The only left user of mmc_regulator_get_ocrmask() is the mmc core itself.
Therefore, let's drop the export and turn it into static.
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

The mmc regulator helper functions, are placed in the extensive core.c
file.  In a step towards trying to create a better structure of files,
avoiding too many lines of code per file, let's move these helpers to a new
file, regulator.c.

Moreover, this within this context it makes sense to also drop the export
of mmc_vddrange_to_ocrmask(), but instead let's make it internal to the mmc
core.
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

SD specs version 4.x and 5.x have a dedicated slices in the SCR register.
Higher versions will rely on a combination of the existing fields.
Signed-off-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

In MMC, the discard arg is a read-only ext_csd parameter - set it once
on card init. To be consistent, do that for SD as well even though its
discard arg is always 0x0.
Signed-off-by: NAvri Altman <avri.altman@wdc.com>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

The argument "override_active_level" made it possible to
enforce a specific polarity on the write-protect
GPIO line. All callers in the kernel pass "false" to this
call after I have converted all drivers to use GPIO machine
descriptors, so remove the argument and clean out this.

This kind of polarity inversion should be handled by the
GPIO descriptor inside the GPIO library if needed.

This rids us of one instance of the kludgy calls into
the gpiod_get_raw_value() API.
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

The BCM2835 MMC host driver uses a pointer to get from the private
bcm2835_host structure to the generic mmc_host structure.  However the
latter is always immediately preceding the former in memory, so compute
its address with a subtraction (which is cheaper than a dereference) and
drop the superfluous pointer.

No functional change intended.
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Alexander Graf <agraf@suse.de>
Reviewed-by: NAlexander Graf <agraf@suse.de>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

This fixes a regression introduced by
commit 0d2e778e
"net: phy: replace PHY_HAS_INTERRUPT with a check for
config_intr and ack_interrupt".

This assumes that a PHY cannot trigger interrupt unless
it has .config_intr() or .ack_interrupt() implemented.
A later patch makes the code assume both need to be
implemented for interrupts to be present.

But this PHY (which is inside a DSA) will happily
fire interrupts without either callback.

Implement dummy callbacks for .config_intr() and
.ack_interrupt() in the phy header to fix this.

Tested on the RTL8366RB on D-Link DIR-685.

Fixes: 0d2e778e ("net: phy: replace PHY_HAS_INTERRUPT with a check for config_intr and ack_interrupt")
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Align the payload of "user" and "logon" keys so that users of the
keyrings service can access it as a struct that requires more than
2-byte alignment.  fscrypt currently does this which results in the read
of fscrypt_key::size being misaligned as it needs 4-byte alignment.

Align to __alignof__(u64) rather than __alignof__(long) since in the
future it's conceivable that people would use structs beginning with
u64, which on some platforms would require more than 'long' alignment.
Reported-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Fixes: 2aa349f6 ("[PATCH] Keys: Export user-defined keyring operations")
Fixes: 88bd6ccd ("ext4 crypto: add encryption key management facilities")
Cc: stable@vger.kernel.org
Signed-off-by: NEric Biggers <ebiggers@google.com>
Tested-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <james.morris@microsoft.com>

clang warns about overflowing the data[] member in the struct pnpipehdr:

net/phonet/pep.c:295:8: warning: array index 4 is past the end of the array (which contains 1 element) [-Warray-bounds]
                        if (hdr->data[4] == PEP_IND_READY)
                            ^         ~
include/net/phonet/pep.h:66:3: note: array 'data' declared here
                u8              data[1];

Using a flexible array member at the end of the struct avoids the
warning, but since we cannot have a flexible array member inside
of the union, each index now has to be moved back by one, which
makes it a little uglier.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NRémi Denis-Courmont <remi@remlab.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

GSO packets with vnet_hdr must conform to a small set of gso_types.
The below commit uses flow dissection to drop packets that do not.

But it has false positives when the skb is not fully initialized.
Dissection needs skb->protocol and skb->network_header.

Infer skb->protocol from gso_type as the two must agree.
SKB_GSO_UDP can use both ipv4 and ipv6, so try both.

Exclude callers for which network header offset is not known.

Fixes: d5be7f63 ("net: validate untrusted gso packets without csum offload")
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fixes: 3b89ea9c ("net: Fix for_each_netdev_feature on Big endian")
Suggested-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts commit eff89628, which
deferred the processing of persistent memory reservations to a point
where the memory may have already been allocated and overwritten,
defeating the purpose.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NWill Deacon <will.deacon@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190215123333.21209-3-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

In the irqchip and EFI code, we have what basically amounts to a quirk
to work around a peculiarity in the GICv3 architecture, which permits
the system memory address of LPI tables to be programmable only once
after a CPU reset. This means kexec kernels must use the same memory
as the first kernel, and thus ensure that this memory has not been
given out for other purposes by the time the ITS init code runs, which
is not very early for secondary CPUs.

