Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 02 3月, 2017 1 次提交
  3. 17 2月, 2017 3 次提交
  5. 15 2月, 2017 4 次提交
    • P
      kvm: x86: do not use KVM_REQ_EVENT for APICv interrupt injection · b95234c8
      由 Paolo Bonzini 提交于 
      Since bf9f6ac8 ("KVM: Update Posted-Interrupts Descriptor when vCPU
is blocked", 2015-09-18) the posted interrupt descriptor is checked
unconditionally for PIR.ON.  Therefore we don't need KVM_REQ_EVENT to
trigger the scan and, if NMIs or SMIs are not involved, we can avoid
the complicated event injection path.

Calling kvm_vcpu_kick if PIR.ON=1 is also useless, though it has been
there since APICv was introduced.

However, without the KVM_REQ_EVENT safety net KVM needs to be much
more careful about races between vmx_deliver_posted_interrupt and
vcpu_enter_guest.  First, the IPI for posted interrupts may be issued
between setting vcpu->mode = IN_GUEST_MODE and disabling interrupts.
If that happens, kvm_trigger_posted_interrupt returns true, but
smp_kvm_posted_intr_ipi doesn't do anything about it.  The guest is
entered with PIR.ON, but the posted interrupt IPI has not been sent
and the interrupt is only delivered to the guest on the next vmentry
(if any).  To fix this, disable interrupts before setting vcpu->mode.
This ensures that the IPI is delayed until the guest enters non-root mode;
it is then trapped by the processor causing the interrupt to be injected.

Second, the IPI may be issued between kvm_x86_ops->sync_pir_to_irr(vcpu)
and vcpu->mode = IN_GUEST_MODE.  In this case, kvm_vcpu_kick is called
but it (correctly) doesn't do anything because it sees vcpu->mode ==
OUTSIDE_GUEST_MODE.  Again, the guest is entered with PIR.ON but no
posted interrupt IPI is pending; this time, the fix for this is to move
the RVI update after IN_GUEST_MODE.

Both issues were mostly masked by the liberal usage of KVM_REQ_EVENT,
though the second could actually happen with VT-d posted interrupts.
In both race scenarios KVM_REQ_EVENT would cancel guest entry, resulting
in another vmentry which would inject the interrupt.

This saves about 300 cycles on the self_ipi_* tests of vmexit.flat.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      b95234c8
    • P
      KVM: x86: do not scan IRR twice on APICv vmentry · 76dfafd5
      由 Paolo Bonzini 提交于 
      Calls to apic_find_highest_irr are scanning IRR twice, once
in vmx_sync_pir_from_irr and once in apic_search_irr.  Change
sync_pir_from_irr to get the new maximum IRR from kvm_apic_update_irr;
now that it does the computation, it can also do the RVI write.

In order to avoid complications in svm.c, make the callback optional.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      76dfafd5
    • P
      KVM: vmx: move sync_pir_to_irr from apic_find_highest_irr to callers · 3d92789f
      由 Paolo Bonzini 提交于 
      Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      3d92789f
    • P
      kvm: nVMX: move nested events check to kvm_vcpu_running · 0ad3bed6
      由 Paolo Bonzini 提交于 
      vcpu_run calls kvm_vcpu_running, not kvm_arch_vcpu_runnable,
and the former does not call check_nested_events.

Once KVM_REQ_EVENT is removed from the APICv interrupt injection
path, however, this would leave no place to trigger a vmexit
from L2 to L1, causing a missed interrupt delivery while in guest
mode.  This is caught by the "ack interrupt on exit" test in
vmx.flat.

