Allow to set the over-provision percentage on target creation. In case
that the value is not provided, fall back to the default value set by
the target.

In pblk, set the default OP to 11% of the total size of the device
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NHans Holmberg <hans.holmberg@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Until now, target unique naming is only guaranteed per device. This is
ok from a lightnvm perspective, but not from a sysfs one, since groups
will collide regardless of the underlying device.

Check that names are unique across all lightnvm-capable devices.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Refactor target type lookup to use/not use locks explicitly instead of
using a hidden parameter to make the function locking.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Prepare for the 2.0 revision by adapting the geometry
structures to coexist with the 1.2 revision.
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

The lower page table is unused. All page tables reported by 1.2
devices are all reporting a sequential 1:1 page mapping. This is
also not used going forward with the 2.0 revision.
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Now that rrpc have been removed. Also remove the hybrid 1.2 support
from the core.
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Christoph correctly points out that this issue is no different
for other block devices, and poking at cross layer internals
is not the right way to solve it.

This reverts commit bb6aa6f0.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Implement a generic path for sending sync I/O on LightNVM. This allows
to reuse the standard synchronous path trough blk_execute_rq(), instead
of implementing a wait_for_completion on the target side (e.g., pblk).
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Not all exported symbols are being used outside core and there were
some stale entries in lightnvm.h
Signed-off-by: NRakesh Pandit <rakesh@tuxera.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

vblk isn't being used anyway and if we ever have a usecase we can
introduce this again.  This makes the logic easier and removes
unnecessary checks.
Signed-off-by: NRakesh Pandit <rakesh@tuxera.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Remove repeated calculation for number of channels while creating a
target device.
Signed-off-by: NRakesh Pandit <rakesh@tuxera.com>
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

nvm_tgt_types list was protected by wrong lock for NVM_INFO ioctl call
and can race with addition or removal of target types.  Also
unregistering target type was not protected correctly.

Fixes: 5cd90785 ("lightnvm: remove nested lock conflict with mm")
Signed-off-by: NRakesh Pandit <rakesh@tuxera.com>
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When a virtual block device is formatted and mounted after creating
with "nvme lnvm create... -t pblk", a removal from "nvm lnvm remove"
would result in this:

446416.309757] bdi-block not registered
[446416.309773] ------------[ cut here ]------------
[446416.309780] WARNING: CPU: 3 PID: 4319 at fs/fs-writeback.c:2159
  __mark_inode_dirty+0x268/0x340

Ideally removal should return -EBUSY as block device is mounted after
formatting.  This patch tries to address this checking if whole device
or any partition of it already mounted or not before removal.

Whole device is checked using "bd_super" member of block device.  This
member is always set once block device has been mounted using a
filesystem.  Another member "bd_part_count" takes care of checking any
if any partitions are under use.  "bd_part_count" is only updated
under locks when partitions are opened or closed (first open and last
release).  This at least does take care sending -EBUSY if removal is
being attempted while whole block device or any partition is mounted.
Signed-off-by: NRakesh Pandit <rakesh@tuxera.com>
Reviewed-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If target type module e.g. pblk here is unloaded (rmmod) while module
is in use (after creating target) system crashes.  We fix this by
using module API refcnt.
Signed-off-by: NRakesh Pandit <rakesh@tuxera.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

While creating new device with NVM_DEV_CREATE if LUNs are already
allocated ioctl would return -ENOMEM which is wrong.  This patch
propagates -EBUSY from nvm_reserve_luns which is correct response.

Fixes: ade69e24 ("lightnvm: merge gennvm with core")
Reviewed-by: NFrans Klaver <fransklaver@gmail.com>
Signed-off-by: NRakesh Pandit <rakesh@tuxera.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

In case of a failure when submitting a request, convert the ppa_list
addresses to the target format so that it can interpret ppas for
recovery
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Free memory correctly when an allocation fails on a loop and we free
backwards previously successful allocations.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Reviewed-by: NMatias Bjørling <matias@cnexlabs.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

From userspace calling ioctl(NVM_DEV_CREATE) was returning ENOMEM for
invalid arguments even though pblk (pblk_init) was returning correctly
-EINVAL to nvm_create_tgt inside core.  This patch propagates the
correct return value to userspace.