On systems with many CPUs, these reservations could overflow the
memblock reservation table, and this was addressed in commit:

  eff89628 ("efi/arm: Defer persistent reservations until after paging_init()")

However, this turns out to have made things worse, since the allocation
of page tables and heap space for the resized memblock reservation table
itself may overwrite the regions we are attempting to reserve, which may
cause all kinds of corruption, also considering that the ITS will still
be poking bits into that memory in response to incoming MSIs.

So instead, let's grow the static memblock reservation table on such
systems so it can accommodate these reservations at an earlier time.
This will permit us to revert the above commit in a subsequent patch.

[ mingo: Minor cleanups. ]
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: NMike Rapoport <rppt@linux.ibm.com>
Acked-by: NWill Deacon <will.deacon@arm.com>
Acked-by: NMarc Zyngier <marc.zyngier@arm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-efi@vger.kernel.org
Link: http://lkml.kernel.org/r/20190215123333.21209-2-ard.biesheuvel@linaro.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Syzkaller again found a path to a kernel crash through bad gso input.
By building an excessively large packet to cause an skb field to wrap.

If VIRTIO_NET_HDR_F_NEEDS_CSUM was set this would have been dropped in
skb_partial_csum_set.

GSO packets that do not set checksum offload are suspicious and rare.
Most callers of virtio_net_hdr_to_skb already pass them to
skb_probe_transport_header.

Move that test forward, change it to detect parse failure and drop
packets on failure as those cleary are not one of the legitimate
VIRTIO_NET_HDR_GSO types.

Fixes: bfd5f4a3 ("packet: Add GSO/csum offload support.")
Fixes: f43798c2 ("tun: Allow GSO using virtio_net_hdr")
Reported-by: Nsyzbot <syzkaller@googlegroups.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Reviewed-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The features attribute is of type u64 and stored in the native endianes on
the system. The for_each_set_bit() macro takes a pointer to a 32 bit array
and goes over the bits in this area. On little Endian systems this also
works with an u64 as the most significant bit is on the highest address,
but on big endian the words are swapped. When we expect bit 15 here we get
bit 47 (15 + 32).

This patch converts it more or less to its own for_each_set_bit()
implementation which works on 64 bit integers directly. This is then
completely in host endianness and should work like expected.

Fixes: fd867d51 ("net/core: generic support for disabling netdev features down stack")
Signed-off-by: NHauke Mehrtens <hauke.mehrtens@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the request_key() upcall mechanism there's a dependency loop by which if
a key type driver overrides the ->request_key hook and the userspace side
manages to lose the authorisation key, the auth key and the internal
construction record (struct key_construction) can keep each other pinned.

Fix this by the following changes:

 (1) Killing off the construction record and using the auth key instead.

 (2) Including the operation name in the auth key payload and making the
     payload available outside of security/keys/.

 (3) The ->request_key hook is given the authkey instead of the cons
     record and operation name.

Changes (2) and (3) allow the auth key to naturally be cleaned up if the
keyring it is in is destroyed or cleared or the auth key is unlinked.

Fixes: 7ee02a316600 ("keys: Fix dependency loop between construction record and auth key")
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NJames Morris <james.morris@microsoft.com>

The upcoming GCC 9 release extends the -Wmissing-attributes warnings
(enabled by -Wall) to C and aliases: it warns when particular function
attributes are missing in the aliases but not in their target.

In particular, it triggers for all the init/cleanup_module
aliases in the kernel (defined by the module_init/exit macros),
ending up being very noisy.

These aliases point to the __init/__exit functions of a module,
which are defined as __cold (among other attributes). However,
the aliases themselves do not have the __cold attribute.

Since the compiler behaves differently when compiling a __cold
function as well as when compiling paths leading to calls
to __cold functions, the warning is trying to point out
the possibly-forgotten attribute in the alias.

In order to keep the warning enabled, we decided to silence
this case. Ideally, we would mark the aliases directly
as __init/__exit. However, there are currently around 132 modules
in the kernel which are missing __init/__exit in their init/cleanup
functions (either because they are missing, or for other reasons,
e.g. the functions being called from somewhere else); and
a section mismatch is a hard error.

A conservative alternative was to mark the aliases as __cold only.
However, since we would like to eventually enforce __init/__exit
to be always marked,  we chose to use the new __copy function
attribute (introduced by GCC 9 as well to deal with this).
With it, we copy the attributes used by the target functions
into the aliases. This way, functions that were not marked
as __init/__exit won't have their aliases marked either,
and therefore there won't be a section mismatch.