[This does not change the calls to check_nested_events in
 inject_pending_event.  That is material for a separate cleanup.]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      0ad3bed6
  7. 09 2月, 2017 1 次提交
    • A
      KVM: x86: hide KVM_HC_CLOCK_PAIRING on 32 bit · 8ef81a9a
      由 Arnd Bergmann 提交于 
      The newly added hypercall doesn't work on x86-32:

arch/x86/kvm/x86.c: In function 'kvm_pv_clock_pairing':
arch/x86/kvm/x86.c:6163:6: error: implicit declaration of function 'kvm_get_walltime_and_clockread';did you mean 'kvm_get_time_scale'? [-Werror=implicit-function-declaration]

This adds an #ifdef around it, matching the one around the related
functions that are also only implemented on 64-bit systems.

Fixes: 55dd00a7 ("KVM: x86: add KVM_HC_CLOCK_PAIRING hypercall")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      8ef81a9a
  9. 08 2月, 2017 2 次提交
  11. 04 2月, 2017 1 次提交
  13. 27 1月, 2017 1 次提交
  15. 17 1月, 2017 1 次提交
    • D
      KVM: x86: fix fixing of hypercalls · ce2e852e
      由 Dmitry Vyukov 提交于 
      emulator_fix_hypercall() replaces hypercall with vmcall instruction,
but it does not handle GP exception properly when writes the new instruction.
It can return X86EMUL_PROPAGATE_FAULT without setting exception information.
This leads to incorrect emulation and triggers
WARN_ON(ctxt->exception.vector > 0x1f) in x86_emulate_insn()
as discovered by syzkaller fuzzer:

WARNING: CPU: 2 PID: 18646 at arch/x86/kvm/emulate.c:5558
Call Trace:
 warn_slowpath_null+0x2c/0x40 kernel/panic.c:582
 x86_emulate_insn+0x16a5/0x4090 arch/x86/kvm/emulate.c:5572
 x86_emulate_instruction+0x403/0x1cc0 arch/x86/kvm/x86.c:5618
 emulate_instruction arch/x86/include/asm/kvm_host.h:1127 [inline]
 handle_exception+0x594/0xfd0 arch/x86/kvm/vmx.c:5762
 vmx_handle_exit+0x2b7/0x38b0 arch/x86/kvm/vmx.c:8625
 vcpu_enter_guest arch/x86/kvm/x86.c:6888 [inline]
 vcpu_run arch/x86/kvm/x86.c:6947 [inline]

Set exception information when write in emulator_fix_hypercall() fails.
Signed-off-by: NDmitry Vyukov <dvyukov@google.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Wanpeng Li <wanpeng.li@hotmail.com>
Cc: kvm@vger.kernel.org
Cc: syzkaller@googlegroups.com
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
      ce2e852e
  17. 12 1月, 2017 2 次提交
    • W
      KVM: x86: fix NULL deref in vcpu_scan_ioapic · 546d87e5
      由 Wanpeng Li 提交于 
      Reported by syzkaller:

    BUG: unable to handle kernel NULL pointer dereference at 00000000000001b0
    IP: _raw_spin_lock+0xc/0x30
    PGD 3e28eb067
    PUD 3f0ac6067
    PMD 0
    Oops: 0002 [#1] SMP
    CPU: 0 PID: 2431 Comm: test Tainted: G           OE   4.10.0-rc1+ #3
    Call Trace:
     ? kvm_ioapic_scan_entry+0x3e/0x110 [kvm]
     kvm_arch_vcpu_ioctl_run+0x10a8/0x15f0 [kvm]
     ? pick_next_task_fair+0xe1/0x4e0
     ? kvm_arch_vcpu_load+0xea/0x260 [kvm]
     kvm_vcpu_ioctl+0x33a/0x600 [kvm]
     ? hrtimer_try_to_cancel+0x29/0x130
     ? do_nanosleep+0x97/0xf0
     do_vfs_ioctl+0xa1/0x5d0
     ? __hrtimer_init+0x90/0x90
     ? do_nanosleep+0x5b/0xf0
     SyS_ioctl+0x79/0x90
     do_syscall_64+0x6e/0x180
     entry_SYSCALL64_slow_path+0x25/0x25
    RIP: _raw_spin_lock+0xc/0x30 RSP: ffffa43688973cc0

The syzkaller folks reported a NULL pointer dereference due to
ENABLE_CAP succeeding even without an irqchip.  The Hyper-V
synthetic interrupt controller is activated, resulting in a
wrong request to rescan the ioapic and a NULL pointer dereference.