Because pblk was introduced recently this only needs to go in 4.12.

Fixes: a4bd217b ("lightnvm: physical block device (pblk) target")
Signed-off-by: NRakesh Pandit <rakesh@tuxera.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

On an error path in NVM_DEV_CREATE ioctl blk_put_queue is being called
twice: one via blk_cleanup_queue and another via put_disk.  Straight fix
seems to remove queue pointer so that disk_release never ends up caling
blk_put_queue again.

  [  391.808827] WARNING: CPU: 1 PID: 1250 at lib/refcount.c:128 refcount_sub_and_test+0x70/0x80
  [  391.808830] refcount_t: underflow; use-after-free.
  [ 391.808832] Modules linked in: nf_conntrack_netbios_ns............
  [  391.809052] CPU: 1 PID: 1250 Comm: nvme Not tainted.........
  [  391.809057] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
             BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014
  [  391.809060] Call Trace:
  [  391.809079]  dump_stack+0x63/0x86
  [  391.809094]  __warn+0xcb/0xf0
  [  391.809103]  warn_slowpath_fmt+0x5f/0x80
  [  391.809118]  refcount_sub_and_test+0x70/0x80
  [  391.809125]  refcount_dec_and_test+0x11/0x20
  [  391.809136]  kobject_put+0x1f/0x60
  [  391.809149]  blk_put_queue+0x15/0x20
  [  391.809159]  disk_release+0xae/0xf0
  [  391.809172]  device_release+0x32/0x90
  [  391.809184]  kobject_release+0x6a/0x170
  [  391.809196]  kobject_put+0x2f/0x60
  [  391.809206]  put_disk+0x17/0x20
  [  391.809219]  nvm_ioctl_dev_create.isra.16+0x897/0xa30
  [  391.809236]  nvm_ctl_ioctl+0x23c/0x4c0
  [  391.809248]  do_vfs_ioctl+0xa3/0x5f0
  [  391.809258]  SyS_ioctl+0x79/0x90
  [  391.809271]  entry_SYSCALL_64_fastpath+0x1a/0xa9
  [  391.809280] RIP: 0033:0x7f5d3ef363c7
  [  391.809286] RSP: 002b:00007ffc72ed8d78 EFLAGS: 00000206 ORIG_RAX: 0000000000000010
  [  391.809296] RAX: ffffffffffffffda RBX: 00007ffc72edb552 RCX: 00007f5d3ef363c7
  [  391.809301] RDX: 00007ffc72ed8d90 RSI: 0000000040804c22 RDI: 0000000000000003
  [  391.809306] RBP: 0000000000000001 R08: 0000000000000020 R09: 0000000000000001
  [  391.809311] R10: 000000000000053f R11: 0000000000000206 R12: 0000000000000000
  [  391.809316] R13: 0000000000000000 R14: 00007ffc72edb58d R15: 00007ffc72edb581
Signed-off-by: NRakesh Pandit <rakesh@tuxera.com>
Reviewed-by: NMatias Bjørling <matias@cnexlabs.com>
Fixes: 7d1ef2f4 "lightnvm: fix cleanup order of disk on init error"
Signed-off-by: NJens Axboe <axboe@fb.com>