Note that the warning would go away marking either the extern
declaration, the definition, or both. However, we only mark
the definition of the alias, since we do not want callers
(which only see the declaration) to be compiled as if the function
was __cold (and therefore the paths leading to those calls
would be assumed to be unlikely).

Link: https://lore.kernel.org/lkml/20190123173707.GA16603@gmail.com/
Link: https://lore.kernel.org/lkml/20190206175627.GA20399@gmail.com/Suggested-by: NMartin Sebor <msebor@gcc.gnu.org>
Acked-by: NJessica Yu <jeyu@kernel.org>
Signed-off-by: NMiguel Ojeda <miguel.ojeda.sandonis@gmail.com>

From the GCC manual:

  copy
  copy(function)

    The copy attribute applies the set of attributes with which function
    has been declared to the declaration of the function to which
    the attribute is applied. The attribute is designed for libraries
    that define aliases or function resolvers that are expected
    to specify the same set of attributes as their targets. The copy
    attribute can be used with functions, variables, or types. However,
    the kind of symbol to which the attribute is applied (either
    function or variable) must match the kind of symbol to which
    the argument refers. The copy attribute copies only syntactic and
    semantic attributes but not attributes that affect a symbol’s
    linkage or visibility such as alias, visibility, or weak.
    The deprecated attribute is also not copied.

  https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html

The upcoming GCC 9 release extends the -Wmissing-attributes warnings
(enabled by -Wall) to C and aliases: it warns when particular function
attributes are missing in the aliases but not in their target, e.g.:

    void __cold f(void) {}
    void __alias("f") g(void);

diagnoses:

    warning: 'g' specifies less restrictive attribute than
    its target 'f': 'cold' [-Wmissing-attributes]

Using __copy(f) we can copy the __cold attribute from f to g:

    void __cold f(void) {}
    void __copy(f) __alias("f") g(void);

This attribute is most useful to deal with situations where an alias
is declared but we don't know the exact attributes the target has.

For instance, in the kernel, the widely used module_init/exit macros
define the init/cleanup_module aliases, but those cannot be marked
always as __init/__exit since some modules do not have their
functions marked as such.
Suggested-by: NMartin Sebor <msebor@gcc.gnu.org>
Reviewed-by: NNick Desaulniers <ndesaulniers@google.com>
Signed-off-by: NMiguel Ojeda <miguel.ojeda.sandonis@gmail.com>

Russell suggested to remove the locking from phy_is_started() because
the read is atomic anyway and actually the locking may be more
misleading.

Fixes: 2b3e88ea ("net: phy: improve phy state checking")
Suggested-by: NRussell King - ARM Linux admin <linux@armlinux.org.uk>
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With many active TCP sockets, fat TCP sockets could fool
__sk_mem_raise_allocated() thanks to an overflow.

They would increase their share of the memory, instead
of decreasing it.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 36c0f7f0 ("arch: unexport asm/shmparam.h for all
architectures") is different from the patch I submitted.

My patch is this:

  https://lore.kernel.org/lkml/1546904307-11124-1-git-send-email-yamada.masahiro@socionext.com/T/#u

The file renaming part:

  rename include/{uapi => }/asm-generic/shmparam.h (100%)

was lost when it was picked up.

I think it was an accident because Andrew did not say anything.

Link: http://lkml.kernel.org/r/1549158277-24558-1-git-send-email-yamada.masahiro@socionext.com
Fixes: 36c0f7f0 ("arch: unexport asm/shmparam.h for all architectures")
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Field idiag_ext in struct inet_diag_req_v2 used as bitmap of requested
extensions has only 8 bits. Thus extensions starting from DCTCPINFO
cannot be requested directly. Some of them included into response
unconditionally or hook into some of lower 8 bits.

Extension INET_DIAG_CLASS_ID has not way to request from the beginning.

This patch bundle it with INET_DIAG_TCLASS (ipv6 tos), fixes space
reservation, and documents behavior for other extensions.

Also this patch adds fallback to reporting socket priority. This filed
is more widely used for traffic classification because ipv4 sockets
automatically maps TOS to priority and default qdisc pfifo_fast knows
about that. But priority could be changed via setsockopt SO_PRIORITY so
INET_DIAG_TOS isn't enough for predicting class.

Also cgroup2 obsoletes net_cls classid (it always zero), but we cannot
reuse this field for reporting cgroup2 id because it is 64-bit (ino+gen).

