- Remove the relative input device
- Add an absolute input device
- Misc. cleanup and bug fixing

The patch is sizable due to the cleanup from removing the relative input
device (net -112 lines).
Signed-off-by: NRobert Love <rml@novell.com>
Cc: Dmitry Torokhov <dtor_core@ameritech.net>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Al found a potential problem in epoll_create(), where the
file->private_data member was set after fd_install().  This is obviously
wrong since another thread might do a close() on that fd# before we set the
file->private_data member.  This goes over 2.6.13 and passes a few basic
tests I've done here.

(akpm: snuck in a kzalloc() cleanup too)
Signed-off-by: NDavide Libenzi <davidel@xmailserver.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Whitespace standardisation.

Cc: Abhay Salunke <Abhay_Salunke@dell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

BUG fixes:

  The driver used to allocate memory with spinlock held which has been
  fixed in this patch.

  The driver was printing the entire buffer when it received a invalid
  entry in image_type.  The fix is to only print a warning message and not
  the buffer.

Usability enhancements:

  It is possible that due to user error the /sys/class/firmware/dell_rbu
  entries might be missing, this can happen if the user does the following

	echo 1 > /sys/class/firmware/dell_rbu/loading
	echo 0 > /sys/class/firmware/dell_rbu/loading

  This will make the entries in /sys/class/firmware/ to disappear and the
  only way get them back was bby unloading and loading the driver.

  This patch makes the user recreate these entries by echoing init in to
  image_type.

This patch has been tested with Libsmbios and Dell OpenManage.
Signed-off-by: NAbhay Salunke <Abhay_Salunke@dell.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Using native cmpxchg offers a slight performance improvement in uml/i386.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

2.6.13 incorporated Alan Cox's patch for /proc/sys/fs/suid_dumpable (one
version of this patch can be found here
http://marc.theaimsgroup.com/?l=linux-kernel&m=109647550421014&w=2 ).

This patch also made corresponding changes in kernel/sys.c to change the
prctl() PR_SET_DUMPABLE operation so that the permitted range of 'arg2' was
modified from 0..1 to 0..2.

However, a corresponding change was not made for PR_GET_DUMPABLE: if the
dumpable flag is non-zero, then PR_GET_DUMPABLE always returns 1, so that
the caller can't determine the true setting of this flag.
Acked-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Small typo in relayfs documentation.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Added ppc_sys device and system definitions for PowerQUICC I devices.  This
will allow drivers for PQI to be proper platform device drivers.  Currently
sys section contains only MPC885 and MPC866.  Identification should be done
with identify_ppc_sys_by_name call, with board-specific "name" string
passed, since PQI do not have any register that could identify the SOC.
Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add WRITE_LONG_2 as write safe commands, which which allows normal users to
make a c1-, c2- and cu-scan (so called cxscan) with readcd on
cxscan-capable cd/dvd-writers
Signed-off-by: NJens Axboe <axboe@suse.de>
Cc: James Bottomley <James.Bottomley@steeleye.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

I forgot to include siginfo.h when I added data breakpoint support.  We
must include it in a round-a-bout way in mainline.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

That should be -EINVAL for both.
Signed-off-by: NSerge Hallyn <serue@us.ibm.com>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We don't put braces around single statements, thanks.

Cc: Serge Hallyn <serue@us.ibm.com>
Cc: James Morris <jmorris@namei.org>
Cc: Chris Wright <chrisw@osdl.org>
Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

include/asm/desc.h: In function `load_LDT':
include/asm/desc.h:209: warning: implicit declaration of function `get_cpu'
include/asm/desc.h:211: warning: implicit declaration of function `put_cpu'

Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NDave Hansen <haveblue@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

For EXPORT_SYMBOL.

Cc: Andi Kleen <ak@muc.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix up some pm_message_t types
Signed-Off-By: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

asm/elf.h is bad on x86_64, and i386 doesn't need it any more after Al's
cleanup.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

do_aio used to return -1 on error instead of errno.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The serial UML OS-abstraction layer patch (um/kernel dir).

This joins mem_user.c and mem.c files.
Signed-off-by: NGennady Sharapov <Gennady.V.Sharapov@intel.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The serial UML OS-abstraction layer patch (um/kernel dir).