    #include <sys/ioctl.h>
    #include <sys/mman.h>
    #include <sys/types.h>
    #include <linux/kvm.h>
    #include <pthread.h>
    #include <stddef.h>
    #include <stdint.h>
    #include <stdlib.h>
    #include <string.h>
    #include <unistd.h>

    #ifndef KVM_CAP_HYPERV_SYNIC
    #define KVM_CAP_HYPERV_SYNIC 123
    #endif

    void* thr(void* arg)
    {
	struct kvm_enable_cap cap;
	cap.flags = 0;
	cap.cap = KVM_CAP_HYPERV_SYNIC;
	ioctl((long)arg, KVM_ENABLE_CAP, &cap);
	return 0;
    }

    int main()
    {
	void *host_mem = mmap(0, 0x1000, PROT_READ|PROT_WRITE,
			MAP_PRIVATE|MAP_ANONYMOUS, -1, 0);
	int kvmfd = open("/dev/kvm", 0);
	int vmfd = ioctl(kvmfd, KVM_CREATE_VM, 0);
	struct kvm_userspace_memory_region memreg;
	memreg.slot = 0;
	memreg.flags = 0;
	memreg.guest_phys_addr = 0;
	memreg.memory_size = 0x1000;
	memreg.userspace_addr = (unsigned long)host_mem;
	host_mem[0] = 0xf4;
	ioctl(vmfd, KVM_SET_USER_MEMORY_REGION, &memreg);
	int cpufd = ioctl(vmfd, KVM_CREATE_VCPU, 0);
	struct kvm_sregs sregs;
	ioctl(cpufd, KVM_GET_SREGS, &sregs);
	sregs.cr0 = 0;
	sregs.cr4 = 0;
	sregs.efer = 0;
	sregs.cs.selector = 0;
	sregs.cs.base = 0;
	ioctl(cpufd, KVM_SET_SREGS, &sregs);
	struct kvm_regs regs = { .rflags = 2 };
	ioctl(cpufd, KVM_SET_REGS, &regs);
	ioctl(vmfd, KVM_CREATE_IRQCHIP, 0);
	pthread_t th;
	pthread_create(&th, 0, thr, (void*)(long)cpufd);
	usleep(rand() % 10000);
	ioctl(cpufd, KVM_RUN, 0);
	pthread_join(th, 0);
	return 0;
    }

This patch fixes it by failing ENABLE_CAP if without an irqchip.
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Fixes: 5c919412 (kvm/x86: Hyper-V synthetic interrupt controller)
Cc: stable@vger.kernel.org # 4.5+
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: NWanpeng Li <wanpeng.li@hotmail.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      546d87e5
    • D
      KVM: x86: flush pending lapic jump label updates on module unload · cef84c30
      由 David Matlack 提交于 
      KVM's lapic emulation uses static_key_deferred (apic_{hw,sw}_disabled).
These are implemented with delayed_work structs which can still be
pending when the KVM module is unloaded. We've seen this cause kernel
panics when the kvm_intel module is quickly reloaded.

Use the new static_key_deferred_flush() API to flush pending updates on
module unload.
Signed-off-by: NDavid Matlack <dmatlack@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      cef84c30
  19. 09 1月, 2017 8 次提交
  21. 25 12月, 2016 2 次提交
  23. 24 12月, 2016 1 次提交
  25. 19 12月, 2016 2 次提交
  27. 17 12月, 2016 1 次提交
  29. 08 12月, 2016 3 次提交
    • L
      KVM: nVMX: introduce nested_vmx_load_cr3 and call it on vmentry · 9ed38ffa
      由 Ladi Prosek 提交于 
      Loading CR3 as part of emulating vmentry is different from regular CR3 loads,
as implemented in kvm_set_cr3, in several ways.