So, after this patch INET_DIAG_CLASS_ID will report socket priority
for most common setup when net_cls isn't set and/or cgroup2 in use.

Fixes: 0888e372 ("net: inet: diag: expose sockets cgroup classid")
Signed-off-by: NKonstantin Khlebnikov <khlebnikov@yandex-team.ru>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vince (and later on Ravi) reported crashes in the BTS code during
fuzzing with the following backtrace:

  general protection fault: 0000 [#1] SMP PTI
  ...
  RIP: 0010:perf_prepare_sample+0x8f/0x510
  ...
  Call Trace:
   <IRQ>
   ? intel_pmu_drain_bts_buffer+0x194/0x230
   intel_pmu_drain_bts_buffer+0x160/0x230
   ? tick_nohz_irq_exit+0x31/0x40
   ? smp_call_function_single_interrupt+0x48/0xe0
   ? call_function_single_interrupt+0xf/0x20
   ? call_function_single_interrupt+0xa/0x20
   ? x86_schedule_events+0x1a0/0x2f0
   ? x86_pmu_commit_txn+0xb4/0x100
   ? find_busiest_group+0x47/0x5d0
   ? perf_event_set_state.part.42+0x12/0x50
   ? perf_mux_hrtimer_restart+0x40/0xb0
   intel_pmu_disable_event+0xae/0x100
   ? intel_pmu_disable_event+0xae/0x100
   x86_pmu_stop+0x7a/0xb0
   x86_pmu_del+0x57/0x120
   event_sched_out.isra.101+0x83/0x180
   group_sched_out.part.103+0x57/0xe0
   ctx_sched_out+0x188/0x240
   ctx_resched+0xa8/0xd0
   __perf_event_enable+0x193/0x1e0
   event_function+0x8e/0xc0
   remote_function+0x41/0x50
   flush_smp_call_function_queue+0x68/0x100
   generic_smp_call_function_single_interrupt+0x13/0x30
   smp_call_function_single_interrupt+0x3e/0xe0
   call_function_single_interrupt+0xf/0x20
   </IRQ>

The reason is that while event init code does several checks
for BTS events and prevents several unwanted config bits for
BTS event (like precise_ip), the PERF_EVENT_IOC_PERIOD allows
to create BTS event without those checks being done.

Following sequence will cause the crash:

If we create an 'almost' BTS event with precise_ip and callchains,
and it into a BTS event it will crash the perf_prepare_sample()
function because precise_ip events are expected to come
in with callchain data initialized, but that's not the
case for intel_pmu_drain_bts_buffer() caller.

Adding a check_period callback to be called before the period
is changed via PERF_EVENT_IOC_PERIOD. It will deny the change
if the event would become BTS. Plus adding also the limit_period
check as well.
Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NJiri Olsa <jolsa@kernel.org>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20190204123532.GA4794@kravaSigned-off-by: NIngo Molnar <mingo@kernel.org>

bpf_skb_change_proto and bpf_skb_adjust_room change skb header length.
For GSO packets they adjust gso_size to maintain the same MTU.

The gso size can only be safely adjusted on bytestream protocols.
Commit d02f51cb ("bpf: fix bpf_skb_adjust_net/bpf_skb_proto_xlat
to deal with gso sctp skbs") excluded SKB_GSO_SCTP.

Since then type SKB_GSO_UDP_L4 has been added, whose contents are one
gso_size unit per datagram. Also exclude these.

Move from a blacklist to a whitelist check to future proof against
additional such new GSO types, e.g., for fraglist based GRO.

Fixes: bec1f6f6 ("udp: generate gso with UDP_SEGMENT")
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

According to the algorithm described in the comment block at the
beginning of ip_rt_send_redirect, the host should try to send
'ip_rt_redirect_number' ICMP redirect packets with an exponential
backoff and then stop sending them at all assuming that the destination
ignores redirects.
If the device has previously sent some ICMP error packets that are
rate-limited (e.g TTL expired) and continues to receive traffic,
the redirect packets will never be transmitted. This happens since
peer->rate_tokens will be typically greater than 'ip_rt_redirect_number'
and so it will never be reset even if the redirect silence timeout
(ip_rt_redirect_silence) has elapsed without receiving any packet
requiring redirects.

Fix it by using a dedicated counter for the number of ICMP redirect
packets that has been sent by the host

I have not been able to identify a given commit that introduced the
issue since ip_rt_send_redirect implements the same rate-limiting
algorithm from commit 1da177e4 ("Linux-2.6.12-rc2")
Signed-off-by: NLorenzo Bianconi <lorenzo.bianconi@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The kblockd workqueue is created with the WQ_MEM_RECLAIM flag set.
This generates a rescuer thread for that queue that will trigger when
the CPU is under heavy load and collect the uncompleted work.