This moves all system calls from mem_user.c and tempfile.c files under
os-Linux dir.
Signed-off-by: NGennady Sharapov <Gennady.V.Sharapov@intel.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The poster child for this patch is the third tuntap_user hunk.  When an ioctl
fails, it properly closes the opened file descriptor and returns.  However,
the close resets errno to 0, and the 'return errno' that follows returns 0
rather than the value that ioctl set.  This caused the caller to believe that
the device open succeeded and had opened file descriptor 0, which caused no
end of interesting behavior.

The rest of this patch is a pass through the UML sources looking for places
where errno could be reset before being passed back out.  A common culprit is
printk, which could call write, being called before errno is returned.

In some cases, where the code ends up being much smaller, I just deleted the
printk.

There was another case where a caller of run_helper looked at errno after a
failure, rather than the return value of run_helper, which was the errno value
that it wanted.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

These ugly double-casts are the result of gdb complaining about size
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

linux/inet.h isn't needed, and on my system, is empty.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This removes a file which is no longer used.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch implements a stack trace for a thread, not unlike sysrq-t does.
The advantage to this is that a break point can be placed on showreqs, so that
upon showing the stack, you jump immediately into the debugger.  While sysrq-t
does the same thing, sysrq-t shows *all* threads stacks.  It also doesn't work
right now.  In the future, I thought it might be acceptable to make this show
all pids stacks, but perhaps leaving well enough alone and just using sysrq-t
would be okay.  For now, upon receiving the stack command, UML switches
context to that thread, dumps its registers, and then switches context back to
the original thread.  Since UML compacts all threads into one of 4 host
threads, this sort of mechanism could be expanded in the future to include
other debugging helpers that sysrq does not cover.

Note by jdike - The main benefit to this is that it brings an arbitrary thread
back into context, where it can be examined by gdb.  The fact that it dumps it
stack is secondary.  This provides the capability to examine a sleeping
thread, which has existed in tt mode, but not in skas mode until now.

Also, the other threads, that sysrq doesn't cover, can be gdb-ed directly
anyway.

Signed-off-by: Allan Graves<allan.graves@gmail.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch moves code that is in both switch_to_tt and switch_to_skas to the
top level _switch_to function, keeping us from duplicating code.  It is
required for the stack trace patch to work properly.
Signed-off-by: NAllan Graves <allan.graves@gmail.com>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When an asynchronous interruption occurs during the execution of the
'critical section' within the generic interruption handling code (entry.S),
a faulty check for a userspace PSW may result in a corrupted kernel stack
pointer which subsequently triggers a stack overflow check.
Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a problem wherein a new-born task is added to a dead CPU.
Signed-off-by: NSrivatsa Vaddagiri <vatsa@in.ibm.com>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Acked-by: NShaohua Li <shaohua.li@intel.com>
Acked-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Remove nowhere referenced file (egrep "hw-bse\." didn't find anything).
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Acked-by: NIan Molton <spyro@f2s.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add code to support the re-IPL method using diagnose 0x308.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Disable preemption in show_cpuinfo to avoid problems and the warning about
smp_processor_id.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Got confused with the crypto update.  The last patch added a call to
destroy_workqueue() for a non-existent workqueue with the comment "Remove
device workqueue on module unload".  This is nonsense.  Remove the offending
hunk again.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Calculate correct size for bl_dev array.  It should be 8KB instead of 512KB
for 2^16 bits.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Update default configuration of s390.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add partition definitions for the new Sharp Zaurus models Spitz (SL-C3000),
Akita (SL-C1000) and Borzoi (SL-C3100)
Signed-off-by: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NDavid Woodhouse <dwmw2@infradead.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This hunk from the sharpsl/corgi backlight update appears to have got lost
somewhere along the way.  Its needed to match the other changes.
Signed-Off-By: NRichard Purdie <rpurdie@rpsys.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes a signedness bug with RAID6 for Altivec, and makes the
Altivec code testable in userspace.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Signed-off-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Sitecom DC-105 PCI work with hfc_pci HiSax driver
Signed-off-by: NKarsten Keil <kkeil@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>