* different rules are followed to check CR3 and it is desirable for the caller
to distinguish between the possible failures
* PDPTRs are not loaded if PAE paging and nested EPT are both enabled
* many MMU operations are not necessary

This patch introduces nested_vmx_load_cr3 suitable for CR3 loads as part of
nested vmentry and vmexit, and makes use of it on the nested vmentry path.
Signed-off-by: NLadi Prosek <lprosek@redhat.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
      9ed38ffa
    • K
      KVM: x86: Do not clear RFLAGS.TF when a singlestep trap occurs. · ea07e42d
      由 Kyle Huey 提交于 
      The trap flag stays set until software clears it.
Signed-off-by: NKyle Huey <khuey@kylehuey.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
      ea07e42d
    • K
      KVM: x86: Add kvm_skip_emulated_instruction and use it. · 6affcbed
      由 Kyle Huey 提交于 
      kvm_skip_emulated_instruction calls both
kvm_x86_ops->skip_emulated_instruction and kvm_vcpu_check_singlestep,
skipping the emulated instruction and generating a trap if necessary.

Replacing skip_emulated_instruction calls with
kvm_skip_emulated_instruction is straightforward, except for:

- ICEBP, which is already inside a trap, so avoid triggering another trap.
- Instructions that can trigger exits to userspace, such as the IO insns,
  MOVs to CR8, and HALT. If kvm_skip_emulated_instruction does trigger a
  KVM_GUESTDBG_SINGLESTEP exit, and the handling code for
  IN/OUT/MOV CR8/HALT also triggers an exit to userspace, the latter will
  take precedence. The singlestep will be triggered again on the next
  instruction, which is the current behavior.
- Task switch instructions which would require additional handling (e.g.
  the task switch bit) and are instead left alone.
- Cases where VMLAUNCH/VMRESUME do not proceed to the next instruction,
  which do not trigger singlestep traps as mentioned previously.
Signed-off-by: NKyle Huey <khuey@kylehuey.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>
      6affcbed
  31. 25 11月, 2016 1 次提交
  33. 23 11月, 2016 1 次提交
  35. 22 11月, 2016 1 次提交
    • P
      x86/kvm: Support the vCPU preemption check · 0b9f6c46
      由 Pan Xinhui 提交于 
      Support the vcpu_is_preempted() functionality under KVM. This will
enhance lock performance on overcommitted hosts (more runnable vCPUs
than physical CPUs in the system) as doing busy waits for preempted
vCPUs will hurt system performance far worse than early yielding.

Use struct kvm_steal_time::preempted to indicate that if a vCPU
is running or not.
Signed-off-by: NPan Xinhui <xinhui.pan@linux.vnet.ibm.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Cc: David.Laight@ACULAB.COM
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: benh@kernel.crashing.org
Cc: boqun.feng@gmail.com
Cc: borntraeger@de.ibm.com
Cc: bsingharora@gmail.com
Cc: dave@stgolabs.net
Cc: jgross@suse.com
Cc: kernellwp@gmail.com
Cc: konrad.wilk@oracle.com
Cc: linuxppc-dev@lists.ozlabs.org
Cc: mpe@ellerman.id.au
Cc: paulmck@linux.vnet.ibm.com
Cc: paulus@samba.org
Cc: rkrcmar@redhat.com
Cc: virtualization@lists.linux-foundation.org
Cc: will.deacon@arm.com
Cc: xen-devel-request@lists.xenproject.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1478077718-37424-9-git-send-email-xinhui.pan@linux.vnet.ibm.com
[ Typo fixes. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      0b9f6c46
  37. 20 11月, 2016 4 次提交