In the case of mmc, this creates the possibility of a deadlock when
there are multiple partitions on the device as other blk-mq work is
also run on the same queue. For example:

- worker 0 claims the mmc host to work on partition 1
- worker 1 attempts to claim the host for partition 2 but has to wait
  for worker 0 to finish
- worker 0 schedules complete_work to release the host
- rescuer thread is triggered after time-out and collects the dangling
  work
- rescuer thread attempts to complete the work in order starting with
  claim host
- the task to release host is now blocked by a task to claim it and
  will never be called

The above results in multiple hung tasks that lead to failures to
mount partitions.

Handling complete_work on a separate workqueue avoids this by keeping
the work completion tasks separate from the other blk-mq work. This
allows the host to be released without getting blocked by other tasks
attempting to claim the host.
Signed-off-by: NZachary Hays <zhays@lexmark.com>
Fixes: 81196976 ("mmc: block: Add blk-mq support")
Cc: <stable@vger.kernel.org>
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>

Currently, blktrace will not show requests that don't have any data as
rq->__sector is initialized to -1 which is out of device range and thus
discarded by act_log_check(). This is most notably the case for cache
flush requests sent to the device. Fix the problem by making
blk_rq_trace_sector() return 0 for requests without initialized sector.
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

It is normal user behaviour to start, stop, then start a stream
again without closing it. Currently this works for compressed
playback streams but not capture ones.

The states on a compressed capture stream go directly from OPEN to
PREPARED, unlike a playback stream which moves to SETUP and waits
for a write of data before moving to PREPARED. Currently however,
when a stop is sent the state is set to SETUP for both types of
streams. This leaves a capture stream in the situation where a new
start can't be sent as that requires the state to be PREPARED and
a new set_params can't be sent as that requires the state to be
OPEN. The only option being to close the stream, and then reopen.

Correct this issues by allowing snd_compr_drain_notify to set the
state depending on the stream direction, as we already do in
set_params.

Fixes: 49bb6402 ("ALSA: compress_core: Add support for capture streams")
Signed-off-by: NCharles Keepax <ckeepax@opensource.cirrus.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

There's no reason to expose struct vring_packed in UAPI - if we do we
won't be able to change or drop it, and it's not part of any interface.

Let's move it to virtio_ring.c

Cc: Tiwei Bie <tiwei.bie@intel.com>
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>

xfrm_state_put() moves struct xfrm_state to the GC list
and schedules the GC work to clean it up. On net exit call
path, xfrm_state_flush() is called to clean up and
xfrm_flush_gc() is called to wait for the GC work to complete
before exit.

However, this doesn't work because one of the ->destructor(),
ipcomp_destroy(), schedules the same GC work again inside
the GC work. It is hard to wait for such a nested async
callback. This is also why syzbot still reports the following
warning:

 WARNING: CPU: 1 PID: 33 at net/ipv6/xfrm6_tunnel.c:351 xfrm6_tunnel_net_exit+0x2cb/0x500 net/ipv6/xfrm6_tunnel.c:351
 ...
  ops_exit_list.isra.0+0xb0/0x160 net/core/net_namespace.c:153
  cleanup_net+0x51d/0xb10 net/core/net_namespace.c:551
  process_one_work+0xd0c/0x1ce0 kernel/workqueue.c:2153
  worker_thread+0x143/0x14a0 kernel/workqueue.c:2296
  kthread+0x357/0x430 kernel/kthread.c:246
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352

In fact, it is perfectly fine to bypass GC and destroy xfrm_state
synchronously on net exit call path, because it is in process context
and doesn't need a work struct to do any blocking work.

This patch introduces xfrm_state_put_sync() which simply bypasses
GC, and lets its callers to decide whether to use this synchronous
version. On net exit path, xfrm_state_fini() and
xfrm6_tunnel_net_exit() use it. And, as ipcomp_destroy() itself is
blocking, it can use xfrm_state_put_sync() directly too.

Also rename xfrm_state_gc_destroy() to ___xfrm_state_destroy() to
reflect this change.

Fixes: b48c05ab ("xfrm: Fix warning in xfrm6_tunnel_net_exit.")
Reported-and-tested-by: syzbot+e9aebef558e3ed673934@syzkaller.appspotmail.com
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NSteffen Klassert <steffen.klassert@secunet.com>

Anonymous sets that are bound to rules from the same transaction trigger
a kernel splat from the abort path due to double set list removal and
double free.

This patch updates the logic to search for the transaction that is
responsible for creating the set and disable the set list removal and
release, given the rule is now responsible for this. Lookup is reverse
since the transaction that adds the set is likely to be at the tail of
the list.

