
Reviewed-by: NEli Cohen <elic@nvidia.com>
Acked-by: NJason Wang <jasowang@redhat.com>
Link: https://lore.kernel.org/r/20201112064005.349268-2-parav@nvidia.comSigned-off-by: NMichael S. Tsirkin <mst@redhat.com>

Add a helper to read number of fast commit blocks from jbd2 superblock
and also rename the JBD2_MIN_FC_BLKS to
JBD2_DEFAULT_FAST_COMMIT_BLOCKS since this constant is just the
default number of fast commit blocks to use in case number of fast
commit blocks isn't set in jbd2 superblock.
Signed-off-by: NHarshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201120202232.2240293-2-harshadshirwadkar@gmail.comSigned-off-by: NTheodore Ts'o <tytso@mit.edu>

MLX5_GENERAL_OBJECT_TYPES types bitfield is 64-bit field.

Defining an enum for such bit fields on 32-bit platform results in below
warning.

./include/vdso/bits.h:7:26: warning: left shift count >= width of type [-Wshift-count-overflow]
                         ^
./include/linux/mlx5/mlx5_ifc.h:10716:46: note: in expansion of macro ‘BIT’
 MLX5_HCA_CAP_GENERAL_OBJECT_TYPES_SAMPLER = BIT(0x20),
                                             ^~~

Use 32-bit friendly BIT_ULL macro.

Fixes: 2a297089 ("net/mlx5: Add sample offload hardware bits and structures")
Signed-off-by: NParav Pandit <parav@nvidia.com>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLeon Romanovsky <leonro@nvidia.com>
Link: https://lore.kernel.org/r/20201213120641.216032-1-leon@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

This is only defined with CONFIG_PWM unset and was introduced together
with pwmchip_add_with_polarity() (which is only defined with CONFIG_PWM
enabled). I guess the series that introduced pwmchip_add_with_polarity()
had a different concept in earlier revisions and the !CONFIG_PWM part
was just not updated accordingly.

Given that there is no implementation for pwmchip_add_with_polarity()
without CONFIG_PWM, just drop pwmchip_add_inversed() instead of renaming
it to pwmchip_add_with_polarity().
Signed-off-by: NUwe Kleine-König <uwe@kleine-koenig.org>
Acked-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NThierry Reding <thierry.reding@gmail.com>

Kdoc does not like it when multiline comment follows the networking
style of starting right on the first line:

include/linux/phy.h:869: warning: Function parameter or member 'config_intr' not described in 'phy_driver'

Link: https://lore.kernel.org/r/20201215063750.3120976-1-kuba@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

There are some use cases for netdev_notify_peers in the context
when rtnl lock is already held. Introduce lockless version
of netdev_notify_peers call to save the extra code to call
	call_netdevice_notifiers(NETDEV_NOTIFY_PEERS, dev);
	call_netdevice_notifiers(NETDEV_RESEND_IGMP, dev);
After that, convert netdev_notify_peers to call the new helper.
Suggested-by: NNathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: NLijun Pan <ljp@linux.ibm.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The connector driver never modifies any cb_id passed to it, so add a const
qualifier to those arguments so callers can declare their struct cb_id as a
constant object.

Fixes build warnings like these when passing a constant struct cb_id:

  warning: passing argument 1 of ‘cn_add_callback’ discards ‘const’ qualifier from pointer target
Signed-off-by: NGeoff Levand <geoff@infradead.org>
Link: https://lore.kernel.org/r/a9e49c9e-67fa-16e7-0a6b-72f6bd30c58a@infradead.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Merge __follow_pte_pmd, follow_pte_pmd and follow_pte into a single
follow_pte function and just pass two additional NULL arguments for the
two previous follow_pte callers.

[sfr@canb.auug.org.au: merge fix for "s390/pci: remove races against pte updates"]
  Link: https://lkml.kernel.org/r/20201111221254.7f6a3658@canb.auug.org.au

Link: https://lkml.kernel.org/r/20201029101432.47011-3-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NMatthew Wilcox (Oracle) <willy@infradead.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

None of the relay users require the use of mutable structs for callbacks,
however the relay code does.  Instead of assigning the default callback
for subbuf_start, add a wrapper to conditionally call the client callback
if available, and fall back to default behaviour otherwise.

This lets all relay users make their struct rchan_callbacks const data.

[jani.nikula@intel.com: cleanups, per Christoph]
  Link: https://lkml.kernel.org/r/20201124115412.32402-1-jani.nikula@intel.com

Link: https://lkml.kernel.org/r/cc3ff292e4eb4fdc56bee3d690c7b8e39209cd37.1606153547.git.jani.nikula@intel.comSigned-off-by: NJani Nikula <jani.nikula@intel.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

All clients provide create_buf_file and remove_buf_file callbacks, and
they're required for relay to make sense.  There is no point in them being
optional.

Also document whether each callback is mandatory/optional.

Link: https://lkml.kernel.org/r/88003c1527386b93036e286e7917f1e33aec84ac.1606153547.git.jani.nikula@intel.comSigned-off-by: NJani Nikula <jani.nikula@intel.com>
Suggested-by: NChristoph Hellwig <hch@infradead.org>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>