Convert sprintf calls to strlcpy in order to make possible buffer
overflow more obvious.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Clean unused variable on lightnvm core.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Prefix the nvm_free static function with a missing static keyword.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Target initialization has two responsibilities: creating the target
partition and instantiating the target. This patch enables to create a
factory partition (e.g., do not trigger recovery on the given target).
This is useful for target development and for being able to restore the
device state at any moment in time without requiring a full-device
erase.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Reorder disk allocation such that the disk structure can be put
safely.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The dev->lun_map bits are cleared twice if an target init error occurs.
First in the target clean routine, and then next in the nvm_tgt_create
error function. Make sure that it is only cleared once by extending
nvm_remove_tgt_devi() with a clear bit, such that clearing of bits can
ignored when cleaning up a successful initialized target.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Fix style.
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Free the reverse mapping table correctly on target tear down
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Until now erases have been submitted as synchronous commands through a
dedicated erase function. In order to enable targets implementing
asynchronous erases, refactor the erase path so that it uses the normal
async I/O submission functions. If a target requires sync I/O, it can
implement it internally. Also, adapt rrpc to use the new erase path.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Fixed spelling error.
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The create target ioctl takes a lun begin and lun end parameter, which
defines the range of luns to initialize a target with. If the user does
not set the parameters, it default to only using lun 0. Instead,
defaults to use all luns in the OCSSD, as it is the usual behaviour
users want.
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

If one specifies the end lun id to be the absolute number of luns,
without taking zero indexing into account, the lightnvm core will pass
the off-by-one end lun id to target creation, which then panics during
nvm_ioctl_dev_create.
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

In order to register through the sysfs interface, a driver needs to know
its kobject. On a disk structure, this happens when the partition
information is added (device_add_disk), which for lightnvm takes place
after the target has been initialized. This means that on target
initialization, the kboject has not been created yet.

This patch adds a target function to let targets initialize their own
kboject as a child of the disk kobject.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Added exit typedef and passed gendisk instead of void pointer for exit.
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Fix a memory leak when target creation fails. More specifically, free
the entire device structure given to the target (tgt_dev).
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

When the lightnvm core had the "gennvm" layer between the device and the
target, there was a need for the core to be able to figure out which
target it should send an end_io callback to. Leading to a "double"
end_io, first for the media manager instance, and then for the target
instance. Now that core and gennvm is merged, there is no longer a need
for this, and a single end_io callback will do.
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The number of configuration groups has been limited to one in current
code, even if there is support for up to four. With the introduction
of the open-channel SSD 1.3 specification, only a single
group is exposed onwards. Reflect this in the nvm_id structure.
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Going from target specific ppa addresses to device was accomplished by
first converting target to generic ppa addresses and generic to device
addresses. The conversion was either open-coded or used the built-in
nvm_trans_* and nvm_map_* functions for conversion. Simplify the
interface and cleanup the calls to provide clean functions that now
either take a list of ppas or a nvm_rq, and is exposed through:

 void nvm_ppa_* - target to/from device with a list of PPAs,
 void nvm_rq_* - target to/from device with a nvm_rq.
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The only check there was done was a debugging check. Remove it and
replace the return value with void to reduce error checking.
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Since the merge of gennvm and core, there is no longer a need for the
device specific bad block functions.
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

The nvm_submit_ppa* functions are no longer needed after gennvm and core
have been merged.
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

After gennvm and core have been merged, there are no more callers to
nvm_erase_ppa. Therefore collapse the device specific and target
specific erase functions.
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

For the first iteration of Open-Channel SSDs, it was anticipated that
there could be various media managers on top of an open-channel SSD,
such to allow vendors to plug in their own host-side FTLs, without the
media manager in between.

Now that an Open-Channel SSD is exposed as a traditional block device,
there is no longer a need for this. Therefore lets merge the gennvm code
with core and simplify the stack.
Signed-off-by: NMatias Bjørling <matias@cnexlabs.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Since targets are given a virtual target device, it is necessary to
translate all communication between targets and the backend device.
Implement the translation layer for get/set bad block table.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Signed-off-by: NMatias Bjørling <m@bjorling.me>
Signed-off-by: NJens Axboe <axboe@fb.com>