Moreover, this patch adds the unbind step to deliver the event from the
commit path.  This should not be done from the worker thread, since we
have no guarantees of in-order delivery to the listener.

This patch removes the assumption that both activate and deactivate
callbacks need to be provided.

Fixes: cd5125d8 ("netfilter: nf_tables: split set destruction in deactivate and destroy phase")
Reported-by: NMikhail Morfikov <mmorfikov@gmail.com>
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>

"Resource Control" is a very broad term for this CPU feature, and a term
that is also associated with containers, cgroups etc. This can easily
cause confusion.

Make the user prompt more specific. Match the config symbol name.

 [ bp: In the future, the corresponding ARM arch-specific code will be
   under ARM_CPU_RESCTRL and the arch-agnostic bits will be carved out
   under the CPU_RESCTRL umbrella symbol. ]
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Cc: Babu Moger <Babu.Moger@amd.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Morse <james.morse@arm.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: linux-doc@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Pu Wen <puwen@hygon.cn>
Cc: Reinette Chatre <reinette.chatre@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: x86-ml <x86@kernel.org>
Link: https://lkml.kernel.org/r/20190130195621.GA30653@cmpxchg.org

On an arm64 ThunderX2 server, the first kmemleak scan would crash [1]
with CONFIG_DEBUG_VM_PGFLAGS=y due to page_to_nid() found a pfn that is
not directly mapped (MEMBLOCK_NOMAP).  Hence, the page->flags is
uninitialized.

This is due to the commit 9f1eb38e ("mm, kmemleak: little
optimization while scanning") starts to use pfn_to_online_page() instead
of pfn_valid().  However, in the CONFIG_MEMORY_HOTPLUG=y case,
pfn_to_online_page() does not call memblock_is_map_memory() while
pfn_valid() does.

Historically, the commit 68709f45 ("arm64: only consider memblocks
with NOMAP cleared for linear mapping") causes pages marked as nomap
being no long reassigned to the new zone in memmap_init_zone() by
calling __init_single_page().

Since the commit 2d070eab ("mm: consider zone which is not fully
populated to have holes") introduced pfn_to_online_page() and was
designed to return a valid pfn only, but it is clearly broken on arm64.

Therefore, let pfn_to_online_page() call pfn_valid_within(), so it can
handle nomap thanks to the commit f52bb98f ("arm64: mm: always
enable CONFIG_HOLES_IN_ZONE"), while it will be optimized away on
architectures where have no HOLES_IN_ZONE.

[1]
  Unable to handle kernel NULL pointer dereference at virtual address 0000000000000006
  Mem abort info:
    ESR = 0x96000005
    Exception class = DABT (current EL), IL = 32 bits
    SET = 0, FnV = 0
    EA = 0, S1PTW = 0
  Data abort info:
    ISV = 0, ISS = 0x00000005
    CM = 0, WnR = 0
  Internal error: Oops: 96000005 [#1] SMP
  CPU: 60 PID: 1408 Comm: kmemleak Not tainted 5.0.0-rc2+ #8
  pstate: 60400009 (nZCv daif +PAN -UAO)
  pc : page_mapping+0x24/0x144
  lr : __dump_page+0x34/0x3dc
  sp : ffff00003a5cfd10
  x29: ffff00003a5cfd10 x28: 000000000000802f
  x27: 0000000000000000 x26: 0000000000277d00
  x25: ffff000010791f56 x24: ffff7fe000000000
  x23: ffff000010772f8b x22: ffff00001125f670
  x21: ffff000011311000 x20: ffff000010772f8b
  x19: fffffffffffffffe x18: 0000000000000000
  x17: 0000000000000000 x16: 0000000000000000
  x15: 0000000000000000 x14: ffff802698b19600
  x13: ffff802698b1a200 x12: ffff802698b16f00
  x11: ffff802698b1a400 x10: 0000000000001400
  x9 : 0000000000000001 x8 : ffff00001121a000
  x7 : 0000000000000000 x6 : ffff0000102c53b8
  x5 : 0000000000000000 x4 : 0000000000000003
  x3 : 0000000000000100 x2 : 0000000000000000
  x1 : ffff000010772f8b x0 : ffffffffffffffff
  Process kmemleak (pid: 1408, stack limit = 0x(____ptrval____))
  Call trace:
   page_mapping+0x24/0x144
   __dump_page+0x34/0x3dc
   dump_page+0x28/0x4c
   kmemleak_scan+0x4ac/0x680
   kmemleak_scan_thread+0xb4/0xdc
   kthread+0x12c/0x13c
   ret_from_fork+0x10/0x18
  Code: d503201f f9400660 36000040 d1000413 (f9400661)
  ---[ end trace 4d4bd7f573490c8e ]---
  Kernel panic - not syncing: Fatal exception
  SMP: stopping secondary CPUs
  Kernel Offset: disabled
  CPU features: 0x002,20000c38
  Memory Limit: none
  ---[ end Kernel panic - not syncing: Fatal exception ]---

Link: http://lkml.kernel.org/r/20190122132916.28360-1-cai@lca.pw
Fixes: 9f1eb38e ("mm, kmemleak: little optimization while scanning")
Signed-off-by: NQian Cai <cai@lca.pw>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Arkadiusz reported that enabling memcg's group oom killing causes
strange memcg statistics where there is no task in a memcg despite the
number of tasks in that memcg is not 0.  It turned out that there is a
bug in wake_oom_reaper() which allows enqueuing same task twice which
makes impossible to decrease the number of tasks in that memcg due to a
refcount leak.

This bug existed since the OOM reaper became invokable from
task_will_free_mem(current) path in out_of_memory() in Linux 4.7,

  T1@P1     |T2@P1     |T3@P1     |OOM reaper
  ----------+----------+----------+------------
                                   # Processing an OOM victim in a different memcg domain.
                        try_charge()
                          mem_cgroup_out_of_memory()
                            mutex_lock(&oom_lock)
             try_charge()
               mem_cgroup_out_of_memory()
                 mutex_lock(&oom_lock)
  try_charge()
    mem_cgroup_out_of_memory()
      mutex_lock(&oom_lock)
                            out_of_memory()
                              oom_kill_process(P1)
                                do_send_sig_info(SIGKILL, @P1)
                                mark_oom_victim(T1@P1)
                                wake_oom_reaper(T1@P1) # T1@P1 is enqueued.
                            mutex_unlock(&oom_lock)
                 out_of_memory()
                   mark_oom_victim(T2@P1)
                   wake_oom_reaper(T2@P1) # T2@P1 is enqueued.
                 mutex_unlock(&oom_lock)
      out_of_memory()
        mark_oom_victim(T1@P1)
        wake_oom_reaper(T1@P1) # T1@P1 is enqueued again due to oom_reaper_list == T2@P1 && T1@P1->oom_reaper_list == NULL.
      mutex_unlock(&oom_lock)
                                   # Completed processing an OOM victim in a different memcg domain.
                                   spin_lock(&oom_reaper_lock)
                                   # T1P1 is dequeued.
                                   spin_unlock(&oom_reaper_lock)

but memcg's group oom killing made it easier to trigger this bug by
calling wake_oom_reaper() on the same task from one out_of_memory()
request.

Fix this bug using an approach used by commit 855b0183 ("oom,
oom_reaper: disable oom_reaper for oom_kill_allocating_task").  As a
side effect of this patch, this patch also avoids enqueuing multiple
threads sharing memory via task_will_free_mem(current) path.

Link: http://lkml.kernel.org/r/e865a044-2c10-9858-f4ef-254bc71d6cc2@i-love.sakura.ne.jp
Link: http://lkml.kernel.org/r/5ee34fc6-1485-34f8-8790-903ddabaa809@i-love.sakura.ne.jp
Fixes: af8e15cc ("oom, oom_reaper: do not enqueue task if it is on the oom_reaper_list head")
Signed-off-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: NArkadiusz Miskiewicz <arekm@maven.pl>
Tested-by: NArkadiusz Miskiewicz <arekm@maven.pl>
Acked-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NRoman Gushchin <guro@fb.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Aleksa Sarai <asarai@suse.de>
Cc: Jay Kamat <jgkamat@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In the current code, the codec registration may happen both at the
codec bind time and the end of the controller probe time.  In a rare
occasion, they race with each other, leading to Oops due to the still
uninitialized card device.

This patch introduces a simple flag to prevent the codec registration
at the codec bind time as long as the controller probe is going on.
The controller probe invokes snd_card_register() that does the whole
registration task, and we don't need to register each piece
beforehand.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Disabled preemption is necessary for proper access to per-cpu maps
from BPF programs.

But the sender side of socket filters didn't have preemption disabled:
unix_dgram_sendmsg->sk_filter->sk_filter_trim_cap->bpf_prog_run_save_cb->BPF_PROG_RUN

and a combination of af_packet with tun device didn't disable either:
tpacket_snd->packet_direct_xmit->packet_pick_tx_queue->ndo_select_queue->
  tun_select_queue->tun_ebpf_select_queue->bpf_prog_run_clear_cb->BPF_PROG_RUN

Disable preemption before executing BPF programs (both classic and extended).
Reported-by: NJann Horn <jannh@google.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

There's an issue with how sense requests are handled in IDE. If ide-cd
encounters an error, it queues a sense request. With how IDE request
handling is done, this is the next request we need to handle. But it's
impossible to guarantee this, as another request could come in between
the sense being queued, and ->queue_rq() being run and handling it. If
that request ALSO fails, then we attempt to doubly queue the single
sense request we have.

Since we only support one active request at the time, defer request
processing when a sense request is queued.

Fixes: 60033520 "ide: convert to blk-mq"
Reported-by: NHe Zhe <zhe.he@windriver.com>
Tested-by: NHe Zhe <zhe.he@windriver.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

According to ARM IHI 0069C (ID070116), we should use GITS_TYPER's
bits [7:4] as ITT_entry_size instead of [8:4]. Although this is
pretty annoying, it only results in a potential over-allocation
of memory, and nothing bad happens.

Fixes: 3dfa576b ("irqchip/gic-v3-its: Add probing for VLPI properties")
Signed-off-by: NZenghui Yu <yuzenghui@huawei.com>
[maz: massaged subject and commit message]
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>

If we don't have DT then stmmac_clk will not be available. Let's add a
new Platform Data field so that we can specify the refclk by this mean.

This way we can still use the coalesce command in PCI based setups.
Signed-off-by: NJose Abreu <joabreu@synopsys.com>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

While implementing ipvlan l3 and l3s mode for kubernetes CNI plugin,
I ran into the issue that while l3 mode is working fine, l3s mode
does not have any connectivity to kube-apiserver and hence all pods
end up in Error state as well. The ipvlan master device sits on
top of a bond device and hostns traffic to kube-apiserver (also running
in hostns) is DNATed from 10.152.183.1:443 to 139.178.29.207:37573
where the latter is the address of the bond0. While in l3 mode, a
curl to https://10.152.183.1:443 or to https://139.178.29.207:37573
works fine from hostns, neither of them do in case of l3s. In the
latter only a curl to https://127.0.0.1:37573 appeared to work where
for local addresses of bond0 I saw kernel suddenly starting to emit
ARP requests to query HW address of bond0 which remained unanswered
and neighbor entries in INCOMPLETE state. These ARP requests only
happen while in l3s.

Debugging this further, I found the issue is that l3s mode is piggy-
backing on l3 master device, and in this case local routes are using
l3mdev_master_dev_rcu(dev) instead of net->loopback_dev as per commit
f5a0aab8 ("net: ipv4: dst for local input routes should use l3mdev
if relevant") and 5f02ce24 ("net: l3mdev: Allow the l3mdev to be
a loopback"). I found that reverting them back into using the
net->loopback_dev fixed ipvlan l3s connectivity and got everything
working for the CNI.

Now judging from 4fbae7d8 ("ipvlan: Introduce l3s mode") and the
l3mdev paper in [0] the only sole reason why ipvlan l3s is relying
on l3 master device is to get the l3mdev_ip_rcv() receive hook for
setting the dst entry of the input route without adding its own
ipvlan specific hacks into the receive path, however, any l3 domain
semantics beyond just that are breaking l3s operation. Note that
ipvlan also has the ability to dynamically switch its internal
operation from l3 to l3s for all ports via ipvlan_set_port_mode()
at runtime. In any case, l3 vs l3s soley distinguishes itself by
'de-confusing' netfilter through switching skb->dev to ipvlan slave
device late in NF_INET_LOCAL_IN before handing the skb to L4.

Minimal fix taken here is to add a IFF_L3MDEV_RX_HANDLER flag which,
if set from ipvlan setup, gets us only the wanted l3mdev_l3_rcv() hook
without any additional l3mdev semantics on top. This should also have
minimal impact since dev->priv_flags is already hot in cache. With
this set, l3s mode is working fine and I also get things like
masquerading pod traffic on the ipvlan master properly working.

  [0] https://netdevconf.org/1.2/papers/ahern-what-is-l3mdev-paper.pdf

Fixes: f5a0aab8 ("net: ipv4: dst for local input routes should use l3mdev if relevant")
Fixes: 5f02ce24 ("net: l3mdev: Allow the l3mdev to be a loopback")
Fixes: 4fbae7d8 ("ipvlan: Introduce l3s mode")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Cc: Mahesh Bandewar <maheshb@google.com>
Cc: David Ahern <dsa@cumulusnetworks.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Martynas Pumputis <m@lambda.lt>
Acked-by: NDavid Ahern <dsa@cumulusnetworks.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>